On Sat, May 09, 2009 at 09:33:40AM -0700, Justin Smith wrote: > Someone please correct me if I am wrong, but I am under the impression > that running a PA with no speakers is in no way harmful. It is similar > to having an electric outlet without anything plugged into it, your > real danger is too heavy a current drain (ie. sticking a fork in the > electric socket, or a low impedance speaker in a speaker jack that > cannot handle that low and impedance). As a previous respondent pointed out, this is basically correct except when the final drive of the amplifier includes a transformer. But check with the designer, e.g. the specifications provided by the manufacturer. They take precedence over public opinion. ;-} A well designed semiconductor amplifier will take into account the possibility of either shorts or open circuit. The design can detect either insufficient current or excessive current, and take corrective action. With a typical eight ohm speaker load this isn't that difficult. Take pity on radiofrequency amplifiers used in radio transmitters, where the load depends on the frequency being used, and a typical antenna looks like a dead short unless it is being driven at close to the right frequency. -- James Cameron mailto:quozl@xxxxxxxxxxxxx http://quozl.netrek.org/ _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
