Thankyou for the comments,
On 11/07/14 13:38, Bartlomiej Zolnierkiewicz wrote:
Hi,
On Wednesday, July 09, 2014 12:04:06 PM Srinivas Kandagatla wrote:
Add a PHY driver for uses with AHCI based SATA controller driver on the
APQ8064 family of SoCs.
This patch is a forward port from Qualcomm's v3.4 andriod kernel.
Android?
yep.
unused define, please remove it
Will fix these instances in next version.
+
+#define UNIPHY_PLL_LOCK BIT(0)
+#define SATA_PHY_TX_CAL BIT(0)
+#define SATA_PHY_RX_CAL BIT(0)
+
+/* default timeout set to 1 sec */
+#define TIMEOUT_MS 10000
+
+struct qcom_apq8064_sata_phy {
+ void __iomem *mmio;
+ struct clk *cfg_clk;
+ struct device *dev;
+};
+
+/* Helper function to do poll and timeout */
+static int read_poll_timeout(void __iomem *addr, u32 mask)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+ u32 val;
+
+ do {
+ cpu_relax();
+ val = readl_relaxed(addr);
+ if (val & mask)
+ break;
+ } while (!time_after(jiffies, timeout));
It would be better to use usleep_[range]() (or even msleep() if needed)
instead of just using cpu_relax().
We really want to poll the register here, usleep/msleep would be useful
if we know already know how much delay is required, but in this case the
its not true.
+
+static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
+{
+ struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
Doesn't this require to use platform_set_drvdata() first in the ->probe
method?
Good spot, I will fix this in next version.
Thanks,
srini
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
