On 2/13/2025 2:09 PM, Dmitry Baryshkov wrote:
On Thu, Feb 13, 2025 at 01:04:03PM -0800, Anjelique Melendez wrote:
Add support for TEMP_ALARM LITE PMIC peripherals. This subtype
utilizes a pair of registers to configure a warning interrupt
threshold temperature and an automatic hardware shutdown
threshold temperature.
Signed-off-by: David Collins <david.collins@xxxxxxxxxxxxxxxx>
Signed-off-by: Anjelique Melendez <anjelique.melendez@xxxxxxxxxxxxxxxx>
---
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 204 +++++++++++++++++++-
1 file changed, 203 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index a10f368f2039..081db1a85b8a 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -22,6 +22,7 @@
#define QPNP_TM_REG_TYPE 0x04
#define QPNP_TM_REG_SUBTYPE 0x05
#define QPNP_TM_REG_STATUS 0x08
+#define QPNP_TM_REG_IRQ_STATUS 0x10
Is it a generic register or a LITE one?
This is generic register. All temp alarm devices have this IRQ status
register at 0x10 offset but only temp alarm LITE devices read this register
Thanks,
Anjelique
