On 03/12/2017 01:22 PM, Russell King - ARM Linux wrote:
On Sun, Mar 12, 2017 at 01:05:06PM -0700, Steve Longerbeam wrote:
On 03/12/2017 12:57 PM, Russell King - ARM Linux wrote:
On Sat, Mar 11, 2017 at 04:30:53PM -0800, Steve Longerbeam wrote:
If it's too difficult to get the imx219 csi-2 transmitter into the
LP-11 state on power on, perhaps the csi-2 receiver can be a little
more lenient on the transmitter and make the LP-11 timeout a warning
instead of error-out.
Can you try the attached change on top of the version 5 patchset?
If that doesn't work then you're just going to have to fix the bug
in imx219.
That patch gets me past that hurdle, only to reveal that there's another
issue:
Yeah, ipu_cpmem_set_image() failed because it doesn't recognize the
bayer formats. Wait, didn't we fix this already? I've lost track.
Ah, right, we were going to move this support into the IPUv3 driver,
but in the meantime I think you had some patches to get around this.
What I had was this patch for your v3. I never got to testing your
v4 because of the LP-11 problem.
In v5, you've changed to propagate the ipu_cpmem_set_image() error
code to avoid the resulting corruption, but that leaves the other bits
of this patch unaddressed, along my "media: imx: smfc: add support
for bayer formats" patch.
Your driver basically has no support for bayer formats.
You added the patches to this driver that adds the bayer support,
I don't think there is anything more required of the driver at this
point to support bayer, the remaining work needs to happen in the IPUv3
driver.
I'll see if I have time to write that patch to IPUv3, but it's simple,
in fact what you wrote below can be translate directly into
ipu_cpmem_set_image(). There's a few other places bayer needs to be
treated in IPUv3, but it should be obvious by grepping for the
reference to pixel formats.
Steve
diff --git a/drivers/staging/media/imx/imx-smfc.c b/drivers/staging/media/imx/imx-smfc.c
index 313732201a52..4351c0365cf4 100644
--- a/drivers/staging/media/imx/imx-smfc.c
+++ b/drivers/staging/media/imx/imx-smfc.c
@@ -234,11 +234,6 @@ static void imx_smfc_setup_channel(struct imx_smfc_priv *priv)
buf1 = imx_media_dma_buf_get_next_queued(priv->out_ring);
priv->next = buf1;
- image.phys0 = buf0->phys;
- image.phys1 = buf1->phys;
- ipu_cpmem_set_image(priv->smfc_ch, &image);
-
-
switch (image.pix.pixelformat) {
case V4L2_PIX_FMT_SBGGR8:
case V4L2_PIX_FMT_SGBRG8:
@@ -247,6 +242,10 @@ static void imx_smfc_setup_channel(struct imx_smfc_priv *priv)
burst_size = 8;
passthrough = true;
passthrough_bits = 8;
+ ipu_cpmem_set_resolution(priv->smfc_ch, image.rect.width, image.rect.height);
+ ipu_cpmem_set_stride(priv->smfc_ch, image.pix.bytesperline);
+ ipu_cpmem_set_buffer(priv->smfc_ch, 0, buf0->phys);
+ ipu_cpmem_set_buffer(priv->smfc_ch, 1, buf1->phys);
break;
case V4L2_PIX_FMT_SBGGR16:
@@ -256,9 +255,17 @@ static void imx_smfc_setup_channel(struct imx_smfc_priv *priv)
burst_size = 4;
passthrough = true;
passthrough_bits = 16;
+ ipu_cpmem_set_resolution(priv->smfc_ch, image.rect.width, image.rect.height);
+ ipu_cpmem_set_stride(priv->smfc_ch, image.pix.bytesperline);
+ ipu_cpmem_set_buffer(priv->smfc_ch, 0, buf0->phys);
+ ipu_cpmem_set_buffer(priv->smfc_ch, 1, buf1->phys);
break;
default:
+ image.phys0 = buf0->phys;
+ image.phys1 = buf1->phys;
+ ipu_cpmem_set_image(priv->smfc_ch, &image);
+
burst_size = (outfmt->width & 0xf) ? 8 : 16;
/*
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
