GENI_IF_DISABLE_RO is used by geni spi driver as well to check the
status if GENI, so move this to common header qcom-geni-se.h
Also, add FIFO_IF_DISABLE define.
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
drivers/soc/qcom/qcom-geni-se.c | 1 -
include/linux/qcom-geni-se.h | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 5bdfb1565c14..fe666ea0c487 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -104,7 +104,6 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config",
#define GENI_OUTPUT_CTRL 0x24
#define GENI_CGC_CTRL 0x28
#define GENI_CLK_CTRL_RO 0x60
-#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_S_REVISION_RO 0x6c
#define SE_GENI_BYTE_GRAN 0x254
#define SE_GENI_TX_PACKING_CFG0 0x260
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 7c811eebcaab..5114e2144b17 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -63,6 +63,7 @@ struct geni_se {
#define SE_GENI_STATUS 0x40
#define GENI_SER_M_CLK_CFG 0x48
#define GENI_SER_S_CLK_CFG 0x4c
+#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_REVISION_RO 0x68
#define SE_GENI_CLK_SEL 0x7c
#define SE_GENI_DMA_MODE_EN 0x258
@@ -105,6 +106,9 @@ struct geni_se {
#define CLK_DIV_MSK GENMASK(15, 4)
#define CLK_DIV_SHFT 4
+/* GENI_IF_DISABLE_RO fields */
+#define FIFO_IF_DISABLE (BIT(0))
+
/* GENI_FW_REVISION_RO fields */
#define FW_REV_PROTOCOL_MSK GENMASK(15, 8)
#define FW_REV_PROTOCOL_SHFT 8
--
2.31.1
