Now that Bill rewrote the driver "properly", this old thing can be removed.
Cc: Bill Pemberton <wfp5p at virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/Makefile | 1 -
drivers/staging/serqt_usb/Kconfig | 9 -
drivers/staging/serqt_usb/Makefile | 1 -
drivers/staging/serqt_usb/TODO | 8 -
drivers/staging/serqt_usb/serqt_usb.c | 2655 ---------------------------------
5 files changed, 0 insertions(+), 2674 deletions(-)
delete mode 100644 drivers/staging/serqt_usb/Kconfig
delete mode 100644 drivers/staging/serqt_usb/Makefile
delete mode 100644 drivers/staging/serqt_usb/TODO
delete mode 100644 drivers/staging/serqt_usb/serqt_usb.c
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index b0e0c60..6b07f43 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_IDE_PHISON) += phison/
obj-$(CONFIG_PLAN9AUTH) += p9auth/
obj-$(CONFIG_HECI) += heci/
obj-$(CONFIG_LINE6_USB) += line6/
-obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100) += serqt_usb/
obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
obj-$(CONFIG_VT6655) += vt6655/
diff --git a/drivers/staging/serqt_usb/Kconfig b/drivers/staging/serqt_usb/Kconfig
deleted file mode 100644
index cc1af5d..0000000
--- a/drivers/staging/serqt_usb/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-config USB_SERIAL_QUATECH_ESU100
- tristate "USB Quatech ESU-100 8 Port Serial Driver"
- depends on USB_SERIAL
- help
- Say Y here if you want to use the Quatech ESU-100 8 port usb to
- serial adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called serqt_usb.
diff --git a/drivers/staging/serqt_usb/Makefile b/drivers/staging/serqt_usb/Makefile
deleted file mode 100644
index 4fd1da2..0000000
--- a/drivers/staging/serqt_usb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100) += serqt_usb.o
diff --git a/drivers/staging/serqt_usb/TODO b/drivers/staging/serqt_usb/TODO
deleted file mode 100644
index 34ecca8..0000000
--- a/drivers/staging/serqt_usb/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-Things to do for this driver to get merged into the main portion of the
-kernel:
- - checkpatch cleanups
- - sparse clean
- - port to the usb-serial layer instead of doing it all on its
- own.
-
-Send patches to Greg Kroah-Hartman <greg at kroah.com>
diff --git a/drivers/staging/serqt_usb/serqt_usb.c b/drivers/staging/serqt_usb/serqt_usb.c
deleted file mode 100644
index 27f78bd..0000000
--- a/drivers/staging/serqt_usb/serqt_usb.c
+++ /dev/null
@@ -1,2655 +0,0 @@
-/*
- * This code was developed for the Quatech USB line for linux, it used
- * much of the code developed by Greg Kroah-Hartman for USB serial devices
- *
- */
-
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/wait.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-
-/* Use our own dbg macro */
-/* #define DEBUG_ON */
-/* #undef dbg */
-#ifdef DEBUG_ON
-#define mydbg(const...) printk(const)
-#else
-#define mydbg(const...)
-#endif
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-#define SERIAL_TTY_MAJOR 0 /* Nice legal number now */
-#define SERIAL_TTY_MINORS 255 /* loads of devices :) */
-#define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */
-#define PREFUFF_LEVEL_CONSERVATIVE 128
-#define ATC_DISABLED 0x00
-
-#define RR_BITS 0x03 /* for clearing clock bits */
-#define DUPMODE_BITS 0xc0
-
-#define RS232_MODE 0x00
-#define RTSCTS_TO_CONNECTOR 0x40
-#define CLKS_X4 0x02
-
-#define LOOPMODE_BITS 0x41 /* LOOP1 = b6, LOOP0 = b0 (PORT B) */
-#define ALL_LOOPBACK 0x01
-#define MODEM_CTRL 0x40
-
-#define THISCHAR data[i]
-#define NEXTCHAR data[i + 1]
-#define THIRDCHAR data[i + 2]
-#define FOURTHCHAR data[i + 3]
-
-/*
- * Useful defintions for port A, Port B and Port C
- */
-#define FULLPWRBIT 0x00000080
-#define NEXT_BOARD_POWER_BIT 0x00000004
-
-#define SERIAL_LSR_OE 0x02
-#define SERIAL_LSR_PE 0x04
-#define SERIAL_LSR_FE 0x08
-#define SERIAL_LSR_BI 0x10
-
-#define SERIAL_LSR_TEMT 0x40
-
-#define DIV_LATCH_LS 0x00
-#define XMT_HOLD_REGISTER 0x00
-#define XVR_BUFFER_REGISTER 0x00
-#define DIV_LATCH_MS 0x01
-#define FIFO_CONTROL_REGISTER 0x02
-#define LINE_CONTROL_REGISTER 0x03
-#define MODEM_CONTROL_REGISTER 0x04
-#define LINE_STATUS_REGISTER 0x05
-#define MODEM_STATUS_REGISTER 0x06
-
-#define SERIAL_MCR_DTR 0x01
-#define SERIAL_MCR_RTS 0x02
-#define SERIAL_MCR_LOOP 0x10
-
-#define SERIAL_MSR_CTS 0x10
-#define SERIAL_MSR_CD 0x80
-#define SERIAL_MSR_RI 0x40
-#define SERIAL_MSR_DSR 0x20
-#define SERIAL_MSR_MASK 0xf0
-
-#define SERIAL_8_DATA 0x03
-#define SERIAL_7_DATA 0x02
-#define SERIAL_6_DATA 0x01
-#define SERIAL_5_DATA 0x00
-
-#define SERIAL_ODD_PARITY 0X08
-#define SERIAL_EVEN_PARITY 0X18
-#define SERIAL_TWO_STOPB 0x04
-#define SERIAL_ONE_STOPB 0x00
-
-#define MAX_BAUD_RATE 460800
-#define MAX_BAUD_REMAINDER 4608
-
-#define QT_SET_GET_DEVICE 0xc2
-#define QT_OPEN_CLOSE_CHANNEL 0xca
-#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
-#define QT_SET_ATF 0xcd
-#define QT_GET_SET_REGISTER 0xc0
-#define QT_GET_SET_UART 0xc1
-#define QT_HW_FLOW_CONTROL_MASK 0xc5
-#define QT_SW_FLOW_CONTROL_MASK 0xc6
-#define QT_SW_FLOW_CONTROL_DISABLE 0xc7
-#define QT_BREAK_CONTROL 0xc8
-
-#define SERIALQT_PCI_IOC_MAGIC 'k'
-#define SERIALQT_WRITE_QOPR _IOW(SERIALQT_PCI_IOC_MAGIC, 0, int)
-#define SERIALQT_WRITE_QMCR _IOW(SERIALQT_PCI_IOC_MAGIC, 1, int)
-#define SERIALQT_GET_NUMOF_UNITS _IOR(SERIALQT_PCI_IOC_MAGIC, 2, void *)
-#define SERIALQT_GET_THIS_UNIT _IOR(SERIALQT_PCI_IOC_MAGIC, 3, void *)
-#define SERIALQT_READ_QOPR _IOR(SERIALQT_PCI_IOC_MAGIC, 4, int)
-#define SERIALQT_READ_QMCR _IOR(SERIALQT_PCI_IOC_MAGIC, 5, int)
-#define SERIALQT_IS422_EXTENDED _IOR(SERIALQT_PCI_IOC_MAGIC, 6, int) /* returns successful if 422 extended */
-
-#define USBD_TRANSFER_DIRECTION_IN 0xc0
-#define USBD_TRANSFER_DIRECTION_OUT 0x40
-
-#define ATC_DISABLED 0x00
-#define ATC_RTS_ENABLED 0x02
-#define ATC_DTR_ENABLED 0x01
-
-#define RR_BITS 0x03 /* for clearing clock bits */
-#define DUPMODE_BITS 0xc0
-
-#define FULL_DUPLEX 0x00
-#define HALF_DUPLEX_RTS 0x40
-#define HALF_DUPLEX_DTR 0x80
-
-#define QMCR_FULL_DUPLEX 0x00
-#define QMCR_HALF_DUPLEX_RTS 0x02
-#define QMCR_HALF_DUPLEX_DTR 0x01
-#define QMCR_HALF_DUPLEX_MASK 0x03
-#define QMCR_CONNECTOR_MASK 0x1C
-
-#define QMCR_RX_EN_MASK 0x20
-
-#define QMCR_ALL_LOOPBACK 0x10
-#define QMCR_MODEM_CONTROL 0X00
-
-#define SERIALQT_IOC_MAXNR 6
-
-struct usb_serial_port {
- struct usb_serial *serial; /* pointer back to the owner of this port */
- struct tty_struct *tty; /* the coresponding tty for this port */
- unsigned char number;
- char active; /* someone has this device open */
-
- unsigned char *interrupt_in_buffer;
- struct urb *interrupt_in_urb;
- __u8 interrupt_in_endpointAddress;
-
- unsigned char *bulk_in_buffer;
- unsigned char *xfer_to_tty_buffer;
- struct urb *read_urb;
- __u8 bulk_in_endpointAddress;
-
- unsigned char *bulk_out_buffer;
- int bulk_out_size;
- struct urb *write_urb;
- __u8 bulk_out_endpointAddress;
-
- wait_queue_head_t write_wait;
- wait_queue_head_t wait;
- struct work_struct work;
-
- int open_count; /* number of times this port has been opened */
- struct semaphore sem; /* locks this structure */
-
- __u8 shadowLCR; /* last LCR value received */
- __u8 shadowMCR; /* last MCR value received */
- __u8 shadowMSR; /* last MSR value received */
- __u8 shadowLSR; /* last LSR value received */
- int RxHolding;
- char closePending;
- int ReadBulkStopped;
-
- void *private; /* data private to the specific port */
-};
-
-struct identity {
- int index;
- int n_identity;
-};
-
-struct usb_serial {
- struct usb_device *dev;
- struct usb_interface *interface; /* the interface for this device */
- struct tty_driver *tty_driver; /* the tty_driver for this device */
- unsigned char minor; /* the starting minor number for this device */
- unsigned char num_ports; /* the number of ports this device has */
- char num_interrupt_in; /* number of interrupt in endpoints we have */
- char num_bulk_in; /* number of bulk in endpoints we have */
- char num_bulk_out; /* number of bulk out endpoints we have */
- unsigned char num_OpenCount; /* the number of ports this device has */
-
- __u16 vendor; /* vendor id of this device */
- __u16 product; /* product id of this device */
- struct usb_serial_port port[MAX_NUM_PORTS];
-
- void *private; /* data private to the specific driver */
-};
-
-static inline int port_paranoia_check(struct usb_serial_port *port,
- const char *function)
-{
- if (!port) {
- dbg("%s - port == NULL", function);
- return -1;
- }
- if (!port->serial) {
- dbg("%s - port->serial == NULL\n", function);
- return -1;
- }
- if (!port->tty) {
- dbg("%s - port->tty == NULL\n", function);
- return -1;
- }
-
- return 0;
-}
-
-/* Inline functions to check the sanity of a pointer that is passed to us */
-static inline int serial_paranoia_check(struct usb_serial *serial,
- const char *function)
-{
- if (!serial) {
- dbg("%s - serial == NULL\n", function);
- return -1;
- }
-
- return 0;
-}
-
-static inline struct usb_serial *get_usb_serial(struct usb_serial_port *port,
- const char *function)
-{
- /* if no port was specified, or it fails a paranoia check */
- if (!port ||
- port_paranoia_check(port, function) ||
- serial_paranoia_check(port->serial, function)) {
- /* then say that we dont have a valid usb_serial thing, which will
- * end up genrating -ENODEV return values */
- return NULL;
- }
-
- return port->serial;
-}
-
-struct qt_get_device_data {
- __u8 porta;
- __u8 portb;
- __u8 portc;
-};
-
-struct qt_open_channel_data {
- __u8 line_status;
- __u8 modem_status;
-};
-
-static void ProcessLineStatus(struct usb_serial_port *port,
- unsigned char line_status);
-static void ProcessModemStatus(struct usb_serial_port *port,
- unsigned char modem_status);
-static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data);
-static struct usb_serial *get_free_serial(int num_ports, int *minor);
-
-static int serqt_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-
-static void serqt_usb_disconnect(struct usb_interface *interface);
-static int box_set_device(struct usb_serial *serial,
- struct qt_get_device_data *pDeviceData);
-static int box_get_device(struct usb_serial *serial,
- struct qt_get_device_data *pDeviceData);
-static int serial_open(struct tty_struct *tty, struct file *filp);
-static void serial_close(struct tty_struct *tty, struct file *filp);
-static int serial_write_room(struct tty_struct *tty);
-static int serial_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg);
-static void serial_set_termios(struct tty_struct *tty, struct ktermios *old);
-static int serial_write(struct tty_struct *tty, const unsigned char *buf,
- int count);
-
-static void serial_throttle(struct tty_struct *tty);
-static void serial_unthrottle(struct tty_struct *tty);
-static int serial_break(struct tty_struct *tty, int break_state);
-static int serial_chars_in_buffer(struct tty_struct *tty);
-
-static int qt_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
-static int BoxSetPrebufferLevel(struct usb_serial *serial);
-
-static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode);
-static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
- unsigned short default_divisor,
- unsigned char default_LCR);
-
-static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number,
- __u16 OpenClose,
- struct qt_open_channel_data *pDeviceData);
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
-static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
- unsigned short Register_Num, __u8 *pValue);
-static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
- unsigned short Register_Num, unsigned short Value);
-static void qt_write_bulk_callback(struct urb *urb);
-static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf, int count);
-static void port_softint(struct work_struct *work);
-static int qt_write_room(struct usb_serial_port *port);
-static int qt_chars_in_buffer(struct usb_serial_port *port);
-static int qt_ioctl(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file, unsigned int cmd, unsigned long arg);
-static void qt_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios);
-static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
- int bSet);
-static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index);
-static int EmulateWriteQMCR_Reg(int index, unsigned uc_value);
-static int EmulateReadQMCR_Reg(int index, unsigned *uc_value);
-static struct usb_serial *find_the_box(unsigned int index);
-static int ioctl_serial_usb(struct inode *innod, struct file *filp, unsigned int cmd,
- unsigned long arg);
-
-static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 Uart,
- unsigned char stop_char, unsigned char start_char);
-static void qt_read_bulk_callback(struct urb *urb);
-
-static void port_sofrint(void *private);
-
-static void return_serial(struct usb_serial *serial);
-
-static int serial_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
-static int serial_tiocmget(struct tty_struct *tty, struct file *file);
-
-static int qt_tiocmset(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file, unsigned int value);
-
-static int qt_tiocmget(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file);
-
-/* Version Information */
-#define DRIVER_VERSION "v2.14"
-#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
-#define DRIVER_DESC "Quatech USB to Serial Driver"
-
-#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */
-#define DEVICE_ID_QUATECH_RS232_SINGLE_PORT 0xC020 /* SSU100 */
-#define DEVICE_ID_QUATECH_RS422_SINGLE_PORT 0xC030 /* SSU200 */
-#define DEVICE_ID_QUATECH_RS232_DUAL_PORT 0xC040 /* DSU100 */
-#define DEVICE_ID_QUATECH_RS422_DUAL_PORT 0xC050 /* DSU200 */
-#define DEVICE_ID_QUATECH_RS232_FOUR_PORT 0xC060 /* QSU100 */
-#define DEVICE_ID_QUATECH_RS422_FOUR_PORT 0xC070 /* QSU200 */
-#define DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A 0xC080 /* ESU100A */
-#define DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B 0xC081 /* ESU100B */
-#define DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A 0xC0A0 /* ESU200A */
-#define DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B 0xC0A1 /* ESU200B */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_A 0xC090 /* HSU100A */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_B 0xC091 /* HSU100B */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_C 0xC092 /* HSU100C */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_D 0xC093 /* HSU100D */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_A 0xC0B0 /* HSU200A */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_B 0xC0B1 /* HSU200B */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_C 0xC0B2 /* HSU200C */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_D 0xC0B3 /* HSU200D */
-
-/* table of Quatech devices */
-static struct usb_device_id serqt_table[] = {
- {USB_DEVICE
- (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_SINGLE_PORT)},
- {USB_DEVICE
- (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_SINGLE_PORT)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_DUAL_PORT)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_DUAL_PORT)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_FOUR_PORT)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_FOUR_PORT)},
- {USB_DEVICE
- (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A)},
- {USB_DEVICE
- (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B)},
- {USB_DEVICE
- (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A)},
- {USB_DEVICE
- (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_A)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_B)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_C)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_D)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_A)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_B)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_C)},
- {USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_D)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, serqt_table);
-
-static int major_number;
-static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
-
-/* table of Quatech 422devices */
-static unsigned int serqt_422_table[] = {
- DEVICE_ID_QUATECH_RS422_SINGLE_PORT,
- DEVICE_ID_QUATECH_RS422_DUAL_PORT,
- DEVICE_ID_QUATECH_RS422_FOUR_PORT,
- DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A,
- DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B,
- DEVICE_ID_QUATECH_RS422_16_PORT_A,
- DEVICE_ID_QUATECH_RS422_16_PORT_B,
- DEVICE_ID_QUATECH_RS422_16_PORT_C,
- DEVICE_ID_QUATECH_RS422_16_PORT_D,
- 0 /* terminate with zero */
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver serqt_usb_driver = {
- .name = "quatech-usb-serial",
- .probe = serqt_probe,
- .disconnect = serqt_usb_disconnect,
- .id_table = serqt_table,
-};
-
-static struct ktermios *serial_termios[SERIAL_TTY_MINORS];
-static struct ktermios *serial_termios_locked[SERIAL_TTY_MINORS];
-
-static const struct tty_operations serial_ops = {
- .open = serial_open,
- .close = serial_close,
- .write = serial_write,
- .write_room = serial_write_room,
- .ioctl = serial_ioctl,
- .set_termios = serial_set_termios,
- .throttle = serial_throttle,
- .unthrottle = serial_unthrottle,
- .break_ctl = serial_break,
- .chars_in_buffer = serial_chars_in_buffer,
- .tiocmset = serial_tiocmset,
- .tiocmget = serial_tiocmget,
-};
-
-static struct tty_driver serial_tty_driver = {
- .magic = TTY_DRIVER_MAGIC,
- .driver_name = "Quatech usb-serial",
- .name = "ttyQT_USB",
- .major = SERIAL_TTY_MAJOR,
- .minor_start = 0,
- .num = SERIAL_TTY_MINORS,
- .type = TTY_DRIVER_TYPE_SERIAL,
- .subtype = SERIAL_TYPE_NORMAL,
- .flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV,
-
- .termios = serial_termios,
- .termios_locked = serial_termios_locked,
- .init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL,
-
- .init_termios.c_iflag = ICRNL | IXON,
- .init_termios.c_oflag = OPOST,
-
- .init_termios.c_lflag =
- ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHOCTL | ECHOKE | IEXTEN,
-};
-
-/* fops for parent device */
-static const struct file_operations serialqt_usb_fops = {
- .ioctl = ioctl_serial_usb,
-};
-
- /**
- * serqt_probe
- *
- * Called by the usb core when a new device is connected that it thinks
- * this driver might be interested in.
