Martin Use agrsm06pci-2.1.80-20106 After the # make clean # make read the Makefile with # more Makefile You will thus see that the command needed is: # make modules_install Why the LSI maintainer choose this variant is obscure. MarvS On Sun, May 23, 2010 at 4:32 PM, mwl <mossianin_lbcmi@xxxxxxxxxx> wrote: > I apologize for the slowness of my responses lately. I have been waiting > for PCLinux to release a more current kernel to the ones that we have been > discussing. Now, they have the 2.6.32 kernel and I have upgraded the > problem machine to that kernel and have been re-attempting to get this Agere > 11c1:0630 modem working. > > I started off with what I believe is the most recent driver > (agrsm06pci-2.1.80-20100106) and executed the following commands from the > usr/src directory > > [agrsm06pci-2.1.80~20100106]#make clean > make -C /lib/modules/2.6.32.12-pclos1.bfs/build > M=/usr/src/agrsm06pci-2.1.80~20100106 clean > make[1]: Entering directory `/usr/src/kernel-devel-2.6.32.12-pclos1.bfs' > CLEAN /usr/src/agrsm06pci-2.1.80~20100106/.tmp_versions > CLEAN /usr/src/agrsm06pci-2.1.80~20100106/Module.symvers > /usr/src/agrsm06pci-2.1.80~20100106/Module.markers > /usr/src/agrsm06pci-2.1.80~20100106/modules.order > make[1]: Leaving directory `/usr/src/kernel-devel-2.6.32.12-pclos1.bfs' > > [agrsm06pci-2.1.80~20100106]# make > make -C /lib/modules/2.6.32.12-pclos1.bfs/build > M=/usr/src/agrsm06pci-2.1.80~20100106 modules > make[1]: Entering directory `/usr/src/kernel-devel-2.6.32.12-pclos1.bfs' > CC [M] /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.o > /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function > ‘agr_pci_find_device’: > /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:364: warning: ignoring > return value of ‘pci_enable_device’, declared with attribute > warn_unused_result > /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function > ‘x_linux_dbg_print_crit’: > /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:349: warning: the frame > size of 1540 bytes is larger than 1024 bytes > /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function > ‘x_linux_dbg_print’: > /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:337: warning: the frame > size of 1540 bytes is larger than 1024 bytes > SHIPPED /usr/src/agrsm06pci-2.1.80~20100106/agrmodemlib.o > CC [M] /usr/src/agrsm06pci-2.1.80~20100106/hda.o > CC [M] /usr/src/agrsm06pci-2.1.80~20100106/serial26.o > LD [M] /usr/src/agrsm06pci-2.1.80~20100106/agrmodem.o > LD [M] /usr/src/agrsm06pci-2.1.80~20100106/agrserial.o > Building modules, stage 2. > MODPOST 2 modules > WARNING: could not find > /usr/src/agrsm06pci-2.1.80~20100106/.agrmodemlib.o.cmd for > /usr/src/agrsm06pci-2.1.80~20100106/agrmodemlib.o > CC /usr/src/agrsm06pci-2.1.80~20100106/agrmodem.mod.o > LD [M] /usr/src/agrsm06pci-2.1.80~20100106/agrmodem.ko > CC /usr/src/agrsm06pci-2.1.80~20100106/agrserial.mod.o > LD [M] /usr/src/agrsm06pci-2.1.80~20100106/agrserial.ko > make[1]: Leaving directory `/usr/src/kernel-devel-2.6.32.12-pclos1.bfs' > > [agrsm06pci-2.1.80~20100106]# make install > make: *** No rule to make target `install'. Stop. > > > I also went back to the agrsm06pci-2.1.80-20090825 version of the driver > with the following results. > > make clean > rm -f *.a > rm -f *~ > rm -f agrmodem.o > rm -f agrmodem.ko > rm -f agrmodem.mod.o > rm -f agrmodem.mod.c > rm -f agrserial.o > rm -f agrserial.ko > rm -f agrserial.mod.o > rm -f agrserial.mod.c > rm -f agrsoftmodem.o > rm -f serial26.o > rm -f HDA.o > rm -f hda.o > rm -f modules.order > rm -f Module.symvers > rm -f Module.markers > > [agrsm06pci-2.1.80~20090825]# make > > Run "make install" to install Agere Systems Soft Modem on your system. > Run "make uninstall" to remove a previously installed modem. > > [agrsm06pci-2.1.80~20090825]# make install > ./agrinst > Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0 > some files needed for installation are missing > > > Any help would be appreciated. > > Thanks. > > > On 03/28/2010 02:40 PM, Marvin Stodolsky wrote: >> >> Martin, >> >> RE: /serial26.c:1005: error: ‘struct uart_info’ has no member named ‘port’ >> Vaguely I recall that the fix for this error was included in one of >> the past upgrades. >> Evidently we did not maintain backward compartibility to 2.6.26 >> kernels in doing so. >> >> If the prior variant of agrsm06pci-2.1.80 is not serving under 2.6.26 >> kernels is not doing so either, >> it is simplest just to upgrade to a 2.6.28 kernel+header resources. >> >> I just checked that the agrsm06pci-2.1.80~20100106/ code compiles under >> 2.6.28 >> >> MarvS >> >> >> On Sat, Mar 27, 2010 at 4:25 PM, Martin Lupcke >> <mossianin_lbcmi@xxxxxxxxxx> wrote: >> >>> >>> Just to make sure I was not missing something, I re-executed the commands >>> as >>> suggested by Kenneth. The section below is the results of the three >>> commands. >>> [root@localhost agrsm06pci-2.1.80~20100106]# make clean >>> make -C /lib/modules/2.6.26.8.tex3/build >>> M=/usr/src/agrsm06pci-2.1.80~20100106 clean >>> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3' >>> CLEAN /usr/src/agrsm06pci-2.1.80~20100106/.tmp_versions >>> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3' >>> [root@localhost agrsm06pci-2.1.80~20100106]# make >>> make -C /lib/modules/2.6.26.8.tex3/build >>> M=/usr/src/agrsm06pci-2.1.80~20100106 modules >>> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3' >>> CC [M] /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.o >>> /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function >>> ‘agr_pci_find_device’: >>> /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:364: warning: ignoring >>> return value of ‘pci_enable_device’, declared with attribute >>> warn_unused_result >>> SHIPPED /usr/src/agrsm06pci-2.1.80~20100106/agrmodemlib.o >>> CC [M] /usr/src/agrsm06pci-2.1.80~20100106/hda.o >>> CC [M] /usr/src/agrsm06pci-2.1.80~20100106/serial26.o >>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c: In function >>> ‘receive_chars’: >>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c:1005: error: ‘struct >>> uart_info’ has no member named ‘port’ >>> make[2]: *** [/usr/src/agrsm06pci-2.1.80~20100106/serial26.o] Error 1 >>> make[1]: *** [_module_/usr/src/agrsm06pci-2.1.80~20100106] Error 2 >>> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3' >>> make: *** [default] Error 2 >>> [root@localhost agrsm06pci-2.1.80~20100106]# make install >>> make: *** No rule to make target `install'. Stop. >>> >>> I know Marvin/Nickolay suggested that I would probably need to upgrade to >>> a >>> 2.6.28 kernel, but I thought with sharing these results someone could >>> confirm that need or whether there is something else I could try to get >>> this >>> driver to work with my current 2.6.26 kernel. >>> >>> Thanks for the patience and the help. >>> >>> >>> >>> Keneth W Jones wrote: >>> >>>> >>>> Martin, >>>> If you tried running 'make install' before running 'make' then the error >>>> you received about missing files for the installation makes sense. >>>> The reason I say that is based on the following: >>>> The following sequence of make commands could be used to successfully >>>> 'compile' and 'install': >>>> >>>> (1) make clean >>>> >>>> (2) make >>>> >>>> (3) make install >>>> >>>> Notes: >>>> The 'make clean' command is use to remove the files (the rm commands - >>>> remove/delete commands) created from a previous compile attempt. In >>>> other words, it prepares or cleans the compile directory for the next >>>> compile attempt. >>>> The 'make' command does the actual compiling. Hopefully; it's >>>> successful, and you do not receive an error. Warnings are okay in >>>> compiling, but an error means you did not successfully compile (make) >>>> the modem driver module files (e.g., create the agrmodem.ko and >>>> agrserial.ko modem driver module files). >>>> The 'make install' command actually installs the compiled results (e.g., >>>> copies the newly created modem module driver agrmodem.ko and >>>> agrserial.ko files,) to the required location (a directory) on the >>>> system. The 'make install' command does other necessary actions to the >>>> system for the install; e.g., creates a directory, etc. >>>> >>>> Also, if (2) is unsuccessful, then there is no sense in doing (3). >>>> >>>> I hope the above explanations on the commands used for compiling and >>>> installing clarifies things for you somewhat. >>>> >>>> Now, I turn you back over to the experts of this discussion list. >>>> >>>> Regards, >>>> >>>> Ken >>>> >>>> >>>> >>>> >>>> On Sat, 2010-02-13 at 10:43 -0600, Martin Lupcke wrote: >>>> >>>> >>>>> >>>>> The use of the 20090825 package sounded familiar, but I redownloaded >>>>> the >>>>> file and tried the same steps. >>>>> As per the 1stReadMe.txt file in the 20090825 directory, I tried the >>>>> 'make clean' command. That produced several lines with 'rm' at the >>>>> beginning. rm -f *.a >>>>> rm -f *~ >>>>> rm -f agrmodem.o >>>>> rm -f agrmodem.ko >>>>> rm -f agrmodem.mod.o >>>>> rm -f agrmodem.mod.c >>>>> rm -f agrserial.o >>>>> rm -f agrserial.ko >>>>> rm -f agrserial.mod.o >>>>> rm -f agrserial.mod.c >>>>> rm -f agrsoftmodem.o >>>>> rm -f serial26.o >>>>> rm -f HDA.o >>>>> rm -f hda.o >>>>> rm -f modules.order >>>>> rm -f Module.symvers >>>>> rm -f Module.markers >>>>> >>>>> I then tried the 'make install', but that produced a message about >>>>> missing files shown below: >>>>> ./agrinst >>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0 >>>>> some files needed for installation are missing >>>>> >>>>> Thanks. >>>>> >>>>> >>>>> >>>>> Marvin Stodolsky wrote: >>>>> >>>>> >>>>>> >>>>>> Martin, >>>>>> >>>>>> Per below the compile is successful on my System, for Ubuntu >>>>>> 2.6.28-16-generic resources >>>>>> Please try the preceding package agrsm06pci-2.1.80~20090825.tar.gz , >>>>>> in case there is a backward compatibilty issue for your 2.6.26.8.tex3 >>>>>> resources. >>>>>> >>>>>> MarvS >>>>>> ============== >>>>>> agrsm06pci-2.1.80~20100106# make >>>>>> make -C /lib/modules/2.6.28-16-generic/build >>>>>> M=/usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106 modules >>>>>> make[1]: Entering directory `/usr/src/linux-headers-2.6.28-16-generic' >>>>>> CC [M] >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.o >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In >>>>>> function ‘x_linux_dbg_print_crit’: >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:349: >>>>>> warning: the frame size of 1536 bytes is larger than 1024 bytes >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In >>>>>> function ‘x_linux_dbg_print’: >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:337: >>>>>> warning: the frame size of 1536 bytes is larger than 1024 bytes >>>>>> SHIPPED >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o >>>>>> CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/hda.o >>>>>> CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/serial26.o >>>>>> LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.o >>>>>> LD [M] >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.o >>>>>> Building modules, stage 2. >>>>>> MODPOST 2 modules >>>>>> WARNING: could not find >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/.agrmodemlib.o.cmd >>>>>> for /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o >>>>>> CC >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.mod.o >>>>>> LD [M] >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.ko >>>>>> CC >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.mod.o >>>>>> LD [M] >>>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.ko >>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-16-generic' >>>>>> >>>>>> # ls -l *.ko >>>>>> -rw-r--r-- 1 root staff 1683004 2010-02-12 19:44 agrmodem.ko >>>>>> -rw-r--r-- 1 root staff 26169 2010-02-12 19:44 agrserial.ko >>>>>> ========= >>>>>> >>>>>> On Fri, Feb 12, 2010 at 8:03 PM, Martin Lupcke >>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>> >>>>>> >>>>>>> >>>>>>> I apologize for the delay, but here is what I did and the results. >>>>>>> >>>>>>> --I copied the tar to /usr/src and ran the tar command as noted >>>>>>> below. >>>>>>> --I cd to the new directory >>>>>>> --I ran the make command and got the following message >>>>>>> make -C /lib/modules/2.6.26.8.tex3/build >>>>>>> M=/usr/src/agrsm06pci-2.1.80~20100106 modules >>>>>>> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3' >>>>>>> CC [M] /usr/src/agrsm06pci-2.1.80~20100106/serial26.o >>>>>>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c: In function >>>>>>> ‘receive_chars’: >>>>>>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c:1005: error: ‘struct >>>>>>> uart_info’ has no member named ‘port’ >>>>>>> make[2]: *** [/usr/src/agrsm06pci-2.1.80~20100106/serial26.o] Error 1 >>>>>>> make[1]: *** [_module_/usr/src/agrsm06pci-2.1.80~20100106] Error 2 >>>>>>> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3' >>>>>>> make: *** [default] Error 2 >>>>>>> >>>>>>> I believe that message about "struct_uart_info" is the same that I >>>>>>> got >>>>>>> with >>>>>>> an earlier attempt at this. >>>>>>> The make install failed. I also tried the wvdialconf >>>>>>> /etc/wvdial.conf >>>>>>> and >>>>>>> that failed with a message about not being able to detect the modem. >>>>>>> I am not sure where this leaves the situation. >>>>>>> Any feedback would be appreciated. >>>>>>> >>>>>>> Thanks. >>>>>>> >>>>>>> >>>>>>> Marvin Stodolsky wrote: >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Martin, >>>>>>>> >>>>>>>> After compiling the drivers and installing. >>>>>>>> Run the >>>>>>>> agrsm-test >>>>>>>> >>>>>>>> if successfull, through the included wvdialconf test >>>>>>>> gedit /etc/wvdial.conf >>>>>>>> and try a dialout with: >>>>>>>> $ sudo wvdial >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> On Sun, Jan 10, 2010 at 3:21 PM, Martin Lupcke >>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> Thanks for the update. Because of my limited access to the >>>>>>>>> machine, >>>>>>>>> it >>>>>>>>> will >>>>>>>>> be a few weeks before I can check this. I will keep you posted as >>>>>>>>> soon >>>>>>>>> as I >>>>>>>>> can. >>>>>>>>> I do have a question now: After I cd agrsm08pci-2.1.80-20100106, >>>>>>>>> am >>>>>>>>> I >>>>>>>>> correct in assuming you mean to use wvdial to attempt a connection? >>>>>>>>> >>>>>>>>> >>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Martin, >>>>>>>>>> >>>>>>>>>> We have an update working on the 11c1:0620 chipset through kernels >>>>>>>>>> 2.6.32 >>>>>>>>>> Please check on against your 11c1:0630 hardware. >>>>>>>>>> Martin >>>>>>>>>> >>>>>>>>>> Within the /usr/src/ folder: >>>>>>>>>> # tar zxf agrsm*.tar.gz >>>>>>>>>> # cd agrsm06pci-2.1.80~20100106 >>>>>>>>>> Browse a while. >>>>>>>>>> >>>>>>>>>> Then run: >>>>>>>>>> # ./postinst >>>>>>>>>> and the DKMS system should do the rest of the install. >>>>>>>>>> >>>>>>>>>> Then proceed with modem tests. >>>>>>>>>> >>>>>>>>>> Report back to the list >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sat, Dec 5, 2009 at 4:14 PM, Marvin Stodolsky >>>>>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Martin, >>>>>>>>>>> >>>>>>>>>>> As yet, we don't have an update supporting 11c1:0620 and >>>>>>>>>>> 11c1:0630 >>>>>>>>>>> chipsets >>>>>>>>>>> >>>>>>>>>>> MarvS >>>>>>>>>>> >>>>>>>>>>> On Sat, Dec 5, 2009 at 5:50 PM, Martin Lupcke >>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I have been away for several days and was wondering if there is >>>>>>>>>>>> any >>>>>>>>>>>> further >>>>>>>>>>>> information available. I did some searching, but nothing >>>>>>>>>>>> related >>>>>>>>>>>> to >>>>>>>>>>>> this >>>>>>>>>>>> port error. Considering I would not know what I am looking for >>>>>>>>>>>> anyway.... >>>>>>>>>>>> >>>>>>>>>>>> Thanks. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> re:> The deb file that Marv sent you is for Ubuntu systems and >>>>>>>>>>>>> Not quite. Martin was working from the general tarball. >>>>>>>>>>>>> >>>>>>>>>>>>> Rather the lethal error is here: >>>>>>>>>>>>> serial26.c:983: error: ‘struct uart_info’ has no member named >>>>>>>>>>>>> ‘port’ >>>>>>>>>>>>> --- >>>>>>>>>>>>> I remember an error of this sort in some other code. >>>>>>>>>>>>> Will check into it further later. >>>>>>>>>>>>> >>>>>>>>>>>>> MarvS >>>>>>>>>>>>> >>>>>>>>>>>>> On Sat, Nov 28, 2009 at 5:50 PM, Antonio Olivares >>>>>>>>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Martin, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have achieved success with this 11c1:0620 chipset and Slax. >>>>>>>>>>>>>> I >>>>>>>>>>>>>> have >>>>>>>>>>>>>> a ready built module, if you are willing to get Slax and run >>>>>>>>>>>>>> from >>>>>>>>>>>>>> livecd or usb (Slax 6.1.2) I can send you the lzm module. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The deb file that Marv sent you is for Ubuntu systems and you >>>>>>>>>>>>>> are >>>>>>>>>>>>>> installing it on PCLinuxOS and thus the failure. You might >>>>>>>>>>>>>> want >>>>>>>>>>>>>> to >>>>>>>>>>>>>> try and get the *.tar.gz equivalent file and try the build >>>>>>>>>>>>>> again. >>>>>>>>>>>>>> If >>>>>>>>>>>>>> you decide to do that, please post error messages that you >>>>>>>>>>>>>> might >>>>>>>>>>>>>> get. >>>>>>>>>>>>>> >>>>>>>>>>>>>> If you decide to try Slax, let me know and I can email you the >>>>>>>>>>>>>> lzm >>>>>>>>>>>>>> module and/or slax build script. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 11/28/09, Martin Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> First, Marvin, thank you for your patience with me and this >>>>>>>>>>>>>>> situation. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I checked the agrsm06pci-2.1.80-20090825 folder and the >>>>>>>>>>>>>>> postinst >>>>>>>>>>>>>>> file >>>>>>>>>>>>>>> you mention does not exist. I moved that folder to the >>>>>>>>>>>>>>> /usr/src >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> continued with your alternate commands. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The first command (dkms add) worked successfully. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The second command (dkms build) failed with the screen >>>>>>>>>>>>>>> message >>>>>>>>>>>>>>> Error! Bad return status for module build on kernel: >>>>>>>>>>>>>>> 2.6.26.8.text3 >>>>>>>>>>>>>>> (i586) >>>>>>>>>>>>>>> Consult the make.log in the build directory >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/ for more >>>>>>>>>>>>>>> information >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The contents of that log file are as follows: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ==Begin make.log >>>>>>>>>>>>>>> DKMS make.log for agrsm06pci-2.1.80-20090825 for kernel >>>>>>>>>>>>>>> 2.6.26.8.tex3 >>>>>>>>>>>>>>> (i586) >>>>>>>>>>>>>>> Sat Nov 28 18:25:04 EST 2009 >>>>>>>>>>>>>>> make: Entering directory `/usr/src/linux-2.6.26.8.tex3' >>>>>>>>>>>>>>> LD >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/built-in.o >>>>>>>>>>>>>>> CC [M] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.o >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘agr_pci_find_device’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:360: >>>>>>>>>>>>>>> warning: ignoring return value of ‘pci_enable_device’, >>>>>>>>>>>>>>> declared >>>>>>>>>>>>>>> with >>>>>>>>>>>>>>> attribute warn_unused_result >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_pcibios_read_config_byte’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:388: >>>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>>>>>>>> include/linux/pci.h:516) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_pcibios_read_config_word’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:391: >>>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>>>>>>>> include/linux/pci.h:516) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_pcibios_read_config_dword’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:394: >>>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>>>>>>>> include/linux/pci.h:516) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_pcibios_write_config_byte’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:397: >>>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>>>>>>>> include/linux/pci.h:516) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_pcibios_write_config_word’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:400: >>>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>>>>>>>> include/linux/pci.h:516) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_pcibios_write_config_dword’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:403: >>>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>>>>>>>> include/linux/pci.h:516) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_task_queue_init’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:442: >>>>>>>>>>>>>>> warning: assignment from incompatible pointer type >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: >>>>>>>>>>>>>>> In >>>>>>>>>>>>>>> function ‘x_task_queue_init_usb’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:454: >>>>>>>>>>>>>>> warning: assignment from incompatible pointer type >>>>>>>>>>>>>>> CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.o >>>>>>>>>>>>>>> In file included from >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:13: >>>>>>>>>>>>>>> include/sound/driver.h:1:2: warning: #warning "This file is >>>>>>>>>>>>>>> deprecated" >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> function declaration isn’t a prototype >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:307: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> function declaration isn’t a prototype >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:314: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> function declaration isn’t a prototype >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘LnxTransferCodecVerbs’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:323: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> unused variable ‘CodecAddress’ >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘LnxTransferCodecVerbsWrite’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:344: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> unused variable ‘CodecAddress’ >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘findHDACodec’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:282: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> control reaches end of non-void function >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘GetHDABaseAddress’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> control reaches end of non-void function >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘getHDAStream’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:279: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> control reaches end of non-void function >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘LnxTransferCodecVerbs’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:340: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> ‘rvalue’ is used uninitialized in this function >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘LnxTransferCodecVerbsWrite’: >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:361: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> ‘rvalue’ is used uninitialized in this function >>>>>>>>>>>>>>> CC [M] >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘receive_chars’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:983: >>>>>>>>>>>>>>> error: >>>>>>>>>>>>>>> ‘struct uart_info’ has no member named ‘port’ >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘serial8250_startup’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1434: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> assignment from incompatible pointer type >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> ‘serial8250_set_termios’: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> passing argument 2 of ‘uart_get_baud_rate’ from incompatible >>>>>>>>>>>>>>> pointer >>>>>>>>>>>>>>> type >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> passing argument 3 of ‘uart_get_baud_rate’ from incompatible >>>>>>>>>>>>>>> pointer >>>>>>>>>>>>>>> type >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: At >>>>>>>>>>>>>>> top >>>>>>>>>>>>>>> level: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2115: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> initialization from incompatible pointer type >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2116: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> initialization from incompatible pointer type >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2123: >>>>>>>>>>>>>>> warning: >>>>>>>>>>>>>>> initialization from incompatible pointer type >>>>>>>>>>>>>>> make[1]: *** >>>>>>>>>>>>>>> [/var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o] >>>>>>>>>>>>>>> Error 1 >>>>>>>>>>>>>>> make: *** >>>>>>>>>>>>>>> [_module_/var/lib/dkms/agrsm06pci/2.1.80-20090825/build] >>>>>>>>>>>>>>> Error >>>>>>>>>>>>>>> 2 >>>>>>>>>>>>>>> make: Leaving directory `/usr/src/linux-2.6.26.8.tex3' >>>>>>>>>>>>>>> ==End make.log >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Can you offer any further help? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Martin >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This is a postinst file in your >>>>>>>>>>>>>>>> /usr/src/agrsm06pci-2.1.80-20090825 >>>>>>>>>>>>>>>> folder >>>>>>>>>>>>>>>> if the agrsm06pci-2.1.80-20090825 folder is not in /usr/src/ >>>>>>>>>>>>>>>> , >>>>>>>>>>>>>>>> move >>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>> there. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Then with root permisssion, run >>>>>>>>>>>>>>>> # ./postinst >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> or alternately the following commands; >>>>>>>>>>>>>>>> VER=2.1.80~20090825 >>>>>>>>>>>>>>>> dkms add -m agrsm06pci -v $VER >>>>>>>>>>>>>>>> dkms build -m agrsm06pci -v $VER >>>>>>>>>>>>>>>> dkms install -m agrsm06pci -v $VER >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If all successful >>>>>>>>>>>>>>>> # agrsm-test >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> When you upgade to a new kernel, the dksm will automatically >>>>>>>>>>>>>>>> compile >>>>>>>>>>>>>>>> the matching kernels. >>>>>>>>>>>>>>>> provided that the linux-headers for the new kernel are also >>>>>>>>>>>>>>>> installed. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Fri, Nov 27, 2009 at 10:36 AM, Martin Lupcke >>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Just to clarify, I am not sending these messages from the >>>>>>>>>>>>>>>>> machine >>>>>>>>>>>>>>>>> on >>>>>>>>>>>>>>>>> which I >>>>>>>>>>>>>>>>> am trying to install this driver. If I need to install >>>>>>>>>>>>>>>>> anything, >>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>> be able to download from another machine and transfer via >>>>>>>>>>>>>>>>> thumb >>>>>>>>>>>>>>>>> drive, >>>>>>>>>>>>>>>>> etc. >>>>>>>>>>>>>>>>> Second, I just noticed that somehow the Ubuntu Linux got >>>>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>> message and may be confusing. I am not running Ubuntu, I >>>>>>>>>>>>>>>>> am >>>>>>>>>>>>>>>>> running >>>>>>>>>>>>>>>>> PCLinuxOS2009. >>>>>>>>>>>>>>>>> I already downloaded the deb file you mentioned. When I >>>>>>>>>>>>>>>>> try >>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>> install >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>> driver with the dpkg command you provided earlier, I get a >>>>>>>>>>>>>>>>> message >>>>>>>>>>>>>>>>> about >>>>>>>>>>>>>>>>> command not found. This is not making sense to me since it >>>>>>>>>>>>>>>>> appears >>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>> dkms is already installed, based on the list of packages >>>>>>>>>>>>>>>>> installed >>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>> Package Manager. All packages related to dkms are shown as >>>>>>>>>>>>>>>>> installed. >>>>>>>>>>>>>>>>> So, I am confused. I cannot install the dkms without a >>>>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>> cannot >>>>>>>>>>>>>>>>> install the modem driver without dkms. To top it off, it >>>>>>>>>>>>>>>>> appears >>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>> dkms >>>>>>>>>>>>>>>>> is already installed. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Is there a source for dkms that I can download from another >>>>>>>>>>>>>>>>> mashine? >>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>> try to reinstall dkms from that, if you think it would >>>>>>>>>>>>>>>>> help. >>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825_i386.deb is at >>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>>>>>>>>>>>>>>>> but first install the dkms package, which will direct the >>>>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>>>> compilation and installation. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke >>>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I feel like I am missing something somewhere. >>>>>>>>>>>>>>>>>>> I originally downloaded the file >>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825.tar.gz. >>>>>>>>>>>>>>>>>>> After >>>>>>>>>>>>>>>>>>> unpacking, there are no *.deb files. >>>>>>>>>>>>>>>>>>> So, I rechecked and found >>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825_i386.deb >>>>>>>>>>>>>>>>>>> which >>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>> just >>>>>>>>>>>>>>>>>>> downloaded and tried to install with your directions. >>>>>>>>>>>>>>>>>>> Now >>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>> get >>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>> "command >>>>>>>>>>>>>>>>>>> not found" message when attempting to do the dpkg command >>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>> provided. >>>>>>>>>>>>>>>>>>> As near as I can tell, the dkms is installed on the >>>>>>>>>>>>>>>>>>> machine. I >>>>>>>>>>>>>>>>>>> say >>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>> because all dkms-related items in the Package Manager >>>>>>>>>>>>>>>>>>> (PCLinux2009) >>>>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>>>> listed as installed. >>>>>>>>>>>>>>>>>>> I am beginning to think I am in a doom-loop. I cannot >>>>>>>>>>>>>>>>>>> install >>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>>>>> with dpkg, and I cannot connect to the internet to update >>>>>>>>>>>>>>>>>>> any >>>>>>>>>>>>>>>>>>> packages >>>>>>>>>>>>>>>>>>> because dial-up is my only means of connecting. >>>>>>>>>>>>>>>>>>> Any guidance would be appreciated. >>>>>>>>>>>>>>>>>>> Thanks for your efforts. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Martin, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Don't use the agrinst. FIrst install the dkms package, >>>>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>> haven't >>>>>>>>>>>>>>>>>>>> already. >>>>>>>>>>>>>>>>>>>> Then start the install with >>>>>>>>>>>>>>>>>>>> $ sudo dpkg -i agrsm*.deb >>>>>>>>>>>>>>>>>>>> and the dkms system will take over. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> With the agrsm-tools.deb package previously installed, >>>>>>>>>>>>>>>>>>>> then >>>>>>>>>>>>>>>>>>>> run >>>>>>>>>>>>>>>>>>>> $ sudo agrsm-test >>>>>>>>>>>>>>>>>>>> for detection of your modem. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke >>>>>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I used the "find" command as you provided and found two >>>>>>>>>>>>>>>>>>>>> entries >>>>>>>>>>>>>>>>>>>>> which >>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>> deleted. I then went to install the >>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825 >>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>> received >>>>>>>>>>>>>>>>>>>>> the following results: >>>>>>>>>>>>>>>>>>>>> ./agrinst >>>>>>>>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red >>>>>>>>>>>>>>>>>>>>> Flag >>>>>>>>>>>>>>>>>>>>> NE >>>>>>>>>>>>>>>>>>>>> 5.0 >>>>>>>>>>>>>>>>>>>>> some files needed for installation are missing >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I stopped there and dropped this note for help. >>>>>>>>>>>>>>>>>>>>> \Thanks. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Martin, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package >>>>>>>>>>>>>>>>>>>>>> which >>>>>>>>>>>>>>>>>>>>>> may >>>>>>>>>>>>>>>>>>>>>> provide service for the 11c1:0630 chipset >>>>>>>>>>>>>>>>>>>>>> Best check that multiple driver sets are not installed >>>>>>>>>>>>>>>>>>>>>> somewhere: >>>>>>>>>>>>>>>>>>>>>> $ find /lib/modules/$(uname -r) -name agr*.ko >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> If there are multiple. Best delete all and rerun the >>>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install. >>>>>>>>>>>>>>>>>>>>>> If this was not the last installed delete all and >>>>>>>>>>>>>>>>>>>>>> rerun >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> It is not clear from your message below as to whether >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>>>>> package is installed or not. >>>>>>>>>>>>>>>>>>>>>> If not, from the bottom of >>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ >>>>>>>>>>>>>>>>>>>>>> get the wvdial_jaunty_i386.zip >>>>>>>>>>>>>>>>>>>>>> Under Linux >>>>>>>>>>>>>>>>>>>>>> $ unzip wv*.zip >>>>>>>>>>>>>>>>>>>>>> $ cd wvdial_jaunty_i386 >>>>>>>>>>>>>>>>>>>>>> $ ls >>>>>>>>>>>>>>>>>>>>>> install with >>>>>>>>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Then rerun the >>>>>>>>>>>>>>>>>>>>>> $ sudo agrsm-test >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> If successful, it will write a file /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>>>> Edit >>>>>>>>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>>>>>>>> with: >>>>>>>>>>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>>>> putting in personal info while deleting symbols:< > >>>>>>>>>>>>>>>>>>>>>> ; >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Then try a dialout with: >>>>>>>>>>>>>>>>>>>>>> $ sudo wvdial >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Upon a reboot