Re: TP-LINK External Serial Modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



El mié, 13-07-2011 a las 10:59 +0300, Jacques Goldberg escribió:
> Juan,
> 
> Can you please, AFTER HAVING VERIFIED THAT THE TP-LINK MODEM IS 
> CONNECTED TO PC AND WALL AND POWERED UP, give the  five following 
> commands as superuser (that is becoming su with most Linux 
> distributions, or prefixing each command with sudo if you use Debian or 
> Ubuntu or a variation of Ubuntu or any other variation of Debian) ?
> They will create one file named    islanis.txt
> Edit the file by replacing the password by xxx  and send me the file. Be 
> sure not to leave your  password visible when sending the file,
> 
> ls -l /dev/ttyS* > islanis.txt
> ls -l /dev/modem >>  islanis.txt
> cat /etc/wvdial.conf >>  islanis.txt
> wvdialconf  /etc/wvdial.conf  |  tee  -a  islanis.txt
> wvdial |  tee  -a  islanis.txt


here is all the requested info, the file islanis.txt

crw-rw---- 1 root dialout 4, 64 2011-07-13 06:45 /dev/ttyS0
crw-rw---- 1 root dialout 4, 65 2011-07-13 06:29 /dev/ttyS1
crw-rw---- 1 root dialout 4, 66 2011-07-13 06:29 /dev/ttyS2
crw-rw---- 1 root dialout 4, 67 2011-07-13 06:29 /dev/ttyS3
lrwxrwxrwx 1 root root       10 2011-07-13 06:29 /dev/ttySL0
-> /dev/pts/0
lrwxrwxrwx 1 root root 6 2011-07-13 06:29 /dev/modem -> ttySL0

[Dialer Defaults]
Init = ATZ
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
#Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = 060110
Modem = /dev/ttyS0
Username = islanis@xxxxxxxxxxxxxx
#Carrier Check = no
Password = ***********
Baud = 115200

[Dialer interno]
Init = ATZ
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = 060110
Modem = /dev/ttySL0
Username = islanis@xxxxxxxxxxxxxx
Carrier Check = no
Password = *************
Baud = 460800
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.


Found a modem on /dev/ttyS0.
Modem configuration written to /etc/wvdial.conf.


> 
> Where you see >> in these commands you MUST type  TWO >   with no space 
> between the two
> Where you see |  in these commands  this is a vertical bar on your 
> keyboard, usually above \  at the RIGHT SIDE of your keyboard.
> 
> And please do not write in Spanish - I do not understand Spanish.

ok 


> 
> Jacques
> 




--

Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas

Infomed: http://www.sld.cu/



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux