From: Bill Pemberton <wfp5p at virginia.edu>
Signed-off-by: Bill Pemberton <wfp5p at virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/comedi/drivers/adl_pci6208.c | 122 +++++++++++++-------------
1 files changed, 61 insertions(+), 61 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index f710f55..7e27f92 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -61,35 +61,35 @@ struct pci6208_board {
const char *name;
unsigned short dev_id; /* `lspci` will show you this */
int ao_chans;
- //int ao_bits;
+ /* int ao_bits; */
};
static const struct pci6208_board pci6208_boards[] = {
/*{
name : "pci6208v",
- dev_id : 0x6208, //not sure
+ dev_id : 0x6208, // not sure
ao_chans: 8
- //, ao_bits : 16
+ // , ao_bits : 16
},
{
name : "pci6216v",
- dev_id : 0x6208, //not sure
+ dev_id : 0x6208, // not sure
ao_chans: 16
- //, ao_bits : 16
+ // , ao_bits : 16
}, */
{
name: "pci6208a",
dev_id: 0x6208,
ao_chans:8
- //, ao_bits : 16
+ /* , ao_bits : 16 */
}
};
/* This is used by modprobe to translate PCI IDs to drivers. Should
* only be used for PCI and ISA-PnP devices */
static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
- //{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- //{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+ /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
{PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0}
};
@@ -132,10 +132,10 @@ static int pci6208_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
struct comedi_insn * insn, unsigned int * data);
static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data);
-//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s,
-// struct comedi_insn *insn,unsigned int *data);
-//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s,
-// struct comedi_insn *insn,unsigned int *data);
+/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data); */
+/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data); */
/*
* Attach is called by the Comedi core to configure the driver
@@ -176,22 +176,22 @@ static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig *
s = dev->subdevices + 0;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE; //anything else to add here??
+ s->subdev_flags = SDF_WRITABLE; /* anything else to add here?? */
s->n_chan = thisboard->ao_chans;
- s->maxdata = 0xffff; //16-bit DAC
- s->range_table = &range_bipolar10; //this needs to be checked.
+ s->maxdata = 0xffff; /* 16-bit DAC */
+ s->range_table = &range_bipolar10; /* this needs to be checked. */
s->insn_write = pci6208_ao_winsn;
s->insn_read = pci6208_ao_rinsn;
- //s=dev->subdevices+1;
+ /* s=dev->subdevices+1; */
/* digital i/o subdevice */
- //s->type=COMEDI_SUBD_DIO;
- //s->subdev_flags=SDF_READABLE|SDF_WRITABLE;
- //s->n_chan=16;
- //s->maxdata=1;
- //s->range_table=&range_digital;
- //s->insn_bits = pci6208_dio_insn_bits;
- //s->insn_config = pci6208_dio_insn_config;
+ /* s->type=COMEDI_SUBD_DIO; */
+ /* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
+ /* s->n_chan=16; */
+ /* s->maxdata=1; */
+ /* s->range_table=&range_digital; */
+ /* s->insn_bits = pci6208_dio_insn_bits; */
+ /* s->insn_config = pci6208_dio_insn_config; */
printk("attached\n");
@@ -262,49 +262,49 @@ static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
* useful to applications if you implement the insn_bits interface.
* This allows packed reading/writing of the DIO channels. The
* comedi core can convert between insn_bits and insn_read/write */
-//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s,
-// struct comedi_insn *insn,unsigned int *data)
-//{
-// if(insn->n!=2)return -EINVAL;
+/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data) */
+/* { */
+/* if(insn->n!=2)return -EINVAL; */
/* The insn data is a mask in data[0] and the new data
* in data[1], each channel cooresponding to a bit. */
-// if(data[0]){
-// s->state &= ~data[0];
-// s->state |= data[0]&data[1];
+/* if(data[0]){ */
+/* s->state &= ~data[0]; */
+/* s->state |= data[0]&data[1]; */
/* Write out the new digital output lines */
- //outw(s->state,dev->iobase + SKEL_DIO);
-// }
+ /* outw(s->state,dev->iobase + SKEL_DIO); */
+/* } */
/* on return, data[1] contains the value of the digital
* input and output lines. */
- //data[1]=inw(dev->iobase + SKEL_DIO);
+ /* data[1]=inw(dev->iobase + SKEL_DIO); */
/* or we could just return the software copy of the output values if
* it was a purely digital output subdevice */
- //data[1]=s->state;
+ /* data[1]=s->state; */
-// return 2;
-//}
+/* return 2; */
+/* } */
-//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s,
-// struct comedi_insn *insn,unsigned int *data)
-//{
-// int chan=CR_CHAN(insn->chanspec);
+/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data) */
+/* { */
+/* int chan=CR_CHAN(insn->chanspec); */
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
* contains the channel to be changed, and data[0] contains the
* value COMEDI_INPUT or COMEDI_OUTPUT. */
-// if(data[0]==COMEDI_OUTPUT){
-// s->io_bits |= 1<<chan;
-// }else{
-// s->io_bits &= ~(1<<chan);
-// }
- //outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG);
+/* if(data[0]==COMEDI_OUTPUT){ */
+/* s->io_bits |= 1<<chan; */
+/* }else{ */
+/* s->io_bits &= ~(1<<chan); */
+/* } */
+ /* outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG); */
-// return 1;
-//}
+/* return 1; */
+/* } */
static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
{
@@ -317,9 +317,9 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
if (pci_dev->vendor == PCI_VENDOR_ID_ADLINK) {
for (i = 0; i < pci6208_board_nbr; i++) {
if (pci6208_boards[i].dev_id == pci_dev->device) {
- // was a particular bus/slot requested?
+ /* was a particular bus/slot requested? */
if ((bus != 0) || (slot != 0)) {
- // are we on the wrong bus/slot?
+ /* are we on the wrong bus/slot? */
if (pci_dev->bus->number
!= bus ||
PCI_SLOT(pci_dev->devfn)
@@ -346,10 +346,10 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
PCI_SLOT(pci_dev->devfn),
PCI_FUNC(pci_dev->devfn), pci_dev->irq);
- // TODO: Warn about non-tested boards.
- //switch(board->device_id)
- //{
- //};
+ /* TODO: Warn about non-tested boards. */
+ /* switch(board->device_id) */
+ /* { */
+ /* }; */
devpriv->pci_dev = pci_dev;
@@ -362,19 +362,19 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
{
unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
- // Enable PCI device and request regions
+ /* Enable PCI device and request regions */
if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) {
printk("comedi%d: Failed to enable PCI device and request regions\n", dev_minor);
return -EIO;
}
- // Read local configuration register base address [PCI_BASE_ADDRESS #1].
+ /* Read local configuration register base address [PCI_BASE_ADDRESS #1]. */
lcr_io_base = pci_resource_start(pci_dev, 1);
lcr_io_range = pci_resource_len(pci_dev, 1);
printk("comedi%d: local config registers at address 0x%4lx [0x%4lx]\n",
dev_minor, lcr_io_base, lcr_io_range);
- // Read PCI6208 register base address [PCI_BASE_ADDRESS #2].
+ /* Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. */
io_base = pci_resource_start(pci_dev, 2);
io_range = pci_resource_end(pci_dev, 2) - io_base + 1;
@@ -382,10 +382,10 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
dev_minor, io_base, io_range);
*io_base_ptr = io_base;
- //devpriv->io_range = io_range;
- //devpriv->is_valid=0;
- //devpriv->lcr_io_base=lcr_io_base;
- //devpriv->lcr_io_range=lcr_io_range;
+ /* devpriv->io_range = io_range; */
+ /* devpriv->is_valid=0; */
+ /* devpriv->lcr_io_base=lcr_io_base; */
+ /* devpriv->lcr_io_range=lcr_io_range; */
return 0;
}
--
1.6.3.2
