Einar Bjarni Halld?rsson wrote: >>>>Einar Bjarni Halld?rsson wrote: >>>>>Hi, >>>>> >>>>>I finally got my hands on a DVB card, and have started what is becoming >>>>>a very interesting proccess of getting it to work. Had to jump through >>>>>a >>>>>couple of hoops to get the dst module to recognize it as a DVB-T and >>>>>not >>>>>a DVB-S (the default KnoppMyth R5A16 install wouldn't budge on this >>>>>issue). Since then I've tried kernels 2.6.10 , 2.6.11.11 and 2.6.12-rc5 >>>>>with the CVS version of dvb-kernel, but with similar results. The card >>>>>get's recognized as a DVB-T and the CI module is recognized, but when I >>>>>try to get dvbscan to do it's thing, I get "tuning failed" and a bunch >>>>>of error messages in dmesg. >>>>> >>>>>I've seen people have similar problems in the mailing list archives, >>>>>but >>>>>I was wondering if there is any progress in finding a solution. >>>>Which card model do you have ? >>>> >>>I have a TwinhanDTV Ter-CI >>You have the Manufacturer and the Card type, but no Card model.. >>The card model starts with VP-XXXXXX >> > > The card is a VP-3040 > The VP-3040 is a bit different kind of card, as per my knowledge it has a detachable add-on CA board, and can have TS188 as well as TS204 too. I need to add some more code to correctly identify this board.. Temporarily you can try force it to use TS188 (DST_TYPE_HAS_NEWTUNE) or TS204 (without the NEWTUNE option) and see how it goes.. Possibility is that probably the Tuner type will be the other case what is exactly for you at the momemt and hence communication errors.. Let me know how this goes .. You will need some more patches, i will post it a while later in the night .. In the meantime you can check out which tuner type works appropriate for you .. (You should not see any i2c communication errors, except in the case of a very weak signal, if you gone through the right steps) Manu
