Hi, Check this link from the mailing list archive: http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004866.html Svein Olav Bjerkeset > Hi, > > I have a Twinhan Cab-CI card and I've been trying to get it to work in > my Debian machine, I want to use it as a MythTV backend eventually. The > card is a model 20310(says so on the box). At first I tried it with the > drivers that came with 2.6.14.1, but all I got from scan was ">>> > tuning status == 0x00". So I tried the more-or-less latest CVS and a > snapshot, but the only difference was that the scanning got faster(it > was very slow at first). Right now I compiled a 2.6.14.3 kernel without > any DVB drivers(only the dvb-core) included and installed the CVS > versions, again only >>> tuning status == 0x00. > > So I'm wondering, does this card work at all? I understand that there > are different versions? Also, all my channels are encrypted with Conax, > but I do have a CAM and it works in my win machine. Nevertheless, I was > under the impression, that I should still be able to detect the > channels, just not watch them, if the CAM part doesn't work? > > It's very likely I'm just doing something wrong or missing a step... > > Raido > > part of dmesg: > > Linux video capture interface: v1.00 > bttv: driver version 0.9.16 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 > ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level, > low) -> IRQ 17 > bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 17, latency: 64, mmio: > 0xfaafe000 > bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is > 1822:0001 > bttv0: using: Twinhan DST + clones [card=113,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init] > bttv0: using tuner=4 > bttv0: add subdevice "dvb0" > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKB] -> GSI 19 (level, > low) -> IRQ 17 > bt878(0): Bt878 (rev 17) at 02:07.1, irq: 17, latency: 64, memory: > 0xfaaff000 > DVB: registering new adapter (bttv0). > dst_get_device_id: Recognise [DCT-CI] > > DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 > firmware version = 2 > dst_get_mac: MAC Address=[00:08:ca:16:15:00] > dst_ca_attach: registering DST-CA device > DVB: registering frontend 0 (DST DVB-C)... > > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
