[PATCH 191/342] Staging: rt2860: remove dead RALINK_ATE code

[gregkh at suse.de (Greg Kroah-Hartman)]

From: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 drivers/staging/rt2860/common/action.c    |    5 -
 drivers/staging/rt2860/common/ba_action.c |    6 -
 drivers/staging/rt2860/common/cmm_data.c  |  131 -
 drivers/staging/rt2860/common/cmm_sync.c  |    6 -
 drivers/staging/rt2860/common/mlme.c      |  123 +-
 drivers/staging/rt2860/common/rtmp_init.c |   44 -
 drivers/staging/rt2860/oid.h              |    9 -
 drivers/staging/rt2860/rt_ate.c           | 5947 -----------------------------
 drivers/staging/rt2860/rt_ate.h           |  315 --
 drivers/staging/rt2860/rt_config.h        |    4 -
 drivers/staging/rt2860/rt_main_dev.c      |    9 -
 drivers/staging/rt2860/rtmp.h             |   87 -
 drivers/staging/rt2860/rtmp_def.h         |   20 -
 drivers/staging/rt2860/sta/connect.c      |   26 -
 drivers/staging/rt2860/sta/rtmp_data.c    |   24 -
 drivers/staging/rt2860/sta/sync.c         |   16 -
 drivers/staging/rt2860/sta_ioctl.c        |  136 -
 17 files changed, 1 insertions(+), 6907 deletions(-)
 delete mode 100644 drivers/staging/rt2860/rt_ate.c
 delete mode 100644 drivers/staging/rt2860/rt_ate.h

diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c
index d6f530f..ef648ac 100644
--- a/drivers/staging/rt2860/common/action.c
+++ b/drivers/staging/rt2860/common/action.c
@@ -881,11 +881,6 @@ VOID ORIBATimerTimeout(
 	INT			i, total;
 	UCHAR			TID;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	total = pAd->MacTab.Size * NUM_OF_TID;
 
 	for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)
diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c
index ce2e262..4b3f6da 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -1092,12 +1092,6 @@ VOID BAOriSessionSetupTimeout(
 	}
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
 	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index b3f88f5..5b74a71 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -1771,85 +1771,6 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 	RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF, &pTxRing->TxDmaIdx);
 	while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx)
 	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		PHEADER_802_11	pHeader80211;
-
-		if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
-		{
-			if (pAd->ate.QID == QueIdx)
-			{
-				pAd->ate.TxDoneCount++;
-				//pAd->ate.Repeat++;
-				pAd->RalinkCounters.KickTxCount++;
-
-				/* always use QID_AC_BE and FIFO_EDCA */
-				ASSERT(pAd->ate.QID == 0);
-				pAd->ate.TxAc0++;
-
-				FREE++;
-#ifndef RT_BIG_ENDIAN
-				pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-				pOriTxD = pTxD;
-		        NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
-				pTxD = &TxD;
-#else
-		        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-		        pOriTxD = pDestTxD ;
-		        TxD = *pDestTxD;
-		        pTxD = &TxD;
-		        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-
-				pHeader80211 = pTxRing->Cell[pTxRing->TxSwFreeIdx].DmaBuf.AllocVa + sizeof(TXWI_STRUC);
-#ifdef RT_BIG_ENDIAN
-				RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_READ, FALSE);
-#endif
-				pHeader80211->Sequence = ++pAd->ate.seq;
-#ifdef RT_BIG_ENDIAN
-				RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_WRITE, FALSE);
-#endif
-
-				if  ((pAd->ate.bQATxStart == TRUE) && (pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.TxDoneCount < pAd->ate.TxCount))
-				{
-					pAd->RalinkCounters.TransmittedByteCount +=  (pTxD->SDLen1 + pTxD->SDLen0);
-					pAd->RalinkCounters.OneSecDmaDoneCount[QueIdx] ++;
-					INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
-					/* get tx_tdx_idx again */
-					RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF ,  &pTxRing->TxDmaIdx);
-					goto kick_out;
-				}
-				else if ((pAd->ate.TxStatus == 1)/* or (pAd->ate.bQATxStart == TRUE) ??? */ && (pAd->ate.TxDoneCount == pAd->ate.TxCount))//<========================PETER
-				{
-					DBGPRINT(RT_DEBUG_TRACE,("all Tx is done\n"));
-					// Tx status enters idle mode.
-					pAd->ate.TxStatus = 0;
-				}
-				else if (!(pAd->ate.Mode & ATE_TXFRAME))
-				{
-					/* not complete sending yet, but someone press the Stop TX botton. */
-					DBGPRINT(RT_DEBUG_ERROR,("not complete sending yet, but someone pressed the Stop TX bottom\n"));
-					DBGPRINT(RT_DEBUG_ERROR,("pAd->ate.Mode = 0x%02x\n", pAd->ate.Mode));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_OFF,("pTxRing->TxSwFreeIdx = %d\n", pTxRing->TxSwFreeIdx));
-  				}
-#ifndef RT_BIG_ENDIAN
-	        	NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#else
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        		*pDestTxD = TxD;
-#endif // RT_BIG_ENDIAN //
-
-				INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
-				continue;
-			}
-		}
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 		// static rate also need NICUpdateFifoStaCounters() function.
 		//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
 			NICUpdateFifoStaCounters(pAd);
@@ -1871,11 +1792,6 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 
 		pTxD->DMADONE = 0;
 
-
-#ifdef RALINK_ATE
-		/* Execution of this block is not allowed when ATE is running. */
-		if (!(ATE_ON(pAd)))
-#endif // RALINK_ATE //
 /*====================================================================*/
 		{
 			pPacket = pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket;
@@ -1921,53 +1837,6 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 #else
         NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
 #endif
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-kick_out:
-#endif // RALINK_28xx_QA //
-
-		//
-		// ATE_TXCONT mode also need to send some normal frames, so let it in.
-		// ATE_STOP must be changed not to be 0xff
-		// to prevent it from running into this block.
-		//
-		if ((pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.QID == QueIdx))
-		{
-			// TxDoneCount++ has been done if QA is used.
-			if (pAd->ate.bQATxStart == FALSE)
-			{
-				pAd->ate.TxDoneCount++;
-			}
-			if (((pAd->ate.TxCount - pAd->ate.TxDoneCount + 1) >= TX_RING_SIZE))
-			{
-				/* Note : We increase TxCpuIdx here, not TxSwFreeIdx ! */
-				INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
-#ifndef RT_BIG_ENDIAN//<==========================PETER
-				pTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
-				pOriTxD = pTxD;
-		        NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
-				pTxD = &TxD;
-#else
-		        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
-		        pOriTxD = pDestTxD ;
-		        TxD = *pDestTxD;
-		        pTxD = &TxD;
-		        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-#ifndef RT_BIG_ENDIAN//<==========================PETER
-        		NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#else
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        		*pDestTxD = TxD;
-#endif
-				// kick Tx-Ring.
-				RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * RINGREG_DIFF, pAd->TxRing[QueIdx].TxCpuIdx);
-				pAd->RalinkCounters.KickTxCount++;
-			}
-		}
-#endif // RALINK_ATE //
 	}
 
 
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index d29e0b6..1e88d36 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -397,12 +397,6 @@ VOID ScanNextChannel(
 	}
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index 1cb941c..e3ff743 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -589,14 +589,6 @@ VOID MlmeHandler(
 			break;
 		}
 
-#ifdef RALINK_ATE
-		if(ATE_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
-			break;
-		}
-#endif // RALINK_ATE //
-
 		//From message type, determine which state machine I should drive
 		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
 		{
@@ -906,18 +898,6 @@ VOID MlmePeriodicExec(
 
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef RALINK_ATE
-	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
-	if (ATE_ON(pAd))
-	{
-		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
-	{
-			pAd->Mlme.PeriodicRound ++;
-			return;
-		}
-	}
-#endif // RALINK_ATE //
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
@@ -971,30 +951,6 @@ VOID MlmePeriodicExec(
 	{
                 pAd->Mlme.OneSecPeriodicRound ++;
 
-#ifdef RALINK_ATE
-    	if (ATE_ON(pAd))
-    	{
-			/* request from Baron : move this routine from later to here */
-			/* for showing Rx error count in ATE RXFRAME */
-            NICUpdateRawCounters(pAd);
-			if (pAd->ate.bRxFer == 1)
-			{
-				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
-			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
-				pAd->ate.RxCntPerSec = 0;
-
-				if (pAd->ate.RxAntennaSel == 0)
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
-						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
-				else
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
-			}
-			MlmeResetRalinkCounters(pAd);
-			return;
-    	}
-#endif // RALINK_ATE //
-
-
 		if (rx_Total)
 		{
 
@@ -1103,17 +1059,6 @@ VOID STAMlmePeriodicExec(
 {
 	ULONG			    TxTotalCnt;
 
-//
-// We return here in ATE mode, because the statistics
-// that ATE needs are not collected via this routine.
-//
-#ifdef RALINK_ATE
-	// It is supposed that we will never reach here in ATE mode.
-	ASSERT(!(ATE_ON(pAd)));
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 #ifdef WPA_SUPPLICANT_SUPPORT
     if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
 #endif // WPA_SUPPLICANT_SUPPORT //
@@ -2127,13 +2072,6 @@ VOID MlmeDynamicTxRateSwitching(
 	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
 	MAC_TABLE_ENTRY			*pEntry;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
 	/*if (pAd->Antenna.field.RxPath > 1)
 		Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
 	else
@@ -4922,12 +4860,6 @@ BOOLEAN MlmeEnqueueForRecv(
 	INT		 MsgType;
 	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if(ATE_ON(pAd))
-		return FALSE;
-#endif // RALINK_ATE //
-
 	// Do nothing if the driver is starting halt state.
 	// This might happen when timer already been fired before cancel timer with mlmehalt
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
@@ -5634,11 +5566,6 @@ VOID 	AsicUpdateProtect(
 	UCHAR			i;
 	UINT32 MacReg = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 	if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
 	{
@@ -7596,9 +7523,7 @@ BOOLEAN AsicSendCommandToMcu(
 	HOST_CMD_CSR_STRUC	H2MCmd;
 	H2M_MAILBOX_STRUC	H2MMailbox;
 	ULONG				i = 0;
-#ifdef RALINK_ATE
-	static UINT32 j = 0;
-#endif // RALINK_ATE //
+
 	do
 	{
 		RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
@@ -7610,30 +7535,6 @@ BOOLEAN AsicSendCommandToMcu(
 
 	if (i >= 100)
 	{
-#ifdef RALINK_ATE
-		if (pAd->ate.bFWLoading == TRUE)
-		{
-			/* reloading firmware when received iwpriv cmd "ATE=ATESTOP" */
-			if (j > 0)
-			{
-				if (j % 64 != 0)
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("#"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("\n"));
-				}
-				++j;
-			}
-			else if (j == 0)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("Loading firmware. Please wait for a moment...\n"));
-				++j;
-			}
-		}
-		else
-#endif // RALINK_ATE //
 		{
 			UINT32 Data;
 
@@ -7661,16 +7562,6 @@ BOOLEAN AsicSendCommandToMcu(
 		//return FALSE;
 	}
 
-#ifdef RALINK_ATE
-	else if (pAd->ate.bFWLoading == TRUE)
-	{
-		/* reloading of firmware is completed */
-		pAd->ate.bFWLoading = FALSE;
-		DBGPRINT(RT_DEBUG_ERROR, ("\n"));
-		j = 0;
-	}
-#endif // RALINK_ATE //
-
 	H2MMailbox.field.Owner	  = 1;	   // pass ownership to MCU
 	H2MMailbox.field.CmdToken = Token;
 	H2MMailbox.field.HighByte = Arg1;
@@ -8126,12 +8017,6 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
@@ -8211,12 +8096,6 @@ VOID AsicRxAntEvalTimeout(
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index 320a50a..1351e65 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -2214,12 +2214,6 @@ VOID NICUpdateFifoStaCounters(
 	CHAR				reTry;
 	UCHAR				succMCS;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 		do
 		{
 			RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
@@ -3171,37 +3165,6 @@ VOID	UserCfgInit(
 	InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
 	NdisAllocateSpinLock(&pAd->MacTabLock);
 
-#ifdef RALINK_ATE
-	NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
-	pAd->ate.Mode = ATE_STOP;
-	pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
-	pAd->ate.TxLength = 1024;
-	pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
-	pAd->ate.TxWI.PHYMODE = MODE_CCK;
-	pAd->ate.TxWI.MCS = 3;
-	pAd->ate.TxWI.BW = BW_20;
-	pAd->ate.Channel = 1;
-	pAd->ate.QID = QID_AC_BE;
-	pAd->ate.Addr1[0] = 0x00;
-	pAd->ate.Addr1[1] = 0x11;
-	pAd->ate.Addr1[2] = 0x22;
-	pAd->ate.Addr1[3] = 0xAA;
-	pAd->ate.Addr1[4] = 0xBB;
-	pAd->ate.Addr1[5] = 0xCC;
-	NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	pAd->ate.bRxFer = 0;
-	pAd->ate.bQATxStart = FALSE;
-	pAd->ate.bQARxStart = FALSE;
-	pAd->ate.bFWLoading = FALSE;
-#ifdef RALINK_28xx_QA
-	//pAd->ate.Repeat = 0;
-	pAd->ate.TxStatus = 0;
-	pAd->ate.AtePid = THREAD_PID_INIT_VALUE;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-
 	pAd->CommonCfg.bWiFiTest = FALSE;
 	pAd->bPCIclkOff = FALSE;
 
@@ -3472,13 +3435,6 @@ VOID RTMPSetLED(
 	UCHAR			HighByte = 0;
 	UCHAR			LowByte;
 
-// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
-// So LED mode is not supported when ATE is running.
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	LowByte = pAd->LedCntl.field.LedMode&0x7f;
 	switch (Status)
 	{
diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h
index dd7c65e..250541b 100644
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -82,9 +82,6 @@
 
 #define OID_GEN_MACHINE_NAME               0x0001021A
 
-#ifdef RALINK_ATE
-#define RT_QUERY_ATE_TXDONE_COUNT			0x0401
-#endif // RALINK_ATE //
 #define RT_QUERY_SIGNAL_CONTEXT				0x0402
 #define RT_SET_IAPP_PID                 	0x0404
 #define RT_SET_APD_PID						0x0405
@@ -650,12 +647,6 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
 #endif
 
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-#define RTPRIV_IOCTL_ATE							(SIOCIWFIRSTPRIV + 0x08)
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
 #define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
 #define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
diff --git a/drivers/staging/rt2860/rt_ate.c b/drivers/staging/rt2860/rt_ate.c
deleted file mode 100644
index 0082f0f..0000000
--- a/drivers/staging/rt2860/rt_ate.c
+++ /dev/null
@@ -1,5947 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef RALINK_ATE
-UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00};	// 802.11 MAC Header, Type:Data, Length:24bytes
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR NUM_OF_2850_CHNL;
-
-static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
-static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
-static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
-
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable);
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd);
-
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx);
-
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index);
-
-static INT ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-static int CheckMCSValid(
-	IN UCHAR Mode,
-	IN UCHAR Mcs);
-
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pOutTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			CFACK,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit);
-
-
-static VOID SetJapanFilter(
-	IN	PRTMP_ADAPTER	pAd);
-
-/*=========================end of prototype=========================*/
-
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	WPDMA_GLO_CFG_STRUC GloCfg;
-
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	// disable DMA
-	if (GloCfg.field.TxDMABusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	WPDMA_GLO_CFG_STRUC GloCfg;
-
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	// disable DMA
-	if (GloCfg.field.RxDMABusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable)
-{
-	BOOLEAN value;
-	ULONG WaitCnt;
-	WPDMA_GLO_CFG_STRUC GloCfg;
-
-	value = Enable > 0 ? 1 : 0;
-
-	// check DMA is in busy mode.
-	WaitCnt = 0;
-	while (TxDmaBusy(pAd) || RxDmaBusy(pAd))
-	{
-		RTMPusecDelay(10);
-		if (WaitCnt++ > 100)
-			break;
-	}
-
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	// disable DMA
-	GloCfg.field.EnableTxDMA = value;
-	GloCfg.field.EnableRxDMA = value;
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);	// abort all TX rings
-	RTMPusecDelay(5000);
-
-	return;
-}
-
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR BbpData = 0;
-
-	// Soft reset, set BBP R21 bit0=1->0
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData |= 0x00000001; //set bit0=1
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData &= ~(0x00000001); //set bit0=0
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	return;
-}
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd)
-{
-	// Set RF value 1's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 2's set R3[bit2] = [1]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 3's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	return;
-}
-
-static int CheckMCSValid(
-	UCHAR Mode,
-	UCHAR Mcs)
-{
-	int i;
-	PCHAR pRateTab;
-
-	switch(Mode)
-	{
-		case 0:
-			pRateTab = CCKRateTable;
-			break;
-		case 1:
-			pRateTab = OFDMRateTable;
-			break;
-		case 2:
-		case 3:
-			pRateTab = HTMIXRateTable;
-			break;
-		default:
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode));
-			return -1;
-			break;
-	}
-
-	i = 0;
-	while(pRateTab[i] != -1)
-	{
-		if (pRateTab[i] == Mcs)
-			return 0;
-		i++;
-	}
-
-	return -1;
-}
-
-#if 1
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-	BOOLEAN bPowerReduce = FALSE;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (TxPower > 31)
-			{
-				//
-				// R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94
-				//
-				R = 31;
-				if (TxPower <= 36)
-					Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-				//
-				R = 0;
-				if (TxPower >= -6)
-					Bbp94 = BBPR94_DEFAULT + TxPower;
-			}
-			else
-			{
-				// 0 ~ 31
-				R = (ULONG) TxPower;
-				Bbp94 = BBPR94_DEFAULT;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-		}
-		else// 5.5 GHz
-		{
-			if (TxPower > 15)
-			{
-				//
-				// R3, R4 can't large than 15 (0x0F)
-				//
-				R = 15;
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0
-				//
-				// -1 ~ -7
-				ASSERT((TxPower >= -7));
-				R = (ULONG)(TxPower + 7);
-				bPowerReduce = TRUE;
-			}
-			else
-			{
-				// 0 ~ 15
-				R = (ULONG) TxPower;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __func__, TxPower, R));
-		}
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (index == 0)
-			{
-				R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-		else// 5.5GHz
-		{
-			if (bPowerReduce == FALSE)
-			{
-				if (index == 0)
-				{
-					R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-					pAd->LatchRfRegs.R3 = R;
-				}
-				else
-				{
-					R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-					pAd->LatchRfRegs.R4 = R;
-				}
-			}
-			else
-			{
-				if (index == 0)
-				{
-					R = (R << 10);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-
-					/* Clear bit 9 of R3 to reduce 7dB. */
-					pAd->LatchRfRegs.R3 = (R & (~(1 << 9)));
-				}
-				else
-				{
-					R = (R << 7);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-
-					/* Clear bit 6 of R4 to reduce 7dB. */
-					pAd->LatchRfRegs.R4 = (R & (~(1 << 6)));
-				}
-			}
-		}
-
-		RtmpRfIoWrite(pAd);
-
-		return 0;
-	}
-}
-#else// 1 //
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		// TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ?
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-	if (TxPower > 31)
-	{
-		//
-		// R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94
-		//
-		R = 31;
-		if (TxPower <= 36)
-			Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-	}
-	else if (TxPower < 0)
-	{
-		//
-		// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-		//
-		R = 0;
-		if (TxPower >= -6)
-			Bbp94 = BBPR94_DEFAULT + TxPower;
-	}
-	else
-	{
-		// 0 ~ 31
-		R = (ULONG) TxPower;
-		Bbp94 = BBPR94_DEFAULT;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-
-		if (pAd->ate.Channel <= 14)
-		{
-	if (index == 0)
-	{
-		R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-		R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-		pAd->LatchRfRegs.R3 = R;
-	}
-	else
-	{
-		R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-		R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-		pAd->LatchRfRegs.R4 = R;
-	}
-		}
-		else
-		{
-			if (index == 0)
-			{
-				R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-
-	RtmpRfIoWrite(pAd);
-
-	return 0;
-	}
-}
-#endif // 1 //
-/*
-    ==========================================================================
-    Description:
-        Set ATE operation mode to
-        0. ATESTART  = Start ATE Mode
-        1. ATESTOP   = Stop ATE Mode
-        2. TXCONT    = Continuous Transmit
-        3. TXCARR    = Transmit Carrier
-        4. TXFRAME   = Transmit Frames
-        5. RXFRAME   = Receive Frames
-#ifdef RALINK_28xx_QA
-        6. TXSTOP    = Stop Any Type of Transmition
-        7. RXSTOP    = Stop Receiving Frames
-#endif // RALINK_28xx_QA //
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-static INT	ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32			Value = 0;
-	UCHAR			BbpData;
-	UINT32			MacData = 0;
-	PTXD_STRUC		pTxD;
-	INT				index;
-	UINT			i=0, atemode;
-	PRXD_STRUC		pRxD;
-	PRTMP_TX_RING 	pTxRing = &pAd->TxRing[QID_AC_BE];
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-#ifdef	RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n"));
-
-	ATEAsicSwitchChannel(pAd);
-	AsicLockChannel(pAd, pAd->ate.Channel);
-
-	RTMPusecDelay(5000);
-
-	// read MAC_SYS_CTRL and backup MAC_SYS_CTRL value.
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
-	// Default value in BBP R22 is 0x0.
-	BbpData = 0;
-
-	// clean bit4 to stop continuous Tx production test.
-	MacData &= 0xFFFFFFEF;
-
-	if (!strcmp(arg, "ATESTART")) 		//Enter ATE mode and set Tx/Rx Idle
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
-
-		// check if we have removed the firmware
-		if (!(ATE_ON(pAd)))
-		{
-			NICEraseFirmware(pAd);
-		}
-
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode = ATE_START;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		// We should free some resource which was allocated when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-
-			if (atemode & ATE_TXCONT)
-			{
-				// No Cont. TX set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-			// Abort Tx, Rx DMA.
-			RtmpDmaEnable(pAd, 0);
-			for (i=0; i<TX_RING_SIZE; i++)
-			{
-				PNDIS_PACKET  pPacket;
-
-#ifndef RT_BIG_ENDIAN
-			    pTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-#else
-        		pDestTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-        		TxD = *pDestTxD;
-        		pTxD = &TxD;
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-				pPacket = pTxRing->Cell[i].pNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNdisPacket = NULL;
-
-				pPacket = pTxRing->Cell[i].pNextNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNextNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNextNdisPacket = NULL;
-#ifdef RT_BIG_ENDIAN
-				RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-				WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-			}
-			// Start Tx, RX DMA
-			RtmpDmaEnable(pAd, 1);
-		}
-		// reset Rx statistics.
-		pAd->ate.LastSNR0 = 0;
-		pAd->ate.LastSNR1 = 0;
-		pAd->ate.LastRssi0 = 0;
-		pAd->ate.LastRssi1 = 0;
-		pAd->ate.LastRssi2 = 0;
-		pAd->ate.AvgRssi0 = 0;
-		pAd->ate.AvgRssi1 = 0;
-		pAd->ate.AvgRssi2 = 0;
-		pAd->ate.AvgRssi0X8 = 0;
-		pAd->ate.AvgRssi1X8 = 0;
-		pAd->ate.AvgRssi2X8 = 0;
-		pAd->ate.NumOfAvgRssiSample = 0;
-
-#ifdef RALINK_28xx_QA
-		// Tx frame
-		pAd->ate.bQATxStart = FALSE;
-		pAd->ate.bQARxStart = FALSE;
-		pAd->ate.seq = 0;
-
-		// counters
-		pAd->ate.U2M = 0;
-		pAd->ate.OtherData = 0;
-		pAd->ate.Beacon = 0;
-		pAd->ate.OtherCount = 0;
-		pAd->ate.TxAc0 = 0;
-		pAd->ate.TxAc1 = 0;
-		pAd->ate.TxAc2 = 0;
-		pAd->ate.TxAc3 = 0;
-		pAd->ate.TxHCCA = 0;
-		pAd->ate.TxMgmt = 0;
-		pAd->ate.RSSI0 = 0;
-		pAd->ate.RSSI1 = 0;
-		pAd->ate.RSSI2 = 0;
-		pAd->ate.SNR0 = 0;
-		pAd->ate.SNR1 = 0;
-
-		// control
-		pAd->ate.TxDoneCount = 0;
-		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		//
-		// LinkDown() has "AsicDisableSync();" and "RTMP_BBP_IO_R/W8_BY_REG_ID();" inside.
-		//
-//      LinkDown(pAd, FALSE);
-//		AsicEnableBssSync(pAd);
-
-		netif_stop_queue(pAd->net_dev);
-
-		//
-		// If we skip "LinkDown()", we should disable protection
-		// to prevent from sending out RTS or CTS-to-self.
-		//
-		ATEDisableAsicProtect(pAd);
-		RTMPStationStop(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		/* Disable Tx */
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		/* Disable Rx */
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-	else if (!strcmp(arg, "ATESTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTOP\n"));
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back.
-
-		// Disable Tx, Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= (0xfffffff3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		pAd->ate.bFWLoading = TRUE;
-		Status = NICLoadFirmware(pAd);
-		if (Status != NDIS_STATUS_SUCCESS)
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
-			return FALSE;
-		}
-
-		pAd->ate.Mode = ATE_STOP;
-
-
-#ifdef CONFIG_STA_SUPPORT
-		//
-		// Even the firmware has been loaded,
-		// we still could use ATE_BBP_IO_READ8_BY_REG_ID().
-		// But this is not suggested.
-		//
-		BbpSoftReset(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		NICDisableInterrupt(pAd);
-
-		NICInitializeAdapter(pAd, TRUE);
-
-
-		// Reinitialize Rx Ring before Rx DMA is enabled.
-		// The nightmare of >>>RxCoherent<<< was gone !
-		for (index = 0; index < RX_RING_SIZE; index++)
-		{
-			pRxD = (PRXD_STRUC) pAd->RxRing.Cell[index].AllocVa;
-			pRxD->DDONE = 0;
-		}
-
-		// We should read EEPROM for all cases.
-		NICReadEEPROMParameters(pAd, NULL);
-		NICInitAsicFromEEPROM(pAd);
-
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-		//
-		// Enable Interrupt
-		//
-
-		//
-		// These steps are only for APAutoSelectChannel().
-		//
-#if 0
-		//pAd->bStaFifoTest = TRUE;
-		pAd->int_enable_reg = ((DELAYINTMASK)  | (RxINT|TxDataInt|TxMgmtInt)) & ~(0x03);
-		pAd->int_disable_mask = 0;
-		pAd->int_pending = 0;
-#endif
-		RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, 0xffffffff);  // clear garbage interrupts
-		NICEnableInterrupt(pAd);
-
-
-/*=========================================================================*/
-		/* restore RX_FILTR_CFG */
-#ifdef CONFIG_STA_SUPPORT
-		/* restore RX_FILTR_CFG due to that QA maybe set it to 0x3 */
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);
-#endif // CONFIG_STA_SUPPORT //
-/*=========================================================================*/
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Enable Tx, Rx DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		RTMPStationStart(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		netif_start_queue(pAd->net_dev);
-	}
-	else if (!strcmp(arg, "TXCARR"))	// Tx Carrier
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n"));
-		pAd->ate.Mode |= ATE_TXCARR;
-
-		// QA has done the following steps if it is used.
-		if (pAd->ate.bQATxStart == FALSE)
-		{
-			// Soft reset BBP.
-			BbpSoftReset(pAd);
-
-			// Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-			BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value = Value | 0x00000010;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-	}
-	else if (!strcmp(arg, "TXCONT"))	// Tx Continue
-	{
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			/* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test)
-			   and bit2(MAC TX enable) back to zero. */
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-			MacData &= 0xFFFFFFEB;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-			// set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF7F; //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-
-		/* for TxCont mode.
-		** Step 1: Send 50 packets first then wait for a moment.
-		** Step 2: Send more 50 packet then start continue mode.
-		*/
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n"));
-		// Step 1: send 50 packets first.
-		pAd->ate.Mode |= ATE_TXCONT;
-		pAd->ate.TxCount = 50;
-                /* Do it after Tx/Rx DMA is aborted. */
-//		pAd->ate.TxDoneCount = 0;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Fix can't smooth kick
-		{
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * 0x10,  &pTxRing->TxDmaIdx);
-			pTxRing->TxSwFreeIdx = pTxRing->TxDmaIdx;
-			pTxRing->TxCpuIdx = pTxRing->TxDmaIdx;
-			RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * 0x10, pTxRing->TxCpuIdx);
-		}
-
-		pAd->ate.TxDoneCount = 0;
-
-		/* Only needed if we have to send some normal frames. */
-		SetJapanFilter(pAd);
-
-		for (i = 0; (i < TX_RING_SIZE-1) && (i < pAd->ate.TxCount); i++)
-		{
-			PNDIS_PACKET pPacket;
-			UINT32 TxIdx = pTxRing->TxCpuIdx;
-
-#ifndef RT_BIG_ENDIAN
-			pTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-#else
-			pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-			TxD = *pDestTxD;
-			pTxD = &TxD;
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-			// Clean current cell.
-			pPacket = pTxRing->Cell[TxIdx].pNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNdisPacket = NULL;
-
-			pPacket = pTxRing->Cell[TxIdx].pNextNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNextNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-			WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
-			if (ATESetUpFrame(pAd, TxIdx) != 0)
-				break;
-
-			INC_RING_INDEX(pTxRing->TxCpuIdx, TX_RING_SIZE);
-		}
-
-                // Setup frame format.
-		ATESetUpFrame(pAd, pTxRing->TxCpuIdx);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif // RALINK_28xx_QA //
-
-		// kick Tx-Ring.
-		RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * RINGREG_DIFF, pAd->TxRing[QID_AC_BE].TxCpuIdx);
-
-		RTMPusecDelay(5000);
-
-
-		// Step 2: send more 50 packets then start continue mode.
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Cont. TX set BBP R22 bit7=1
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-		BbpData |= 0x00000080; //set bit7=1
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-		pAd->ate.TxCount = 50;
-
-		// Fix can't smooth kick
-		{
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * 0x10,  &pTxRing->TxDmaIdx);
-			pTxRing->TxSwFreeIdx = pTxRing->TxDmaIdx;
-			pTxRing->TxCpuIdx = pTxRing->TxDmaIdx;
-			RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * 0x10, pTxRing->TxCpuIdx);
-		}
-
-		pAd->ate.TxDoneCount = 0;
-
-		SetJapanFilter(pAd);
-
-		for (i = 0; (i < TX_RING_SIZE-1) && (i < pAd->ate.TxCount); i++)
-		{
-			PNDIS_PACKET pPacket;
-			UINT32 TxIdx = pTxRing->TxCpuIdx;
-
-#ifndef RT_BIG_ENDIAN
-			pTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-#else
-			pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-			TxD = *pDestTxD;
-			pTxD = &TxD;
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-			// clean current cell.
-			pPacket = pTxRing->Cell[TxIdx].pNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNdisPacket = NULL;
-
-			pPacket = pTxRing->Cell[TxIdx].pNextNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNextNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-			WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
-			if (ATESetUpFrame(pAd, TxIdx) != 0)
-				break;
-
-			INC_RING_INDEX(pTxRing->TxCpuIdx, TX_RING_SIZE);
-		}
-
-		ATESetUpFrame(pAd, pTxRing->TxCpuIdx);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif // RALINK_28xx_QA //
-
-		// kick Tx-Ring.
-		RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * RINGREG_DIFF, pAd->TxRing[QID_AC_BE].TxCpuIdx);
-
-		RTMPusecDelay(500);
-
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		MacData |= 0x00000010;
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-	}
-	else if (!strcmp(arg, "TXFRAME")) // Tx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=%d)\n", pAd->ate.TxCount));
-		pAd->ate.Mode |= ATE_TXFRAME;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Fix can't smooth kick
-		{
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * 0x10,  &pTxRing->TxDmaIdx);
-			pTxRing->TxSwFreeIdx = pTxRing->TxDmaIdx;
-			pTxRing->TxCpuIdx = pTxRing->TxDmaIdx;
-			RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * 0x10, pTxRing->TxCpuIdx);
-		}
-
