On Wed, Aug 23, 2023 at 08:51:48AM +0200, Martin Hundebøll wrote: > On Tue, 2023-07-18 at 09:56 +0200, Markus Schneider-Pargmann wrote: > > Hi Marc, Simon and everyone, > > > > v5 got a rebase on v6.5 with some small style fixes as pointed out in > > v4. > > > > It is tested on tcan455x but I don't have hardware with mcan on the > > SoC > > myself so any testing is appreciated. > > > > The series implements many small and bigger throughput improvements > > and > > adds rx/tx coalescing at the end. > > > > Based on v6.5-rc1. Also available at > > https://gitlab.baylibre.com/msp8/linux/-/tree/topic/mcan-optimization/v6.5?ref_type=heads > > For the whole series: > Tested-by: Martin Hundebøll <martin@xxxxxxxxxx> Thank you Martin! Best, Markus > > Thanks, > Martin > > > Changes in v5: > > - Add back parenthesis in m_can_set_coalesce(). This will make > > checkpatch unhappy but gcc happy. > > - Remove unused fifo_header variable in m_can_tx_handler(). > > - Rebased to v6.5-rc1 > > > > Changes in v4: > > - Create and use struct m_can_fifo_element in m_can_tx_handler > > - Fix memcpy_and_pad to copy the full buffer > > - Fixed a few checkpatch warnings > > - Change putidx to be unsigned > > - Print hard_xmit error only once when TX FIFO is full > > > > Changes in v3: > > - Remove parenthesis in error messages > > - Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit > > header and data in one transaction'. > > - Replace spin_lock with spin_lock_irqsave. I got a report of a > > interrupt that was calling start_xmit just after the netqueue was > > woken up before the locked region was exited. spin_lock_irqsave > > should > > fix this. I attached the full stack at the end of the mail if > > someone > > wants to know. > > - Rebased to v6.3-rc1. > > - Removed tcan4x5x patches from this series. > > > > Changes in v2: > > - Rebased on v6.2-rc5 > > - Fixed missing/broken accounting for non peripheral m_can devices. > > > > previous versions: > > v1 - > > https://lore.kernel.org/lkml/20221221152537.751564-1-msp@xxxxxxxxxxxx > > v2 - > > https://lore.kernel.org/lkml/20230125195059.630377-1-msp@xxxxxxxxxxxx > > v3 - > > https://lore.kernel.org/lkml/20230315110546.2518305-1-msp@xxxxxxxxxxxx/ > > v4 - > > https://lore.kernel.org/lkml/20230621092350.3130866-1-msp@xxxxxxxxxxxx/ > > > > Markus Schneider-Pargmann (12): > > can: m_can: Write transmit header and data in one transaction > > can: m_can: Implement receive coalescing > > can: m_can: Implement transmit coalescing > > can: m_can: Add rx coalescing ethtool support > > can: m_can: Add tx coalescing ethtool support > > can: m_can: Use u32 for putidx > > can: m_can: Cache tx putidx > > can: m_can: Use the workqueue as queue > > can: m_can: Introduce a tx_fifo_in_flight counter > > can: m_can: Use tx_fifo_in_flight for netif_queue control > > can: m_can: Implement BQL > > can: m_can: Implement transmit submission coalescing > > > > drivers/net/can/m_can/m_can.c | 517 +++++++++++++++++++++++++------- > > -- > > drivers/net/can/m_can/m_can.h | 35 ++- > > 2 files changed, 418 insertions(+), 134 deletions(-) > > > > > > base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5 >
