Hey there,
You need the snd-rme9652 module. I don't have any of the hdsp stuff
at all (to my knowledge). The contents of the file produced by
"alsactl store -f myconfig.conf" might prove useful once you have the
snd-rme9652 loaded and all that jazz.
I have the 9632 with the daughter I/O cards up and running without
any issues and i also run debian/sid.
Good luck and shout if getting the module in doesn't do the trick.
Folks please feel free to jump in if I'm misleading this poor chap.
It's been a while (fortunately) since I've had to dig into any of this.
rock on.
j.c.w.
http://othertime.com
On Mar 10, 2007, at 10:42 AM, Bibulus wrote:
Hi all,
I just bought a RME HDSP 9632 today but I cannot make it work.
Yes, another guy with this same eternal problem...
I already know that this card is (should be?) well supported under
GNU/Linux (and in fact it is why I bought it)...
My system/conf is:
-----
* Distro: Debian/Sid
* Kernel: vanilla 2.6.20.2 (+ realtime-lsm) with the following
specific
ALSA modules:
RME Hammerfall DSP Audio
RME Digi96, 96/8, 96/8 PRO
RME Digi9652 (Hammerfall)
What is the module I must use for a 9632?
$ lsmod | grep hdsp
snd_hdsp 43812 0
snd_rawmidi 18848 3 snd_seq_virmidi,snd_hdsp,snd_seq_midi
snd_pcm 59908 3 snd_rme96,snd_hdsp,snd_pcm_oss
snd_page_alloc 8328 2 snd_hdsp,snd_pcm
snd_hwdep 7428 1 snd_hdsp
snd 41828 12
snd_seq_virmidi,snd_rme96,snd_hdsp,snd_seq_oss,snd_seq,snd_rawmidi,snd
_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
$ lsmod | grep rme
snd_rme96 20516 0
snd_pcm 59908 3 snd_rme96,snd_hdsp,snd_pcm_oss
snd 41828 12
snd_seq_virmidi,snd_rme96,snd_hdsp,snd_seq_oss,snd_seq,snd_rawmidi,snd
_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
-----
I even try to use "hdsploader", but as far as I understand how it
works,
it is not required for the 9632:
-----
$ hdsploader
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall HDSP 9632 at 0xdcdd0000, irq 16
-----
Do you need more informations/screenshots about my system/conf?
I have installed "alsa-tools" and "alsa-tools-gui" for "hdspmixer" and
"hdspconf".
"alsamixer" give me very poor information (but I have unmutted all I
could unmutted with it).
I have tried to use a ".asoundrc" file, but with no success.
-> Notice that before RME I used to work with a Audigy2 and all was
ok.
But now the only little "sound" I can have is with jack (and only on
playback_9 port, in the headphone left part).
Any idea?
Thanks for your help...
Bye
