After much trial and error I've managed to get the remote to work.
I don't know how to create patches etc... just yet so I've included the
mod's I've made to the saa7134-cards.c and the saa7134-input.c files to
get this to work.
saa7134-cards.c
Below the switch (dev->board) { line I added the following
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
saa7134-input.c
Below the switch (dev->board) { line I added the following
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
ir_codes = videomate_tv_pvr_codes;
mask_keycode = 0x003F00;
mask_keyup = 0x040000;
break;
Once I loaded the saa7134 module I was able to use evdev to see that the
keypresses were corresponding to the correct buttons.
I then grabbed the lirc.conf file from bytesex and created a lircrc file.
Changed lirc to use --driver=dev/input --device=/dev/input/event1 (or what
ever your IR points to) and then started irxevent. Ran Myth and everything
is now working beautifully.
I'm not sure if this is 100% because I basically used trial and error to
get the result but it does work for me :)
Cheers
Nick