the modem will be set up by: >>>>>>>>>>>>>>>>>>>>>> $ sudo modprobe agrserial >>>>>>>>>>>>>>>>>>>>>> You can check porsts with: >>>>>>>>>>>>>>>>>>>>>> $ ls -l /dev/AGR* /dev/SAGR >>>>>>>>>>>>>>>>>>>>>> and for driver loading: >>>>>>>>>>>>>>>>>>>>>> $ lsmod | grep agr >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Once you are online under Linux install the dkms >>>>>>>>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>>>>>>>> update >>>>>>>>>>>>>>>>>>>>>> utility >>>>>>>>>>>>>>>>>>>>>> with: >>>>>>>>>>>>>>>>>>>>>> $ sudo apt-get update >>>>>>>>>>>>>>>>>>>>>> $ sudo apt-get install dkms >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke >>>>>>>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Several weeks ago, I sent a message back that I had >>>>>>>>>>>>>>>>>>>>>>> tried a >>>>>>>>>>>>>>>>>>>>>>> couple >>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>>>>>>>>> packages to get my 11c1:0630 modem working. >>>>>>>>>>>>>>>>>>>>>>> Unfortunately, >>>>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>> lost >>>>>>>>>>>>>>>>>>>>>>> track since then. This is what I reported at that >>>>>>>>>>>>>>>>>>>>>>> time. >>>>>>>>>>>>>>>>>>>>>>> I attempted to install the "agrsm-2.1.80limited" >>>>>>>>>>>>>>>>>>>>>>> driver. >>>>>>>>>>>>>>>>>>>>>>> The >>>>>>>>>>>>>>>>>>>>>>> results >>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>> install are shown below: >>>>>>>>>>>>>>>>>>>>>>> ./agrinst >>>>>>>>>>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red >>>>>>>>>>>>>>>>>>>>>>> Flag >>>>>>>>>>>>>>>>>>>>>>> NE >>>>>>>>>>>>>>>>>>>>>>> 5.0 >>>>>>>>>>>>>>>>>>>>>>> some files needed for installation are missing >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> For kicks, I ran the agrsm-test. The results of that >>>>>>>>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>>>>>>>> listed >>>>>>>>>>>>>>>>>>>>>>> below: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Loading drivers: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Drivers loaded: >>>>>>>>>>>>>>>>>>>>>>> agrserial 11088 0 >>>>>>>>>>>>>>>>>>>>>>> agrmodem 1184932 1 agrserial >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> and symbolic link created: >>>>>>>>>>>>>>>>>>>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR >>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>> /dev/ttyAGS3 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Checking for utility wvdialconf >>>>>>>>>>>>>>>>>>>>>>> Found /usr/bin/wvdialconf, preparing to run: >>>>>>>>>>>>>>>>>>>>>>> wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> A reboot may be necessary before modem detection >>>>>>>>>>>>>>>>>>>>>>> through: >>>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrserial >>>>>>>>>>>>>>>>>>>>>>> Which will load agrmodem, agrserial and create the >>>>>>>>>>>>>>>>>>>>>>> symbolic >>>>>>>>>>>>>>>>>>>>>>> link >>>>>>>>>>>>>>>>>>>>>>> needed >>>>>>>>>>>>>>>>>>>>>>> for: >>>>>>>>>>>>>>>>>>>>>>> sudo wvdialconf >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I also tried to install the >>>>>>>>>>>>>>>>>>>>>>> "agrsm06pci-2.1.80~20090825" >>>>>>>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>> same >>>>>>>>>>>>>>>>>>>>>>> result as above. >>>>>>>>>>>>>>>>>>>>>>> Can you walk me thru what needs to be done now? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thanks for all the help. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Jacques Goldberg wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> DONE but Martin the complete URL is >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to >>>>>>>>>>>>>>>>>>>>>>>> show >>>>>>>>>>>>>>>>>>>>>>>> how >>>>>>>>>>>>>>>>>>>>>>>> one >>>>>>>>>>>>>>>>>>>>>>>> unpacks >>>>>>>>>>>>>>>>>>>>>>>> such >>>>>>>>>>>>>>>>>>>>>>>> a kind of file). >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Martin >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Attached is the tarball packaging. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> # tar zxvf agrsm.tar.gz >>>>>>>>>>>>>>>>>>>>>>>>> and see the 1stReadme.txt therein. >>>>>>>>>>>>>>>>>>>>>>>>> If you are not using the Deb installer previously >>>>>>>>>>>>>>>>>>>>>>>>> sent, >>>>>>>>>>>>>>>>>>>>>>>>> the best place to unpack it is in /usr/src/ to >>>>>>>>>>>>>>>>>>>>>>>>> potentially >>>>>>>>>>>>>>>>>>>>>>>>> enable >>>>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>> dkms support. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Jacques, >>>>>>>>>>>>>>>>>>>>>>>>> put in the 11c11040 folder please. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin >>>>>>>>>>>>>>>>>>>>>>>>> Stodolsky<marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/ >>>>>>>>>>>>>>>>>>>>>>>>>> is the correct address, but the server seems to be >>>>>>>>>>>>>>>>>>>>>>>>>> offline >>>>>>>>>>>>>>>>>>>>>>>>>> now. >>>>>>>>>>>>>>>>>>>>>>>>>> This happens occassional >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> John >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>>>>>>>>>>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>> correct address. I'll also send you the Debian >>>>>>>>>>>>>>>>>>>>>>>>>> installer >>>>>>>>>>>>>>>>>>>>>>>>>> variant >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin >>>>>>>>>>>>>>>>>>>>>>>>>> Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I have been trying to follow the recent messages >>>>>>>>>>>>>>>>>>>>>>>>>>> on >>>>>>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>>> 11c1:0620 >>>>>>>>>>>>>>>>>>>>>>>>>>> & >>>>>>>>>>>>>>>>>>>>>>>>>>> 0630 >>>>>>>>>>>>>>>>>>>>>>>>>>> modems. On the 24th, Jacques put a file at >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz >>>>>>>>>>>>>>>>>>>>>>>>>>> but I cannot find it. (The path 11c11040 