Allan Stirling wrote: > Manu Abraham wrote: > >> >> ca_zap has been checked into the CVS, for the impatient .. For ca_zap to >> work you would require the latest version of the dvb-kernel too as there >> were some more changes/code simplifications that went in .. >> >> It is an initial checkin so don't have too high an expectation.. but >> let's see how it goes.. >> > > Once again, apologies for the direct mail. I'm going to stop doing that. > For the rest of the list: > > Great! I'm trying this, but I'm probably misunderstanding something. > > I have a Dragon CAM acting as a straight CAM for a (legal) NDS > Videoguard card. This works fine in Windows. > NDS works in a slot.. ? Don't know much about NDS, but maybe a few months later who knows.. ? ;-) Ok, Dragon CAM works with Twinhan.. Hmm no problen there .. > "BBC 1 Yorks" is unencrypted, "Sky One" is encrypted with NDS. > > I get nothing out of pvr0 using: > ./ca_zap -a 3 -c /root/channels.conf -n "BBC 1 Yorks" -t sat Since BBC 1 Yorks is unencrypted, no need to use ca_zap .. A regular zap would be sufficient .. > Using Adpater=[/dev/dvb/adapter3] > Frontend=[/dev/dvb/adapter3/frontend0] > Demux=[/dev/dvb/adapter3/demux0] > Slot=[/dev/dvb/adapter3/ca0] > Parsing /root/channels.conf > Satellite frontend > parse_sat_channel_list: Channel=[BBC 1 Yorks], Frequency=[10788], > Satellite=[0], Symbol Rate=[22000], Video=[2324], Audio=[2325], > Service=[10304] > Service ID=[10304] > parse_pat: ----------------->parse PAT section > parse_pat: PAT => Section Length=[41], TS ID=[10600] > parse_si: PAT: Close Demux /dev/dvb/adapter3/demux0 > It doesn't parse pmt ? Have you done a szap before doing a ca_zap ? At present ca_zap does not tune to a frequency, just to maintain simplicity .. > Same with the following: > ./ca_zap -a 3 -c /root/channels.conf -n "Sky One" -t sat > Using Adpater=[/dev/dvb/adapter3] > Frontend=[/dev/dvb/adapter3/frontend0] > Demux=[/dev/dvb/adapter3/demux0] > Slot=[/dev/dvb/adapter3/ca0] > Parsing /root/channels.conf > Satellite frontend > parse_sat_channel_list: Channel=[Sky One], Frequency=[12285], > Satellite=[0], Symbol Rate=[27500], Video=[513], Audio=[641], > Service=[4703] > Service ID=[4703] > parse_pat: ----------------->parse PAT section > parse_pat: PAT => Section Length=[41], TS ID=[10600] > parse_si: PAT: Close Demux /dev/dvb/adapter3/demux0 > Here too it doesn't parse pmt .. > Strace shows that demux0 is being reopened, but no data comes out of it. > > Any ideas where to look? Have you tried doing a szap before doing a ca_zap ? Manu
