In version 5: - ov5640: renamed "pwdn-gpios" to "powerdown-gpios" - ov5640: add mutex lock around the subdev op entry points. - ov5640: don't attempt to program the new mode in ov5640_set_fmt(). Instead set a new flag, pending_mode_change, and program the new mode at s_stream() if flag is set. - ov5640: implement [gs]_frame_interval. As part of that, create ov5640_try_frame_interval(), which is used by both [gs]_frame_interval and [gs]_parm. - ov5640: don't attempt to set controls in ov5640_s_ctrl(), or at mode change, do it instead after first power-up. - video-multiplexer: include link_validate in media_entity_operations. - video-multiplexer: enforce that output pad frame interval must match input pad frame interval in vidsw_s_frame_interval(). - video-multiplexer: initialize frame interval to a default 30 fps. - mipi csi-2: renamed "cfg" clock name property to "ref". This is the 27 MHz mipi csi-2 PLL reference clock. - mipi csi-2: create a hsfreq_map[] table based on https://community.nxp.com/docs/DOC-94312. Use it to select a hsfreqrange_sel value when programming the D-PHY, based on a max Mbps per lane. This is computed from the source subdev via V4L2_CID_LINK_FREQ control, and if the subdev doesn't implement that control, use a default hard-coded max Mbps per lane. - added required ports property description to imx-media binding doc. - removed event V4L2_EVENT_FRAME_TIMEOUT. On a frame timeout, which is always unrecoverable, call vb2_queue_error() instead. - export the remaining custom events to V4L2_EVENT_FRAME_INTERVAL_ERROR and V4L2_EVENT_NEW_FRAME_BEFORE_EOF. - vdic: use V4L2_CID_DEINTERLACING_MODE for motion compensation control instead of a custom control. - add v4l2_subdev_link_validate_frame_interval(). Call this in the link_validate imx-media subdev callbacks and video-multiplexer. - fix subdev event registration: implementation of subscribe_event() and unsubscribe_event() subdev ops were missing. - all calls from the pipeline to the sensor subdev have been removed. Only the CSI subdev still refers to a sensor, and only to retrieve its media bus config, which is necessary to setup the CSI interface. - add mutex locks around the imx-media subdev op entry points. - completed the propagation of all pad format parameters from sink pads to source pads within every imx-media subdev. - implement [gs]_frame_interval in all the imx-media subdevs. - imx-ic-prpencvf: there isn't necessarily a CSI subdev in the pipeline in the future, so make sure this is optional when calling the CSI's FIM. - the source pads that attach to capture device nodes now require the IPU internal pixel codes. The capture device translates these to v4l2 fourcc memory formats. - fix control inheritance to the capture device. When the pipeline was modified, the inherited controls were not being refreshed. v4l2_pipeline_inherit_controls() is now called only in imx-media link_notify() callback when a pipelink link is disabled or modified. imx_media_find_pipeline_video_device() is created to locate the capture device in the pipeline. - fix a possible race when propagating formats to the capture device. The subdevs and capture device use different mutex locks when setting formats. imx_media_capture_device_set_format() is created which acquires the capture device mutex when updating the capture device format. - verify all subdevs were bound in the async completion callback. Philipp Zabel (7): [media] dt-bindings: Add bindings for video-multiplexer device ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections add mux and video interface bridge entity functions platform: add video-multiplexer subdevice driver media: imx: csi: fix crop rectangle changes in set_fmt media: imx: csi: add frame skipping support media: imx: csi: fix crop rectangle reset in sink set_fmt Russell King (4): media: imx: add support for bayer formats media: imx: csi: add support for bayer formats media: imx: mipi-csi2: enable setting and getting of frame rates media: imx: csi/fim: add support for frame intervals Steve Longerbeam (28): [media] dt-bindings: Add bindings for i.MX media driver [media] dt/bindings: Add bindings for OV5640 ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node ARM: dts: imx6qdl: add capture-subsystem device ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors ARM: dts: imx6-sabreauto: create i2cmux for i2c3 ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture ARM: dts: imx6-sabreauto: add the ADV7180 video decoder [media] v4l2: add a frame interval error event [media] v4l2: add a new-frame before end-of-frame event [media] v4l2-mc: add a function to inherit controls from a pipeline [media] v4l: subdev: Add function to validate frame interval [media] add Omnivision OV5640 sensor driver UAPI: Add media UAPI Kbuild file media: Add userspace header file for i.MX media: Add i.MX media core driver media: imx: Add Capture Device Interface media: imx: Add CSI subdev driver media: imx: Add VDIC subdev driver media: imx: Add IC subdev drivers media: imx: Add MIPI CSI-2 Receiver subdev driver ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers media: imx: csi: add __csi_get_fmt media: imx: redo pixel format enumeration and negotiation media: imx: propagate sink pad formats to source pads .../devicetree/bindings/media/i2c/ov5640.txt | 45 + Documentation/devicetree/bindings/media/imx.txt | 74 + .../bindings/media/video-multiplexer.txt | 59 + Documentation/media/uapi/mediactl/media-types.rst | 22 + Documentation/media/uapi/v4l/vidioc-dqevent.rst | 12 + Documentation/media/v4l-drivers/imx.rst | 560 +++++ Documentation/media/videodev2.h.rst.exceptions | 2 + arch/arm/boot/dts/imx6dl-sabrelite.dts | 5 + arch/arm/boot/dts/imx6dl-sabresd.dts | 5 + arch/arm/boot/dts/imx6dl.dtsi | 185 ++ arch/arm/boot/dts/imx6q-sabrelite.dts | 5 + arch/arm/boot/dts/imx6q-sabresd.dts | 5 + arch/arm/boot/dts/imx6q.dtsi | 121 ++ arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 144 +- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 152 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 114 +- arch/arm/boot/dts/imx6qdl.dtsi | 17 +- arch/arm/configs/imx_v6_v7_defconfig | 11 + drivers/media/i2c/Kconfig | 7 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov5640.c | 2231 ++++++++++++++++++++ drivers/media/platform/Kconfig | 8 + drivers/media/platform/Makefile | 2 + drivers/media/platform/video-multiplexer.c | 498 +++++ drivers/media/v4l2-core/v4l2-mc.c | 48 + drivers/media/v4l2-core/v4l2-subdev.c | 50 + drivers/staging/media/Kconfig | 2 + drivers/staging/media/Makefile | 1 + drivers/staging/media/imx/Kconfig | 20 + drivers/staging/media/imx/Makefile | 12 + drivers/staging/media/imx/TODO | 17 + drivers/staging/media/imx/imx-ic-common.c | 113 + drivers/staging/media/imx/imx-ic-prp.c | 497 +++++ drivers/staging/media/imx/imx-ic-prpencvf.c | 1236 +++++++++++ drivers/staging/media/imx/imx-ic.h | 38 + drivers/staging/media/imx/imx-media-capture.c | 694 ++++++ drivers/staging/media/imx/imx-media-csi.c | 1595 ++++++++++++++ drivers/staging/media/imx/imx-media-dev.c | 522 +++++ drivers/staging/media/imx/imx-media-fim.c | 463 ++++ drivers/staging/media/imx/imx-media-internal-sd.c | 349 +++ drivers/staging/media/imx/imx-media-of.c | 267 +++ drivers/staging/media/imx/imx-media-utils.c | 1009 +++++++++ drivers/staging/media/imx/imx-media-vdic.c | 949 +++++++++ drivers/staging/media/imx/imx-media.h | 311 +++ drivers/staging/media/imx/imx6-mipi-csi2.c | 725 +++++++ include/media/imx.h | 15 + include/media/v4l2-mc.h | 25 + include/media/v4l2-subdev.h | 10 + include/uapi/Kbuild | 1 + include/uapi/linux/media.h | 6 + include/uapi/linux/v4l2-controls.h | 4 + include/uapi/linux/videodev2.h | 2 + include/uapi/media/Kbuild | 2 + include/uapi/media/imx.h | 21 + 54 files changed, 13262 insertions(+), 27 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt create mode 100644 Documentation/devicetree/bindings/media/imx.txt create mode 100644 Documentation/devicetree/bindings/media/video-multiplexer.txt create mode 100644 Documentation/media/v4l-drivers/imx.rst create mode 100644 drivers/media/i2c/ov5640.c create mode 100644 drivers/media/platform/video-multiplexer.c create mode 100644 drivers/staging/media/imx/Kconfig create mode 100644 drivers/staging/media/imx/Makefile create mode 100644 drivers/staging/media/imx/TODO create mode 100644 drivers/staging/media/imx/imx-ic-common.c create mode 100644 drivers/staging/media/imx/imx-ic-prp.c create mode 100644 drivers/staging/media/imx/imx-ic-prpencvf.c create mode 100644 drivers/staging/media/imx/imx-ic.h create mode 100644 drivers/staging/media/imx/imx-media-capture.c create mode 100644 drivers/staging/media/imx/imx-media-csi.c create mode 100644 drivers/staging/media/imx/imx-media-dev.c create mode 100644 drivers/staging/media/imx/imx-media-fim.c create mode 100644 drivers/staging/media/imx/imx-media-internal-sd.c create mode 100644 drivers/staging/media/imx/imx-media-of.c create mode 100644 drivers/staging/media/imx/imx-media-utils.c create mode 100644 drivers/staging/media/imx/imx-media-vdic.c create mode 100644 drivers/staging/media/imx/imx-media.h create mode 100644 drivers/staging/media/imx/imx6-mipi-csi2.c create mode 100644 include/media/imx.h create mode 100644 include/uapi/media/Kbuild create mode 100644 include/uapi/media/imx.h -- 2.7.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
