> > I have Pinnacle PCTV sat CI with conax cam and valid subscriber > > card. I can watch FTA channels with Kaffeine but when I try to see > > scrambled channel I get nothing (except next output). > > This card is a Twinhan DST-CI clone whose comon interace is handled by > dst-ci module. So far the status is: > - the dst-ci api is different from the ci api of Hauppauge card (high > level vs low level) > - the only application handling dst-ci api is ca_zap which does not > work for everybody > - vdr handles only low-level ci API and will not work with dst-ci > module (AFAIK, vdr is the only linux application that can handle > decryption) Unfortunately you seem to be right I can't tune using ca_zap. I also found next lines from my dmesg output. dst_command: checksum failure dst_get_mac: Unsupported Command I am little suspicious that those lines relates to some problem. I also had some minor problems with scanning of channels . I used atscscan to scan some channels. The problem with atscscan was that in the result which it gave frequency and polarization was wrong. I correct them manually and then I was able to tune in to channel with szap. But I didn't succeed with ca_zap I only got next output. Using Adpater=[/dev/dvb/adapter0] Frontend=[/dev/dvb/adapter0/frontend0] Demux=[/dev/dvb/adapter0/demux0] Slot=[/dev/dvb/adapter0/ca0] Parsing chan.conf Satellite frontend parse_sat_channel_list: Channel=[BBCW], Frequency=[11325], Satellite=[0], Symbol Rate=[24500], Video=[513], Audio=[644], Service=[577] Service ID=[577] parse_pat: ----------------->parse PAT section parse_pat: PAT => Section Length=[65], TS ID=[1] parse_si: PAT: Close Demux /dev/dvb/adapter0/demux0 I might even consider to help implement some support for cicam to Kaffeine. I said consider because currently I don't have any clue what to do and how big effort it will take. But first of all I like to get this thing to work. Lastly here is complete output of my dmesg and modprobe commands what I gave: modprobe bttv i2c_hw=1 card=0x71 modprobe dst verbose=5 modprobe dvb-bt8xx 16 (level, low) -> IRQ 17 aty128fb: Found Intel x86 BIOS ROM Image aty128fb: Rage128 BIOS located aty128fb: Rage128 TF Ultra AGP [chip rev 0x4] 32M 128-bit SDR SGRAM (1:1) Console: switching to colour frame buffer device 80x30 fb0: ATY Rage128 frame buffer device on Rage128 TF Ultra AGP aty128fb: Rage128 MTRR set to ON b44.c:v0.95 (Aug 3, 2004) PCI: Enabling device 0000:02:05.0 (0004 -> 0006) ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 21 eth0: Broadcom 4400 10/100BaseT Ethernet 00:e0:18:bd:af:01 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). PCI: Enabling device 0000:02:09.0 (0004 -> 0006) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 23 bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 23, latency: 32, mmio: 0xdb000000 bttv0: detected: Pinnacle PCTV SAT CI [card=113], PCI subsystem ID is 11bd:0026 bttv0: using: Twinhan DST + clones [card=113,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fb09fd [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Enabling device 0000:02:09.1 (0004 -> 0006) ACPI: PCI Interrupt 0000:02:09.1[A] -> GSI 21 (level, low) -> IRQ 23 bt878(0): Bt878 (rev 17) at 02:09.1, irq: 23, latency: 32, memory: 0xda800000 Real Time Clock Driver v1.12 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is on for TX and on for RX. NET: Registered protocol family 10 Disabled Privacy Extensions on device c0414260(lo) IPv6 over IPv4 tunneling driver Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [drm] Initialized r128 2.5.0 20030725 on minor 0: eth0: no IPv6 routers present DVB: registering new adapter (bttv0). rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x44 0x53 0x54 0x4d 0x43 0x49 0x3c dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_get_device_id: Recognise [DSTMCI] dst_type_print: DST type: satellite DST type flags : 0x1 newtuner 0x10 firmware version = 2 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 0a 00 00 00 00 00 f6 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 0 read_dst: reply is 0x1c 0x0 0x0 0x0 0x5 0x0 0x0 0x0 dst_command: checksum failure dst_get_mac: Unsupported Command dst_probe: MAC: Unsupported command dst_ca_attach: registering DST-CA device DVB: registering frontend 0 (DST DVB-S)... dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 09 03 b6 00 00 00 3e ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x9 0x3 0xb6 0x0 0x0 0x0 0x3e dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 09 ff b6 01 00 00 41 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 09 ff b6 01 00 00 41 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 08 04 e0 10 38 f2 da ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 13 read_dst: reply is 0x0 0x8 0x4 0xe0 0x10 0x38 0xf2 0xda dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 09 ff 02 01 00 00 f5 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 4 read_dst: reply is 0x0 0x9 0xff 0x2 0x1 0x0 0x0 0xf5 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 09 ff 02 01 00 00 f5 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 4 read_dst: reply is 0x0 0x9 0xff 0x2 0x1 0x0 0x0 0xf5 dst_set_freq: set Frequency 1575000 dst_set_frontend: Set Frequency=[1575000] dst_set_symbolrate: set symrate 24500000 dst_set_polarization: Polarization=[Horizontal] dst_set_frontend: Set Symbolrate=[24500000] dst_write_tuna: type_flags 0x151 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 09 00 06 27 01 00 5f b4 40 76 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 27 read_dst: reply is 0x9 0x0 0x6 0x27 0x18 0x64 0x0 0x3d 0x3 0xe dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x6 0x27 0x19 0xb5 0x80 0x3d 0x3 0x45 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x6 0x27 0x19 0xc9 0x80 0x3d 0x3 0x31 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x6 0x27 0x18 0xa4 0x80 0x3d 0x3 0x57 dst_comm_init: Initializing DST. ...
