[linux-dvb] Air/SkyStar2 IRQ stop (partial) fix

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi list,

after some time of investigation the no-data problem of the 
flexcop-pci-driver (f.k.a skystar2-driver) is fixed (partially at least).

Short problem description: after some time stressing the card with 
(re)tuning (e.g. as a slave card in VDR doing EPG/channels-scan) the card 
stops to producing interrupts and thus delivers not data anymore.

I could only do tests with an old AirStar card which is not really 
reliable, because most of the affected cards are SkyStar2 DVB-S and I 
don't have easy access to DVB-S.

I highly encourage everyone who suffered/ is suffering from this issue to 
either try current CVS of dvb-kernel (requires 2.6.12) or to checkout CVS 
from 2005-06-18 and apply this patch [1] (runs with 2.6.9/10/11).
(cvs co -D 2005-06-18 dvb-kernel or cvs up -D 2005-06-18)

Please report your results. Thank you and good luck ;).

best regards,
Patrick.

[1] 
http://vaasa.wi-bw.tfh-wildau.de/~pboettch/home/files/fc-irq-check-01.patch

--
   Mail: patrick.boettcher@xxxxxxx
   WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/



[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux