Hi, I have the same card as You and I had also problems with tuning/scaning berfore I changed the dst_tlist[] to be ".type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2" as Manu suggested. I have not tested the new combined v4l/dvb cvs yet (hope that I will find som time for that during the weekend). So try to change and see if it makes any difference. regards Per Dal?n Raido wrote: > >From what I can tell, they already have a channels.conf, but I am > unable to create one. > > Svein Olav Bjerkeset wrote: > >>Hi, >> >>Check this link from the mailing list archive: >> >>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004866.html >> >>Svein Olav Bjerkeset >> >> >> >>>Hi, >>> >>>I have a Twinhan Cab-CI card and I've been trying to get it to work in >>>my Debian machine, I want to use it as a MythTV backend eventually. The >>>card is a model 20310(says so on the box). At first I tried it with the >>>drivers that came with 2.6.14.1, but all I got from scan was ">>> >>>tuning status == 0x00". So I tried the more-or-less latest CVS and a >>>snapshot, but the only difference was that the scanning got faster(it >>>was very slow at first). Right now I compiled a 2.6.14.3 kernel without >>>any DVB drivers(only the dvb-core) included and installed the CVS >>>versions, again only >>> tuning status == 0x00. >>> >>>So I'm wondering, does this card work at all? I understand that there >>>are different versions? Also, all my channels are encrypted with Conax, >>>but I do have a CAM and it works in my win machine. Nevertheless, I was >>>under the impression, that I should still be able to detect the >>>channels, just not watch them, if the CAM part doesn't work? >>> >>>It's very likely I'm just doing something wrong or missing a step... >>> >>>Raido >>> >>>part of dmesg: >>> >>>Linux video capture interface: v1.00 >>>bttv: driver version 0.9.16 loaded >>>bttv: using 8 buffers with 2080k (520 pages) each for capture >>>bttv: Bt8xx card found (0). >>>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 >>>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level, >>>low) -> IRQ 17 >>>bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 17, latency: 64, mmio: >>>0xfaafe000 >>>bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is >>>1822:0001 >>>bttv0: using: Twinhan DST + clones [card=113,autodetected] >>>bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init] >>>bttv0: using tuner=4 >>>bttv0: add subdevice "dvb0" >>>bt878: AUDIO driver version 0.0.0 loaded >>>bt878: Bt878 AUDIO function found (0). >>>ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKB] -> GSI 19 (level, >>>low) -> IRQ 17 >>>bt878(0): Bt878 (rev 17) at 02:07.1, irq: 17, latency: 64, memory: >>>0xfaaff000 >>>DVB: registering new adapter (bttv0). >>>dst_get_device_id: Recognise [DCT-CI] >>> >>>DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 >>>firmware version = 2 >>>dst_get_mac: MAC Address=[00:08:ca:16:15:00] >>>dst_ca_attach: registering DST-CA device >>>DVB: registering frontend 0 (DST DVB-C)... >>> >>> >>> >>>_______________________________________________ >>> >>>linux-dvb@xxxxxxxxxxx >>>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >>> >>> >>> >> >> >> >> >> > > ------------------------------------------------------------------------ > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