does >>>>>>>>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>>>>>>>> appear >>>>>>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>>>>>>> exist.) >>>>>>>>>>>>>>>>>>>>>>>>>>> Later, it seems like there were additional steps >>>>>>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>>>>>>> install >>>>>>>>>>>>>>>>>>>>>>>>>>> this, >>>>>>>>>>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>>>>>>>>>> I got >>>>>>>>>>>>>>>>>>>>>>>>>>> totally lost trying to determine what should or >>>>>>>>>>>>>>>>>>>>>>>>>>> should >>>>>>>>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>>>>>>>> done. >>>>>>>>>>>>>>>>>>>>>>>>>>> Most >>>>>>>>>>>>>>>>>>>>>>>>>>> recently (below), it seems that John got an 0620 >>>>>>>>>>>>>>>>>>>>>>>>>>> working >>>>>>>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu. >>>>>>>>>>>>>>>>>>>>>>>>>>> I am far from a Linux expert (obviously), but >>>>>>>>>>>>>>>>>>>>>>>>>>> could >>>>>>>>>>>>>>>>>>>>>>>>>>> someone >>>>>>>>>>>>>>>>>>>>>>>>>>> help >>>>>>>>>>>>>>>>>>>>>>>>>>> clear >>>>>>>>>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>>>>>>>>> up for me so I can try to get my 0630 working in >>>>>>>>>>>>>>>>>>>>>>>>>>> PCLinux? >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> john31608@xxxxxxxxxx wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Marvin: >>>>>>>>>>>>>>>>>>>>>>>>>>>> I want you to know I have the agere SV92PP >>>>>>>>>>>>>>>>>>>>>>>>>>>> 11c10620 >>>>>>>>>>>>>>>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>>>>>>>>>>>>>>> card >>>>>>>>>>>>>>>>>>>>>>>>>>>> now >>>>>>>>>>>>>>>>>>>>>>>>>>>> running reliably. I went with a fresh reinstall >>>>>>>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu9.04 >>>>>>>>>>>>>>>>>>>>>>>>>>>> Jaunty >>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>> installation of the following: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-tools_0.0.1_all.deb >>>>>>>>>>>>>>>>>>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb >>>>>>>>>>>>>>>>>>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb >>>>>>>>>>>>>>>>>>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a >>>>>>>>>>>>>>>>>>>>>>>>>>>> package >>>>>>>>>>>>>>>>>>>>>>>>>>>> consisting >>>>>>>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>>>>>>>>>>> with dependencies >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> It was all double click and go with >>>>>>>>>>>>>>>>>>>>>>>>>>>> installation >>>>>>>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrmodem.ko >>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrserial.ko to >>>>>>>>>>>>>>>>>>>>>>>>>>>> /lib/modules/2.6.28-11-generic/updates/dkms >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> It looks like at this point from the terminal >>>>>>>>>>>>>>>>>>>>>>>>>>>> sudo >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test >>>>>>>>>>>>>>>>>>>>>>>>>>>> would >>>>>>>>>>>>>>>>>>>>>>>>>>>> have taken me to completion save for entering my >>>>>>>>>>>>>>>>>>>>>>>>>>>> name, >>>>>>>>>>>>>>>>>>>>>>>>>>>> password >>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>> phone >>>>>>>>>>>>>>>>>>>>>>>>>>>> number in ./etc/wvdial.conf. Everything is >>>>>>>>>>>>>>>>>>>>>>>>>>>> spelled >>>>>>>>>>>>>>>>>>>>>>>>>>>> out >>>>>>>>>>>>>>>>>>>>>>>>>>>> as >>>>>>>>>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>>>>>>>> go >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> I had tried after running >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm06pci_2.1.80~20090825_i386.deb >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrmodem >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrserial >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> etc, etc using the page "LSI/AgereSystems >>>>>>>>>>>>>>>>>>>>>>>>>>>> 11c11040 >>>>>>>>>>>>>>>>>>>>>>>>>>>> chipset >>>>>>>>>>>>>>>>>>>>>>>>>>>> support >>>>>>>>>>>>>>>>>>>>>>>>>>>> installation ,using dkms tools" from the >>>>>>>>>>>>>>>>>>>>>>>>>>>> Linmodems >>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion >>>>>>>>>>>>>>>>>>>>>>>>>>>> board >>>>>>>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to >>>>>>>>>>>>>>>>>>>>>>>>>>>> find >>>>>>>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>>>> file >>>>>>>>>>>>>>>>>>>>>>>>>>>> wvtest. >>>>>>>>>>>>>>>>>>>>>>>>>>>> sudo >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test rescued me. The modem was found on >>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/ttySAGR. >>>>>>>>>>>>>>>>>>>>>>>>>>>> While >>>>>>>>>>>>>>>>>>>>>>>>>>>> trying >>>>>>>>>>>>>>>>>>>>>>>>>>>> to configure the network tools point to point >>>>>>>>>>>>>>>>>>>>>>>>>>>> connection >>>>>>>>>>>>>>>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>>>>>>>>> lost >>>>>>>>>>>>>>>>>>>>>>>>>>>> the connection and it appears the file >>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/ttySAGR >>>>>>>>>>>>>>>>>>>>>>>>>>>> was >>>>>>>>>>>>>>>>>>>>>>>>>>>> lost >>>>>>>>>>>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>>>>>>>>>>> sudo >>>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test brought it right back. I then had to >>>>>>>>>>>>>>>>>>>>>>>>>>>> reenter >>>>>>>>>>>>>>>>>>>>>>>>>>>> my >>>>>>>>>>>>>>>>>>>>>>>>>>>> name, >>>>>>>>>>>>>>>>>>>>>>>>>>>> phone >>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>> PW but it all went pretty smoothly. My hat is >>>>>>>>>>>>>>>>>>>>>>>>>>>> off >>>>>>>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>>>> others >>>>>>>>>>>>>>>>>>>>>>>>>>>> who >>>>>>>>>>>>>>>>>>>>>>>>>>>> have been so patient with all this. Thank You >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Yours truly, John W >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>> >>>> >>>> >>> >>> >> >> > >
