Hi, On Mi, Jun 22, 2005 at 11:24:15 +0200, Johannes Stezenbach wrote: > Patrick Boettcher wrote: > > >Could you give a short description of what the patch does > > >and what "block 300" is? > > > > Register block 0x300 affects single-PID/group-PID and MAC-filtering. > > > > The problem was, that after some time of stressing the card with > > (re)tuning to a (new) frequency simply no more DMA activities took place. > > Reloading the driver solved the problem, because the Flexcop was > > reinitialized. > > > > I now tried to find out, which part of the initialization fixed it. After > > some testing (+ finding and curing other problems) it turned out, that > > reinitializing register block 0x3xx made it work again. So I simply added > > the reset to the start/stop-data-reception-function. > > > > My affected system is now doing scans for about 6 hours. Without the reset > > it took 1 hour at most to have to no-data situation. > > > > A workaround, because I cannot test the signal-loss-issue > > (losing/regaining signal without restarting data reception), but it > > can be that this issue is solved as well (with the help of the smaller > > changes I made). We have to wait for user comments. > > OK, thanks for the info. > Johannes did you apply the patch to the dvb-kernel cvs? Greetings Halim