-		pAd->ate.TxDoneCount = 0;
-
-		SetJapanFilter(pAd);
-
-		for (i = 0; (i < TX_RING_SIZE-1) && (i < pAd->ate.TxCount); i++)
-		{
-			PNDIS_PACKET pPacket;
-			UINT32 TxIdx = pTxRing->TxCpuIdx;
-
-#ifndef RT_BIG_ENDIAN
-			pTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-#else
-			pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-			TxD = *pDestTxD;
-			pTxD = &TxD;
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-			// Clean current cell.
-			pPacket = pTxRing->Cell[TxIdx].pNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNdisPacket = NULL;
-
-			pPacket = pTxRing->Cell[TxIdx].pNextNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNextNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-			WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
-			if (ATESetUpFrame(pAd, TxIdx) != 0)
-				break;
-
-			INC_RING_INDEX(pTxRing->TxCpuIdx, TX_RING_SIZE);
-
-		}
-
-		ATESetUpFrame(pAd, pTxRing->TxCpuIdx);
-
-		// Start Tx, Rx DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#ifdef RALINK_28xx_QA
-		// add this for LoopBack mode
-		if (pAd->ate.bQARxStart == FALSE)
-		{
-			// Disable Rx
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value &= ~(1 << 3);
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#else
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#endif // RALINK_28xx_QA //
-
-		RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * RINGREG_DIFF, &pAd->TxRing[QID_AC_BE].TxDmaIdx);
-		// kick Tx-Ring.
-		RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * RINGREG_DIFF, pAd->TxRing[QID_AC_BE].TxCpuIdx);
-
-		pAd->RalinkCounters.KickTxCount++;
-	}
-#ifdef RALINK_28xx_QA
-	else if (!strcmp(arg, "TXSTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n"));
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode &= ATE_TXSTOP;
-		pAd->ate.bQATxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-		if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		// We should free some resource which allocate when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-
-			PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-
-			if (atemode & ATE_TXCONT)
-			{
-				// No Cont. TX set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-
-			// Abort Tx, Rx DMA.
-			RtmpDmaEnable(pAd, 0);
-			for (i=0; i<TX_RING_SIZE; i++)
-			{
-				PNDIS_PACKET  pPacket;
-
-#ifndef RT_BIG_ENDIAN
-			    pTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-#else
-        		pDestTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-        		TxD = *pDestTxD;
-        		pTxD = &TxD;
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-				pPacket = pTxRing->Cell[i].pNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNdisPacket = NULL;
-
-				pPacket = pTxRing->Cell[i].pNextNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNextNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNextNdisPacket = NULL;
-#ifdef RT_BIG_ENDIAN
-				RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-				WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-			}
-			// Enable Tx, Rx DMA
-			RtmpDmaEnable(pAd, 1);
-
-		}
-
-		// control
-//		pAd->ate.TxDoneCount = 0;
-		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-	else if (!strcmp(arg, "RXSTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n"));
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode &= ATE_RXSTOP;
-		pAd->ate.bQARxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-		if (atemode & ATE_TXCARR)
-		{
-			;
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			;
-		}
-
-		// We should free some resource which was allocated when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			if (atemode & ATE_TXCONT)
-			{
-				;
-			}
-		}
-
-		// control
-//		pAd->ate.TxDoneCount = 0;
-//		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-#endif // RALINK_28xx_QA //
-	else if (!strcmp(arg, "RXFRAME")) // Rx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n"));
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		pAd->ate.Mode |= ATE_RXFRAME;
-
-		// Disable Tx of MAC block.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Enable Rx of MAC block.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n"));
-		return FALSE;
-	}
-	RTMPusecDelay(5000);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n"));
-
-	return TRUE;
-}
-/*                                                           */
-/*                                                           */
-/*=======================End of RT2860=======================*/
-
-
-/*======================Start of RT2870======================*/
-/*                                                           */
-/*                                                           */
-
-
-INT	Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	if (ATECmdHandler(pAd, arg))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n"));
-
-
-		return TRUE;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n"));
-		return FALSE;
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR1=DA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr3[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0],
-		pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR3=SA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr2[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0],
-		pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR2=BSSID for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr1[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n",	pAd->ate.Addr1[0],
-		pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Channel
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR channel;
-
-	channel = simple_strtol(arg, 0, 10);
-
-	if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n"));
-		return FALSE;
-	}
-	pAd->ate.Channel = channel;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power0
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-		if ((TxPower > 31) || (TxPower < 0))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-	else// 5.5GHz
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower0 = TxPower;
-	ATETxPwrHandler(pAd, 0);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power1
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-	if ((TxPower > 31) || (TxPower < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-		return FALSE;
-	}
-	}
-	else
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower1 = TxPower;
-	ATETxPwrHandler(pAd, 1);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 2) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.TxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Rx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 3) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.RxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF frequence offset
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR RFFreqOffset;
-	ULONG R4;
-
-	RFFreqOffset = simple_strtol(arg, 0, 10);
-
-	if(RFFreqOffset >= 64)
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n"));
-		return FALSE;
-	}
-
-	pAd->ate.RFFreqOffset = RFFreqOffset;
-	R4 = pAd->ate.RFFreqOffset << 15;		// shift TX power control to correct RF register bit position
-	R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000)));
-	pAd->LatchRfRegs.R4 = R4;
-
-	RtmpRfIoWrite(pAd);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF BW
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	int i;
-	UCHAR value = 0;
-	UCHAR BBPCurrentBW;
-
-	BBPCurrentBW = simple_strtol(arg, 0, 10);
-
-	if(BBPCurrentBW == 0)
-		pAd->ate.TxWI.BW = BW_20;
-	else
-		pAd->ate.TxWI.BW = BW_40;
-
-	if(pAd->ate.TxWI.BW == BW_20)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
- 		for (i=0; i<5; i++)
- 		{
-				if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff)
- 			{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]);
- 				RTMPusecDelay(5000);
- 			}
- 		}
-		}
-
-		//Set BBP R4 bit[4:3]=0:0
- 		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- 		value &= (~0x18);
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-  		//Set BBP R66=0x3C
- 		value = 0x3C;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0B
-		//to improve Rx sensitivity.
-		value = 0x0B;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x16
-		value = 0x16;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x08
-		value = 0x08;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x11
-		value = 0x11;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-	    // If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1
-	    // (Japan filter coefficients)
-	    // This segment of code will only works when ATETXMODE and ATECHANNEL
-	    // were set to MODE_CCK and 14 respectively before ATETXBW is set to 0.
-	    //=====================================================================
-		if (pAd->ate.Channel == 14)
-		{
-			int TxMode = pAd->ate.TxWI.PHYMODE;
-			if (TxMode == MODE_CCK)
-			{
-				// when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1
- 				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-				value |= 0x20; //set bit5=1
- 				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-			}
-		}
-
-	    //=====================================================================
-		// If bandwidth != 40M, RF Reg4 bit 21 = 0.
-		pAd->LatchRfRegs.R4 &= ~0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-	else if(pAd->ate.TxWI.BW == BW_40)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-#ifdef DOT11_N_SUPPORT
-			if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7))
-			{
-    			value = 0x28;
-    			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value);
-			}
-#endif // DOT11_N_SUPPORT //
-		}
-
-		//Set BBP R4 bit[4:3]=1:0
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-		value &= (~0x18);
-		value |= 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-		//Set BBP R66=0x3C
-		value = 0x3C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0C
-		//to improve Rx sensitivity.
-		value = 0x0C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x1A
-		value = 0x1A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x0A
-		value = 0x0A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x16
-		value = 0x16;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-		// If bandwidth = 40M, set RF Reg4 bit 21 = 1.
-		pAd->LatchRfRegs.R4 |= 0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame length
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxLength = simple_strtol(arg, 0, 10);
-
-	if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */)))
-	{
-		pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */);
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */)));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame count
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxCount = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame MCS
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR MCS;
-	int result;
-
-	MCS = simple_strtol(arg, 0, 10);
-	result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS);
-
-	if (result != -1)
-	{
-		pAd->ate.TxWI.MCS = (UCHAR)MCS;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame Mode
-        0: MODE_CCK
-        1: MODE_OFDM
-        2: MODE_HTMIX
-        3: MODE_HTGREENFIELD
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.PHYMODE > 3)
-	{
-		pAd->ate.TxWI.PHYMODE = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n"));
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame GI
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.ShortGI > 1)
-	{
-		pAd->ate.TxWI.ShortGI = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-    ==========================================================================
- */
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.bRxFer = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.bRxFer == 1)
-	{
-		pAd->ate.RxCntPerSec = 0;
-		pAd->ate.RxTotalCnt = 0;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1);
-	ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2);
-	ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3);
-	ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R1 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R2 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R3 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R4 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Load and Write EEPROM from a binary file prepared in advance.
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN		    ret = FALSE;
-	PUCHAR			src = EEPROM_BIN_FILE_NAME;
-	struct file		*srcf;
-	INT32 			retval, orgfsuid, orgfsgid;
-   	mm_segment_t	orgfs;
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	UINT32			FileLength = 0;
-	UINT32 			value = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __func__, value));
-
-	if (value > 0)
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* save uid and gid used for filesystem access.
-	    ** set user and group to 0 (root)
-	    */
-		orgfsuid = current->fsuid;
-		orgfsgid = current->fsgid;
-		/* as root */
-		current->fsuid = current->fsgid = 0;
-    	orgfs = get_fs();
-    	set_fs(KERNEL_DS);
-
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				ate_print("%s - Error %ld opening %s\n", __func__, -PTR_ERR(srcf), src);
-				break;
-			}
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				ate_print("%s - %s does not have a read method\n", __func__, src);
-				break;
-			}
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  (PUCHAR)WriteEEPROM,
-										  EEPROM_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != EEPROM_SIZE)
-			{
-				ate_print("%s: error file length (=%d) in e2p.bin\n",
-					   __func__, FileLength);
-				break;
-			}
-			else
-			{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-				ret = TRUE;
-			}
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-		{
-				;
-		}
-		else
-		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src));
-
-			}
-		}
-
-		/* restore */
-		set_fs(orgfs);
-		current->fsuid = orgfsuid;
-		current->fsgid = orgfsgid;
-	}
-    ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __func__, ret));
-
-    return ret;
-
-}
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT buffer[EEPROM_SIZE/2];
-	USHORT *p;
-	int i;
-
-	rt_ee_read_all(pAd, (USHORT *)buffer);
-	p = buffer;
-	for (i = 0; i < (EEPROM_SIZE/2); i++)
-	{
-		ate_print("%4.4x ", *p);
-		if (((i+1) % 16) == 0)
-			ate_print("\n");
-		p++;
-	}
-	return TRUE;
-}
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("Mode=%d\n", pAd->ate.Mode);
-	ate_print("TxPower0=%d\n", pAd->ate.TxPower0);
-	ate_print("TxPower1=%d\n", pAd->ate.TxPower1);
-	ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel);
-	ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel);
-	ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW);
-	ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI);
-	ate_print("MCS=%d\n", pAd->ate.TxWI.MCS);
-	ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE);
-	ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]);
-	ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]);
-	ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]);
-	ate_print("Channel=%d\n", pAd->ate.Channel);
-	ate_print("TxLength=%d\n", pAd->ate.TxLength);
-	ate_print("TxCount=%u\n", pAd->ate.TxCount);
-	ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset);
-	ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n");
-	return TRUE;
-}
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n");
-	ate_print("ATEDA\n");
-	ate_print("ATESA\n");
-	ate_print("ATEBSSID\n");
-	ate_print("ATECHANNEL, range:0~14(unless A band !)\n");
-	ate_print("ATETXPOW0, set power level of antenna 1.\n");
-	ate_print("ATETXPOW1, set power level of antenna 2.\n");
-	ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n");
-	ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n");
-	ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n");
-	ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n");
-	ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */));
-	ate_print("ATETXCNT, set how many frame going to transmit.\n");
-	ate_print("ATETXMCS, set MCS, reference to rate table.\n");
-	ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n");
-	ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n");
-	ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n");
-	ate_print("ATERRF, show all RF registers.\n");
-	ate_print("ATEWRF1, set RF1 register.\n");
-	ate_print("ATEWRF2, set RF2 register.\n");
-	ate_print("ATEWRF3, set RF3 register.\n");
-	ate_print("ATEWRF4, set RF4 register.\n");
-	ate_print("ATELDE2P, load EEPROM from .bin file.\n");
-	ate_print("ATERE2P, display all EEPROM content.\n");
-	ate_print("ATESHOW, display all parameters of ATE.\n");
-	ate_print("ATEHELP, online help.\n");
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	AsicSwitchChannel() dedicated for ATE.
-
-    ==========================================================================
-*/
-VOID ATEAsicSwitchChannel(
-    IN PRTMP_ADAPTER pAd)
-{
-	UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0;
-	CHAR TxPwer = 0, TxPwer2 = 0;
-	UCHAR index, BbpValue = 0, R66 = 0x30;
-	RTMP_RF_REGS *RFRegTable;
-	UCHAR Channel;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		if (pAd->ate.Channel != pAd->LatchRfRegs.Channel)
-		{
-			pAd->ate.Channel = pAd->LatchRfRegs.Channel;
-		}
-		return;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	Channel = pAd->ate.Channel;
-
-	// Select antenna
-	AsicAntennaSelect(pAd, Channel);
-
-	// fill Tx power value
-	TxPwer = pAd->ate.TxPower0;
-	TxPwer2 = pAd->ate.TxPower1;
-
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		/* But only 2850 and 2750 support 5.5GHz band... */
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								R2 |= 0x40;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								/* Only enable two Antenna to receive. */
-								BbpValue |= 0x08;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-
-					if (pAd->Antenna.field.TxPath == 2)
-					{
-						if (pAd->ate.TxAntennaSel == 1)
-						{
-							R2 |= 0x4000;	// If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;		//11100111B
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else if (pAd->ate.TxAntennaSel == 2)
-						{
-							R2 |= 0x8000;	// If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x08;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else
-						{
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x10;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-					}
-					if (pAd->Antenna.field.RxPath == 3)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 3:
-								R2 |= 0x30000;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x02;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x10;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-
-					if (Channel > 14)
-					{
-						// initialize R3, R4
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff);
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15);
-
-                        // According the Rory's suggestion to solve the middle range issue.
-						// 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-						// R3
-						if ((TxPwer >= -7) && (TxPwer < 0))
-						{
-							TxPwer = (7+TxPwer);
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer));
-						}
-						else
-						{
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10) | (1 << 9);
-						}
-
-						// R4
-						if ((TxPwer2 >= -7) && (TxPwer2 < 0))
-						{
