Re: agrsm06pci-2.1.80-20090106

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin,

RE: /serial26.c:1005: error: ‘struct uart_info’ has no member named ‘port’
Vaguely I recall that the fix for this error was included in one of
the past upgrades.
Evidently we did not maintain backward compartibility to 2.6.26
kernels in doing so.

If the prior variant of agrsm06pci-2.1.80 is not serving under 2.6.26
kernels is not doing so either,
it is simplest just to upgrade to a 2.6.28 kernel+header resources.

I just checked that the  agrsm06pci-2.1.80~20100106/  code compiles under 2.6.28

MarvS


On Sat, Mar 27, 2010 at 4:25 PM, Martin Lupcke
<mossianin_lbcmi@xxxxxxxxxx> wrote:
> Just to make sure I was not missing something, I re-executed the commands as
> suggested by Kenneth.  The section below is the results of the three
> commands.
> [root@localhost agrsm06pci-2.1.80~20100106]# make clean
> make -C /lib/modules/2.6.26.8.tex3/build
> M=/usr/src/agrsm06pci-2.1.80~20100106 clean
> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3'
>  CLEAN   /usr/src/agrsm06pci-2.1.80~20100106/.tmp_versions
> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
> [root@localhost agrsm06pci-2.1.80~20100106]# make
> make -C /lib/modules/2.6.26.8.tex3/build
> M=/usr/src/agrsm06pci-2.1.80~20100106 modules
> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3'
>  CC [M]  /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.o
> /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function
> ‘agr_pci_find_device’:
> /usr/src/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:364: warning: ignoring
> return value of ‘pci_enable_device’, declared with attribute
> warn_unused_result
>  SHIPPED /usr/src/agrsm06pci-2.1.80~20100106/agrmodemlib.o
>  CC [M]  /usr/src/agrsm06pci-2.1.80~20100106/hda.o
>  CC [M]  /usr/src/agrsm06pci-2.1.80~20100106/serial26.o
> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c: In function ‘receive_chars’:
> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c:1005: error: ‘struct
> uart_info’ has no member named ‘port’
> make[2]: *** [/usr/src/agrsm06pci-2.1.80~20100106/serial26.o] Error 1
> make[1]: *** [_module_/usr/src/agrsm06pci-2.1.80~20100106] Error 2
> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
> make: *** [default] Error 2
> [root@localhost agrsm06pci-2.1.80~20100106]# make install
> make: *** No rule to make target `install'.  Stop.
>
> I know Marvin/Nickolay suggested that I would probably need to upgrade to a
> 2.6.28 kernel, but I thought with sharing these results someone could
> confirm that need or whether there is something else I could try to get this
> driver to work with my current 2.6.26 kernel.
>
> Thanks for the patience and the help.
>
>
>
> Keneth W Jones wrote:
>>
>> Martin,
>> If you tried running 'make install' before running 'make' then the error
>> you received about missing files for the installation makes sense.
>> The reason I say that is based on the following:
>> The following sequence of make commands could be used to successfully
>> 'compile' and 'install':
>>
>> (1) make clean
>>
>> (2) make
>>
>> (3) make install
>>
>> Notes:
>> The 'make clean' command is use to remove the files (the rm commands -
>> remove/delete commands) created from a previous compile attempt.  In
>> other words, it prepares or cleans the compile directory for the next
>> compile attempt.
>> The 'make' command does the actual compiling.  Hopefully; it's
>> successful, and you do not receive an error.  Warnings are okay in
>> compiling, but an error means you did not successfully compile (make)
>> the modem driver module files (e.g., create the agrmodem.ko and
>> agrserial.ko modem driver module files).
>> The 'make install' command actually installs the compiled results (e.g.,
>> copies the newly created modem module driver agrmodem.ko and
>> agrserial.ko files,) to the required location (a directory) on the
>> system.  The 'make install' command does other necessary actions to the
>> system for the install; e.g., creates a directory, etc.
>>
>> Also, if (2) is unsuccessful, then there is no sense in doing (3).
>>
>> I hope the above explanations on the commands used for compiling and
>> installing clarifies things for you somewhat.
>>
>> Now, I turn you back over to the experts of this discussion list.
>>
>> Regards,
>>
>> Ken
>>
>>
>>
>>
>> On Sat, 2010-02-13 at 10:43 -0600, Martin Lupcke wrote:
>>
>>>
>>> The use of the 20090825 package sounded familiar, but I redownloaded the
>>> file and tried the same steps.
>>> As per the 1stReadMe.txt file in the 20090825 directory, I tried the
>>> 'make clean' command.  That produced several lines with 'rm' at the
>>> beginning. rm -f *.a
>>> rm -f *~
>>> rm -f agrmodem.o
>>> rm -f agrmodem.ko
>>> rm -f agrmodem.mod.o
>>> rm -f agrmodem.mod.c
>>> rm -f agrserial.o
>>> rm -f agrserial.ko
>>> rm -f agrserial.mod.o
>>> rm -f agrserial.mod.c
>>> rm -f agrsoftmodem.o
>>> rm -f serial26.o
>>> rm -f HDA.o
>>> rm -f hda.o
>>> rm -f modules.order
>>> rm -f Module.symvers
>>> rm -f Module.markers
>>>
>>> I then tried the 'make install', but that produced a message about
>>> missing files shown below:
>>> ./agrinst
>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>> some files needed for installation are missing
>>>
>>> Thanks.
>>>
>>>
>>>
>>> Marvin Stodolsky wrote:
>>>
>>>>
>>>> Martin,
>>>>
>>>> Per below the compile is successful on my System, for Ubuntu
>>>> 2.6.28-16-generic resources
>>>> Please try the preceding package agrsm06pci-2.1.80~20090825.tar.gz ,
>>>> in case there is a backward compatibilty issue for your 2.6.26.8.tex3
>>>> resources.
>>>>
>>>> MarvS
>>>> ==============
>>>> agrsm06pci-2.1.80~20100106# make
>>>> make -C /lib/modules/2.6.28-16-generic/build
>>>> M=/usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106 modules
>>>> make[1]: Entering directory `/usr/src/linux-headers-2.6.28-16-generic'
>>>>  CC [M]
>>>>  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.o
>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In
>>>> function ‘x_linux_dbg_print_crit’:
>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:349:
>>>> warning: the frame size of 1536 bytes is larger than 1024 bytes
>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In
>>>> function ‘x_linux_dbg_print’:
>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:337:
>>>> warning: the frame size of 1536 bytes is larger than 1024 bytes
>>>>  SHIPPED
>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o
>>>>  CC [M]  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/hda.o
>>>>  CC [M]  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/serial26.o
>>>>  LD [M]  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.o
>>>>  LD [M]  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.o
>>>>  Building modules, stage 2.
>>>>  MODPOST 2 modules
>>>> WARNING: could not find
>>>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/.agrmodemlib.o.cmd
>>>> for /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o
>>>>  CC
>>>>  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.mod.o
>>>>  LD [M]  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.ko
>>>>  CC
>>>>  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.mod.o
>>>>  LD [M]  /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.ko
>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-16-generic'
>>>>
>>>> # ls -l *.ko
>>>> -rw-r--r-- 1 root staff 1683004 2010-02-12 19:44 agrmodem.ko
>>>> -rw-r--r-- 1 root staff   26169 2010-02-12 19:44 agrserial.ko
>>>>  =========
>>>>
>>>> On Fri, Feb 12, 2010 at 8:03 PM, Martin Lupcke
>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>
>>>>>
>>>>> I apologize for the delay, but here is what I did and the results.
>>>>>
>>>>> --I copied the tar to /usr/src and ran the tar command as noted below.
>>>>> --I cd to the new directory
>>>>> --I ran the make command and got the following message
>>>>> make -C /lib/modules/2.6.26.8.tex3/build
>>>>> M=/usr/src/agrsm06pci-2.1.80~20100106 modules
>>>>> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3'
>>>>>  CC [M]  /usr/src/agrsm06pci-2.1.80~20100106/serial26.o
>>>>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c: In function
>>>>> ‘receive_chars’:
>>>>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c:1005: error: ‘struct
>>>>> uart_info’ has no member named ‘port’
>>>>> make[2]: *** [/usr/src/agrsm06pci-2.1.80~20100106/serial26.o] Error 1
>>>>> make[1]: *** [_module_/usr/src/agrsm06pci-2.1.80~20100106] Error 2
>>>>> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
>>>>> make: *** [default] Error 2
>>>>>
>>>>> I believe that message about "struct_uart_info" is the same that I got
>>>>> with
>>>>> an earlier attempt at this.
>>>>> The make install failed.  I also tried the wvdialconf /etc/wvdial.conf
>>>>> and
>>>>> that failed with a message about not being able to detect the modem.
>>>>> I am not sure where this leaves the situation.
>>>>> Any feedback would be appreciated.
>>>>>
>>>>> Thanks.
>>>>>
>>>>>
>>>>> Marvin Stodolsky wrote:
>>>>>
>>>>>>
>>>>>> Martin,
>>>>>>
>>>>>> After compiling the drivers and installing.
>>>>>> Run the
>>>>>>  agrsm-test
>>>>>>
>>>>>> if successfull, through the included wvdialconf  test
>>>>>>  gedit /etc/wvdial.conf
>>>>>> and try a dialout with:
>>>>>> $ sudo wvdial
>>>>>>
>>>>>> MarvS
>>>>>>
>>>>>> On Sun, Jan 10, 2010 at 3:21 PM, Martin Lupcke
>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> Thanks for the update.  Because of my limited access to the machine,
>>>>>>> it
>>>>>>> will
>>>>>>> be a few weeks before I can check this.  I will keep you posted as
>>>>>>> soon
>>>>>>> as I
>>>>>>> can.
>>>>>>> I do have a question now:  After I cd agrsm08pci-2.1.80-20100106, am
>>>>>>> I
>>>>>>> correct in assuming you mean to use wvdial to attempt a connection?
>>>>>>>
>>>>>>>
>>>>>>> Marvin Stodolsky wrote:
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Martin,
>>>>>>>>
>>>>>>>> We have an update working on the 11c1:0620 chipset through kernels
>>>>>>>> 2.6.32
>>>>>>>> Please check on against your 11c1:0630 hardware.
>>>>>>>> Martin
>>>>>>>>
>>>>>>>> Within the /usr/src/ folder:
>>>>>>>> # tar zxf agrsm*.tar.gz
>>>>>>>> # cd agrsm06pci-2.1.80~20100106
>>>>>>>> Browse a while.
>>>>>>>>
>>>>>>>> Then run:
>>>>>>>> # ./postinst
>>>>>>>> and the DKMS system should do the rest of the install.
>>>>>>>>
>>>>>>>> Then proceed with modem tests.
>>>>>>>>
>>>>>>>> Report back to the list
>>>>>>>>
>>>>>>>> MarvS
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, Dec 5, 2009 at 4:14 PM, Marvin Stodolsky
>>>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Martin,
>>>>>>>>>
>>>>>>>>> As yet, we don't have an update supporting 11c1:0620 and 11c1:0630
>>>>>>>>> chipsets
>>>>>>>>>
>>>>>>>>> MarvS
>>>>>>>>>
>>>>>>>>> On Sat, Dec 5, 2009 at 5:50 PM, Martin Lupcke
>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have been away for several days and was wondering if there is
>>>>>>>>>> any
>>>>>>>>>> further
>>>>>>>>>> information available.  I did some searching, but nothing related
>>>>>>>>>> to
>>>>>>>>>> this
>>>>>>>>>> port error.  Considering I would not know what I am looking for
>>>>>>>>>> anyway....
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> re: > The deb file that Marv sent you is for Ubuntu systems and
>>>>>>>>>>> Not quite.  Martin was working from the general tarball.
>>>>>>>>>>>
>>>>>>>>>>> Rather the lethal error is here:
>>>>>>>>>>> serial26.c:983: error: ‘struct uart_info’ has no member named
>>>>>>>>>>> ‘port’
>>>>>>>>>>> ---
>>>>>>>>>>> I remember an error of this sort in some other code.
>>>>>>>>>>> Will check into it further later.
>>>>>>>>>>>
>>>>>>>>>>> MarvS
>>>>>>>>>>>
>>>>>>>>>>> On Sat, Nov 28, 2009 at 5:50 PM, Antonio Olivares
>>>>>>>>>>> <olivares14031@xxxxxxxxx> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Martin,
>>>>>>>>>>>>
>>>>>>>>>>>> I have achieved success with this 11c1:0620 chipset and Slax.  I
>>>>>>>>>>>> have
>>>>>>>>>>>> a ready built module, if you are willing to get Slax and run
>>>>>>>>>>>> from
>>>>>>>>>>>> livecd or usb (Slax 6.1.2) I can send you the lzm module.
>>>>>>>>>>>>
>>>>>>>>>>>> The deb file that Marv sent you is for Ubuntu systems and you
>>>>>>>>>>>> are
>>>>>>>>>>>> installing it on PCLinuxOS and thus the failure.  You might want
>>>>>>>>>>>> to
>>>>>>>>>>>> try and get the *.tar.gz equivalent file and try the build
>>>>>>>>>>>> again.
>>>>>>>>>>>>  If
>>>>>>>>>>>> you decide to do that, please post error messages that you might
>>>>>>>>>>>> get.
>>>>>>>>>>>>
>>>>>>>>>>>> If you decide to try Slax, let me know and I can email you the
>>>>>>>>>>>> lzm
>>>>>>>>>>>> module and/or slax build script.
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Antonio
>>>>>>>>>>>>
>>>>>>>>>>>> On 11/28/09, Martin Lupcke <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> First, Marvin, thank you for your patience with me and this
>>>>>>>>>>>>> situation.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I checked the agrsm06pci-2.1.80-20090825 folder and the
>>>>>>>>>>>>> postinst
>>>>>>>>>>>>> file
>>>>>>>>>>>>> you mention does not exist.  I moved that folder to the
>>>>>>>>>>>>> /usr/src
>>>>>>>>>>>>> and
>>>>>>>>>>>>> continued with your alternate commands.
>>>>>>>>>>>>>
>>>>>>>>>>>>> The first command (dkms add) worked successfully.
>>>>>>>>>>>>>
>>>>>>>>>>>>> The second command (dkms build) failed with the screen message
>>>>>>>>>>>>>  Error!  Bad return status for module build on kernel:
>>>>>>>>>>>>>  2.6.26.8.text3
>>>>>>>>>>>>> (i586)
>>>>>>>>>>>>>  Consult the make.log in the build directory
>>>>>>>>>>>>>  /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/  for more
>>>>>>>>>>>>> information
>>>>>>>>>>>>>
>>>>>>>>>>>>> The contents of that log file are as follows:
>>>>>>>>>>>>>
>>>>>>>>>>>>> ==Begin make.log
>>>>>>>>>>>>> DKMS make.log for agrsm06pci-2.1.80-20090825 for kernel
>>>>>>>>>>>>> 2.6.26.8.tex3
>>>>>>>>>>>>> (i586)
>>>>>>>>>>>>> Sat Nov 28 18:25:04 EST 2009
>>>>>>>>>>>>> make: Entering directory `/usr/src/linux-2.6.26.8.tex3'
>>>>>>>>>>>>>  LD
>>>>>>>>>>>>>  /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/built-in.o
>>>>>>>>>>>>>  CC [M]
>>>>>>>>>>>>>  /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.o
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘agr_pci_find_device’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:360:
>>>>>>>>>>>>> warning: ignoring return value of ‘pci_enable_device’, declared
>>>>>>>>>>>>> with
>>>>>>>>>>>>> attribute warn_unused_result
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_pcibios_read_config_byte’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:388:
>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_pcibios_read_config_word’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:391:
>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_pcibios_read_config_dword’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:394:
>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_pcibios_write_config_byte’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:397:
>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_pcibios_write_config_word’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:400:
>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_pcibios_write_config_dword’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:403:
>>>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_task_queue_init’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:442:
>>>>>>>>>>>>> warning: assignment from incompatible pointer type
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:
>>>>>>>>>>>>> In
>>>>>>>>>>>>> function ‘x_task_queue_init_usb’:
>>>>>>>>>>>>>
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:454:
>>>>>>>>>>>>> warning: assignment from incompatible pointer type
>>>>>>>>>>>>>  CC [M]  /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.o
>>>>>>>>>>>>> In file included from
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:13:
>>>>>>>>>>>>> include/sound/driver.h:1:2: warning: #warning "This file is
>>>>>>>>>>>>> deprecated"
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> function declaration isn’t a prototype
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:307:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> function declaration isn’t a prototype
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:314:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> function declaration isn’t a prototype
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘LnxTransferCodecVerbs’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:323:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> unused variable ‘CodecAddress’
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘LnxTransferCodecVerbsWrite’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:344:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> unused variable ‘CodecAddress’
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘findHDACodec’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:282:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> control reaches end of non-void function
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘GetHDABaseAddress’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> control reaches end of non-void function
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘getHDAStream’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:279:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> control reaches end of non-void function
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘LnxTransferCodecVerbs’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:340:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> ‘rvalue’ is used uninitialized in this function
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘LnxTransferCodecVerbsWrite’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:361:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> ‘rvalue’ is used uninitialized in this function
>>>>>>>>>>>>>  CC [M]
>>>>>>>>>>>>>  /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘receive_chars’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:983:
>>>>>>>>>>>>> error:
>>>>>>>>>>>>> ‘struct uart_info’ has no member named ‘port’
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘serial8250_startup’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1434:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> assignment from incompatible pointer type
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In
>>>>>>>>>>>>> function
>>>>>>>>>>>>> ‘serial8250_set_termios’:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> passing argument 2 of ‘uart_get_baud_rate’ from incompatible
>>>>>>>>>>>>> pointer
>>>>>>>>>>>>> type
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> passing argument 3 of ‘uart_get_baud_rate’ from incompatible
>>>>>>>>>>>>> pointer
>>>>>>>>>>>>> type
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: At
>>>>>>>>>>>>> top
>>>>>>>>>>>>> level:
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2115:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> initialization from incompatible pointer type
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2116:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> initialization from incompatible pointer type
>>>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2123:
>>>>>>>>>>>>> warning:
>>>>>>>>>>>>> initialization from incompatible pointer type
>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>> [/var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o]
>>>>>>>>>>>>> Error 1
>>>>>>>>>>>>> make: ***
>>>>>>>>>>>>> [_module_/var/lib/dkms/agrsm06pci/2.1.80-20090825/build]
>>>>>>>>>>>>> Error
>>>>>>>>>>>>> 2
>>>>>>>>>>>>> make: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
>>>>>>>>>>>>> ==End make.log
>>>>>>>>>>>>>
>>>>>>>>>>>>> Can you offer any further help?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Martin
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This is a postinst file in your
>>>>>>>>>>>>>> /usr/src/agrsm06pci-2.1.80-20090825
>>>>>>>>>>>>>> folder
>>>>>>>>>>>>>> if the agrsm06pci-2.1.80-20090825 folder is not in /usr/src/ ,
>>>>>>>>>>>>>> move
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> there.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Then with root permisssion, run
>>>>>>>>>>>>>> # ./postinst
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> or alternately the following  commands;
>>>>>>>>>>>>>> VER=2.1.80~20090825
>>>>>>>>>>>>>> dkms  add -m agrsm06pci -v $VER
>>>>>>>>>>>>>> dkms  build -m agrsm06pci -v $VER
>>>>>>>>>>>>>> dkms  install -m agrsm06pci -v $VER
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> If all successful
>>>>>>>>>>>>>> # agrsm-test
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> When you upgade to a new kernel, the dksm will automatically
>>>>>>>>>>>>>> compile
>>>>>>>>>>>>>> the matching kernels.
>>>>>>>>>>>>>> provided that the linux-headers for the new kernel are also
>>>>>>>>>>>>>> installed.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, Nov 27, 2009 at 10:36 AM, Martin Lupcke
>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Just to clarify, I am not sending these messages from the
>>>>>>>>>>>>>>> machine
>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>> which I
>>>>>>>>>>>>>>> am trying to install this driver.  If I need to install
>>>>>>>>>>>>>>> anything,
>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> be able to download from another machine and transfer via
>>>>>>>>>>>>>>> thumb
>>>>>>>>>>>>>>> drive,
>>>>>>>>>>>>>>> etc.
>>>>>>>>>>>>>>> Second, I just noticed that somehow the Ubuntu Linux got
>>>>>>>>>>>>>>> connected
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>> message and may be confusing.  I am not running Ubuntu, I am
>>>>>>>>>>>>>>> running
>>>>>>>>>>>>>>> PCLinuxOS2009.
>>>>>>>>>>>>>>> I already downloaded the deb file you mentioned.  When I try
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> driver with the dpkg command you provided earlier, I get a
>>>>>>>>>>>>>>> message
>>>>>>>>>>>>>>> about
>>>>>>>>>>>>>>> command not found.  This is not making sense to me since it
>>>>>>>>>>>>>>> appears
>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> dkms is already installed, based on the list of packages
>>>>>>>>>>>>>>> installed
>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> Package Manager.  All packages related to dkms are shown as
>>>>>>>>>>>>>>> installed.
>>>>>>>>>>>>>>> So, I am confused.  I cannot install the dkms without a modem
>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>> cannot
>>>>>>>>>>>>>>> install the modem driver without dkms.  To top it off, it
>>>>>>>>>>>>>>> appears
>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>> dkms
>>>>>>>>>>>>>>> is already installed.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Is there a source for dkms that I can download from another
>>>>>>>>>>>>>>> mashine?
>>>>>>>>>>>>>>>  I
>>>>>>>>>>>>>>> can
>>>>>>>>>>>>>>> try to reinstall dkms from that, if you think it would help.
>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825_i386.deb is at
>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>>>>>>>>>>>>>> but first install the dkms package, which will direct the
>>>>>>>>>>>>>>>> driver
>>>>>>>>>>>>>>>> compilation and installation.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke
>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I feel like I am missing something somewhere.
>>>>>>>>>>>>>>>>> I originally downloaded the file
>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825.tar.gz.
>>>>>>>>>>>>>>>>>  After
>>>>>>>>>>>>>>>>> unpacking, there are no *.deb files.
>>>>>>>>>>>>>>>>> So, I rechecked and found
>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825_i386.deb
>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>> just
>>>>>>>>>>>>>>>>> downloaded and tried to install with your directions.  Now
>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>> get
>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>> "command
>>>>>>>>>>>>>>>>> not found" message when attempting to do the dpkg command
>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>> provided.
>>>>>>>>>>>>>>>>> As near as I can tell, the dkms is installed on the
>>>>>>>>>>>>>>>>> machine.  I
>>>>>>>>>>>>>>>>> say
>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>> because all dkms-related items in the Package Manager
>>>>>>>>>>>>>>>>> (PCLinux2009)
>>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>>> listed as installed.
>>>>>>>>>>>>>>>>> I am beginning to think I am in a doom-loop.  I cannot
>>>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> driver
>>>>>>>>>>>>>>>>> with dpkg, and I cannot connect to the internet to update
>>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>>> packages
>>>>>>>>>>>>>>>>> because dial-up is my only means of connecting.
>>>>>>>>>>>>>>>>> Any guidance would be appreciated.
>>>>>>>>>>>>>>>>> Thanks for your efforts.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Martin,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Don't use the agrinst.  FIrst install the dkms package, if
>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>> haven't
>>>>>>>>>>>>>>>>>> already.
>>>>>>>>>>>>>>>>>> Then start the install with
>>>>>>>>>>>>>>>>>> $ sudo dpkg -i  agrsm*.deb
>>>>>>>>>>>>>>>>>> and the dkms system will take over.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> With the agrsm-tools.deb package previously installed,
>>>>>>>>>>>>>>>>>> then
>>>>>>>>>>>>>>>>>> run
>>>>>>>>>>>>>>>>>> $ sudo agrsm-test
>>>>>>>>>>>>>>>>>> for detection of your modem.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
>>>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I used the "find" command as you provided and found two
>>>>>>>>>>>>>>>>>>> entries
>>>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>>>> deleted.  I then went to install the
>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825
>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>> received
>>>>>>>>>>>>>>>>>>> the following results:
>>>>>>>>>>>>>>>>>>> ./agrinst
>>>>>>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag
>>>>>>>>>>>>>>>>>>> NE
>>>>>>>>>>>>>>>>>>> 5.0
>>>>>>>>>>>>>>>>>>> some files needed for installation are missing
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I stopped there and dropped this note for help.
>>>>>>>>>>>>>>>>>>> \Thanks.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Martin,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz  is the only package
>>>>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>>>>> may
>>>>>>>>>>>>>>>>>>>> provide service for the 11c1:0630 chipset
>>>>>>>>>>>>>>>>>>>> Best check that multiple driver sets are not installed
>>>>>>>>>>>>>>>>>>>> somewhere:
>>>>>>>>>>>>>>>>>>>> $ find  /lib/modules/$(uname -r)  -name agr*.ko
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> If there are multiple. Best delete all and rerun the
>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz  install.
>>>>>>>>>>>>>>>>>>>> If this was not the last installed delete all and rerun
>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz  install
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> It is not clear from your message below as to whether
>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>> wvdial
>>>>>>>>>>>>>>>>>>>> package is installed or not.
>>>>>>>>>>>>>>>>>>>> If not, from the bottom of
>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/
>>>>>>>>>>>>>>>>>>>> get the  wvdial_jaunty_i386.zip
>>>>>>>>>>>>>>>>>>>> Under Linux
>>>>>>>>>>>>>>>>>>>> $ unzip wv*.zip
>>>>>>>>>>>>>>>>>>>> $ cd  wvdial_jaunty_i386
>>>>>>>>>>>>>>>>>>>> $ ls
>>>>>>>>>>>>>>>>>>>> install with
>>>>>>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Then rerun the
>>>>>>>>>>>>>>>>>>>> $ sudo agrsm-test
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> If successful, it will write a file /etc/wvdial.conf   .
>>>>>>>>>>>>>>>>>>>>  Edit
>>>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>>>> with:
>>>>>>>>>>>>>>>>>>>> $ sudo gedit  /etc/wvdial.conf
>>>>>>>>>>>>>>>>>>>> putting in personal info while deleting symbols:  <  >
>>>>>>>>>>>>>>>>>>>>  ;
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Then try a dialout with:
>>>>>>>>>>>>>>>>>>>> $ sudo wvdial
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Upon a reboot the modem will be set up by:
>>>>>>>>>>>>>>>>>>>> $ sudo modprobe agrserial
>>>>>>>>>>>>>>>>>>>> You can check porsts with:
>>>>>>>>>>>>>>>>>>>> $ ls -l  /dev/AGR*  /dev/SAGR
>>>>>>>>>>>>>>>>>>>> and for driver loading:
>>>>>>>>>>>>>>>>>>>> $ lsmod  |  grep agr
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Once you are online under Linux  install the dkms driver
>>>>>>>>>>>>>>>>>>>> update
>>>>>>>>>>>>>>>>>>>> utility
>>>>>>>>>>>>>>>>>>>> with:
>>>>>>>>>>>>>>>>>>>> $ sudo apt-get update
>>>>>>>>>>>>>>>>>>>> $ sudo apt-get install dkms
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>>>>>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Several weeks ago, I sent a message back that I had
>>>>>>>>>>>>>>>>>>>>> tried a
>>>>>>>>>>>>>>>>>>>>> couple
>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>> driver
>>>>>>>>>>>>>>>>>>>>> packages to get my 11c1:0630 modem working.
>>>>>>>>>>>>>>>>>>>>>  Unfortunately,
>>>>>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>> lost
>>>>>>>>>>>>>>>>>>>>> track since then.  This is what I reported at that
>>>>>>>>>>>>>>>>>>>>> time.
>>>>>>>>>>>>>>>>>>>>> I attempted to install the "agrsm-2.1.80limited"
>>>>>>>>>>>>>>>>>>>>> driver.
>>>>>>>>>>>>>>>>>>>>>  The
>>>>>>>>>>>>>>>>>>>>> results
>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>> install are shown below:
>>>>>>>>>>>>>>>>>>>>>  ./agrinst
>>>>>>>>>>>>>>>>>>>>>  Installing Agere Softmodem driver version 2.1.80-Red
>>>>>>>>>>>>>>>>>>>>> Flag
>>>>>>>>>>>>>>>>>>>>> NE
>>>>>>>>>>>>>>>>>>>>> 5.0
>>>>>>>>>>>>>>>>>>>>>  some files needed for installation are missing
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> For kicks, I ran the agrsm-test.  The results of that
>>>>>>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>>>>>>> listed
>>>>>>>>>>>>>>>>>>>>> below:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>  Loading drivers:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>  Drivers loaded:
>>>>>>>>>>>>>>>>>>>>>  agrserial              11088  0
>>>>>>>>>>>>>>>>>>>>>  agrmodem             1184932  1 agrserial
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>  and symbolic link created:
>>>>>>>>>>>>>>>>>>>>>  lrwxrwxrwx 1 root root 12 Sep  5 18:40 /dev/ttySAGR ->
>>>>>>>>>>>>>>>>>>>>> /dev/ttyAGS3
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>  Checking for utility wvdialconf
>>>>>>>>>>>>>>>>>>>>>  Found /usr/bin/wvdialconf, preparing to run:
>>>>>>>>>>>>>>>>>>>>>  wvdialconf /etc/wvdial.conf
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>  A reboot may be necessary before modem detection
>>>>>>>>>>>>>>>>>>>>> through:
>>>>>>>>>>>>>>>>>>>>>  sudo modprobe agrserial
>>>>>>>>>>>>>>>>>>>>>  Which will load agrmodem, agrserial and create the
>>>>>>>>>>>>>>>>>>>>> symbolic
>>>>>>>>>>>>>>>>>>>>> link
>>>>>>>>>>>>>>>>>>>>> needed
>>>>>>>>>>>>>>>>>>>>> for:
>>>>>>>>>>>>>>>>>>>>>  sudo wvdialconf
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I also tried to install the
>>>>>>>>>>>>>>>>>>>>> "agrsm06pci-2.1.80~20090825"
>>>>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>> same
>>>>>>>>>>>>>>>>>>>>> result as above.
>>>>>>>>>>>>>>>>>>>>> Can you walk me thru what needs to be done now?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks for all the help.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Jacques Goldberg wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> DONE but Martin the complete URL is
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show
>>>>>>>>>>>>>>>>>>>>>> how
>>>>>>>>>>>>>>>>>>>>>> one
>>>>>>>>>>>>>>>>>>>>>> unpacks
>>>>>>>>>>>>>>>>>>>>>> such
>>>>>>>>>>>>>>>>>>>>>> a kind of file).
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Jacques
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Martin
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Attached is the tarball packaging.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> # tar zxvf agrsm.tar.gz
>>>>>>>>>>>>>>>>>>>>>>> and see the 1stReadme.txt therein.
>>>>>>>>>>>>>>>>>>>>>>> If you are not using the Deb installer previously
>>>>>>>>>>>>>>>>>>>>>>> sent,
>>>>>>>>>>>>>>>>>>>>>>> the best place to unpack it is in /usr/src/ to
>>>>>>>>>>>>>>>>>>>>>>> potentially
>>>>>>>>>>>>>>>>>>>>>>> enable
>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>> dkms support.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Jacques,
>>>>>>>>>>>>>>>>>>>>>>>  put in the 11c11040 folder please.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>>>>>>>>>>>>>>>>>>>> Stodolsky<marvin.stodolsky@xxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>  http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>>>>>>>>>>>>>>>>>>>> is the correct address, but the server seems to be
>>>>>>>>>>>>>>>>>>>>>>>> offline
>>>>>>>>>>>>>>>>>>>>>>>> now.
>>>>>>>>>>>>>>>>>>>>>>>> This happens occassional
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>>>>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>>> correct address.  I'll also send you the Debian
>>>>>>>>>>>>>>>>>>>>>>>> installer
>>>>>>>>>>>>>>>>>>>>>>>> variant
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>>>>>>>>>>>>>>>>>>>> Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I have been trying to follow the recent messages on
>>>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>>>> 11c1:0620
>>>>>>>>>>>>>>>>>>>>>>>>> &
>>>>>>>>>>>>>>>>>>>>>>>>> 0630
>>>>>>>>>>>>>>>>>>>>>>>>> modems.  On the 24th, Jacques put a file at
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>>>>>>>>>>>>>>>>>>>>  but I cannot find it.  (The path 11c11040 does not
>>>>>>>>>>>>>>>>>>>>>>>>> appear
>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>> exist.)
>>>>>>>>>>>>>>>>>>>>>>>>>  Later, it seems like there were additional steps
>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>>>>>>>>>>>> this,
>>>>>>>>>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>>>>>>>>>> I got
>>>>>>>>>>>>>>>>>>>>>>>>> totally lost trying to determine what should or
>>>>>>>>>>>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>> done.
>>>>>>>>>>>>>>>>>>>>>>>>>  Most
>>>>>>>>>>>>>>>>>>>>>>>>> recently (below), it seems that John got an 0620
>>>>>>>>>>>>>>>>>>>>>>>>> working
>>>>>>>>>>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu.