- *
- */
-static int serqt_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(interface);
- struct usb_serial *serial = NULL;
- struct usb_serial_port *port;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
- struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
- struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
- int minor;
- int buffer_size;
- int i;
- struct usb_host_interface *iface_desc;
- int num_interrupt_in = 0;
- int num_bulk_in = 0;
- int num_bulk_out = 0;
- int num_ports;
- struct qt_get_device_data DeviceData;
- int status;
-
- mydbg("In %s\n", __func__);
-
- /* let's find the endpoints needed */
- /* check out the endpoints */
- iface_desc = interface->cur_altsetting;;
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found a bulk in endpoint */
- mydbg("found bulk in");
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
- }
-
- if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found a bulk out endpoint */
- mydbg("found bulk out\n");
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
- }
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x03)) {
- /* we found a interrupt in endpoint */
- mydbg("found interrupt in\n");
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
- }
- }
-
- /* found all that we need */
- dev_info(&interface->dev, "Quatech converter detected\n");
- num_ports = num_bulk_out;
- if (num_ports == 0) {
- err("Quatech device with no bulk out, not allowed.");
- return -ENODEV;
-
- }
-
- serial = get_free_serial(num_ports, &minor);
- if (serial == NULL) {
- err("No more free serial devices");
- return -ENODEV;
- }
-
- serial->dev = dev;
- serial->interface = interface;
- serial->minor = minor;
- serial->num_ports = num_ports;
- serial->num_bulk_in = num_bulk_in;
- serial->num_bulk_out = num_bulk_out;
- serial->num_interrupt_in = num_interrupt_in;
- serial->vendor = dev->descriptor.idVendor;
- serial->product = dev->descriptor.idProduct;
-
- /* set up the endpoint information */
- for (i = 0; i < num_bulk_in; ++i) {
- endpoint = bulk_in_endpoint[i];
- port = &serial->port[i];
- port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->read_urb) {
- err("No free urbs available");
- goto probe_error;
- }
- buffer_size = endpoint->wMaxPacketSize;
- port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
- port->xfer_to_tty_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_in_buffer) {
- err("Couldn't allocate bulk_in_buffer");
- goto probe_error;
- }
- usb_fill_bulk_urb(port->read_urb, dev,
- usb_rcvbulkpipe(dev,
- endpoint->bEndpointAddress),
- port->bulk_in_buffer, buffer_size,
- qt_read_bulk_callback, port);
- }
-
- for (i = 0; i < num_bulk_out; ++i) {
- endpoint = bulk_out_endpoint[i];
- port = &serial->port[i];
- port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->write_urb) {
- err("No free urbs available");
- goto probe_error;
- }
- buffer_size = endpoint->wMaxPacketSize;
- port->bulk_out_size = buffer_size;
- port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_out_buffer) {
- err("Couldn't allocate bulk_out_buffer");
- goto probe_error;
- }
- usb_fill_bulk_urb(port->write_urb, dev,
- usb_sndbulkpipe(dev,
- endpoint->bEndpointAddress),
- port->bulk_out_buffer, buffer_size,
- qt_write_bulk_callback, port);
-
- }
-
- /* For us numb of bulkin or out = number of ports */
- mydbg("%s - setting up %d port structures for this device\n",
- __func__, num_bulk_in);
- for (i = 0; i < num_bulk_in; ++i) {
- port = &serial->port[i];
- port->number = i + serial->minor;
- port->serial = serial;
-
- INIT_WORK(&port->work, port_softint);
-
- init_MUTEX(&port->sem);
-
- }
- status = box_get_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_get_device failed");
- goto probe_error;
- }
-
- mydbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
-
- DeviceData.portb &= ~FULLPWRBIT;
- mydbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
-
- status = box_set_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_set_device failed\n");
- goto probe_error;
- }
-
- /* initialize the devfs nodes for this device and let the user know what ports we are bound to */
- for (i = 0; i < serial->num_ports; ++i) {
- dev_info(&interface->dev,
- "Converter now attached to ttyUSB%d (or usb/tts/%d for devfs)",
- serial->port[i].number, serial->port[i].number);
- }
-
- /* usb_serial_console_init (debug, minor); */
-
- /***********TAG add start next board here ****/
- status = box_get_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_get_device failed");
- goto probe_error;
- }
- /*
- * and before we power up lets initialiaze parnent device stuff here before
- * we set thmem via any other method such as the property pages
- */
- switch (serial->product) {
- case DEVICE_ID_QUATECH_RS232_SINGLE_PORT:
- case DEVICE_ID_QUATECH_RS232_DUAL_PORT:
- case DEVICE_ID_QUATECH_RS232_FOUR_PORT:
- case DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A:
- case DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B:
- case DEVICE_ID_QUATECH_RS232_16_PORT_A:
- case DEVICE_ID_QUATECH_RS232_16_PORT_B:
- case DEVICE_ID_QUATECH_RS232_16_PORT_C:
- case DEVICE_ID_QUATECH_RS232_16_PORT_D:
- DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
- DeviceData.porta |= CLKS_X4;
- DeviceData.portb &= ~(LOOPMODE_BITS);
- DeviceData.portb |= RS232_MODE;
- break;
-
- case DEVICE_ID_QUATECH_RS422_SINGLE_PORT:
- case DEVICE_ID_QUATECH_RS422_DUAL_PORT:
- case DEVICE_ID_QUATECH_RS422_FOUR_PORT:
- case DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A:
- case DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B:
- case DEVICE_ID_QUATECH_RS422_16_PORT_A:
- case DEVICE_ID_QUATECH_RS422_16_PORT_B:
- case DEVICE_ID_QUATECH_RS422_16_PORT_C:
- case DEVICE_ID_QUATECH_RS422_16_PORT_D:
- DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
- DeviceData.porta |= CLKS_X4;
- DeviceData.portb &= ~(LOOPMODE_BITS);
- DeviceData.portb |= ALL_LOOPBACK;
- break;
- default:
- DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
- DeviceData.porta |= CLKS_X4;
- DeviceData.portb &= ~(LOOPMODE_BITS);
- DeviceData.portb |= RS232_MODE;
- break;
-
- }
- status = BoxSetPrebufferLevel(serial); /* sets to default vaue */
- if (status < 0) {
- mydbg(__FILE__ "BoxSetPrebufferLevel failed\n");
- goto probe_error;
- }
-
- status = BoxSetATC(serial, ATC_DISABLED);
- if (status < 0) {
- mydbg(__FILE__ "BoxSetATC failed\n");
- goto probe_error;
- }
- /**********************************************************/
- mydbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
-
- DeviceData.portb |= NEXT_BOARD_POWER_BIT;
- mydbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
-
- status = box_set_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_set_device failed\n");
- goto probe_error;
- }
-
- mydbg("Exit Success %s\n", __func__);
-
- usb_set_intfdata(interface, serial);
- return 0;
-
-probe_error:
-
- for (i = 0; i < num_bulk_in; ++i) {
- port = &serial->port[i];
- usb_free_urb(port->read_urb);
- kfree(port->bulk_in_buffer);
- }
- for (i = 0; i < num_bulk_out; ++i) {
- port = &serial->port[i];
- usb_free_urb(port->write_urb);
- kfree(port->bulk_out_buffer);
- kfree(port->xfer_to_tty_buffer);
- }
- for (i = 0; i < num_interrupt_in; ++i) {
- port = &serial->port[i];
- usb_free_urb(port->interrupt_in_urb);
- kfree(port->interrupt_in_buffer);
- }
-
- /* return the minor range that this device had */
- return_serial(serial);
- mydbg("Exit fail %s\n", __func__);
-
- /* free up any memory that we allocated */
- kfree(serial);
- return -EIO;
-}
-
-/*
- * returns the serial_table array pointers that are taken
- * up in consecutive positions for each port to a common usb_serial structure
- * back to NULL
- */
-static void return_serial(struct usb_serial *serial)
-{
- int i;
-
- mydbg("%s\n", __func__);
-
- if (serial == NULL)
- return;
-
- for (i = 0; i < serial->num_ports; ++i)
- serial_table[serial->minor + i] = NULL;
-
- return;
-}
-
-/*
- * Finds the first locatio int the serial_table array where it can fit
- * num_ports number of consecutive points to a common usb_serial
- * structure,allocates a stucture points to it in all the structures, and
- * returns the index to the first location in the array in the "minor"
- * variable.
- */
-static struct usb_serial *get_free_serial(int num_ports, int *minor)
-{
- struct usb_serial *serial = NULL;
- int i, j;
- int good_spot;
-
- mydbg("%s %d\n", __func__, num_ports);
-
- *minor = 0;
- for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
- if (serial_table[i])
- continue;
-
- good_spot = 1;
- /*
- * find a spot in the array where you can fit consecutive
- * positions to put the pointers to the usb_serail allocated
- * structure for all the minor numbers (ie. ports)
- */
- for (j = 1; j <= num_ports - 1; ++j)
- if (serial_table[i + j])
- good_spot = 0;
- if (good_spot == 0)
- continue;
-
- serial = kmalloc(sizeof(struct usb_serial), GFP_KERNEL);
- if (!serial) {
- err("%s - Out of memory", __func__);
- return NULL;
- }
- memset(serial, 0, sizeof(struct usb_serial));
- serial_table[i] = serial;
- *minor = i;
- mydbg("%s - minor base = %d\n", __func__, *minor);
-
- /*
- * copy in the pointer into the array starting a the *minor
- * position minor is the index into the array.
- */
- for (i = *minor + 1;
- (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
- serial_table[i] = serial;
- return serial;
- }
- return NULL;
-}
-
-static int flip_that(struct tty_struct *tty, __u16 index,
- struct usb_serial *serial)
-{
- tty_flip_buffer_push(tty);
- tty_schedule_flip(tty);
- return 0;
-}
-
-/* Handles processing and moving data to the tty layer */
-static void port_sofrint(void *private)
-{
- struct usb_serial_port *port = private;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- struct tty_struct *tty = port->tty;
- unsigned char *data = port->read_urb->transfer_buffer;
- unsigned int index;
- struct urb *urb = port->read_urb;
- unsigned int RxCount = urb->actual_length;
- int i, result;
- int flag, flag_data;
-
- /* index = MINOR(port->tty->device) - serial->minor; */
- index = tty->index - serial->minor;
-
- mydbg("%s - port %d\n", __func__, port->number);
- mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
- if (port_paranoia_check(port, __func__) != 0) {
- mydbg("%s - port_paranoia_check, exiting\n", __func__);
- port->ReadBulkStopped = 1;
- return;
- }
-
- if (!serial) {
- mydbg("%s - bad serial pointer, exiting\n", __func__);
- return;
- }
- if (port->closePending == 1) {
- /* Were closing , stop reading */
- mydbg("%s - (port->closepending == 1\n", __func__);
- port->ReadBulkStopped = 1;
- return;
- }
-
- /*
- * RxHolding is asserted by throttle, if we assert it, we're not
- * receiving any more characters and let the box handle the flow
- * control
- */
- if (port->RxHolding == 1) {
- port->ReadBulkStopped = 1;
- return;
- }
-
- if (urb->status) {
- port->ReadBulkStopped = 1;
-
- mydbg("%s - nonzero read bulk status received: %d\n",
- __func__, urb->status);
- return;
- }
-
- tty = port->tty;
- mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
- if (tty && RxCount) {
- flag_data = 0;
- for (i = 0; i < RxCount; ++i) {
- /* Look ahead code here */
- if ((i <= (RxCount - 3)) && (THISCHAR == 0x1b)
- && (NEXTCHAR == 0x1b)) {
- flag = 0;
- switch (THIRDCHAR) {
- case 0x00:
- /* Line status change 4th byte must follow */
- if (i > (RxCount - 4)) {
- mydbg("Illegal escape sequences in received data\n");
- break;
- }
- ProcessLineStatus(port, FOURTHCHAR);
- i += 3;
- flag = 1;
- break;
-
- case 0x01:
- /* Modem status status change 4th byte must follow */
- mydbg("Modem status status. \n");
- if (i > (RxCount - 4)) {
- mydbg
- ("Illegal escape sequences in received data\n");
- break;
- }
- ProcessModemStatus(port, FOURTHCHAR);
- i += 3;
- flag = 1;
- break;
- case 0xff:
- mydbg("No status sequence. \n");
-
- ProcessRxChar(port, THISCHAR);
- ProcessRxChar(port, NEXTCHAR);
- i += 2;
- break;
- }
- if (flag == 1)
- continue;
- }
-
- if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, 1);
- tty_insert_flip_string(tty, (data + i), 1);
- }
-
- }
- tty_flip_buffer_push(tty);
- }
-
- /* Continue trying to always read */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- qt_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- mydbg("%s - failed resubmitting read urb, error %d",
- __func__, result);
- else {
- if (tty && RxCount)
- flip_that(tty, index, serial);
- }
-
- return;
-
-}
-
-static void qt_read_bulk_callback(struct urb *urb)
-{
-
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-
- if (urb->status) {
- port->ReadBulkStopped = 1;
- mydbg("%s - nonzero write bulk status received: %d\n",
- __func__, urb->status);
- return;
- }
-
- port_sofrint((void *)port);
- schedule_work(&port->work);
-}
-
-static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data)
-{
- struct tty_struct *tty;
- struct urb *urb = port->read_urb;
- tty = port->tty;
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-
- if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, 1);
- tty_insert_flip_string(tty, &Data, 1);
- /* tty_flip_buffer_push(tty); */
- }
-
- return;
-}
-
-static void ProcessLineStatus(struct usb_serial_port *port,
- unsigned char line_status)
-{
-
- port->shadowLSR =
- line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
- SERIAL_LSR_BI);
- return;
-}
-
-static void ProcessModemStatus(struct usb_serial_port *port,
- unsigned char modem_status)
-{
-
- port->shadowMSR = modem_status;
- wake_up_interruptible(&port->wait);
- return;
-}
-
-static void serqt_usb_disconnect(struct usb_interface *interface)
-{
- struct usb_serial *serial = usb_get_intfdata(interface);
- /* struct device *dev = &interface->dev; */
- struct usb_serial_port *port;
- int i;
-
- mydbg("%s\n", __func__);
- if (serial) {
-
- serial->dev = NULL;
-
- for (i = 0; i < serial->num_ports; ++i)
- serial->port[i].open_count = 0;
-
- for (i = 0; i < serial->num_bulk_in; ++i) {
- port = &serial->port[i];
- usb_unlink_urb(port->read_urb);
- usb_free_urb(port->read_urb);
- kfree(port->bulk_in_buffer);
- }
- for (i = 0; i < serial->num_bulk_out; ++i) {
- port = &serial->port[i];
- usb_unlink_urb(port->write_urb);
- usb_free_urb(port->write_urb);
- kfree(port->bulk_out_buffer);
- }
- for (i = 0; i < serial->num_interrupt_in; ++i) {
- port = &serial->port[i];
- usb_unlink_urb(port->interrupt_in_urb);
- usb_free_urb(port->interrupt_in_urb);
- kfree(port->interrupt_in_buffer);
- }
-
- /* return the minor range that this device had */
- return_serial(serial);
-
- /* free up any memory that we allocated */
- kfree(serial);
-
- } else {
- dev_info(&interface->dev, "device disconnected");
- }
-
-}
-
-static struct usb_serial *get_serial_by_minor(unsigned int minor)
-{
- return serial_table[minor];
-}
-
-/*****************************************************************************
- * Driver tty interface functions
- *****************************************************************************/
-static int serial_open(struct tty_struct *tty, struct file *filp)
-{
- struct usb_serial *serial;
- struct usb_serial_port *port;
- unsigned int portNumber;
- int retval = 0;
-
- mydbg("%s\n", __func__);
-
- /* initialize the pointer incase something fails */
- tty->driver_data = NULL;
-
- /* get the serial object associated with this tty pointer */
- /* serial = get_serial_by_minor (MINOR(tty->device)); */
-
- /* get the serial object associated with this tty pointer */
- serial = get_serial_by_minor(tty->index);
-
- if (serial_paranoia_check(serial, __func__))
- return -ENODEV;
-
- /* set up our port structure making the tty driver remember our port object, and us it */
- portNumber = tty->index - serial->minor;
- port = &serial->port[portNumber];
- tty->driver_data = port;
-
- down(&port->sem);
- port->tty = tty;
-
- ++port->open_count;
- if (port->open_count == 1) {
- port->closePending = 0;
- mydbg("%s port->closepending = 0\n", __func__);
-
- port->RxHolding = 0;
- mydbg("%s port->RxHolding = 0\n", __func__);
-
- retval = qt_open(tty, port, filp);
- }
-
- if (retval)
- port->open_count = 0;
- mydbg("%s returning port->closePending = %d\n", __func__,
- port->closePending);
-
- up(&port->sem);
- return retval;
-}
-
-/*****************************************************************************
- *device's specific driver functions
- *****************************************************************************/
-static int qt_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
-{
- struct usb_serial *serial = port->serial;
- int result = 0;
- unsigned int index;
- struct qt_get_device_data DeviceData;
- struct qt_open_channel_data ChannelData;
- unsigned short default_divisor = 0x30; /* gives 9600 baud rate */
- unsigned char default_LCR = SERIAL_8_DATA; /* 8, none , 1 */
- int status = 0;
-
- if (port_paranoia_check(port, __func__))
- return -ENODEV;
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- index = tty->index - serial->minor;
-
- status = box_get_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_get_device failed\n");
- return status;
- }
- serial->num_OpenCount++;
- mydbg("%s serial->num_OpenCount = %d\n", __func__,
- serial->num_OpenCount);
- /* Open uart channel */
-
- /* Port specific setups */
- status = BoxOPenCloseChannel(serial, index, 1, &ChannelData);
- if (status < 0) {
- mydbg(__FILE__ "BoxOPenCloseChannel failed\n");
- return status;
- }
- mydbg(__FILE__ "BoxOPenCloseChannel completed.\n");
-
- port->shadowLSR = ChannelData.line_status &