-							TxPwer2 = (7+TxPwer2);
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
-						}
-						else
-						{
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7) | (1 << 6);
-						}
-					}
-					else
-					{
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1
-					}
-
-					// Based on BBP current mode before changing RF channel.
-					if (pAd->ate.TxWI.BW == BW_40)
-					{
-						R4 |=0x200000;
-					}
-
-					// Update variables
-					pAd->LatchRfRegs.Channel = Channel;
-					pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
-					pAd->LatchRfRegs.R2 = R2;
-					pAd->LatchRfRegs.R3 = R3;
-					pAd->LatchRfRegs.R4 = R4;
-
-					RtmpRfIoWrite(pAd);
-
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-
-	// Change BBP setting during switch from a->g, g->a
-	if (Channel <= 14)
-	{
-	    ULONG	TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-
-		/* For 1T/2R chip only... */
-	    if (pAd->NicConfig2.field.ExternalLNAForG)
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-	    }
-	    else
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
-	    }
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x04);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-		}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-	else
-	{
-	    ULONG	TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue);
-		ASSERT((BbpValue == 0x04));
-
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x02);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-	    }
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-
-    // R66 should be set according to Channel and use 20MHz when scanning
-	if (Channel <= 14)
-	{
-		// BG band
-		R66 = 0x2E + GET_LNA_GAIN(pAd);
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-	}
-	else
-	{
-		// 5.5 GHz band
-		if (pAd->ate.TxWI.BW == BW_20)
-		{
-			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
-    		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-		else
-		{
-			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-	}
-
-	//
-	// On 11A, We should delay and wait RF/BBP to be stable
-	// and the appropriate time should be 1000 micro seconds
-	// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-	//
-	RTMPusecDelay(1000);
-
-	if (Channel > 14)
-	{
-		// When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not.
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  (R3 & 0x00003e00) >> 9,
-								  (R4 & 0x000007c0) >> 6,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-    }
-}
-
-//
-// In fact, no one will call this routine so far !
-//
-/*
-	==========================================================================
-	Description:
-		Gives CCK TX rate 2 more dB TX power.
-		This routine works only in ATE mode.
-
-		calculate desired Tx power in RF R3.Tx0~5,	should consider -
-		0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
-		1. TxPowerPercentage
-		2. auto calibration based on TSSI feedback
-		3. extra 2 db for CCK
-		4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
-	NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
-		it should be called AFTER MlmeDynamicTxRateSwitching()
-	==========================================================================
- */
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT			i, j;
-	CHAR		DeltaPwr = 0;
-	BOOLEAN		bAutoTxAgc = FALSE;
-	UCHAR		TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
-	UCHAR		BbpR49 = 0, idx;
-	PCHAR		pTxAgcCompensate;
-	ULONG		TxPwr[5];
-	CHAR		Value;
-
-	/* no one calls this procedure so far */
-	if (pAd->ate.TxWI.BW == BW_40)
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
-		}
-	}
-
-	// TX power compensation for temperature variation based on TSSI.
-	// Do it per 4 seconds.
-	if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			/* bg channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			TssiRef            = pAd->TssiRefG;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryG[0];
-			TxAgcStep          = pAd->TxAgcStepG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			/* a channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			TssiRef            = pAd->TssiRefA;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryA[0];
-			TxAgcStep          = pAd->TxAgcStepA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-		{
-			/* BbpR49 is unsigned char */
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
-			/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
-			/* compensate: +4     +3   +2   +1    0   -1   -2   -3   -4 * steps */
-			/* step value is defined in pAd->TxAgcStepG for tx power value */
-
-			/* [4]+1+[4]   p4     p3   p2   p1   o1   m1   m2   m3   m4 */
-			/* ex:         0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-			   above value are examined in mass factory production */
-			/*             [4]    [3]  [2]  [1]  [0]  [1]  [2]  [3]  [4] */
-
-			/* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */
-			/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
-			/* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */
-
-			if (BbpR49 > pTssiMinusBoundary[1])
-			{
-				// Reading is larger than the reference value.
-				// Check for how large we need to decrease the Tx power.
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
-						break;
-				}
-				// The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//				if (R3 > (ULONG) (TxAgcStep * (idx-1)))
-					*pTxAgcCompensate = -(TxAgcStep * (idx-1));
-//				else
-//					*pTxAgcCompensate = -((UCHAR)R3);
-
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else if (BbpR49 < pTssiPlusBoundary[1])
-			{
-				// Reading is smaller than the reference value
-				// check for how large we need to increase the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
-						break;
-				}
-				// The index is the step we should increase, idx = 0 means there is nothing to compensate
-				*pTxAgcCompensate = TxAgcStep * (idx-1);
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else
-			{
-				*pTxAgcCompensate = 0;
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("   Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, 0));
-			}
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-			DeltaPwr += (*pTxAgcCompensate);
-	}
-
-	/* calculate delta power based on the percentage specified from UI */
-	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-	// We lower TX power here according to the percentage specified from UI
-	if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)       // AUTO TX POWER control
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 90)  // 91 ~ 100% & AUTO, treat as 100% in terms of mW
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 60)  // 61 ~ 90%, treat as 75% in terms of mW
-	{
-		DeltaPwr -= 1;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 30)  // 31 ~ 60%, treat as 50% in terms of mW
-	{
-		DeltaPwr -= 3;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 15)  // 16 ~ 30%, treat as 25% in terms of mW
-	{
-		DeltaPwr -= 6;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 9)   // 10 ~ 15%, treat as 12.5% in terms of mW
-	{
-		DeltaPwr -= 9;
-	}
-	else                                           // 0 ~ 9 %, treat as MIN(~3%) in terms of mW
-	{
-		DeltaPwr -= 12;
-	}
-
-	/* reset different new tx power for different TX rate */
-	for(i=0; i<5; i++)
-	{
-		if (TxPwr[i] != 0xffffffff)
-		{
-			for (j=0; j<8; j++)
-			{
-				Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
-				if ((Value + DeltaPwr) < 0)
-				{
-					Value = 0; /* min */
-				}
-				else if ((Value + DeltaPwr) > 0xF)
-				{
-					Value = 0xF; /* max */
-				}
-				else
-				{
-					Value += DeltaPwr; /* temperature compensation */
-				}
-
-				/* fill new value to CSR offset */
-				TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-			}
-
-			/* write tx power value to CSR */
-			/* TX_PWR_CFG_0 (8 tx rate) for	TX power for OFDM 12M/18M
-											TX power for OFDM 6M/9M
-											TX power for CCK5.5M/11M
-											TX power for CCK1M/2M */
-			/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-
-
-		}
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Write TxWI for ATE mode.
-
-	Return Value:
-		None
-	========================================================================
-*/
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pOutTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			CFACK,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit)
-{
-	TXWI_STRUC 		TxWI;
-	PTXWI_STRUC 	pTxWI;
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	NdisZeroMemory(&TxWI, TXWI_SIZE);
-	pTxWI = &TxWI;
-
-	pTxWI->FRAG= FRAG;
-
-	pTxWI->CFACK = CFACK;
-	pTxWI->TS= InsTimestamp;
-	pTxWI->AMPDU = AMPDU;
-	pTxWI->ACK = Ack;
-	pTxWI->txop= Txopmode;
-
-	pTxWI->NSEQ = NSeq;
-	// John tune the performace with Intel Client in 20 MHz performance
-	if( BASize >7 )
-		BASize =7;
-
-	pTxWI->BAWinSize = BASize;
-	pTxWI->WirelessCliID = WCID;
-	pTxWI->MPDUtotalByteCount = Length;
-	pTxWI->PacketId = PID;
-
-	// If CCK or OFDM, BW must be 20
-	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-	pTxWI->ShortGI = pTransmit->field.ShortGI;
-	pTxWI->STBC = pTransmit->field.STBC;
-
-	pTxWI->MCS = pTransmit->field.MCS;
-	pTxWI->PHYMODE = pTransmit->field.MODE;
-	pTxWI->CFACK = CfAck;
-	pTxWI->MIMOps = 0;
-	pTxWI->MpduDensity = 0;
-
-	pTxWI->PacketId = pTxWI->MCS;
-	NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
-
-        return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Disable protection for ATE.
-	========================================================================
-*/
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	PROT_CFG_STRUC	ProtCfg, ProtCfg4;
-	UINT32 Protect[6];
-	USHORT			offset;
-	UCHAR			i;
-	UINT32 MacReg = 0;
-
-	// Config ASIC RTS threshold register
-	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
-	MacReg &= 0xFF0000FF;
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
-	// Initial common protection settings
-	RTMPZeroMemory(Protect, sizeof(Protect));
-	ProtCfg4.word = 0;
-	ProtCfg.word = 0;
-	ProtCfg.field.TxopAllowGF40 = 1;
-	ProtCfg.field.TxopAllowGF20 = 1;
-	ProtCfg.field.TxopAllowMM40 = 1;
-	ProtCfg.field.TxopAllowMM20 = 1;
-	ProtCfg.field.TxopAllowOfdm = 1;
-	ProtCfg.field.TxopAllowCck = 1;
-	ProtCfg.field.RTSThEn = 1;
-	ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
-	// Handle legacy(B/G) protection
-	ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-	ProtCfg.field.ProtectCtrl = 0;
-	Protect[0] = ProtCfg.word;
-	Protect[1] = ProtCfg.word;
-
-	// NO PROTECT
-	// 1.All STAs in the BSS are 20/40 MHz HT
-	// 2. in ai 20/40MHz BSS
-	// 3. all STAs are 20MHz in a 20MHz BSS
-	// Pure HT. no protection.
-
-	// MM20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[2] = 0x01744004;
-
-	// MM40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[3] = 0x03f44084;
-
-	// CF20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[4] = 0x01744004;
-
-	// CF40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[5] = 0x03f44084;
-
-	pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-
-	offset = CCK_PROT_CFG;
-	for (i = 0;i < 6;i++)
-		RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-
-}
-
-
-/* There are two ways to convert Rssi */
-#if 1
-//
-// The way used with GET_LNA_GAIN().
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR	Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-	LNAGain = GET_LNA_GAIN(pAd);
-	if (pAd->LatchRfRegs.Channel > 14)
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-	}
-	else
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-	}
-
-	return (-12 - RssiOffset - LNAGain - Rssi);
-}
-#else
-//
-// The way originally used in ATE of rt2860ap.
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR			Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-    if (pAd->LatchRfRegs.Channel > 14)
-    {
-        LNAGain = pAd->ALNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-    }
-    else
-    {
-        LNAGain = pAd->BLNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-    }
-
-    return (-32 - RssiOffset + LNAGain - Rssi);
-}
-#endif /* end of #if 1 */
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set Japan filter coefficients if needed.
-	Note:
-		This routine should only be called when
-		entering TXFRAME mode or TXCONT mode.
-
-	========================================================================
-*/
-static VOID SetJapanFilter(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	UCHAR			BbpData = 0;
-
-	//
-	// If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1
-	// (Japan Tx filter coefficients)when (TXFRAME or TXCONT).
-	//
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData);
-
-    if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20))
-    {
-        BbpData |= 0x20;    // turn on
-        ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n"));
-    }
-    else
-    {
-		BbpData &= 0xdf;    // turn off
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n"));
-    }
-
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData);
-}
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI)
-{
-	/* There are two ways to collect RSSI. */
-#if 1
-	//pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
-	if (pRxWI->RSSI0 != 0)
-	{
-		pAd->ate.LastRssi0	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-		pAd->ate.AvgRssi0X8	= (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-		pAd->ate.AvgRssi0  	= pAd->ate.AvgRssi0X8 >> 3;
-	}
-	if (pRxWI->RSSI1 != 0)
-	{
-		pAd->ate.LastRssi1	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-		pAd->ate.AvgRssi1X8	= (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-		pAd->ate.AvgRssi1	= pAd->ate.AvgRssi1X8 >> 3;
-	}
-	if (pRxWI->RSSI2 != 0)
-	{
-		pAd->ate.LastRssi2	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-		pAd->ate.AvgRssi2X8	= (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-		pAd->ate.AvgRssi2	= pAd->ate.AvgRssi2X8 >> 3;
-	}
-
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ?
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ?
-
-	pAd->ate.NumOfAvgRssiSample ++;
-#else
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);
-	pAd->ate.RxCntPerSec++;
-	pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-	pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-	pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-	pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-	pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
-	pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-	pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
-	pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-	pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
-	pAd->ate.NumOfAvgRssiSample ++;
-#endif
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd)
-{
-//	BOOLEAN       Cancelled;
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n"));
-
-#if 0
-	RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,      &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,    &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,   &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,       &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,     &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,       &Cancelled);
-#endif
-	// For rx statistics, we need to keep this timer running.
-//	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,      &Cancelled);
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n"));
-}
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd)
-{
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
-epAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-	//
-	// We did not cancel this timer when entering ATE mode.
-	//
-//	RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-		Setup Frame format.
-	NOTE:
-		This routine should only be used in ATE mode.
-	==========================================================================
- */
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx)
-{
-	UINT j;
-	PTXD_STRUC pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
-	PNDIS_PACKET pPacket;
-	PUCHAR pDest;
-	PVOID AllocVa;
-	NDIS_PHYSICAL_ADDRESS AllocPa;
-	HTTRANSMIT_SETTING	TxHTPhyMode;
-
-	PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-	PTXWI_STRUC pTxWI = (PTXWI_STRUC) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-	PUCHAR pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-
-#ifdef RALINK_28xx_QA
-	PHEADER_802_11	pHeader80211;
-#endif // RALINK_28xx_QA //
-
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		// always use QID_AC_BE and FIFO_EDCA
-
-		// fill TxWI
-		TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-		TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-		TxHTPhyMode.field.STBC = 0;
-		TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-		TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-		ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.CFACK, pAd->ate.TxWI.TS,  pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ,
-			pAd->ate.TxWI.BAWinSize, 0, pAd->ate.TxWI.MPDUtotalByteCount, pAd->ate.TxWI.PacketId, 0, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, &TxHTPhyMode);
-	}
-	else
-	{
-		TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-		TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-		TxHTPhyMode.field.STBC = 0;
-		TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-		TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-		ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE,  FALSE, FALSE, FALSE,
-			4, 0, pAd->ate.TxLength, 0, 0, 0, IFS_HTTXOP, FALSE, &TxHTPhyMode);
-	}
-
-	// fill 802.11 header.
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE, pAd->ate.Header, pAd->ate.HLen);
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE, TemplateFrame, LENGTH_802_11);
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE+4, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE+10, pAd->ate.Addr2, ETH_LENGTH_OF_ADDRESS);
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE+16, pAd->ate.Addr3, ETH_LENGTH_OF_ADDRESS);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA)+TXWI_SIZE), DIR_READ, FALSE);
-#endif // RT_BIG_ENDIAN //
-
-	/* alloc buffer for payload */
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		/* Why not use RTMP_AllocateTxPacketBuffer() instead of RTMP_AllocateRxPacketBuffer()? */
-		pPacket = RTMP_AllocateRxPacketBuffer(pAd, pAd->ate.DLen + 0x100, FALSE, &AllocVa, &AllocPa);
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		/* Why not use RTMP_AllocateTxPacketBuffer() instead of RTMP_AllocateRxPacketBuffer()? */
-		pPacket = RTMP_AllocateRxPacketBuffer(pAd, pAd->ate.TxLength, FALSE, &AllocVa, &AllocPa);
-	}
-
-	if (pPacket == NULL)
-	{
-		pAd->ate.TxCount = 0;
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("%s fail to alloc packet space.\n", __func__));
-		return -1;
-	}
-	pTxRing->Cell[TxIdx].pNextNdisPacket = pPacket;
-
-	pDest = (PUCHAR) AllocVa;
-
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		RTPKT_TO_OSPKT(pPacket)->len = pAd->ate.DLen;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		RTPKT_TO_OSPKT(pPacket)->len = pAd->ate.TxLength - LENGTH_802_11;
-	}
-
-	// Prepare frame payload
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		// copy pattern
-		if ((pAd->ate.PLen != 0))
-		{
-			int j;
-
-			for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen)
-			{
-				memcpy(RTPKT_TO_OSPKT(pPacket)->data + j, pAd->ate.Pattern, pAd->ate.PLen);
-			}
