From: Bill Pemberton <wfp5p at virginia.edu>
Signed-off-by: Bill Pemberton <wfp5p at virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
.../comedi/drivers/addi-data/APCI1710_82x54.c | 70 ++++++++++----------
1 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
index 3f8ffa2..b3ee729 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
@@ -233,9 +233,9 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
unsigned char b_OutputLevel;
unsigned char b_HardwareGateLevel;
- //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
unsigned int dw_Test = 0;
- //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
i_ReturnValue = insn->n;
b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
@@ -256,7 +256,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
if (b_TimerNbr <= 2) {
/* Test the timer mode */
if (b_TimerMode <= 5) {
- //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
/* Test te imput clock selection */
/*
if (((b_TimerNbr == 0) && (b_InputClockSelection == 0)) ||
@@ -271,11 +271,11 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
((b_InputClockSelection == APCI1710_PCI_BUS_CLOCK) ||
(b_InputClockSelection == APCI1710_FRONT_CONNECTOR_INPUT) ||
(b_InputClockSelection == APCI1710_10MHZ)))) {
- //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
if (((b_InputClockSelection == APCI1710_10MHZ) &&
((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) >= 0x3131)) ||
(b_InputClockSelection != APCI1710_10MHZ)) {
- //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
/* Test the input clock level selection */
if ((b_InputClockLevel == 0) ||
@@ -284,7 +284,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) {
/* Test the hardware gate level selection */
if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) {
- //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
/* Test if version > 1.1 and clock selection = 10MHz */
if ((b_InputClockSelection == APCI1710_10MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) > 0x3131)) {
/* Test if 40MHz quartz on board */
@@ -297,7 +297,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
/* Test if detection OK */
if (dw_Test == 1) {
- //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
/* Initialisation OK */
devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init = 1;
@@ -314,7 +314,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_HardwareGateLevel = b_HardwareGateLevel;
/* Set the configuration word and disable the timer */
- //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
/*
devpriv->s_ModuleInfo [b_ModulNbr].
s_82X54ModuleInfo.
@@ -330,7 +330,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
}
devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = (unsigned int)(((b_HardwareGateLevel << 0) & 0x1) | ((b_InputClockLevel << 1) & 0x2) | (((~b_OutputLevel & 1) << 2) & 0x4) | ((b_InputClockSelection << 4) & 0x30));
- //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
/* Initialise the 82X54 Timer */
@@ -338,31 +338,31 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
/* Write the reload value */
outl(ul_ReloadValue, devpriv->s_BoardInfos.ui_Address + 0 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
- //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
- } // if (dw_Test == 1)
+ /* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
+ } /* if (dw_Test == 1) */
else {
/* Input timer clock selection is wrong */
i_ReturnValue = -6;
- } // if (dw_Test == 1)
- //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
- } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1))
+ } /* if (dw_Test == 1) */
+ /* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
+ } /* if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) */
else {
/* Selection from hardware gate level is wrong */
DPRINTK("Selection from hardware gate level is wrong\n");
i_ReturnValue = -9;
- } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1))
- } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1))
+ } /* if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) */
+ } /* if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) */
else {
/* Selection from output clock level is wrong */
DPRINTK("Selection from output clock level is wrong\n");
i_ReturnValue = -8;
- } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1))
- } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1))
+ } /* if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) */
+ } /* if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) */
else {
/* Selection from input clock level is wrong */
DPRINTK("Selection from input clock level is wrong\n");
i_ReturnValue = -7;
- } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1))
+ } /* if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) */
} else {
/* Input timer clock selection is wrong */
DPRINTK("Input timer clock selection is wrong\n");
@@ -373,18 +373,18 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
DPRINTK("Input timer clock selection is wrong\n");
i_ReturnValue = -6;
}
- } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5))
+ } /* if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) */
else {
/* Timer mode selection is wrong */
DPRINTK("Timer mode selection is wrong\n");
i_ReturnValue = -5;
- } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5))
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) */
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
else {
/* Timer selection wrong */
DPRINTK("Timer selection wrong\n");
i_ReturnValue = -3;
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
} else {
/* The module is not a TIMER module */
DPRINTK("The module is not a TIMER module\n");
@@ -431,7 +431,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,struct come
i_ReturnValue=insn->n;
b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
b_TimerNbr = (unsigned char) CR_CHAN(insn->chanspec);
- b_ActionType = (unsigned char) data[0]; // enable disable
+ b_ActionType = (unsigned char) data[0]; /* enable disable */
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
@@ -462,7 +462,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
i_ReturnValue = insn->n;
b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
b_TimerNbr = (unsigned char) CR_CHAN(insn->chanspec);
- b_ActionType = (unsigned char) data[0]; // enable disable
+ b_ActionType = (unsigned char) data[0]; /* enable disable */
/* Test the module number */
if (b_ModulNbr < 4) {
@@ -487,9 +487,9 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord | 0x8;
outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
- devpriv->tsk_Current = current; // Save the current process task structure
+ devpriv->tsk_Current = current; /* Save the current process task structure */
- } // if (b_InterruptEnable == APCI1710_ENABLE)
+ } /* if (b_InterruptEnable == APCI1710_ENABLE) */
else {
/* Disable the interrupt */
devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord & 0xF7;
@@ -498,7 +498,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
/* Save the interrupt flag */
devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask & (0xFF - (1 << b_TimerNbr));
- } // if (b_InterruptEnable == APCI1710_ENABLE)
+ } /* if (b_InterruptEnable == APCI1710_ENABLE) */
/* Test if error occur */
if (i_ReturnValue >= 0) {
@@ -530,7 +530,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
/* Disable the timer */
outl(0, devpriv->s_BoardInfos.ui_Address + 44 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
break;
- } // Switch end
+ } /* Switch end */
} else {
/* Timer not initialised see function */
DPRINTK ("Timer not initialised see function\n");
@@ -540,7 +540,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
/* Timer selection wrong */
DPRINTK("Timer selection wrong\n");
i_ReturnValue = -3;
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
} else {
/* The module is not a TIMER module */
DPRINTK("The module is not a TIMER module\n");
@@ -662,7 +662,7 @@ int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_su
i_ReturnValue = -2;
}
- } // End of Switch
+ } /* End of Switch */
return (i_ReturnValue);
}
@@ -800,7 +800,7 @@ int i_APCI1710_ReadTimerValue(struct comedi_device * dev,
/* Timer selection wrong */
DPRINTK("Timer selection wrong\n");
i_ReturnValue = -3;
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
} else {
/* The module is not a TIMER module */
DPRINTK("The module is not a TIMER module\n");
@@ -879,7 +879,7 @@ int i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
/* Timer selection wrong */
DPRINTK("Timer selection wrong\n");
i_ReturnValue = -3;
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
} else {
/* The module is not a TIMER module */
DPRINTK("The module is not a TIMER module\n");
@@ -958,7 +958,7 @@ int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
} else {
/* Timer selection wrong */
i_ReturnValue = -3;
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
} else {
/* The module is not a TIMER module */
@@ -1031,7 +1031,7 @@ int i_APCI1710_WriteTimerValue(struct comedi_device * dev,
/* Timer selection wrong */
DPRINTK("Timer selection wrong\n");
i_ReturnValue = -3;
- } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
} else {
/* The module is not a TIMER module */
DPRINTK("The module is not a TIMER module\n");
--
1.6.3.2
