"Jacques Goldberg" <Jacques.Goldberg@xxxxxxx> escribió:
Juan,
1-In the listing which you have sent, islanis.txt, there is outout
of the first four commands only.
The output for
wvdial | tee -a islanis.txt
here is the missing part
root@ubuntu:/home/juan# wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
-> Sending: ATDT060110
--> Waiting for carrier.
ATDT060110
--> Timed out while dialing. Trying again.
--> Sending: ATDT060110
--> Waiting for carrier.
ATDT060110
is missing.
So I cannot know what happens when you try to connect with wvdial !!!
Also your /etc/wvdial.conf contains a section for /dev/ttySL0
And finally /dev/modem too points to /dev/ttySL0
This ambiguity between ttySL0 and ttyS0 may fool the system.
If wvdial tries to start ttySL0 but it is your TP-LINK that is
connected to the wall, it cannot connect to the phone company, and
this is exactly the problem which you reported.
Please try
1-to remove /dev/modem with command rm/dev/modem
2-to remove the script which starts /dev/ttySL0 if it is still
there. A way to know for sure is the command lsmod which
should NOT show the driver for the other modem (the one you used
before trying to use TP-LINK)
3-to remove /etc/wvdial.conf with command rm /etc/wvdial.conf
4-to run wvdialconf again
5-to edit it for the username, phone number, and password as you have done
6-to start wvdial
ok so, you say that i have to delete /dev/modem and /dev/ttysl0, but
if i delete them, how i'll comunicate with you, because the smartlink
modem is the way that i am using to comunicate with you, if this,
later of this action can not work properly how can i restart de
configuration to send you the other parts,am afraid of that,remember
that i am new in this world,and other peoples said to me that i can
have working some mothems in the same operating system, help please
with a very simple basic /etc/wvdial.conf conaining only ONE modem
, /dev/ttyS0
What you sent definitely shows that the software is recognizing the
TP-LINK modem as expected. Thus, if wvdial fails, it can only be
because the file /etc/wvdial.conf is bad.
This is why I suggested that you rebuild it from the beginning
without adding sophistications.
Jacques
On 07/13/2011 07:53 AM, juan alejandro martines linares wrote
El mié, 13-07-2011 a las 10:59 0300, Jacques Goldberg escribió:
Juan,
Can you please, AFTER HAVING VERIFIED THAT THE TP-LINK MODEM IS
CONNECTED TO PC AND WALL AND POWERED UP, give the five following
commands as superuser (that is becoming su with most Linux
distributions, or prefixing each command with sudo if you use Debian or
Ubuntu or a variation of Ubuntu or any other variation of Debian) ?
They will create one file named islanis.txt
Edit the file by replacing the password by xxx and send me the file. Be
sure not to leave your password visible when sending the file,
ls -l /dev/ttyS*> islanis.txt
ls -l /dev/modem>> islanis.txt
cat /etc/wvdial.conf>> islanis.txt
wvdialconf /etc/wvdial.conf | tee -a islanis.txt
wvdial | tee -a islanis.txt
here is all the requested info, the file islanis.txt
crw-rw---- 1 root dialout 4, 64 2011-07-13 06:45 /dev/ttyS0
crw-rw---- 1 root dialout 4, 65 2011-07-13 06:29 /dev/ttyS1
crw-rw---- 1 root dialout 4, 66 2011-07-13 06:29 /dev/ttyS2
crw-rw---- 1 root dialout 4, 67 2011-07-13 06:29 /dev/ttyS3
lrwxrwxrwx 1 root root 10 2011-07-13 06:29 /dev/ttySL0
-> /dev/pts/0
lrwxrwxrwx 1 root root 6 2011-07-13 06:29 /dev/modem -> ttySL0
[Dialer Defaults]
Init = ATZ
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0
#Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = 060110
Modem = /dev/ttyS0
Username = islanis@xxxxxxxxxxxxxx
#Carrier Check = no
Password = ***********
Baud = 115200
[Dialer interno]
Init = ATZ
Init2 = ATQ0 V1 E1 S0=0 X3&C1&D2 +MS=90
Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = 060110
Modem = /dev/ttySL0
Username = islanis@xxxxxxxxxxxxxx
Carrier Check = no
Password = *************
Baud = 460800
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Found a modem on /dev/ttyS0.
Modem configuration written to /etc/wvdial.conf.
Where you see>> in these commands you MUST type TWO> with no space
between the two
Where you see | in these commands this is a vertical bar on your
keyboard, usually above \ at the RIGHT SIDE of your keyboard.
And please do not write in Spanish - I do not understand Spanish.
ok
Jacques
--
Este mensaje le ha llegado mediante el servicio de correo
electronico que ofrece Infomed para respaldar el cumplimiento de
las misiones del Sistema Nacional de Salud. La persona que envia
este correo asume el compromiso de usar el servicio a tales fines y
cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
--
Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