- (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI);
-
- port->shadowMSR = ChannelData.modem_status &
- (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
-
- /* Set Baud rate to default and turn off (default)flow control here */
- status = BoxSetUart(serial, index, default_divisor, default_LCR);
- if (status < 0) {
- mydbg(__FILE__ "BoxSetUart failed\n");
- return status;
- }
- mydbg(__FILE__ "BoxSetUart completed.\n");
-
- /* Put this here to make it responsive to stty and defauls set by the tty layer */
- qt_set_termios(tty, port, NULL);
-
- /* Initialize the wait que head */
- init_waitqueue_head(&(port->wait));
-
- /* if we have a bulk endpoint, start reading from it */
- if (serial->num_bulk_in) {
- /* Start reading from the device */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->
- bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- qt_read_bulk_callback, port);
-
- port->ReadBulkStopped = 0;
-
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
- if (result) {
- err("%s - failed resubmitting read urb, error %d\n",
- __func__, result);
- port->ReadBulkStopped = 1;
- }
-
- }
-
- return result;
-}
-
-static void serial_close(struct tty_struct *tty, struct file *filp)
-{
- struct usb_serial_port *port =
- tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
-
- if (!serial)
- return;
-
- down(&port->sem);
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- /* if disconnect beat us to the punch here, there's nothing to do */
- if (tty->driver_data) {
- if (!port->open_count) {
- mydbg("%s - port not opened\n", __func__);
- goto exit;
- }
-
- --port->open_count;
- if (port->open_count <= 0) {
- port->closePending = 1;
- mydbg("%s - port->closePending = 1\n", __func__);
-
- if (serial->dev) {
- qt_close(tty, port, filp);
- port->open_count = 0;
- }
- }
-
- }
-
-exit:
- up(&port->sem);
-
- mydbg("%s - %d return\n", __func__, port->number);
-
-}
-
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
-{
- unsigned long jift = jiffies + 10 * HZ;
- u8 lsr, mcr;
- struct usb_serial *serial = port->serial;
- int status;
- unsigned int index;
-
- struct qt_open_channel_data ChannelData;
- status = 0;
- lsr = 0;
-
- mydbg("%s - port %d\n", __func__, port->number);
- index = tty->index - serial->minor;
-
- /* shutdown any bulk reads that might be going on */
- if (serial->num_bulk_out)
- usb_unlink_urb(port->write_urb);
- if (serial->num_bulk_in)
- usb_unlink_urb(port->read_urb);
-
- /* wait up to 30 seconds for transmitter to empty */
- do {
- status = BoxGetRegister(serial, index, LINE_STATUS_REGISTER, &lsr);
- if (status < 0) {
- mydbg(__FILE__ "box_get_device failed\n");
- break;
- }
-
- if ((lsr & SERIAL_LSR_TEMT)
- && (port->ReadBulkStopped == 1))
- break;
- schedule();
-
- }
- while (jiffies <= jift);
-
- if (jiffies > jift)
- mydbg("%s - port %d timout of checking transmitter empty\n",
- __func__, port->number);
- else
- mydbg("%s - port %d checking transmitter empty succeded\n",
- __func__, port->number);
-
- status =
- BoxGetRegister(serial, index, MODEM_CONTROL_REGISTER,
- &mcr);
- mydbg(__FILE__ "BoxGetRegister MCR = 0x%x.\n", mcr);
-
- if (status >= 0) {
- mcr &= ~(SERIAL_MCR_DTR | SERIAL_MCR_RTS);
- /* status = BoxSetRegister(serial, index, MODEM_CONTROL_REGISTER, mcr); */
- }
-
- /* Close uart channel */
- status = BoxOPenCloseChannel(serial, index, 0, &ChannelData);
- if (status < 0)
- mydbg("%s - port %d BoxOPenCloseChannel failed.\n",
- __func__, port->number);
-
- serial->num_OpenCount--;
-
-}
-
-static int serial_write(struct tty_struct *tty, const unsigned char *buf,
- int count)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial;
- int retval = -EINVAL;
- unsigned int index;
-
- serial = get_usb_serial(port, __func__);
- if (serial == NULL)
- return -ENODEV;
- /* This can happen if we get disconnected a */
- if (port->open_count == 0)
- return -ENODEV;
- index = tty->index - serial->minor;
-
- mydbg("%s - port %d, %d byte(s)\n", __func__, port->number, count);
- mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
- if (!port->open_count) {
- mydbg("%s - port not opened\n", __func__);
- goto exit;
- }
-
- retval = qt_write(tty, port, buf, count);
-
-exit:
- return retval;
-}
-
-static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf, int count)
-{
- int result;
- unsigned int index;
- struct usb_serial *serial = get_usb_serial(port, __func__);
-
- if (serial == NULL)
- return -ENODEV;
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (count == 0) {
- mydbg("%s - write request of 0 bytes\n", __func__);
- return 0;
- }
-
- index = tty->index - serial->minor;
- /* only do something if we have a bulk out endpoint */
- if (serial->num_bulk_out) {
- if (port->write_urb->status == -EINPROGRESS) {
- mydbg("%s - already writing\n", __func__);
- return 0;
- }
-
- count =
- (count > port->bulk_out_size) ? port->bulk_out_size : count;
- memcpy(port->write_urb->transfer_buffer, buf, count);
-
- /* usb_serial_debug_data(__FILE__, __func__, count, port->write_urb->transfer_buffer); */
-
- /* set up our urb */
-
- usb_fill_bulk_urb(port->write_urb, serial->dev,
- usb_sndbulkpipe(serial->dev,
- port->
- bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, count,
- qt_write_bulk_callback, port);
-
- /* send the data out the bulk port */
- result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- if (result)
- mydbg("%s - failed submitting write urb, error %d\n",
- __func__, result);
- else
- result = count;
-
- return result;
- }
-
- /* no bulk out, so return 0 bytes written */
- return 0;
-}
-
-static void qt_write_bulk_callback(struct urb *urb)
-{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
- struct usb_serial *serial = get_usb_serial(port, __func__);
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!serial) {
- mydbg("%s - bad serial pointer, exiting\n", __func__);
- return;
- }
-
- if (urb->status) {
- mydbg("%s - nonzero write bulk status received: %d\n",
- __func__, urb->status);
- return;
- }
- port_softint(&port->work);
- schedule_work(&port->work);
-
- return;
-}
-
-static void port_softint(struct work_struct *work)
-{
- struct usb_serial_port *port =
- container_of(work, struct usb_serial_port, work);
- struct usb_serial *serial = get_usb_serial(port, __func__);
- struct tty_struct *tty;
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!serial)
- return;
-
- tty = port->tty;
- if (!tty)
- return;
-#if 0
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
- && tty->ldisc.write_wakeup) {
- mydbg("%s - write wakeup call.\n", __func__);
- (tty->ldisc.write_wakeup) (tty);
- }
-#endif
-
- wake_up_interruptible(&tty->write_wait);
-}
-static int serial_write_room(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- int retval = -EINVAL;
-
- if (!serial)
- return -ENODEV;
-
- down(&port->sem);
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- retval = qt_write_room(port);
-
-exit:
- up(&port->sem);
- return retval;
-}
-static int qt_write_room(struct usb_serial_port *port)
-{
- struct usb_serial *serial = port->serial;
- int room = 0;
- if (port->closePending == 1) {
- mydbg("%s - port->closePending == 1\n", __func__);
- return -ENODEV;
- }
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (serial->num_bulk_out) {
- if (port->write_urb->status != -EINPROGRESS)
- room = port->bulk_out_size;
- }
-
- mydbg("%s - returns %d\n", __func__, room);
- return room;
-}
-static int serial_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- int retval = -EINVAL;
-
- if (!serial)
- return -ENODEV;
-
- down(&port->sem);
-
- mydbg("%s = port %d\n", __func__, port->number);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- retval = qt_chars_in_buffer(port);
-
-exit:
- up(&port->sem);
- return retval;
-}
-
-static int qt_chars_in_buffer(struct usb_serial_port *port)
-{
- struct usb_serial *serial = port->serial;
- int chars = 0;
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (serial->num_bulk_out) {
- if (port->write_urb->status == -EINPROGRESS)
- chars = port->write_urb->transfer_buffer_length;
- }
-
- mydbg("%s - returns %d\n", __func__, chars);
- return chars;
-}
-
-static int serial_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
-
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- int retval = -ENODEV;
- unsigned int index;
- mydbg("In %s \n", __func__);
-
- if (!serial)
- return -ENODEV;
-
- index = tty->index - serial->minor;
-
- down(&port->sem);
-
- mydbg("%s - port %d \n", __func__, port->number);
- mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- retval = qt_tiocmset(tty, port, file, set);
-
-exit:
- up(&port->sem);
- return retval;
-}
-
-static int qt_tiocmset(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file, unsigned int value)
-{
-
- u8 mcr;
- int status;
- unsigned int index;
- struct usb_serial *serial = get_usb_serial(port, __func__);
-
- if (serial == NULL)
- return -ENODEV;
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- /**************************************************************************************/
- /** TIOCMGET
- */
- index = tty->index - serial->minor;
- status =
- BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
- &mcr);
- if (status < 0)
- return -ESPIPE;
-
- /*
- * Turn off the RTS and DTR and loopbcck and then only turn on what was
