Patrick Boettcher wrote: > >Could you give a short description of what the patch does > >and what "block 300" is? > > Register block 0x300 affects single-PID/group-PID and MAC-filtering. > > The problem was, that after some time of stressing the card with > (re)tuning to a (new) frequency simply no more DMA activities took place. > Reloading the driver solved the problem, because the Flexcop was > reinitialized. > > I now tried to find out, which part of the initialization fixed it. After > some testing (+ finding and curing other problems) it turned out, that > reinitializing register block 0x3xx made it work again. So I simply added > the reset to the start/stop-data-reception-function. > > My affected system is now doing scans for about 6 hours. Without the reset > it took 1 hour at most to have to no-data situation. > > A workaround, because I cannot test the signal-loss-issue > (losing/regaining signal without restarting data reception), but it > can be that this issue is solved as well (with the help of the smaller > changes I made). We have to wait for user comments. OK, thanks for the info. Johannes
