Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 10, 2024 at 07:20:56PM +0800, Luo Jie wrote:
> Add the MDIO device tree of ipq5332.
> 
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 44 +++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index bc89480820cb..e6c780e69d6e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -214,6 +214,38 @@ serial_0_pins: serial0-state {
>  				drive-strength = <8>;
>  				bias-pull-up;
>  			};
> +
> +			mdio0_pins: mdio0-state {
> +				mux_0 {
> +					pins = "gpio25";
> +					function = "mdc0";
> +					drive-strength = <8>;
> +					bias-disable;
> +				};
> +
> +				mux_1 {
> +					pins = "gpio26";
> +					function = "mdio0";
> +					drive-strength = <8>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			mdio1_pins: mdio1-state {
> +				mux_0 {
> +					pins = "gpio27";
> +					function = "mdc1";
> +					drive-strength = <8>;
> +					bias-disable;
> +				};
> +
> +				mux_1 {
> +					pins = "gpio28";
> +					function = "mdio1";
> +					drive-strength = <8>;
> +					bias-pull-up;
> +				};

I don't know why i'm asking this, because i don't really expect a
usable answer. What sort of MUX is this? Should you be using one of
the muxes in drivers/net/mdio/mdio-mux-* or something similar?

    Andrew




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux