On 3/10/07, Bibulus <bibulus@xxxxxxx> wrote: <SNIP>
I have exactly the same problem. So I think that a firmware downgrade will solve it. Once again: who know how to downgrade a RME HDSP 9632? And who can send me a old firmware version? [...] Thanks, Bye
For an upgrade or downgrade you have to run the executable "firmware update" program from the RME site. This MUST be run in Windows. Do NOT try it under any form of Linux, Wine or DOS in Linux, etc. It won't work. I doubt I have the file anymore. The best bet is the RME driver archive directory. http://www.rme-audio.com/english/download/drivers_archive.htm I'm not sure what they are supplying here anymore. It's been too long since I've looked. If required I could reboot into Windows and possibly check versions tomorrow. Unfortunately hdspconf under Linux doesn't list the installed firmware version like the Windows version does. If the right version doesn't show up on that page you should write RME support and ask them for a copy of the HDSP firmware update program circa 2004 or 2005. Let them know you are running Linux. I'm sure they can help you get the right version. Note that I haven't touched firmware in a few years as there is no support for any Alsa developer to support these cards and the new firmware. Disappointing, yes, but the cards work very well under Linux with the right version installed. Good luck and I hope this helps, Mark