- * asked for
- */
- mcr &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
- if (value & TIOCM_RTS)
- mcr |= SERIAL_MCR_RTS;
- if (value & TIOCM_DTR)
- mcr |= SERIAL_MCR_DTR;
- if (value & TIOCM_LOOP)
- mcr |= SERIAL_MCR_LOOP;
-
- status =
- BoxSetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
- mcr);
- if (status < 0)
- return -ESPIPE;
- else
- return 0;
-}
-
-static int serial_tiocmget(struct tty_struct *tty, struct file *file)
-{
-
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- int retval = -ENODEV;
- unsigned int index;
- mydbg("In %s \n", __func__);
-
- if (!serial)
- return -ENODEV;
-
- index = tty->index - serial->minor;
-
- down(&port->sem);
-
- mydbg("%s - port %d\n", __func__, port->number);
- mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- retval = qt_tiocmget(tty, port, file);
-
-exit:
- up(&port->sem);
- return retval;
-}
-
-static int qt_tiocmget(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *file)
-{
-
- u8 mcr;
- u8 msr;
- unsigned int result = 0;
- int status;
- unsigned int index;
-
- struct usb_serial *serial = get_usb_serial(port, __func__);
- if (serial == NULL)
- return -ENODEV;
-
- mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
- /**************************************************************************************/
- /** TIOCMGET
- */
- index = tty->index - serial->minor;
- status =
- BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
- &mcr);
- if (status >= 0) {
- status =
- BoxGetRegister(port->serial, index,
- MODEM_STATUS_REGISTER, &msr);
-
- }
-
- if (status >= 0) {
- result = ((mcr & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
- /* DTR IS SET */
- | ((mcr & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
- /* RTS IS SET */
- | ((msr & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
- /* CTS is set */
- | ((msr & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
- /* Carrier detect is set */
- | ((msr & SERIAL_MSR_RI) ? TIOCM_RI : 0)
- /* Ring indicator set */
- | ((msr & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
- /* DSR is set */
- return result;
-
- } else
- return -ESPIPE;
-}
-
-static int serial_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
-
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- int retval = -ENODEV;
- unsigned int index;
- mydbg("In %s \n", __func__);
-
- if (!serial)
- return -ENODEV;
-
- index = tty->index - serial->minor;
-
- down(&port->sem);
-
- mydbg("%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd);
- mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- retval = qt_ioctl(tty, port, file, cmd, arg);
-
-exit:
- up(&port->sem);
- return retval;
-}
-static int qt_ioctl(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file, unsigned int cmd, unsigned long arg)
-{
- __u8 mcr;
- __u8 msr;
- unsigned short prev_msr;
- unsigned int value, result = 0;
- int status;
- unsigned int index;
-
- struct usb_serial *serial = get_usb_serial(port, __func__);
- if (serial == NULL)
- return -ENODEV;
-
- mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
- /* TIOCMGET */
- index = tty->index - serial->minor;
-
- if (cmd == TIOCMIWAIT) {
- DECLARE_WAITQUEUE(wait, current);
- prev_msr = port->shadowMSR & SERIAL_MSR_MASK;
- while (1) {
- add_wait_queue(&port->wait, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- remove_wait_queue(&port->wait, &wait);
- /* see if a signal woke us up */
- if (signal_pending(current))
- return -ERESTARTSYS;
- msr = port->shadowMSR & SERIAL_MSR_MASK;
- if (msr == prev_msr)
- return -EIO; /* no change error */
-
- if ((arg & TIOCM_RNG
- && ((prev_msr & SERIAL_MSR_RI) ==
- (msr & SERIAL_MSR_RI)))
- || (arg & TIOCM_DSR
- && ((prev_msr & SERIAL_MSR_DSR) ==
- (msr & SERIAL_MSR_DSR)))
- || (arg & TIOCM_CD
- && ((prev_msr & SERIAL_MSR_CD) ==
- (msr & SERIAL_MSR_CD)))
- || (arg & TIOCM_CTS
- && ((prev_msr & SERIAL_MSR_CTS) ==
- (msr & SERIAL_MSR_CTS)))) {
- return 0;
- }
-
- }
-
- }
- mydbg("%s -No ioctl for that one. port = %d\n", __func__,
- port->number);
-
- return -ENOIOCTLCMD;
-}
-
-static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
-{
- struct usb_serial_port *port =
- tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
-
- if (!serial)
- return;
-
- down(&port->sem);
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- /* pass on to the driver specific version of this function if it is available */
- qt_set_termios(tty, port, old);
-
-exit:
- up(&port->sem);
-}
-
-static void qt_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- unsigned int cflag;
- int baud, divisor, remainder;
- unsigned char new_LCR = 0;
- int status;
- struct usb_serial *serial;
- __u16 index;
- __u16 tmp, tmp2;
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- tmp = port->tty->index;
- mydbg("%s - MINOR(port->tty->index) = %d\n", __func__, tmp);
-
- serial = port->serial;
- tmp2 = serial->minor;
- mydbg("%s - serial->minor = %d\n", __func__, tmp2);
-
- index = port->tty->index - serial->minor;
-
- cflag = tty->termios->c_cflag;
-
- mydbg("%s - 3\n", __func__);
-
- switch (cflag) {
- case CS5:
- new_LCR |= SERIAL_5_DATA;
- break;
- case CS6:
- new_LCR |= SERIAL_6_DATA;
- break;
- case CS7:
- new_LCR |= SERIAL_7_DATA;
- break;
- default:
- case CS8:
- new_LCR |= SERIAL_8_DATA;
- break;
- }
-
- /* Parity stuff */
- if (cflag & PARENB) {
- if (cflag & PARODD)
- new_LCR |= SERIAL_ODD_PARITY;
- else
- new_LCR |= SERIAL_EVEN_PARITY;
- }
- if (cflag & CSTOPB)
- new_LCR |= SERIAL_TWO_STOPB;
- else
- new_LCR |= SERIAL_TWO_STOPB;
-
- mydbg("%s - 4\n", __func__);
- /* Thats the LCR stuff, go ahead and set it */
- baud = tty_get_baud_rate(tty);
- if (!baud)
- /* pick a default, any default... */
- baud = 9600;
-
- mydbg("%s - got baud = %d\n", __func__, baud);
-
- divisor = MAX_BAUD_RATE / baud;
- remainder = MAX_BAUD_RATE % baud;
- /* Round to nearest divisor */
- if (((remainder * 2) >= baud) && (baud != 110))
- divisor++;
-
- /*
- * Set Baud rate to default and turn off (default)flow control here
- */
- status = BoxSetUart(serial, index, (unsigned short)divisor, new_LCR);
- if (status < 0) {
- mydbg(__FILE__ "BoxSetUart failed\n");
- return;
- }
-
- /* Now determine flow control */
- if (cflag & CRTSCTS) {
- mydbg("%s - Enabling HW flow control port %d\n", __func__,
- port->number);
-
- /* Enable RTS/CTS flow control */
- status = BoxSetHW_FlowCtrl(serial, index, 1);
-
- if (status < 0) {
- mydbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
- return;
- }
- } else {
- /* Disable RTS/CTS flow control */
- mydbg("%s - disabling HW flow control port %d\n", __func__,
- port->number);
-
- status = BoxSetHW_FlowCtrl(serial, index, 0);
- if (status < 0) {
- mydbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
- return;
- }
-
- }
-
- /* if we are implementing XON/XOFF, set the start and stop character in
- * the device */
- if (I_IXOFF(tty) || I_IXON(tty)) {
- unsigned char stop_char = STOP_CHAR(tty);
- unsigned char start_char = START_CHAR(tty);
- status =
- BoxSetSW_FlowCtrl(serial, index, stop_char,
- start_char);
- if (status < 0)
- mydbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n");
-
- } else {
- /* disable SW flow control */
- status = BoxDisable_SW_FlowCtrl(serial, index);
- if (status < 0)
- mydbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
-
- }
- tty->termios->c_cflag &= ~CMSPAR;
- /* FIXME: Error cases should be returning the actual bits changed only */
-}
-
-/****************************************************************************
-* BoxGetRegister
-* issuse a GET_REGISTER vendor-spcific request on the default control pipe
-* If successful, fills in the pValue with the register value asked for
-****************************************************************************/
-static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
- unsigned short Register_Num, __u8 *pValue)
-{
- int result;
- __u16 current_length;
-
- current_length = sizeof(struct qt_get_device_data);
-
- result =
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- QT_GET_SET_REGISTER, 0xC0, Register_Num,
- Uart_Number, (void *)pValue, sizeof(*pValue), 300);
-
- return result;
-}
-
-/****************************************************************************
-* BoxSetRegister
-* issuse a GET_REGISTER vendor-spcific request on the default control pipe
-* If successful, fills in the pValue with the register value asked for
-****************************************************************************/
-static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
- unsigned short Register_Num, unsigned short Value)
-{
- int result;
- unsigned short RegAndByte;
-
- RegAndByte = Value;
- RegAndByte = RegAndByte << 8;
- RegAndByte = RegAndByte + Register_Num;
-
-/*
- result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_GET_SET_REGISTER, 0xC0, Register_Num,
- Uart_Number, NULL, 0, 300);
-*/
-
- result =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_GET_SET_REGISTER, 0x40, RegAndByte, Uart_Number,
- NULL, 0, 300);
-
- return result;
-}
-
-/**
- * box_get_device
- * Issue a GET_DEVICE vendor-specific request on the default control pipe If
- * successful, fills in the qt_get_device_data structure pointed to by
- * device_data, otherwise return a negative error number of the problem.
- */
-static int box_get_device(struct usb_serial *serial,
- struct qt_get_device_data *device_data)
-{
- int result;
- __u16 current_length;
- unsigned char *transfer_buffer;
-
- current_length = sizeof(struct qt_get_device_data);
- transfer_buffer = kmalloc(current_length, GFP_KERNEL);
- if (!transfer_buffer)
- return -ENOMEM;
-
- result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- QT_SET_GET_DEVICE, 0xc0, 0, 0,
- transfer_buffer, current_length, 300);
- if (result > 0)
- memcpy(device_data, transfer_buffer, current_length);
- kfree(transfer_buffer);
-
- return result;
-}
-
-/**
- * box_set_device
- * Issue a SET_DEVICE vendor-specific request on the default control pipe If
- * successful returns the number of bytes written, otherwise it returns a
- * negative error number of the problem.
- */
-static int box_set_device(struct usb_serial *serial,
- struct qt_get_device_data *device_data)
-{
- int result;
- __u16 length;
- __u16 PortSettings;
-
- PortSettings = ((__u16) (device_data->portb));
- PortSettings = (PortSettings << 8);
- PortSettings += ((__u16) (device_data->porta));
-
- length = sizeof(struct qt_get_device_data);
- mydbg("%s - PortSettings = 0x%x\n", __func__, PortSettings);
-
- result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_SET_GET_DEVICE, 0x40, PortSettings,
- 0, NULL, 0, 300);
- return result;
-}
-
-/****************************************************************************
- * BoxOPenCloseChannel
- * This funciotn notifies the device that the device driver wishes to open a particular UART channel. its
- * purpose is to allow the device driver and the device to synchronize state information.
- * OpenClose = 1 for open , 0 for close
- ****************************************************************************/
-static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number,
- __u16 OpenClose,
- struct qt_open_channel_data *pDeviceData)
-{
- int result;
- __u16 length;
- __u8 Direcion;
- unsigned int pipe;
- length = sizeof(struct qt_open_channel_data);
-
- /* if opening... */
- if (OpenClose == 1) {
- Direcion = USBD_TRANSFER_DIRECTION_IN;
- pipe = usb_rcvctrlpipe(serial->dev, 0);
- result =
- usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
- Direcion, OpenClose, Uart_Number,
- pDeviceData, length, 300);
-
- } else {
- Direcion = USBD_TRANSFER_DIRECTION_OUT;
- pipe = usb_sndctrlpipe(serial->dev, 0);
- result =
- usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
- Direcion, OpenClose, Uart_Number, NULL, 0,
- 300);
-
- }
-
- return result;
-}
-
-/****************************************************************************
- * BoxSetPrebufferLevel
- TELLS BOX WHEN TO ASSERT FLOW CONTROL
- ****************************************************************************/
-static int BoxSetPrebufferLevel(struct usb_serial *serial)
-{
- int result;
- __u16 buffer_length;
-
- buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
- result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_GET_SET_PREBUF_TRIG_LVL, 0x40,
- buffer_length, 0, NULL, 0, 300);
- return result;
-}
-
-/****************************************************************************
- * BoxSetATC
- TELLS BOX WHEN TO ASSERT automatic transmitter control
- ****************************************************************************/
-static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode)
-{
- int result;
- __u16 buffer_length;
-
- buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
-
- result =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_SET_ATF, 0x40, n_Mode, 0, NULL, 0, 300);
-
- return result;
-}
-
-/****************************************************************************
-* BoxSetUart
-* issuse a SET_UART vendor-spcific request on the default control pipe
-* If successful sets baud rate divisor and LCR value
-****************************************************************************/
-static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
- unsigned short default_divisor, unsigned char default_LCR)
-{
- int result;
- unsigned short UartNumandLCR;
-
- UartNumandLCR = (default_LCR << 8) + Uart_Number;
-
- result =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_GET_SET_UART, 0x40, default_divisor,
- UartNumandLCR, NULL, 0, 300);
-
- return result;
-}
-
-static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
- int bSet)
-{
- __u8 mcr = 0;
- __u8 msr = 0, MOUT_Value = 0;
- struct usb_serial_port *port;
- unsigned int status;
-
- port = serial->port;
-
- if (bSet == 1) {
- /* flow control, box will clear RTS line to prevent remote */
- mcr = SERIAL_MCR_RTS;
- } /* device from xmitting more chars */
- else {
- /* no flow control to remote device */
- mcr = 0;
-
- }
- MOUT_Value = mcr << 8;
-
- if (bSet == 1) {
- /* flow control, box will inhibit xmit data if CTS line is
- * asserted */
- msr = SERIAL_MSR_CTS;
- } else {
- /* Box will not inhimbe xmit data due to CTS line */
- msr = 0;
- }
- MOUT_Value |= msr;
-
- status =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value,
- index, NULL, 0, 300);
- return status;
-
-}
-
-static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 index,
- unsigned char stop_char, unsigned char start_char)
-{
- __u16 nSWflowout;
- int result;
-
- nSWflowout = start_char << 8;
- nSWflowout = (unsigned short)stop_char;
-
- result =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout,
- index, NULL, 0, 300);
- return result;
-
-}
-static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index)
-{
- int result;
-
- result =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index,
- NULL, 0, 300);
- return result;
-
-}
-
-static void serial_throttle(struct tty_struct *tty)
-{
- struct usb_serial_port *port =
- tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!serial)
- return;
-
- down(&port->sem);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
- /* shut down any bulk reads that may be going on */
-/* usb_unlink_urb (port->read_urb); */
- /* pass on to the driver specific version of this function */
- port->RxHolding = 1;
- mydbg("%s - port->RxHolding = 1\n", __func__);
-
-exit:
- up(&port->sem);
- return;
-}
-
-static void serial_unthrottle(struct tty_struct *tty)
-{
- struct usb_serial_port *port =
- tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- unsigned int result;
-
- if (!serial)
- return;
- down(&port->sem);
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- if (port->RxHolding == 1) {
- mydbg("%s -port->RxHolding == 1\n", __func__);
-
- port->RxHolding = 0;
- mydbg("%s - port->RxHolding = 0\n", __func__);
-
- /* if we have a bulk endpoint, start it up */
- if ((serial->num_bulk_in) && (port->ReadBulkStopped == 1)) {
- /* Start reading from the device */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->
- bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->
- transfer_buffer_length,
- qt_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- err("%s - failed restarting read urb, error %d",
- __func__, result);
- }
- }
-exit:
- up(&port->sem);
- return;
-
-}
-
-static int serial_break(struct tty_struct *tty, int break_state)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = get_usb_serial(port, __func__);
- u16 index, onoff;
- unsigned int result;
-
- index = tty->index - serial->minor;
- if (!serial)
- return -ENODEV;
-
- if (break_state == -1)
- onoff = 1;
- else
- onoff = 0;
-
- down(&port->sem);
-
- mydbg("%s - port %d\n", __func__, port->number);
-
- if (!port->open_count) {
- mydbg("%s - port not open\n", __func__);
- goto exit;
- }
-
- result =
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_BREAK_CONTROL, 0x40, onoff, index,
- NULL, 0, 300);
-
-exit:
- up(&port->sem);
- return 0;
-}
-
-static int ioctl_serial_usb(struct inode *innod, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
-
- unsigned err;
- unsigned ucOPR_NewValue, uc_Value;
- int *p_Num_of_adapters, counts, index, *p_QMCR_Value;
- struct identity *p_Identity_of;
- struct identity Identity_of;
- struct usb_serial *lastserial, *serial;
-
- mydbg(KERN_DEBUG "ioctl_serial_usb cmd =\n");
- if (_IOC_TYPE(cmd) != SERIALQT_PCI_IOC_MAGIC)
- return -ENOTTY;
- if (_IOC_NR(cmd) > SERIALQT_IOC_MAXNR)
- return -ENOTTY;
- mydbg(KERN_DEBUG "ioctl_serial_usb cmd = 0x%x\n", cmd);
- err = 0;
- switch (cmd) {
-
- case SERIALQT_WRITE_QMCR:
- err = -ENOTTY;
- index = arg >> 16;
- counts = 0;
-
- ucOPR_NewValue = arg;
-
- err = EmulateWriteQMCR_Reg(index, ucOPR_NewValue);
- break;
-
- case SERIALQT_READ_QMCR:
- err = -ENOTTY;
- p_QMCR_Value = (int *)arg;
- index = arg >> 16;
- counts = 0;
-
- err = EmulateReadQMCR_Reg(index, &uc_Value);
- if (err == 0)
- err = put_user(uc_Value, p_QMCR_Value);
- break;
-
- case SERIALQT_GET_NUMOF_UNITS:
- p_Num_of_adapters = (int *)arg;
- counts = 0; /* Initialize counts to zero */
- /* struct usb_serial *lastserial = serial_table[0], *serial; */
- lastserial = serial_table[0];
-
- mydbg(KERN_DEBUG "SERIALQT_GET_NUMOF_UNITS \n");
- /* if first pointer is nonull, we at least have one box */
- if (lastserial)
- counts = 1; /* we at least have one box */
-
- for (index = 1; index < SERIAL_TTY_MINORS; index++) {
- serial = serial_table[index];
- if (serial) {
- if (serial != lastserial) {
- /* we had a change in the array, hence
- * another box is there */
- lastserial = serial;
- counts++;
- }
- } else
- break;
- }
-
- mydbg(KERN_DEBUG "ioctl_serial_usb writting counts = %d",
- counts);
-
- err = put_user(counts, p_Num_of_adapters);
-
- break;
- case SERIALQT_GET_THIS_UNIT:
- counts = 0;
- p_Identity_of = (struct identity *)arg;
- /* copy user structure to local variable */
- get_user(Identity_of.index, &p_Identity_of->index);
- mydbg(KERN_DEBUG "SERIALQT_GET_THIS_UNIT Identity_of.index\n");
- mydbg(KERN_DEBUG
- "SERIALQT_GET_THIS_UNIT Identity_of.index= 0x%x\n",
- Identity_of.index);
-
- err = -ENOTTY;
- serial = find_the_box(Identity_of.index);
- if (serial) {
- err =
- put_user(serial->product,
- &p_Identity_of->n_identity);
-
- }
- break;
-
- case SERIALQT_IS422_EXTENDED:
- err = -ENOTTY;
- mydbg(KERN_DEBUG "SERIALQT_IS422_EXTENDED \n");
- index = arg >> 16;
-
- counts = 0;
-
- mydbg(KERN_DEBUG
- "SERIALQT_IS422_EXTENDED, looking Identity_of.indext = 0x%x\n",
- index);
- serial = find_the_box(index);
- if (serial) {
- mydbg("%s index = 0x%x, serial = 0x%p\n", __func__,
- index, serial);
- for (counts = 0; serqt_422_table[counts] != 0; counts++) {
-
- mydbg
- ("%s serial->product = = 0x%x, serqt_422_table[counts] = 0x%x\n",
- __func__, serial->product,
- serqt_422_table[counts]);
- if (serial->product == serqt_422_table[counts]) {
- err = 0;
-
- mydbg
- ("%s found match for 422extended\n",
- __func__);
- break;
- }
- }
- }
- break;
-
- default:
- err = -ENOTTY;
- }
-
- mydbg("%s returning err = 0x%x\n", __func__, err);
- return err;
-}
-
-static struct usb_serial *find_the_box(unsigned int index)
-{
- struct usb_serial *lastserial, *foundserial, *serial;
- int counts = 0, index2;
- lastserial = serial_table[0];
- foundserial = NULL;
- for (index2 = 0; index2 < SERIAL_TTY_MINORS; index2++) {
- serial = serial_table[index2];
-
- mydbg("%s index = 0x%x, index2 = 0x%x, serial = 0x%p\n",
- __func__, index, index2, serial);
-
- if (serial) {
- /* first see if this is the unit we'er looking for */
- mydbg
- ("%s inside if(serial) counts = 0x%x , index = 0x%x\n",
- __func__, counts, index);
- if (counts == index) {
- /* we found the one we're looking for, copythe
- * product Id to user */
- mydbg("%s we found the one we're looking for serial = 0x%p\n",
- __func__, serial);
- foundserial = serial;
- break;
- }
-
- if (serial != lastserial) {
- /* when we have a change in the pointer */
- lastserial = serial;
- counts++;
- }
- } else
- break; /* no matches */
- }
-
- mydbg("%s returning foundserial = 0x%p\n", __func__, foundserial);
- return foundserial;
-}
-
-static int EmulateWriteQMCR_Reg(int index, unsigned uc_value)
-{
-
- __u16 ATC_Mode = 0;
- struct usb_serial *serial;
- int status;
- struct qt_get_device_data DeviceData;
- unsigned uc_temp = 0;
- mydbg("Inside %s, uc_value = 0x%x\n", __func__, uc_value);
-
- DeviceData.porta = 0;
- DeviceData.portb = 0;
- serial = find_the_box(index);
- /* Determine Duplex mode */
- if (!(serial))
- return -ENOTTY;
- status = box_get_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_set_device failed\n");
- return status;
- }
-
- uc_temp = uc_value & QMCR_HALF_DUPLEX_MASK;
- switch (uc_temp) {
- case QMCR_FULL_DUPLEX:
- DeviceData.porta &= ~DUPMODE_BITS;
- DeviceData.porta |= FULL_DUPLEX;
- ATC_Mode = ATC_DISABLED;
- break;
- case QMCR_HALF_DUPLEX_RTS:
- DeviceData.porta &= ~DUPMODE_BITS;
- DeviceData.porta |= HALF_DUPLEX_RTS;
- ATC_Mode = ATC_RTS_ENABLED;
- break;
- case QMCR_HALF_DUPLEX_DTR:
- DeviceData.porta &= ~DUPMODE_BITS;
- DeviceData.porta |= HALF_DUPLEX_DTR;
- ATC_Mode = ATC_DTR_ENABLED;
- break;
- default:
- break;
- }
-
- uc_temp = uc_value & QMCR_CONNECTOR_MASK;
- switch (uc_temp) {
- case QMCR_MODEM_CONTROL:
- DeviceData.portb &= ~LOOPMODE_BITS; /* reset connection bits */
- DeviceData.portb |= MODEM_CTRL;
- break;
- case QMCR_ALL_LOOPBACK:
- DeviceData.portb &= ~LOOPMODE_BITS; /* reset connection bits */
- DeviceData.portb |= ALL_LOOPBACK;
- break;
- }
-
- mydbg(__FILE__ "Calling box_set_device with failed\n");
- status = box_set_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_set_device failed\n");
- return status;
- }
-
- /* This bit (otherwise unused) i'll used to detect whether ATC is
- * selected */
- if (uc_value & QMCR_RX_EN_MASK) {
-
- mydbg(__FILE__
- "calling BoxsetATC with DeviceData.porta = 0x%x and DeviceData.portb = 0x%x\n",
- DeviceData.porta, DeviceData.portb);
- status = BoxSetATC(serial, ATC_Mode);
- if (status < 0) {
- mydbg(__FILE__ "BoxSetATC failed\n");
- return status;
- }
- } else {
-
- mydbg(__FILE__
- "calling BoxsetATC with DeviceData.porta = 0x%x and DeviceData.portb = 0x%x\n",
- DeviceData.porta, DeviceData.portb);
- status = BoxSetATC(serial, ATC_DISABLED);
- if (status < 0) {
- mydbg(__FILE__ "BoxSetATC failed\n");
- return status;
- }
- }
-
- return 0;
-
-}
-
-static int EmulateReadQMCR_Reg(int index, unsigned *uc_value)
-{
- struct usb_serial *serial;
- int status;
- struct qt_get_device_data DeviceData;
- __u8 uc_temp;
-
- *uc_value = 0;
-
- serial = find_the_box(index);
- if (!(serial))
- return -ENOTTY;
-
- status = box_get_device(serial, &DeviceData);
- if (status < 0) {
- mydbg(__FILE__ "box_get_device failed\n");
- return status;
- }
- uc_temp = DeviceData.porta & DUPMODE_BITS;
- switch (uc_temp) {
- case FULL_DUPLEX:
- *uc_value |= QMCR_FULL_DUPLEX;
- break;
- case HALF_DUPLEX_RTS:
- *uc_value |= QMCR_HALF_DUPLEX_RTS;
- break;
- case HALF_DUPLEX_DTR:
- *uc_value |= QMCR_HALF_DUPLEX_DTR;
- break;
- default:
- break;
- }
-
- /* I use this for ATC control se */
- uc_temp = DeviceData.portb & LOOPMODE_BITS;
-
- switch (uc_temp) {
- case ALL_LOOPBACK:
- *uc_value |= QMCR_ALL_LOOPBACK;
- break;
- case MODEM_CTRL:
- *uc_value |= QMCR_MODEM_CONTROL;
- break;
- default:
- break;
-
- }
- return 0;
-
-}
-
-static int __init serqt_usb_init(void)
-{
- int i, result;
- int status = 0;
-
- mydbg("%s\n", __func__);
- tty_set_operations(&serial_tty_driver, &serial_ops);
- result = tty_register_driver(&serial_tty_driver);
- if (result) {
- mydbg("tty_register_driver failed error = 0x%x", result);
- return result;
- }
-
- /* Initalize our global data */
- for (i = 0; i < SERIAL_TTY_MINORS; ++i)
- serial_table[i] = NULL;
-
- /* register this driver with the USB subsystem */
- result = usb_register(&serqt_usb_driver);
- if (result < 0) {
- err("usb_register failed for the " __FILE__
- " driver. Error number %d", result);
- return result;
- }
- status = 0; /* Dynamic assignment of major number */
- major_number =
- register_chrdev(status, "SerialQT_USB", &serialqt_usb_fops);
- if (major_number < 0) {
- mydbg(KERN_DEBUG "No devices found \n\n");
- return -EBUSY;
- } else
- mydbg(KERN_DEBUG "SerQT_USB major number assignment = %d \n\n",
- major_number);
-
- printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION);
- return 0;
-}
-
-static void __exit serqt_usb_exit(void)
-{
- /* deregister this driver with the USB subsystem */
- usb_deregister(&serqt_usb_driver);
- tty_unregister_driver(&serial_tty_driver);
- unregister_chrdev(major_number, "SerialQT_USB");
-}
-
-module_init(serqt_usb_init);
-module_exit(serqt_usb_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
--
1.6.3.2
