Jonathan,
No worry here, misunderstanding
Marv,
His system in an i686.
You were mislead by me because I tried (and succeeded) to just compile
the driver under F13 with my own x86_64. Jonathan had reported a
difficulty which was almost certainly due to missing the kernel headers
and source (devel).
Be well
Jacques
On 09/08/2010 07:49 AM, Marvin Stodolsky wrote:
Jonathan,
The ltmodem package will not work on a 64 bit system, because of a
pre-compiled ltmdmobj.o compiled 32 bit.
The martian package will serve. But the martian_modem non-driver
helper must be compiled with 32 bit libraries, as it will contain the
32 bit ltmdmobj.o
The martian_drv.ko driver must be compiled 64 bit, to match your x86_64 kernel.
More help later if needed. Just back from vacation.
MarvS
scanModem maintainer
On Tue, Sep 7, 2010 at 7:28 PM, Jonathan E. Brickman
<jeb@xxxxxxxxxxxxxxx> wrote:
Will do! Thanks!!!
J.E.B.
Jonathan, Antonio:
mea culpa, scanModem ModemData.txt not needed
In Jonathan's initial post (attached file BLDrecord.txt) the modem is
unambiguously identified as 11C1:044C which is a Lucent Mars
scanModem fake 11c1:044c unambigously directs the user to "the most
recent martian" (the quoted one is by the way not the latest).
This is the driver that Jonathan should use not forgetting to install
kernel-headers and kernel-devel if not yet done:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/martian-full-20100123.tar.gz
Read file INSTALL in directory martian-full-20100123 after having
extracted the contents of the file
Jacques
On 09/07/2010 03:31 PM, Antonio Olivares wrote:
Jonathan,
Why don't you try the latest version of ltmodem code available?
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/ltmodem-20100102.tar.gz
or otherwise use martian modem driver?
Are you trying to use it for faxing?
If for any reason, the above package does not work, would you kindly
supply us with ModemData.txt to ensure that the driver that you need
is the one that you are using.
Regards,
Antonio
On Tue, Sep 7, 2010 at 7:03 AM, Jonathan E. Brickman
<jeb@xxxxxxxxxxxxxxx> wrote:
I have Fedora 13, and need to compile the module (or the rpm) from the
ltmodem 8.2* package. It seems to fail because I do not know how to
provide
it with a modversions.h, which in turn seems to be because I cannot run
'make dep' anymore in a kernel tree. Help?
J.E.B.
