SPI & I2C geni driver needs to access struct geni_wrapper, so move it to
header. The drivers needs this header to find the geni device and use it
in dma mapping.
Using this method works for both DT and ACPI systems
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
drivers/soc/qcom/qcom-geni-se.c | 14 --------------
include/linux/qcom-geni-se.h | 14 ++++++++++++++
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index fe666ea0c487..08d645b90ed3 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -78,20 +78,6 @@
*/
#define MAX_CLK_PERF_LEVEL 32
-#define NUM_AHB_CLKS 2
-
-/**
- * struct geni_wrapper - Data structure to represent the QUP Wrapper Core
- * @dev: Device pointer of the QUP wrapper core
- * @base: Base address of this instance of QUP wrapper core
- * @ahb_clks: Handle to the primary & secondary AHB clocks
- * @to_core: Core ICC path
- */
-struct geni_wrapper {
- struct device *dev;
- void __iomem *base;
- struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
-};
static const char * const icc_path_names[] = {"qup-core", "qup-config",
"qup-memory"};
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 5114e2144b17..5fda675c5cfe 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -38,6 +38,20 @@ struct geni_icc_path {
unsigned int avg_bw;
};
+#define NUM_AHB_CLKS 2
+
+/**
+ * @struct geni_wrapper - Data structure to represent the QUP Wrapper Core
+ * @dev: Device pointer of the QUP wrapper core
+ * @base: Base address of this instance of QUP wrapper core
+ * @ahb_clks: Handle to the primary & secondary AHB clocks
+ */
+struct geni_wrapper {
+ struct device *dev;
+ void __iomem *base;
+ struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+};
+
/**
* struct geni_se - GENI Serial Engine
* @base: Base Address of the Serial Engine's register block
--
2.31.1
