After an initial link up the CAN device is in ERROR-ACTIVE mode. Due to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to STOPPED after a link down: | ip link set dev can0 up | ip link set dev can0 down | ip --details link show can0 | 13: can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can state ERROR-ACTIVE restart-ms 1000 Add missing assignment of CAN_STATE_STOPPED in gs_can_close(). Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/usb/gs_usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index f418066569fc..bd9eb066ecf1 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -1030,6 +1030,8 @@ static int gs_can_close(struct net_device *netdev) usb_kill_anchored_urbs(&dev->tx_submitted); atomic_set(&dev->active_tx_urbs, 0); + dev->can.state = CAN_STATE_STOPPED; + /* reset the device */ rc = gs_cmd_reset(dev); if (rc < 0) --- base-commit: 9efa1a5407e81265ea502cab83be4de503decc49 change-id: 20230718-gs_usb-fix-can-state-ac9247717fe3 Best regards, -- Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