-		}
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		for(j = 0; j < RTPKT_TO_OSPKT(pPacket)->len; j++)
-			pDest[j] = 0xA5;
-	}
-
-	//
-	// build Tx Descriptor
-	//
-#ifndef RT_BIG_ENDIAN
-	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-#else
-    pDestTxD  = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-    TxD = *pDestTxD;
-    pTxD = &TxD;
-#endif // !RT_BIG_ENDIAN //
-
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		// prepare TxD
-		NdisZeroMemory(pTxD, TXD_SIZE);
-		RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-		// build TX DESC
-		pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-		pTxD->SDLen0 = TXWI_SIZE + pAd->ate.HLen;
-		pTxD->LastSec0 = 0;
-		pTxD->SDPtr1 = AllocPa;
-		pTxD->SDLen1 = RTPKT_TO_OSPKT(pPacket)->len;
-		pTxD->LastSec1 = 1;
-
-		pDest = (PUCHAR)pTxWI;
-		pDest += TXWI_SIZE;
-		pHeader80211 = (PHEADER_802_11)pDest;
-
-		// modify sequence number....
-		if (pAd->ate.TxDoneCount == 0)
-		{
-			pAd->ate.seq = pHeader80211->Sequence;
-		}
-		else
-			pHeader80211->Sequence = ++pAd->ate.seq;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		NdisZeroMemory(pTxD, TXD_SIZE);
-		RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-		// build TX DESC
-		pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow (pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-		pTxD->SDLen0 = TXWI_SIZE + LENGTH_802_11;
-		pTxD->LastSec0 = 0;
-		pTxD->SDPtr1 = AllocPa;
-		pTxD->SDLen1 = RTPKT_TO_OSPKT(pPacket)->len;
-		pTxD->LastSec1 = 1;
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-	RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA)+TXWI_SIZE), DIR_WRITE, FALSE);
-    RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif // RT_BIG_ENDIAN //
-	return 0;
-}
-/*                                                           */
-/*                                                           */
-/*=======================End of RT2860=======================*/
-
-
-VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		RT28xx_EEPROM_READ16(pAd, i*2, value);
-		Data[i] = value;
-		i++;
-	}
-}
-
-VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		value = Data[i];
-		RT28xx_EEPROM_WRITE16(pAd, i*2, value);
-		i ++;
-	}
-}
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER			pAd,
-	IN PRXWI_STRUC				pRxWI,
-	IN PRT28XX_RXD_STRUC		pRxD,
-	IN PHEADER_802_11			pHeader)
-{
-	// update counter first
-	if (pHeader != NULL)
-	{
-		if (pHeader->FC.Type == BTYPE_DATA)
-		{
-			if (pRxD->U2M)
-				pAd->ate.U2M++;
-			else
-				pAd->ate.OtherData++;
-		}
-		else if (pHeader->FC.Type == BTYPE_MGMT)
-		{
-			if (pHeader->FC.SubType == SUBTYPE_BEACON)
-				pAd->ate.Beacon++;
-			else
-				pAd->ate.OtherCount++;
-		}
-		else if (pHeader->FC.Type == BTYPE_CNTL)
-		{
-			pAd->ate.OtherCount++;
-		}
-	}
-	pAd->ate.RSSI0 = pRxWI->RSSI0;
-	pAd->ate.RSSI1 = pRxWI->RSSI1;
-	pAd->ate.RSSI2 = pRxWI->RSSI2;
-	pAd->ate.SNR0 = pRxWI->SNR0;
-	pAd->ate.SNR1 = pRxWI->SNR1;
-}
-
-/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */
-#define RACFG_CMD_RF_WRITE_ALL		0x0000
-#define RACFG_CMD_E2PROM_READ16		0x0001
-#define RACFG_CMD_E2PROM_WRITE16	0x0002
-#define RACFG_CMD_E2PROM_READ_ALL	0x0003
-#define RACFG_CMD_E2PROM_WRITE_ALL	0x0004
-#define RACFG_CMD_IO_READ			0x0005
-#define RACFG_CMD_IO_WRITE			0x0006
-#define RACFG_CMD_IO_READ_BULK		0x0007
-#define RACFG_CMD_BBP_READ8			0x0008
-#define RACFG_CMD_BBP_WRITE8		0x0009
-#define RACFG_CMD_BBP_READ_ALL		0x000a
-#define RACFG_CMD_GET_COUNTER		0x000b
-#define RACFG_CMD_CLEAR_COUNTER		0x000c
-
-#define RACFG_CMD_RSV1				0x000d
-#define RACFG_CMD_RSV2				0x000e
-#define RACFG_CMD_RSV3				0x000f
-
-#define RACFG_CMD_TX_START			0x0010
-#define RACFG_CMD_GET_TX_STATUS		0x0011
-#define RACFG_CMD_TX_STOP			0x0012
-#define RACFG_CMD_RX_START			0x0013
-#define RACFG_CMD_RX_STOP			0x0014
-#define RACFG_CMD_GET_NOISE_LEVEL	0x0015
-
-#define RACFG_CMD_ATE_START			0x0080
-#define RACFG_CMD_ATE_STOP			0x0081
-
-#define RACFG_CMD_ATE_START_TX_CARRIER		0x0100
-#define RACFG_CMD_ATE_START_TX_CONT			0x0101
-#define RACFG_CMD_ATE_START_TX_FRAME		0x0102
-#define RACFG_CMD_ATE_SET_BW	            0x0103
-#define RACFG_CMD_ATE_SET_TX_POWER0	        0x0104
-#define RACFG_CMD_ATE_SET_TX_POWER1			0x0105
-#define RACFG_CMD_ATE_SET_FREQ_OFFSET		0x0106
-#define RACFG_CMD_ATE_GET_STATISTICS		0x0107
-#define RACFG_CMD_ATE_RESET_COUNTER			0x0108
-#define RACFG_CMD_ATE_SEL_TX_ANTENNA		0x0109
-#define RACFG_CMD_ATE_SEL_RX_ANTENNA		0x010a
-#define RACFG_CMD_ATE_SET_PREAMBLE			0x010b
-#define RACFG_CMD_ATE_SET_CHANNEL			0x010c
-#define RACFG_CMD_ATE_SET_ADDR1				0x010d
-#define RACFG_CMD_ATE_SET_ADDR2				0x010e
-#define RACFG_CMD_ATE_SET_ADDR3				0x010f
-#define RACFG_CMD_ATE_SET_RATE				0x0110
-#define RACFG_CMD_ATE_SET_TX_FRAME_LEN		0x0111
-#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT	0x0112
-#define RACFG_CMD_ATE_START_RX_FRAME		0x0113
-#define RACFG_CMD_ATE_E2PROM_READ_BULK	0x0114
-#define RACFG_CMD_ATE_E2PROM_WRITE_BULK	0x0115
-#define RACFG_CMD_ATE_IO_WRITE_BULK		0x0116
-#define RACFG_CMD_ATE_BBP_READ_BULK		0x0117
-#define RACFG_CMD_ATE_BBP_WRITE_BULK	0x0118
-#define RACFG_CMD_ATE_RF_READ_BULK		0x0119
-#define RACFG_CMD_ATE_RF_WRITE_BULK		0x011a
-
-
-
-#define A2Hex(_X, _p) 				\
-{									\
-	UCHAR *p;						\
-	_X = 0;							\
-	p = _p;							\
-	while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9')))		\
-	{												\
-		if ((*p >= 'a') && (*p <= 'f'))				\
-			_X = _X * 16 + *p - 87;					\
-		else if ((*p >= 'A') && (*p <= 'F'))		\
-			_X = _X * 16 + *p - 55;					\
-		else if ((*p >= '0') && (*p <= '9'))		\
-			_X = _X * 16 + *p - 48;					\
-		p++;										\
-	}												\
-}
-
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-
-#define	LEN_OF_ARG 16
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	unsigned short Command_Id;
-	struct ate_racfghdr *pRaCfg;
-	INT	Status = NDIS_STATUS_SUCCESS;
-
-
-
-	if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL)
-	{
-		Status = -EINVAL;
-		return;
-	}
-
-	NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr));
-
-    if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length))
-	{
-		Status = -EFAULT;
-		kfree(pRaCfg);
-		return;
-	}
-
-
-	Command_Id = ntohs(pRaCfg->command_id);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __func__, Command_Id));
-
-	switch (Command_Id)
-	{
- 		// We will get this command when QA starts.
-		case RACFG_CMD_ATE_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n"));
-
-				// prepare feedback as soon as we can to avoid QA timeout.
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n"));
-				}
-				Set_ATE_Proc(pAdapter, "ATESTART");
-			}
-			break;
-
- 		// We will get this command either QA is closed or ated is killed by user.
-		case RACFG_CMD_ATE_STOP:
-			{
-				INT32 ret;
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
-
-				// Distinguish this command came from QA(via ated)
-				// or ate daemon according to the existence of pid in payload.
-				// No need to prepare feedback if this cmd came directly from ate daemon.
-				pRaCfg->length = ntohs(pRaCfg->length);
-
-				if (pRaCfg->length == sizeof(pAdapter->ate.AtePid))
-				{
-					// This command came from QA.
-					// Get the pid of ATE daemon.
-					memcpy((UCHAR *)&pAdapter->ate.AtePid,
-						(&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */,
-						sizeof(pAdapter->ate.AtePid));
-
-					// prepare feedback as soon as we can to avoid QA timeout.
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n"));
-	                    Status = -EFAULT;
-	            	}
-
-					//
-					// kill ATE daemon when leaving ATE mode.
-					// We must kill ATE daemon first before setting ATESTOP,
-					// or Microsoft will report sth. wrong.
-					ret = KILL_THREAD_PID(pAdapter->ate.AtePid, SIGTERM, 1);
-					if (ret)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
-					}
-				}
-
-				// AP might have in ATE_STOP mode due to cmd from QA.
-				if (ATE_ON(pAdapter))
-				{
-					// Someone has killed ate daemon while QA GUI is still open.
-					Set_ATE_Proc(pAdapter, "ATESTOP");
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RF_WRITE_ALL:
-			{
-				UINT32 R1, R2, R3, R4;
-				USHORT channel;
-
-				memcpy(&R1, pRaCfg->data-2, 4);
-				memcpy(&R2, pRaCfg->data+2, 4);
-				memcpy(&R3, pRaCfg->data+6, 4);
-				memcpy(&R4, pRaCfg->data+10, 4);
-				memcpy(&channel, pRaCfg->data+14, 2);
-
-				pAdapter->LatchRfRegs.R1 = ntohl(R1);
-				pAdapter->LatchRfRegs.R2 = ntohl(R2);
-				pAdapter->LatchRfRegs.R3 = ntohl(R3);
-				pAdapter->LatchRfRegs.R4 = ntohl(R4);
-				pAdapter->LatchRfRegs.Channel = ntohs(channel);
-
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n"));
-				}
-			}
-            break;
-
-		case RACFG_CMD_E2PROM_READ16:
-			{
-				USHORT	offset, value, tmp;
-
-				offset = ntohs(pRaCfg->status);
-				/* "tmp" is expecially for some compilers... */
-				RT28xx_EEPROM_READ16(pAdapter, offset, tmp);
-				value = tmp;
-				value = htons(value);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value));
-
-				// prepare feedback
-				pRaCfg->length = htons(4);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 2);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr)));
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n"));
-				}
-           	}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE16:
-			{
-				USHORT	offset, value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 2);
-				value = ntohs(value);
-				RT28xx_EEPROM_WRITE16(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_READ_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				rt_ee_read_all(pAdapter,(USHORT *)buffer);
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE);
-
-				// prepare feedback
-				pRaCfg->length = htons(2+EEPROM_SIZE);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE);
-				memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE);
-				rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n"));
-				}
-
-			}
-			break;
-
-		case RACFG_CMD_IO_READ:
-			{
-				UINT32	offset;
-				UINT32	value;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset out.
-				offset &= 0x0000FFFF;
-				RTMP_IO_READ32(pAdapter, offset, &value);
-				value = htonl(value);
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 4);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_WRITE:
-			{
-				UINT32	offset, value;
-
-				memcpy(&offset, pRaCfg->data-2, 4);
-				memcpy(&value, pRaCfg->data+2, 4);
-
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract out the offset.
-				offset &= 0x0000FFFF;
-				value = ntohl(value);
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value));
-				RTMP_IO_WRITE32(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_READ_BULK:
-			{
-				UINT32	offset;
-				USHORT	len;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset.
-				offset &= 0x0000FFFF;
-				memcpy(&len, pRaCfg->data+2, 2);
-				len = ntohs(len);
-
-				if (len > 371)
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n"));
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(1);
-					break;
-				}
-
-				RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes
-
-				// prepare feedback
-				pRaCfg->length = htons(2+len*4);// unit in four bytes
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				value = 0;
-				offset = ntohs(pRaCfg->status);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				else
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				// prepare feedback
-				pRaCfg->length = htons(3);
-				pRaCfg->status = htons(0);
-				pRaCfg->data[0] = value;
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value));
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n"));
-				}
-			}
-			break;
-		case RACFG_CMD_BBP_WRITE8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 1);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-				else
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-
-				if ((offset == BBP_R1) || (offset == BBP_R3))
-				{
-					SyncTxRxConfig(pAdapter, offset, value);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ_ALL:
-			{
-				USHORT j;
-
-				for (j = 0; j < 137; j++)
-				{
-					pRaCfg->data[j] = 0;
-
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-					else
-					{
-						RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2+137);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			if (offset + len <= EEPROM_SIZE)
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len);
-			else
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n"));
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n"));
-                Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len);
-			rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_IO_WRITE_BULK:
-		{
-			UINT32 offset, i, value;
-			USHORT len;
-
-			memcpy(&offset, &pRaCfg->status, 4);
-			offset = ntohl(offset);
-			memcpy(&len, pRaCfg->data+2, 2);
-			len = ntohs(len);
-
-			for (i = 0; i < len; i += 4)
-			{
-				memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4);
-				printk("Write %x %x\n", offset + i, value);
-				RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-				else
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-				else
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n"));
-			}
-		}
-			break;
-
-#ifdef CONFIG_RALINK_RT3052
-		case RACFG_CMD_ATE_RF_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-				RT30xxReadRFRegister(pAdapter, j,  &pRaCfg->data[j - offset]);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_RF_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				RT30xxWriteRFRegister(pAdapter, j,  *value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-#endif
-
-
-		case RACFG_CMD_GET_NOISE_LEVEL:
-			{
-				UCHAR	channel;
-				INT32   buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */
-
-				channel = (ntohs(pRaCfg->status) & 0x00FF);
-				CalNoiseLevel(pAdapter, channel, buffer);
-				memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10));
-
-				// prepare feedback
-				pRaCfg->length = htons(2 + (sizeof(INT32)*3*10));
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_COUNTER:
-			{
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4);
-
-				pRaCfg->length = htons(2+60);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_CLEAR_COUNTER:
-			{
-				pAdapter->ate.U2M = 0;
-				pAdapter->ate.OtherData = 0;
-				pAdapter->ate.Beacon = 0;
-				pAdapter->ate.OtherCount = 0;
-				pAdapter->ate.TxAc0 = 0;
-				pAdapter->ate.TxAc1 = 0;
-				pAdapter->ate.TxAc2 = 0;
-				pAdapter->ate.TxAc3 = 0;
-				pAdapter->ate.TxHCCA = 0;
-				pAdapter->ate.TxMgmt = 0;
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_TX_START:
-			{
-				USHORT *p;
-				USHORT	err = 1;
-				UCHAR   Bbp22Value = 0, Bbp24Value = 0;
-
-				if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n"));
-					err = 2;
-					goto TX_START_ERROR;
-				}
-				else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					int i = 0;
-
-					while ((i++ < 10) && (pAdapter->ate.TxStatus != 0))
-					{
-						RTMPusecDelay(5000);
-					}
-
-					// force it to stop
-					pAdapter->ate.TxStatus = 0;
-					pAdapter->ate.TxDoneCount = 0;
-					//pAdapter->ate.Repeat = 0;
-					pAdapter->ate.bQATxStart = FALSE;
-				}
-
-				// If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression.
-				if (ntohs(pRaCfg->length) != 0)
-				{
-					// Get frame info
-
-					NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16);
-#ifdef RT_BIG_ENDIAN
-					RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
-					NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4);
-					pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount);
-
-					p = (USHORT *)(&pRaCfg->data[22]);
-					//p = pRaCfg->data + 22;
-					// always use QID_AC_BE
-					pAdapter->ate.QID = 0;
-					p = (USHORT *)(&pRaCfg->data[24]);
-					//p = pRaCfg->data + 24;
-					pAdapter->ate.HLen = ntohs(*p);
-
-					if (pAdapter->ate.HLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n"));
-						err = 3;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen);
-
-
-					pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28);
-
-					if (pAdapter->ate.PLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n"));
-						err = 4;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen);
-					pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen;
-				}
-
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value);
-
-				switch (Bbp22Value)
-				{
-					case BBP22_TXFRAME:
-						{
-							if (pAdapter->ate.TxCount == 0)
-							{
-								pAdapter->ate.TxCount = 0xFFFFFFFF;
-							}
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXFRAME");
-						}
-						break;
-
-					case BBP22_TXCONT_OR_CARRSUPP:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n"));
-							ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value);
-
-							switch (Bbp24Value)
-							{
-								case BBP24_TXCONT:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										Set_ATE_Proc(pAdapter, "TXCONT");
-									}
-									break;
-
-								case BBP24_CARRSUPP:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										pAdapter->ate.Mode |= ATE_TXCARRSUPP;
-									}
-									break;
-
-								default:
-									{
-										ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-									}
-									break;
-							}
-						}
-						break;
-
-					case BBP22_TXCARR:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXCARR");
-						}
-						break;
-
-					default:
-						{
-							ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-						}
-						break;
-				}
-
-				if (pAdapter->ate.bQATxStart == TRUE)
-				{
-					// prepare feedback
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n"));
-	                    Status = -EFAULT;
-	            	}
-					else
-					{
-	                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n"));
-					}
-					break;
-				}
-
-TX_START_ERROR:
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(err);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_TX_STATUS:
-			{
-				UINT32 count;
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				count = htonl(pAdapter->ate.TxDoneCount);
-				NdisMoveMemory(pRaCfg->data, &count, 4);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_TX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "TXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				pAdapter->ate.bQARxStart = TRUE;
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "RXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		/* The following cases are for new ATE GUI(not QA). */
-		/*==================================================*/
-		case RACFG_CMD_ATE_START_TX_CARRIER:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCARR");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_CONT:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCONT");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n"));
-
-				Set_ATE_Proc(pAdapter, "TXFRAME");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_BW:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-
-				Set_ATE_TX_BW_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER0:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER0_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER1:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER1_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_FREQ_OFFSET:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_GET_STATISTICS:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n"));
-
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4);
-
-				if (pAdapter->ate.RxAntennaSel == 0)
-				{
-					INT32 RSSI0 = 0;
-					INT32 RSSI1 = 0;
-					INT32 RSSI2 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta);
-					RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4);
-					pRaCfg->length = htons(2+52);
-				}
-				else
-				{
-					INT32 RSSI0 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					pRaCfg->length = htons(2+44);
-				}
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_RESET_COUNTER:
-			{
-				SHORT    value = 1;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n"));
-
-				sprintf((PCHAR)str, "%d", value);
-				Set_ResetStatCounter_Proc(pAdapter, str);
-
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_SEL_TX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SEL_RX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_RX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_PREAMBLE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MODE_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_CHANNEL:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_CHANNEL_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR1:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0],
-						pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR2:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0],
-						pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR3:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0],
-						pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_RATE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MCS_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_LEN:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_LENGTH_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_COUNT:
-			{
-				USHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				/* TX_FRAME_COUNT == 0 means tx infinitely */
-				if (value == 0)
-				{
-					/* Use TxCount = 0xFFFFFFFF to approximate the infinity. */
-					pAdapter->ate.TxCount = 0xFFFFFFFF;
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAdapter->ate.TxCount));
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
-				}
-				else
-				{
-					sprintf((PCHAR)str, "%d", value);
-					Set_ATE_TX_COUNT_Proc(pAdapter, str);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_RX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-		default:
-			break;
-	}
-    ASSERT(pRaCfg != NULL);
-    if (pRaCfg != NULL)
-    {
-    kfree(pRaCfg);
-    }
-	return;
-}
-
-VOID BubbleSort(INT32 n, INT32 a[])
-{
-	INT32 k, j, temp;
-
-	for (k = n-1;  k>0;  k--)
-	{
-		for (j = 0; j<k; j++)
-		{
-			if(a[j] > a[j+1])
-			{
-				temp = a[j];
-				a[j]=a[j+1];
-				a[j+1]=temp;
-			}
-		}
-	}
-}
-
-VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10])
-{
-	INT32		RSSI0, RSSI1, RSSI2;
- 	CHAR		Rssi0Offset, Rssi1Offset, Rssi2Offset;
-	UCHAR		BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0;
-	UCHAR		Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0;
-	USHORT		LNA_Gain = 0;
-	INT32       j = 0;
-	UCHAR		Org_Channel = pAd->ate.Channel;
-	USHORT	    GainValue = 0, OffsetValue = 0;
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value);
-
-	//**********************************************************************
-	// Read the value of LNA gain and Rssi offset
-	//**********************************************************************
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue);
-
-	// for Noise Level
-	if (channel <= 14)
-	{
-		LNA_Gain = GainValue & 0x00FF;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	else
-	{
-		LNA_Gain = (GainValue & 0xFF00) >> 8;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	//**********************************************************************
-	{
-		pAd->ate.Channel = channel;
-		ATEAsicSwitchChannel(pAd);
-		mdelay(5);
-
-		data = 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data);
-		mdelay(5);
-
-		// Start Rx
-		pAd->ate.bQARxStart = TRUE;
-		Set_ATE_Proc(pAd, "RXFRAME");
-
-		mdelay(5);
-
-		for (j = 0; j < 10; j++)
-		{
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2);
-
-			mdelay(10);
-
-			// Calculate RSSI 0
-			if (BbpR50Rssi0 == 0)
-			{
-				RSSI0 = -100;
-			}
-			else
-			{
-				RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset);
-			}
-			RSSI[0][j] = RSSI0;
-
-			if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-			{
-				// Calculate RSSI 1
-				if (BbpR51Rssi1 == 0)
-				{
-					RSSI1 = -100;
-				}
-				else
-				{
-					RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset);
-				}
-				RSSI[1][j] = RSSI1;
-			}
-
-			if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-			{
-				// Calculate RSSI 2
-				if (BbpR52Rssi2 == 0)
-					RSSI2 = -100;
-				else
-					RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset);
-
-				RSSI[2][j] = RSSI2;
-			}
-		}
-
-		// Stop Rx
-		Set_ATE_Proc(pAd, "RXSTOP");
-
-		mdelay(5);
-
-#if 0// Debug Message................
-		ate_print("\n**********************************************************\n");
-		ate_print("Noise Level: Channel %d\n", channel);
-		ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-			RSSI[0][0], RSSI[0][1], RSSI[0][2],
-			RSSI[0][3], RSSI[0][4], RSSI[0][5],
-			RSSI[0][6], RSSI[0][7], RSSI[0][8],
-			RSSI[0][9]);
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[1][0], RSSI[1][1], RSSI[1][2],
-				RSSI[1][3], RSSI[1][4], RSSI[1][5],
-				RSSI[1][6], RSSI[1][7], RSSI[1][8],
-				RSSI[1][9]);
-		}
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[2][0], RSSI[2][1], RSSI[2][2],
-				RSSI[2][3], RSSI[2][4], RSSI[2][5],
-				RSSI[2][6], RSSI[2][7], RSSI[2][8],
-				RSSI[2][9]);
-		}
-#endif // 0 //
-		BubbleSort(10, RSSI[0]);	// 1R
-
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			BubbleSort(10, RSSI[1]);
-		}
-
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			BubbleSort(10, RSSI[2]);
-		}
-
-#if 0// Debug Message................
-		ate_print("\nAfter Sorting....Channel %d\n", channel);
-		ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-			RSSI[0][0], RSSI[0][1], RSSI[0][2],
-			RSSI[0][3], RSSI[0][4], RSSI[0][5],
-			RSSI[0][6], RSSI[0][7], RSSI[0][8],
-			RSSI[0][9]);
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[1][0], RSSI[1][1], RSSI[1][2],
-				RSSI[1][3], RSSI[1][4], RSSI[1][5],
-				RSSI[1][6], RSSI[1][7], RSSI[1][8],
-				RSSI[1][9]);
-		}
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[2][0], RSSI[2][1], RSSI[2][2],
-				RSSI[2][3], RSSI[2][4], RSSI[2][5],
-				RSSI[2][6], RSSI[2][7], RSSI[2][8],
-				RSSI[2][9]);
-		}
-		ate_print("**********************************************************\n");
-#endif // 0 //
-	}
-
-	pAd->ate.Channel = Org_Channel;
-	ATEAsicSwitchChannel(pAd);
-
-	// Restore original value
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value);
-
-	return;
-}
-
-BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value)
-{
-	UCHAR tmp = 0, bbp_data = 0;
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-
-	/* confirm again */
-	ASSERT(bbp_data == value);
-
-	switch(offset)
-	{
-		case BBP_R1:
-			/* Need to sync. tx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3;
-		    switch(tmp)
-		    {
-				/* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */
-		        case 2:
-					/* All */
-					pAd->ate.TxAntennaSel = 0;
-		            break;
-				/* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.TxAntennaSel = 1;
-		            break;
-				/* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.TxAntennaSel = 2;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong!  : return FALSE; \n", __func__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R1 */
-
-		case BBP_R3:
-			/* Need to sync. rx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */);
-		    switch(tmp)
-		    {
-				/* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */
-		        case 3:
-					/* All */
-					pAd->ate.RxAntennaSel = 0;
-		            break;
-				/* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */
-				/* unless the BBP R3 bit[4:3] = 2 */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.RxAntennaSel = 1;
-					tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3);
-					if (tmp == 2)// 3R
-					{
-						/* Default : All ADCs will be used by QA */
-						pAd->ate.RxAntennaSel = 0;
-					}
-		            break;
-				/* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.RxAntennaSel = 2;
-		            break;
-				/* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */
-		        case 2:
-					/* Antenna three */
-					pAd->ate.RxAntennaSel = 3;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible!  : return FALSE; \n", __func__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R3 */
-
-        default:
-            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong!  : return FALSE; \n", __func__));
-            return FALSE;
-
-	}
-	return TRUE;
-}
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i, Value = 0;
-	ULONG *pDst, *pSrc;
-	UCHAR *p8;
-
-	p8 = src;
-	pDst = (ULONG *) dst;
-	pSrc = (ULONG *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		/* For alignment issue, we need a variable "Value". */
-		memmove(&Value, pSrc, 4);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	if ((len % 4) != 0)
-	{
-		/* wish that it will never reach here */
-		memmove(&Value, pSrc, (len % 4));
-		Value = htonl(Value);
-		memmove(pDst, &Value, (len % 4));
-	}
-}
-
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i;
-	UCHAR *pDst, *pSrc;
-
-	pDst = dst;
-	pSrc = src;
-
-	for (i = 0; i < (len/2); i++)
-	{
-		memmove(pDst, pSrc, 2);
-		*((USHORT *)pDst) = htons(*((USHORT *)pDst));
-		pDst+=2;
-		pSrc+=2;
-	}
-
-	if ((len % 2) != 0)
-	{
-		memmove(pDst, pSrc, 1);
-	}
-}
-
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len)
-{
-	UINT32 i, Value;
-	UINT32 *pDst, *pSrc;
-
-	pDst = (UINT32 *) dst;
-	pSrc = (UINT32 *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	return;
-}
-
-// TODO:
-#if 0
-/* These work only when RALINK_ATE is defined */
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG value = simple_strtol(arg, 0, 10);
-	UCHAR buffer[26] = {0x88, 0x02, 0x2c, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x00, 0x55, 0x44, 0x33, 0x22, 0x11, 0xc0, 0x22, 0x00, 0x00};
-	POS_COOKIE pObj;
-
-	if (pAd->ate.TxStatus != 0)
-		return FALSE;
-
-	pAd->ate.TxInfo = 0x04000000;
-	bzero(&pAd->ate.TxWI, sizeof(TXWI_STRUC));
-	pAd->ate.TxWI.PHYMODE = 0;// MODE_CCK
-	pAd->ate.TxWI.MPDUtotalByteCount = 1226;
-	pAd->ate.TxWI.MCS = 3;
-	//pAd->ate.Mode = ATE_START;
-	pAd->ate.Mode |= ATE_TXFRAME;
-	pAd->ate.TxCount = value;
-	pAd->ate.QID = 0;
-	pAd->ate.HLen = 26;
-	pAd->ate.PLen = 0;
-	pAd->ate.DLen = 1200;
-	memcpy(pAd->ate.Header, buffer, 26);
-	pAd->ate.bQATxStart = TRUE;
-	//pObj = (POS_COOKIE) pAd->OS_Cookie;
-	//tasklet_hi_schedule(&pObj->AteTxTask);
-	return TRUE;
-}
-#endif  /* end of #if 0 */
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "TXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "RXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-#if 0
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT offset = 0, value;
-	PUCHAR p2 = arg;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 == ':')
-	{
-		A2Hex(offset, arg);
-		A2Hex(value, p2+ 1);
-	}
-	else
-	{
-		A2Hex(value, arg);
-	}
-
-	if (offset >= EEPROM_SIZE)
-	{
-		ate_print("Offset can not exceed EEPROM_SIZE( == 0x%04x)\n", EEPROM_SIZE);
-		return FALSE;
-	}
-
-	RTMP_EEPROM_WRITE16(pAd, offset, value);
-
-	return TRUE;
-}
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR value = 0, offset;
-
-	A2Hex(offset, arg);
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset,  &value);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset,  &value);
-	}
-
-	ate_print("%x\n", value);
-
-	return TRUE;
-}
-
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT offset = 0;
-	PUCHAR p2 = arg;
-	UCHAR value;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 == ':')
-	{
-		A2Hex(offset, arg);
-		A2Hex(value, p2+ 1);
-	}
-	else
-	{
-		A2Hex(value, arg);
-	}
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, offset,  value);
-	}
-	else
-	{
-		RTNP_BBP_IO_WRITE8_BY_REG_ID(pAd, offset,  value);
-	}
-
-	return TRUE;
-}
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	PUCHAR p2, p3, p4;
-	ULONG R1, R2, R3, R4;
-
-	p2 = arg;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 != ':')
-		return FALSE;
-
-	p3 = p2 + 1;
-
-	while((*p3 != ':') && (*p3 != '\0'))
-	{
-		p3++;
-	}
-
-	if (*p3 != ':')
-		return FALSE;
-
-	p4 = p3 + 1;
-
-	while((*p4 != ':') && (*p4 != '\0'))
-	{
-		p4++;
-	}
-
-	if (*p4 != ':')
-		return FALSE;
-
-
-	A2Hex(R1, arg);
-	A2Hex(R2, p2 + 1);
-	A2Hex(R3, p3 + 1);
-	A2Hex(R4, p4 + 1);
-
-	RTMP_RF_IO_WRITE32(pAd, R1);
-	RTMP_RF_IO_WRITE32(pAd, R2);
-	RTMP_RF_IO_WRITE32(pAd, R3);
-	RTMP_RF_IO_WRITE32(pAd, R4);
-
-	return TRUE;
-}
-#endif  // end of #if 0 //
-#endif	// RALINK_28xx_QA //
-
-#endif	// RALINK_ATE //
-
diff --git a/drivers/staging/rt2860/rt_ate.h b/drivers/staging/rt2860/rt_ate.h
deleted file mode 100644
index 18381c3..0000000
--- a/drivers/staging/rt2860/rt_ate.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __ATE_H__
-#define __ATE_H__
-
-#define ate_print printk
-#define ATEDBGPRINT DBGPRINT
-#define EEPROM_SIZE								0x200
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2860STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-
-#define ATE_ON(_p)              (((_p)->ate.Mode) != ATE_STOP)
-
-/* RT2880_iNIC will define "RT2860". */
-#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)        \
-{                                                       \
-    BBP_CSR_CFG_STRUC  BbpCsr;                             \
-    int             i, k;                               \
-    for (i=0; i<MAX_BUSY_COUNT; i++)                    \
-    {                                                   \
-        RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word);     \
-        if (BbpCsr.field.Busy == BUSY)                  \
-        {                                               \
-            continue;                                   \
-        }                                               \
-        BbpCsr.word = 0;                                \
-        BbpCsr.field.fRead = 1;                         \
-        BbpCsr.field.BBP_RW_MODE = 1;                         \
-        BbpCsr.field.Busy = 1;                          \
-        BbpCsr.field.RegNum = _I;                       \
-        RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word);     \
-        for (k=0; k<MAX_BUSY_COUNT; k++)                \
-        {                                               \
-            RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
-            if (BbpCsr.field.Busy == IDLE)              \
-                break;                                  \
-        }                                               \
-        if ((BbpCsr.field.Busy == IDLE) &&              \
-            (BbpCsr.field.RegNum == _I))                \
-        {                                               \
-            *(_pV) = (UCHAR)BbpCsr.field.Value;         \
-            break;                                      \
-        }                                               \
-    }                                                   \
-    if (BbpCsr.field.Busy == BUSY)                      \
-    {                                                   \
-        ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP read R%d fail\n", _I));      \
-        *(_pV) = (_A)->BbpWriteLatch[_I];               \
-    }                                                   \
-}
-
-#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)        \
-{                                                       \
-    BBP_CSR_CFG_STRUC  BbpCsr;                             \
-    int             BusyCnt;                            \
-    for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++)  \
-    {                                                   \
-        RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word);     \
-        if (BbpCsr.field.Busy == BUSY)                  \
-            continue;                                   \
-        BbpCsr.word = 0;                                \
-        BbpCsr.field.fRead = 0;                         \
-        BbpCsr.field.BBP_RW_MODE = 1;                         \
-        BbpCsr.field.Busy = 1;                          \
-        BbpCsr.field.Value = _V;                        \
-        BbpCsr.field.RegNum = _I;                       \
-        RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word);     \
-        (_A)->BbpWriteLatch[_I] = _V;                   \
-        break;                                          \
-    }                                                   \
-    if (BusyCnt == MAX_BUSY_COUNT)                      \
-    {                                                   \
-        ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP write R%d fail\n", _I));     \
-    }                                                   \
-}
-
-/* RT2880_iNIC will define RT2860. */
-#define EEPROM_SIZE								0x200
-/* iNIC has its own EEPROM_BIN_FILE_NAME */
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2860STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-
-
-VOID rt_ee_read_all(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT USHORT *Data);
-
-
-VOID rt_ee_write_all(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT *Data);
-
-INT Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER		pAd,
-	IN PRXWI_STRUC			pRxWI,
-	IN PRT28XX_RXD_STRUC    p28xxRxD,
-	IN PHEADER_802_11		pHeader);
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID BubbleSort(
-	IN  INT32 n,
-	IN  INT32 a[]);
-
-VOID CalNoiseLevel(
-	IN  PRTMP_ADAPTER   pAdapter,
-	IN  UCHAR           channel,
-	OUT INT32           buffer[3][10]);
-
-BOOLEAN SyncTxRxConfig(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	USHORT			offset,
-	IN	UCHAR			value);
-
-#if 0
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif  // 0 //
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#if 0
-INT Set_EERead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // end of #if 0 //
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-VOID ATEAsicSwitchChannel(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd);
-
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI);
-
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd);
-#endif // CONFIG_STA_SUPPORT //
-#endif // __ATE_H__ //
diff --git a/drivers/staging/rt2860/rt_config.h b/drivers/staging/rt2860/rt_config.h
index 570cab2..8fbcab3 100644
--- a/drivers/staging/rt2860/rt_config.h
+++ b/drivers/staging/rt2860/rt_config.h
@@ -72,10 +72,6 @@
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#ifdef RALINK_ATE
-#include "rt_ate.h"
-#endif // RALINK_ATE //
-
 #ifdef CONFIG_STA_SUPPORT
 #ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 #ifndef WPA_SUPPLICANT_SUPPORT
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index 9401866..0f1bd4e 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -1274,15 +1274,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 	int status = 0;
 	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
 
-	/* RT2870STA does this in RTMPSendPackets() */
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES);
-		return 0;
-	}
-#endif // RALINK_ATE //
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index fb97dbb..1217756 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -183,89 +183,6 @@ extern UCHAR  PRE_N_HT_OUI[];
 
 #define	MAXSEQ		(0xFFF)
 
-#ifdef RALINK_ATE
-typedef	struct _ATE_INFO {
-	UCHAR	Mode;
-	CHAR	TxPower0;
-	CHAR	TxPower1;
-	CHAR    TxAntennaSel;
-	CHAR    RxAntennaSel;
-	TXWI_STRUC  TxWI; 	  // TXWI
-	USHORT	QID;
-	UCHAR	Addr1[MAC_ADDR_LEN];
-	UCHAR	Addr2[MAC_ADDR_LEN];
-	UCHAR	Addr3[MAC_ADDR_LEN];
-	UCHAR	Channel;
-	UINT32	TxLength;
-	UINT32	TxCount;
-	UINT32	TxDoneCount; // Tx DMA Done
-	UINT32	RFFreqOffset;
-	BOOLEAN	bRxFer;
-	BOOLEAN	bQATxStart; // Have compiled QA in and use it to ATE tx.
-	BOOLEAN	bQARxStart;	// Have compiled QA in and use it to ATE rx.
-	BOOLEAN	bFWLoading;	// Reload firmware when ATE is done.
-	UINT32	RxTotalCnt;
-	UINT32	RxCntPerSec;
-
-	CHAR	LastSNR0;             // last received SNR
-	CHAR    LastSNR1;             // last received SNR for 2nd  antenna
-	CHAR    LastRssi0;            // last received RSSI
-	CHAR    LastRssi1;            // last received RSSI for 2nd  antenna
-	CHAR    LastRssi2;            // last received RSSI for 3rd  antenna
-	CHAR    AvgRssi0;             // last 8 frames' average RSSI
-	CHAR    AvgRssi1;             // last 8 frames' average RSSI
-	CHAR    AvgRssi2;             // last 8 frames' average RSSI
-	SHORT   AvgRssi0X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi1X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi2X8;           // sum of last 8 frames' RSSI
-
-	UINT32	NumOfAvgRssiSample;
-
-#ifdef RALINK_28xx_QA
-	// Tx frame
-	USHORT		HLen; // Header Length
-	USHORT		PLen; // Pattern Length
-	UCHAR 		Header[32]; // Header buffer
-	UCHAR		Pattern[32]; // Pattern buffer
-	USHORT		DLen; // Data Length
-	USHORT		seq;
-	UINT32		CID;
-	THREAD_PID 		AtePid;
-	// counters
-	UINT32		U2M;
-	UINT32		OtherData;
-	UINT32		Beacon;
-	UINT32		OtherCount;
-	UINT32		TxAc0;
-	UINT32		TxAc1;
-	UINT32		TxAc2;
-	UINT32		TxAc3;
-	UINT32		TxHCCA;
-	UINT32		TxMgmt;
-	UINT32		RSSI0;
-	UINT32		RSSI1;
-	UINT32		RSSI2;
-	UINT32		SNR0;
-	UINT32		SNR1;
-	// control
-	//UINT32		Repeat; // Tx Cpu count
-	UCHAR		TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-}	ATE_INFO, *PATE_INFO;
-
-#ifdef RALINK_28xx_QA
-struct ate_racfghdr {
- 	UINT32		magic_no;
-	USHORT		command_type;
-	USHORT		command_id;
-	USHORT		length;
-	USHORT		sequence;
-	USHORT		status;
-	UCHAR		data[2046];
-}  __attribute__((packed));
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 struct reordering_mpdu
 {
@@ -2936,10 +2853,6 @@ typedef struct _RTMP_ADAPTER
 
     struct wificonf			WIFItestbed;
 
-#ifdef RALINK_ATE
-	ATE_INFO				ate;
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 	struct reordering_mpdu_pool mpdu_blk_pool;
 #endif // DOT11_N_SUPPORT //
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h
index eaf04bf..e9bc055 100644
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -1332,26 +1332,6 @@
 #define INT_APCLI                   0x0400
 #define INT_MESH                   	0x0500
 
-// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define	ATE_START                   0x00   // Start ATE
-#define	ATE_STOP                    0x80   // Stop ATE
-#define	ATE_TXCONT                  0x05   // Continuous Transmit
-#define	ATE_TXCARR                  0x09   // Transmit Carrier
-#define	ATE_TXCARRSUPP              0x11   // Transmit Carrier Suppression
-#define	ATE_TXFRAME                 0x01   // Transmit Frames
-#define	ATE_RXFRAME                 0x02   // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP                  0xe2   // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP					0xfd   // Stop receiving Frames
-#define	BBP22_TXFRAME     			0x00   // Transmit Frames
-#define	BBP22_TXCONT_OR_CARRSUPP    0x80   // Continuous Transmit or Carrier Suppression
-#define	BBP22_TXCARR                0xc1   // Transmit Carrier
-#define	BBP24_TXCONT                0x00   // Continuous Transmit
-#define	BBP24_CARRSUPP              0x01   // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 // WEP Key TYPE
 #define WEP_HEXADECIMAL_TYPE    0
 #define WEP_ASCII_TYPE          1
diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c
index d8bcc76..e259a99 100644
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -234,13 +234,6 @@ VOID CntlIdleProc(
 			break;
 
 		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if(ATE_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
 			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
 			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
@@ -283,13 +276,6 @@ VOID CntlOidScanProc(
 	ULONG                      BssIdx = BSS_NOT_FOUND;
 	BSS_ENTRY                  CurrBss;
 
-#ifdef RALINK_ATE
-/* Disable scanning when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 	// record current BSS if network is connected.
 	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
@@ -513,12 +499,6 @@ VOID CntlOidRTBssidProc(
 	MLME_DISASSOC_REQ_STRUCT    DisassocReq;
 	MLME_JOIN_REQ_STRUCT        JoinReq;
 
-#ifdef RALINK_ATE
-/* No need to perform this routine when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	// record user desired settings
 	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
 	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
@@ -1973,12 +1953,6 @@ VOID LinkDown(
 	if (MONITOR_ON(pAd))
 		return;
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
 	RTMPCancelTimer(&pAd->Mlme.PsPollTimer,		&Cancelled);
 
diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c
index c5e76a2..836ce8c 100644
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -749,22 +749,6 @@ BOOLEAN STARxDoneInterruptHandle(
 			break;
 		}
 		/* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */
-#ifdef RALINK_ATE
-		if (ATE_ON(pAd))
-		{
-			pAd->ate.RxCntPerSec++;
-			ATESampleRssi(pAd, pRxWI);
-#ifdef RALINK_28xx_QA
-			if (pAd->ate.bQARxStart == TRUE)
-			{
-				/* (*pRxD) has been swapped in GetPacketFromRxRing() */
-				ATE_QA_Statistics(pAd, pRxWI, pRxD,	pHeader);
-			}
-#endif // RALINK_28xx_QA //
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-			continue;
-		}
-#endif // RALINK_ATE //
 
 		// Check for all RxD errors
 		Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD);
@@ -1283,14 +1267,6 @@ VOID	RTMPSendNullFrame(
 	ULONG	Length;
 	PHEADER_802_11	pHeader_802_11;
 
-
-#ifdef RALINK_ATE
-	if(ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
     // WPA 802.1x secured port control
     if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c
index 148037a..3b710c8 100644
--- a/drivers/staging/rt2860/sta/sync.c
+++ b/drivers/staging/rt2860/sta/sync.c
@@ -1018,14 +1018,6 @@ VOID PeerBeacon(
 	UCHAR			AddHtInfoLen;
 	UCHAR			NewExtChannelOffset = 0xff;
 
-
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
 	if (!(INFRA_ON(pAd) || ADHOC_ON(pAd)
 		))
 		return;
@@ -1811,14 +1803,6 @@ VOID InvalidStateWhenStart(
 VOID EnqueuePsPoll(
 	IN PRTMP_ADAPTER pAd)
 {
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-
 	if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP)
     	pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE;
 	MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index 8f0fe39..2719ef7 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -274,40 +274,6 @@ static struct {
 	{"Debug",						Set_Debug_Proc},
 #endif
 
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #ifdef WPA_SUPPLICANT_SUPPORT
     {"WpaSupport",                  Set_Wpa_Support},
 #endif // WPA_SUPPLICANT_SUPPORT //
@@ -1945,14 +1911,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     memset(extra, 0x00, IW_PRIV_SIZE_MASK);
     sprintf(extra, "\n\n");
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
 	{
     sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
     sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
@@ -1968,22 +1926,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
 
     sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
 	{
     	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
         sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
@@ -2889,13 +2831,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 			{
 				if (bbpId <= 136)
 				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
 					{
 					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
 					}
@@ -2921,15 +2856,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 			{
 				if (bbpId <= 136)
 				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
 					{
 					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
     					//Read it back for showing
@@ -2964,13 +2890,6 @@ next:
 		{
 		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
                 break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
 			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
 			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
 			if (bbpId%5 == 4)
@@ -3298,13 +3217,6 @@ INT RTMPSetInformation(
             }
             break;
         case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
             Now = jiffies;
 			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
 
@@ -3406,13 +3318,6 @@ INT RTMPSetInformation(
             }
             break;
         case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
             if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
                 Status  = -EINVAL;
             else
@@ -4029,13 +3934,6 @@ INT RTMPSetInformation(
 			break;
 
 		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
 			//
 			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
 			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
@@ -4617,16 +4515,6 @@ INT RTMPQueryInformation(
 				Status = -EFAULT;
             }
             break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
         case OID_802_11_BSSID_LIST:
             if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
             {
@@ -4768,14 +4656,6 @@ INT RTMPQueryInformation(
             Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
             break;
         case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
             if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
             {
                 Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
@@ -5485,15 +5365,6 @@ INT rt28xx_sta_ioctl(
 
 	switch(cmd)
 	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
         case SIOCGIFHWADDR:
 			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
 			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
@@ -6714,13 +6585,6 @@ VOID RTMPIoctlMAC(
                         UCHAR R66;
                         pAdapter->BbpTuning.bEnable = FALSE;
                         R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
                         DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
                     }
-- 
1.6.3.2