[PATCH v2 0/2] Add Qcom AP8064 SATA PHY support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kishon,

First patch in this series adds support to the APQ8064 SATA PHY.
Second patch updates the existing Kumar gala's device tree PHY bindings
with APQ8064 soc specific compatible.

Eventhough there are two seperate drivers for both IPQ and APQ SOCs,
the bindings are exactly same, so I did not create new bindings document.

Could you please pick these patches for v3.17.

Changes since v1:
	- included DT bindings in the series.

Thanks,
srini

Srinivas Kandagatla (2):
  phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  phy: qcom: Update APQ8064 PHY device tree bindings

 Documentation/devicetree/bindings/phy/qcom-phy.txt |   3 +-
 drivers/phy/Kconfig                                |   7 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-qcom-apq8064-sata.c                | 358 +++++++++++++++++++++
 4 files changed, 368 insertions(+), 1 deletion(-)
 create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux