On 03/12/2017 12:57 PM, Russell King - ARM Linux wrote:
On Sat, Mar 11, 2017 at 04:30:53PM -0800, Steve Longerbeam wrote:
If it's too difficult to get the imx219 csi-2 transmitter into the
LP-11 state on power on, perhaps the csi-2 receiver can be a little
more lenient on the transmitter and make the LP-11 timeout a warning
instead of error-out.
Can you try the attached change on top of the version 5 patchset?
If that doesn't work then you're just going to have to fix the bug
in imx219.
That patch gets me past that hurdle, only to reveal that there's another
issue:
Yeah, ipu_cpmem_set_image() failed because it doesn't recognize the
bayer formats. Wait, didn't we fix this already? I've lost track.
Ah, right, we were going to move this support into the IPUv3 driver,
but in the meantime I think you had some patches to get around this.
Steve
imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200
imx219 0-0010: VT: pixclk 139200000Hz line 80742Hz frame 30.0Hz
imx219 0-0010: VT: line period 12385ns
imx219 0-0010: OP: pixclk 38500000Hz, 2 lanes, 308Mbps peak each
imx219 0-0010: OP: 3288 bits/line/lane act=10675ns lp/idle=1710ns
ipu1_csi0: csi_idmac_setup failed: -22
ipu1_csi0: pipeline start failed with -22
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1860 at /home/rmk/git/linux-rmk/drivers/media/v4l2-core/videobuf2-core.c:1340 vb2_start_streaming+0x124/0x1b4 [videobuf2_core]
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
