I just realized that I have an AMD64 system and I forgot to mention that... shoot me. Raido wrote: > After some searching I actualy figured out where the change had to be > made, but still no luck. Now from dmesg: > dst_get_device_id: Recognise [DCT-CI] > DST type flags : 0x1 newtuner 0x10 firmware version = 2 > > Unfortunately scan still gives me: > scan -v est > channels.conf > scanning est > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 322000000 6875000 0 5 > >>> tune to: 322000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_256 > >>> tuning status == 0x00 > ... > >>> tuning status == 0x00 > WARNING: >>> tuning failed!!! > >>> tune to: 322000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_256 > (tuning failed) > >>> tuning status == 0x00 > ... > >>> tuning status == 0x00 > WARNING: >>> tuning failed!!! > ERROR: initial tuning failed > dumping lists (0 services) > Done. > > Perhaps someone could send me a working version of drivers? > > > > Per Dal?n wrote: > >> Hi, >> >> I have the same card as You and I had also problems with >> tuning/scaning berfore I changed the dst_tlist[] to be >> ".type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2" as Manu >> suggested. >> I have not tested the new combined v4l/dvb cvs yet (hope that I will >> find som time for that during the weekend). >> So try to change and see if it makes any difference. >> >> regards >> Per Dal?n >> >> Raido wrote: >> >>> >From what I can tell, they already have a channels.conf, but I am >>> unable to create one. >>> >>> Svein Olav Bjerkeset wrote: >>> >>>> Hi, >>>> >>>> Check this link from the mailing list archive: >>>> >>>> http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004866.html >>>> >>>> Svein Olav Bjerkeset >>>> >>>> >>>> >>>>> Hi, >>>>> >>>>> I have a Twinhan Cab-CI card and I've been trying to get it to >>>>> work in >>>>> my Debian machine, I want to use it as a MythTV backend >>>>> eventually. The >>>>> card is a model 20310(says so on the box). At first I tried it >>>>> with the >>>>> drivers that came with 2.6.14.1, but all I got from scan was ">>> >>>>> tuning status == 0x00". So I tried the more-or-less latest CVS and a >>>>> snapshot, but the only difference was that the scanning got faster(it >>>>> was very slow at first). Right now I compiled a 2.6.14.3 kernel >>>>> without >>>>> any DVB drivers(only the dvb-core) included and installed the CVS >>>>> versions, again only >>> tuning status == 0x00. >>>>> >>>>> So I'm wondering, does this card work at all? I understand that there >>>>> are different versions? Also, all my channels are encrypted with >>>>> Conax, >>>>> but I do have a CAM and it works in my win machine. Nevertheless, >>>>> I was >>>>> under the impression, that I should still be able to detect the >>>>> channels, just not watch them, if the CAM part doesn't work? >>>>> >>>>> It's very likely I'm just doing something wrong or missing a step... >>>>> >>>>> Raido >>>>> >>>>> part of dmesg: >>>>> >>>>> Linux video capture interface: v1.00 >>>>> bttv: driver version 0.9.16 loaded >>>>> bttv: using 8 buffers with 2080k (520 pages) each for capture >>>>> bttv: Bt8xx card found (0). >>>>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 >>>>> ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level, >>>>> low) -> IRQ 17 >>>>> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 17, latency: 64, mmio: >>>>> 0xfaafe000 >>>>> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem >>>>> ID is >>>>> 1822:0001 >>>>> bttv0: using: Twinhan DST + clones [card=113,autodetected] >>>>> bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init] >>>>> bttv0: using tuner=4 >>>>> bttv0: add subdevice "dvb0" >>>>> bt878: AUDIO driver version 0.0.0 loaded >>>>> bt878: Bt878 AUDIO function found (0). >>>>> ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKB] -> GSI 19 (level, >>>>> low) -> IRQ 17 >>>>> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 17, latency: 64, memory: >>>>> 0xfaaff000 >>>>> DVB: registering new adapter (bttv0). >>>>> dst_get_device_id: Recognise [DCT-CI] >>>>> >>>>> DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 >>>>> firmware version = 2 >>>>> dst_get_mac: MAC Address=[00:08:ca:16:15:00] >>>>> dst_ca_attach: registering DST-CA device >>>>> DVB: registering frontend 0 (DST DVB-C)... >>>>> > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
