> Sorry for the confusion, the pin nodes are for the MDIO and MDC, these
> PINs are used by the dedicated hardware MDIO block in the SoC. I will update
> the node name from mux_0 to MDC, mux_1 to MDIO, to make it clear. The driver
> for this node is drivers/net/mdio/mdio-ipq4019.c, it is not related to the
> mdio-mux-* code.
So these is all about pinmux.
When you say:
> PINs are used by the dedicated hardware MDIO block in the SoC
do you actually mean:
PINs are used by the two dedicated hardware MDIO blocks in the SoC.
You have two sets of mdio/mdc configurations here, so i assume there
are two MDIO hardware blocks, each being an MDIO bus master.
Andrew