>>>>>>>>>>>>>>>>>>>>>>>>> I am far from a Linux expert (obviously), but could
>>>>>>>>>>>>>>>>>>>>>>>>> someone
>>>>>>>>>>>>>>>>>>>>>>>>> help
>>>>>>>>>>>>>>>>>>>>>>>>> clear
>>>>>>>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>>>>>>>> up for me so I can try to get my 0630 working in
>>>>>>>>>>>>>>>>>>>>>>>>> PCLinux?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> john31608@xxxxxxxxxx wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Marvin:
>>>>>>>>>>>>>>>>>>>>>>>>>>  I want you to know I have the agere SV92PP
>>>>>>>>>>>>>>>>>>>>>>>>>> 11c10620
>>>>>>>>>>>>>>>>>>>>>>>>>> modem
>>>>>>>>>>>>>>>>>>>>>>>>>> card
>>>>>>>>>>>>>>>>>>>>>>>>>> now
>>>>>>>>>>>>>>>>>>>>>>>>>> running reliably.  I went with a fresh reinstall
>>>>>>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu9.04
>>>>>>>>>>>>>>>>>>>>>>>>>> Jaunty
>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>> installation of the following:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>>>>>>>>>>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>>>>>>>>>>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>>>>>>>>>>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima  This is a
>>>>>>>>>>>>>>>>>>>>>>>>>> package
>>>>>>>>>>>>>>>>>>>>>>>>>> consisting
>>>>>>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>>>>>>> wvdial
>>>>>>>>>>>>>>>>>>>>>>>>>> with dependencies
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>  It was all double click and go with installation
>>>>>>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>>>>>>> agrmodem.ko
>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>> agrserial.ko to
>>>>>>>>>>>>>>>>>>>>>>>>>> /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>  It looks like at this point from the terminal
>>>>>>>>>>>>>>>>>>>>>>>>>> sudo
>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test
>>>>>>>>>>>>>>>>>>>>>>>>>>  would
>>>>>>>>>>>>>>>>>>>>>>>>>> have taken me to completion save for entering my
>>>>>>>>>>>>>>>>>>>>>>>>>> name,
>>>>>>>>>>>>>>>>>>>>>>>>>> password
>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>> phone
>>>>>>>>>>>>>>>>>>>>>>>>>> number in ./etc/wvdial.conf.  Everything is
>>>>>>>>>>>>>>>>>>>>>>>>>> spelled
>>>>>>>>>>>>>>>>>>>>>>>>>> out
>>>>>>>>>>>>>>>>>>>>>>>>>> as
>>>>>>>>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>>>>>>>>> go
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>  I had tried after running
>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>  sudo modprobe agrmodem
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>  sudo modprobe agrserial
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>  etc, etc using the page "LSI/AgereSystems
>>>>>>>>>>>>>>>>>>>>>>>>>> 11c11040
>>>>>>>>>>>>>>>>>>>>>>>>>> chipset
>>>>>>>>>>>>>>>>>>>>>>>>>> support
>>>>>>>>>>>>>>>>>>>>>>>>>> installation ,using dkms tools" from the Linmodems
>>>>>>>>>>>>>>>>>>>>>>>>>> discussion
>>>>>>>>>>>>>>>>>>>>>>>>>> board
>>>>>>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find
>>>>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>>>>> file
>>>>>>>>>>>>>>>>>>>>>>>>>> wvtest.
>>>>>>>>>>>>>>>>>>>>>>>>>>  sudo
>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test rescued me.  The modem was found on
>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/ttySAGR.
>>>>>>>>>>>>>>>>>>>>>>>>>>  While
>>>>>>>>>>>>>>>>>>>>>>>>>> trying
>>>>>>>>>>>>>>>>>>>>>>>>>> to configure the network tools point to point
>>>>>>>>>>>>>>>>>>>>>>>>>> connection
>>>>>>>>>>>>>>>>>>>>>>>>>> interface
>>>>>>>>>>>>>>>>>>>>>>>>>>  I
>>>>>>>>>>>>>>>>>>>>>>>>>> lost
>>>>>>>>>>>>>>>>>>>>>>>>>> the connection and it appears the file
>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/ttySAGR
>>>>>>>>>>>>>>>>>>>>>>>>>> was
>>>>>>>>>>>>>>>>>>>>>>>>>> lost
>>>>>>>>>>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>>>>>>>>>>> sudo
>>>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test brought it right back.  I then had to
>>>>>>>>>>>>>>>>>>>>>>>>>> reenter
>>>>>>>>>>>>>>>>>>>>>>>>>> my
>>>>>>>>>>>>>>>>>>>>>>>>>> name,
>>>>>>>>>>>>>>>>>>>>>>>>>> phone
>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>> PW but it all went pretty smoothly.  My hat is off
>>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>>>>> others
>>>>>>>>>>>>>>>>>>>>>>>>>> who
>>>>>>>>>>>>>>>>>>>>>>>>>> have been so patient with all this.  Thank You
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Yours truly, John W
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>
>>
>>
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux