Hi, Martin
It makes mo sense to play with these card types. Of course you might
have a card variant we haven't heard of yet but it must have a younger
tuner. We need to get you a younger CVS snapshot. If nothing helps, i can
send it as a mail attachment (about 600k)
Best regards
Hartmut
martin.fay@xxxxxxxx wrote:
> Hi Hartmut,
>
> short update what i'am testing so far:
> Card=12 gives me a DVB device but the Tuner Led on the Card stays off
> Card=18 turnes the TunerLed on but no DVB Device
> Card=23 turnes the TunerLed on but no DVB Device
>
> whit card=12 i was able to start Kaffeine and search for DVB-T Channels but nothing came up
>
> Hope this can halp a bit so far.
> I can't access from here the CVS (Blocked Service)
>
> Best Regards
> Martin
>
> ----- Original Nachricht ----
> Von: Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx>
> An: martin.fay@xxxxxxxx
> Datum: 03.11.2005 22:10
> Betreff: Re: Aw: Re: [linux-dvb] Typhoon Duo DVB-T Cardbus with saa7133 won't
> comeup
>
>
>>Hi, Martin
>>
>>The fan starts as soon as the driver is initialized. Unfortunately, there
>>is no way to control it besides turning it on and off. But this is hard
>>coded and needs to be this way.
>>If you still have problems after updating the driver, please report. The
>>first step is to pose the kernel log generated by the driver.
>>
>>Good luck
>> Hartmut
>>
>>martin.fay@xxxxxxxx wrote:
>>
>>>Hi Nico & Hartmut,
>>>
>>>thanks for your answer.
>>>i was trying it whit Card=55 & 60. 55 seems to be working. 60 is a no go
>>
>>one.
>>
>>>I am going to try out Hartmut's step's and will proceed whit Results to
>>
>>the comunity.
>>
>>>@Hartmut will the fan start to spinn after the card is correctly
>>
>>initzilized???
>>
>>>could it be possible to control the RPM's of the fan by the Driver e.g.
>>
>>like +&- key
>>
>>>just a wird idea ;-)
>>>
>>>tx&later
>>>
>>>Martin
>>>
>>>
>>>
>>>>and see what happens. So:
>>>>modprobe saa7134 card=55
>>>>modprobe saa7134-dvb
>>>
>>>
>>>^^^^^^^^^^^^^^^^^^^^^^^^^^ Is this one requered for DVB-T ?
>>>after issuing this i did't see a msg at all in dmsg, ist this correct
>>
>>?????
>>
>>>
>>>>You don't need a firmware file, the card should have an eeprom and
>>>>boot from this.
>>>>You might consider to update the drivers from linuxtv.org first,
>>>>please get the v4l-kernel and dvb-kernel CVS and follow the
>>>>instructions in the wiki. I just added some updates.
>>>>
>>>>Good luck
>>>> Hartmut
>>>>
>>>>Nico Sabbi wrote:
>>>>
>>>>
>>>>>Martin Fay wrote:
>>>>>
>>>>>
>>>>>
>>>>>>Hi Folks,
>>>>>>
>>>>>>first tx for all of yor great work!
>>>>>>
>>>>>>And now i have a problem
>>>>>>This card will not work in Suse or Ubuntu.
>>>>>>
>>>>>>Card:
>>>>>>Typhoon DVB-T Duo Digital/Analog 32bit Cardbus
>>>>>>
>>>>>>OS:
>>>>>>Ubuntu 5.10
>>>>>>
>>>>>>
>>>>>>
>>>>>>after i did a (root) modprobe saa7134-dvb here is the dmesg output:
>>>>>>
>>>>>>[4306459.391000] Linux video capture interface: v1.00
>>>>>>[4306459.438000] saa7130/34: v4l2 driver version 0.2.12 loaded
>>>>>>[4306459.447000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] ->
>>>>>>GSI 11 (level, low) -> IRQ 11
>>>>>>[4306459.447000] saa7133[0]: quirk: PCIPCI_NATOMA
>>>>>>[4306459.447000] saa7133[0]: found at 0000:02:00.0, rev: 240, irq: 11,
>>>>>>latency: 64, mmio: 0x10800000
>>>>>>[4306459.447000] saa7133[0]: subsystem: 4e42:0502, board:
>>>>>>UNKNOWN/GENERIC [card=0,autodetected]
>>>>>>
>>>>>>
>>>>>
>>>>>^^^ try to force saa7134 with card= the number assigned to Lifeview DUO
>>>>>
>>>>>
>>>>>
>>>>>>[4306459.447000] saa7133[0]: board init: gpio is e010000
>>>>>>[4306459.448000] saa7133[0]: dsp access wait timeout [bit=WRR]
>>>>>>[4306459.448000] saa7133[0]: dsp access wait timeout [bit=WRR]
>>>>>>[4306459.561000] saa7133[0]: i2c eeprom 00: 42 4e 02 05 54 20 1c 00 43
>>>>>>43 a9 1c 55 d2 b2 92
>>>>>>[4306459.561000] saa7133[0]: i2c eeprom 10: 00 ff 22 0f ff 20 ff ff ff
>>>>>>ff ff ff ff ff ff ff
>>>>>>[4306459.561000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08
>>>>>>ff 01 81 ff ff ff ff
>>>>>>[4306459.561000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
>>>>>>ff ff ff ff ff ff ff
>>>>>>[4306459.618000] saa7133[0]: registered device video0 [v4l2]
>>>>>>[4306459.660000] saa7133[0]: registered device vbi0
>>>>>>
>>>>>>looks like the driver is loadet but i cant access it also i am not so
>>>>>>shure if the firmware file (dvb-fe-tda10046.fw 24 kb ???)
>>>>>>is exactly the right one.
>>>>>>
>>>>>>Can please annyone of you help me here?
>>>>>>
>>>>
>>>>_______________________________________________
>>>>
>>>>linux-dvb@xxxxxxxxxxx
>>>>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>>
>>>
>>>
>>>_______________________________________________
>>>
>>>linux-dvb@xxxxxxxxxxx
>>>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>
>>
>
> _______________________________________________
>
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
