Martin, Per below the compile is successful on my System, for Ubuntu 2.6.28-16-generic resources Please try the preceding package agrsm06pci-2.1.80~20090825.tar.gz , in case there is a backward compatibilty issue for your 2.6.26.8.tex3 resources. MarvS ============== agrsm06pci-2.1.80~20100106# make make -C /lib/modules/2.6.28-16-generic/build M=/usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.28-16-generic' CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.o /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function ‘x_linux_dbg_print_crit’: /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:349: warning: the frame size of 1536 bytes is larger than 1024 bytes /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function ‘x_linux_dbg_print’: /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:337: warning: the frame size of 1536 bytes is larger than 1024 bytes SHIPPED /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/hda.o CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/serial26.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.o Building modules, stage 2. MODPOST 2 modules WARNING: could not find /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/.agrmodemlib.o.cmd for /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o CC /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.mod.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.ko CC /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.mod.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-16-generic' # ls -l *.ko -rw-r--r-- 1 root staff 1683004 2010-02-12 19:44 agrmodem.ko -rw-r--r-- 1 root staff 26169 2010-02-12 19:44 agrserial.ko ========= On Fri, Feb 12, 2010 at 8:03 PM, Martin Lupcke <mossianin_lbcmi@xxxxxxxxxx> wrote: > I apologize for the delay, but here is what I did and the results. > > --I copied the tar to /usr/src and ran the tar command as noted below. > --I cd to the new directory > --I ran the make command and got the following message > make -C /lib/modules/2.6.26.8.tex3/build > M=/usr/src/agrsm06pci-2.1.80~20100106 modules > make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3' > CC [M] /usr/src/agrsm06pci-2.1.80~20100106/serial26.o > /usr/src/agrsm06pci-2.1.80~20100106/serial26.c: In function ‘receive_chars’: > /usr/src/agrsm06pci-2.1.80~20100106/serial26.c:1005: error: ‘struct > uart_info’ has no member named ‘port’ > make[2]: *** [/usr/src/agrsm06pci-2.1.80~20100106/serial26.o] Error 1 > make[1]: *** [_module_/usr/src/agrsm06pci-2.1.80~20100106] Error 2 > make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3' > make: *** [default] Error 2 > > I believe that message about "struct_uart_info" is the same that I got with > an earlier attempt at this. > The make install failed. I also tried the wvdialconf /etc/wvdial.conf and > that failed with a message about not being able to detect the modem. > I am not sure where this leaves the situation. > Any feedback would be appreciated. > > Thanks. > > > Marvin Stodolsky wrote: >> >> Martin, >> >> After compiling the drivers and installing. >> Run the >> agrsm-test >> >> if successfull, through the included wvdialconf test >> gedit /etc/wvdial.conf >> and try a dialout with: >> $ sudo wvdial >> >> MarvS >> >> On Sun, Jan 10, 2010 at 3:21 PM, Martin Lupcke >> <mossianin_lbcmi@xxxxxxxxxx> wrote: >> >>> >>> Thanks for the update. Because of my limited access to the machine, it >>> will >>> be a few weeks before I can check this. I will keep you posted as soon >>> as I >>> can. >>> I do have a question now: After I cd agrsm08pci-2.1.80-20100106, am I >>> correct in assuming you mean to use wvdial to attempt a connection? >>> >>> >>> Marvin Stodolsky wrote: >>> >>>> >>>> Martin, >>>> >>>> We have an update working on the 11c1:0620 chipset through kernels >>>> 2.6.32 >>>> Please check on against your 11c1:0630 hardware. >>>> Martin >>>> >>>> Within the /usr/src/ folder: >>>> # tar zxf agrsm*.tar.gz >>>> # cd agrsm06pci-2.1.80~20100106 >>>> Browse a while. >>>> >>>> Then run: >>>> # ./postinst >>>> and the DKMS system should do the rest of the install. >>>> >>>> Then proceed with modem tests. >>>> >>>> Report back to the list >>>> >>>> MarvS >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Sat, Dec 5, 2009 at 4:14 PM, Marvin Stodolsky >>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>> >>>> >>>>> >>>>> Martin, >>>>> >>>>> As yet, we don't have an update supporting 11c1:0620 and 11c1:0630 >>>>> chipsets >>>>> >>>>> MarvS >>>>> >>>>> On Sat, Dec 5, 2009 at 5:50 PM, Martin Lupcke >>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>> >>>>> >>>>>> >>>>>> I have been away for several days and was wondering if there is any >>>>>> further >>>>>> information available. I did some searching, but nothing related to >>>>>> this >>>>>> port error. Considering I would not know what I am looking for >>>>>> anyway.... >>>>>> >>>>>> Thanks. >>>>>> >>>>>> >>>>>> Marvin Stodolsky wrote: >>>>>> >>>>>> >>>>>>> >>>>>>> re: > The deb file that Marv sent you is for Ubuntu systems and >>>>>>> Not quite. Martin was working from the general tarball. >>>>>>> >>>>>>> Rather the lethal error is here: >>>>>>> serial26.c:983: error: ‘struct uart_info’ has no member named ‘port’ >>>>>>> --- >>>>>>> I remember an error of this sort in some other code. >>>>>>> Will check into it further later. >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> On Sat, Nov 28, 2009 at 5:50 PM, Antonio Olivares >>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Martin, >>>>>>>> >>>>>>>> I have achieved success with this 11c1:0620 chipset and Slax. I >>>>>>>> have >>>>>>>> a ready built module, if you are willing to get Slax and run from >>>>>>>> livecd or usb (Slax 6.1.2) I can send you the lzm module. >>>>>>>> >>>>>>>> The deb file that Marv sent you is for Ubuntu systems and you are >>>>>>>> installing it on PCLinuxOS and thus the failure. You might want to >>>>>>>> try and get the *.tar.gz equivalent file and try the build again. >>>>>>>> If >>>>>>>> you decide to do that, please post error messages that you might >>>>>>>> get. >>>>>>>> >>>>>>>> If you decide to try Slax, let me know and I can email you the lzm >>>>>>>> module and/or slax build script. >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> On 11/28/09, Martin Lupcke <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> First, Marvin, thank you for your patience with me and this >>>>>>>>> situation. >>>>>>>>> >>>>>>>>> I checked the agrsm06pci-2.1.80-20090825 folder and the postinst >>>>>>>>> file >>>>>>>>> you mention does not exist. I moved that folder to the /usr/src >>>>>>>>> and >>>>>>>>> continued with your alternate commands. >>>>>>>>> >>>>>>>>> The first command (dkms add) worked successfully. >>>>>>>>> >>>>>>>>> The second command (dkms build) failed with the screen message >>>>>>>>> Error! Bad return status for module build on kernel: >>>>>>>>> 2.6.26.8.text3 >>>>>>>>> (i586) >>>>>>>>> Consult the make.log in the build directory >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/ for more >>>>>>>>> information >>>>>>>>> >>>>>>>>> The contents of that log file are as follows: >>>>>>>>> >>>>>>>>> ==Begin make.log >>>>>>>>> DKMS make.log for agrsm06pci-2.1.80-20090825 for kernel >>>>>>>>> 2.6.26.8.tex3 >>>>>>>>> (i586) >>>>>>>>> Sat Nov 28 18:25:04 EST 2009 >>>>>>>>> make: Entering directory `/usr/src/linux-2.6.26.8.tex3' >>>>>>>>> LD /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/built-in.o >>>>>>>>> CC [M] >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.o >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘agr_pci_find_device’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:360: >>>>>>>>> warning: ignoring return value of ‘pci_enable_device’, declared >>>>>>>>> with >>>>>>>>> attribute warn_unused_result >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_pcibios_read_config_byte’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:388: >>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>> include/linux/pci.h:516) >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_pcibios_read_config_word’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:391: >>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>> include/linux/pci.h:516) >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_pcibios_read_config_dword’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:394: >>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>> include/linux/pci.h:516) >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_pcibios_write_config_byte’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:397: >>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>> include/linux/pci.h:516) >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_pcibios_write_config_word’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:400: >>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>> include/linux/pci.h:516) >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_pcibios_write_config_dword’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:403: >>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at >>>>>>>>> include/linux/pci.h:516) >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_task_queue_init’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:442: >>>>>>>>> warning: assignment from incompatible pointer type >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In >>>>>>>>> function ‘x_task_queue_init_usb’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:454: >>>>>>>>> warning: assignment from incompatible pointer type >>>>>>>>> CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.o >>>>>>>>> In file included from >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:13: >>>>>>>>> include/sound/driver.h:1:2: warning: #warning "This file is >>>>>>>>> deprecated" >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280: warning: >>>>>>>>> function declaration isn’t a prototype >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:307: warning: >>>>>>>>> function declaration isn’t a prototype >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:314: warning: >>>>>>>>> function declaration isn’t a prototype >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘LnxTransferCodecVerbs’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:323: warning: >>>>>>>>> unused variable ‘CodecAddress’ >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘LnxTransferCodecVerbsWrite’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:344: warning: >>>>>>>>> unused variable ‘CodecAddress’ >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘findHDACodec’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:282: warning: >>>>>>>>> control reaches end of non-void function >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘GetHDABaseAddress’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280: warning: >>>>>>>>> control reaches end of non-void function >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘getHDAStream’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:279: warning: >>>>>>>>> control reaches end of non-void function >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘LnxTransferCodecVerbs’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:340: warning: >>>>>>>>> ‘rvalue’ is used uninitialized in this function >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function >>>>>>>>> ‘LnxTransferCodecVerbsWrite’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:361: warning: >>>>>>>>> ‘rvalue’ is used uninitialized in this function >>>>>>>>> CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In >>>>>>>>> function >>>>>>>>> ‘receive_chars’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:983: >>>>>>>>> error: >>>>>>>>> ‘struct uart_info’ has no member named ‘port’ >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In >>>>>>>>> function >>>>>>>>> ‘serial8250_startup’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1434: >>>>>>>>> warning: >>>>>>>>> assignment from incompatible pointer type >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In >>>>>>>>> function >>>>>>>>> ‘serial8250_set_termios’: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699: >>>>>>>>> warning: >>>>>>>>> passing argument 2 of ‘uart_get_baud_rate’ from incompatible >>>>>>>>> pointer >>>>>>>>> type >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699: >>>>>>>>> warning: >>>>>>>>> passing argument 3 of ‘uart_get_baud_rate’ from incompatible >>>>>>>>> pointer >>>>>>>>> type >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: At top >>>>>>>>> level: >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2115: >>>>>>>>> warning: >>>>>>>>> initialization from incompatible pointer type >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2116: >>>>>>>>> warning: >>>>>>>>> initialization from incompatible pointer type >>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2123: >>>>>>>>> warning: >>>>>>>>> initialization from incompatible pointer type >>>>>>>>> make[1]: *** >>>>>>>>> [/var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o] >>>>>>>>> Error 1 >>>>>>>>> make: *** [_module_/var/lib/dkms/agrsm06pci/2.1.80-20090825/build] >>>>>>>>> Error >>>>>>>>> 2 >>>>>>>>> make: Leaving directory `/usr/src/linux-2.6.26.8.tex3' >>>>>>>>> ==End make.log >>>>>>>>> >>>>>>>>> Can you offer any further help? >>>>>>>>> >>>>>>>>> >>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Martin >>>>>>>>>> >>>>>>>>>> This is a postinst file in your >>>>>>>>>> /usr/src/agrsm06pci-2.1.80-20090825 >>>>>>>>>> folder >>>>>>>>>> if the agrsm06pci-2.1.80-20090825 folder is not in /usr/src/ , >>>>>>>>>> move >>>>>>>>>> it >>>>>>>>>> there. >>>>>>>>>> >>>>>>>>>> Then with root permisssion, run >>>>>>>>>> # ./postinst >>>>>>>>>> >>>>>>>>>> or alternately the following commands; >>>>>>>>>> VER=2.1.80~20090825 >>>>>>>>>> dkms add -m agrsm06pci -v $VER >>>>>>>>>> dkms build -m agrsm06pci -v $VER >>>>>>>>>> dkms install -m agrsm06pci -v $VER >>>>>>>>>> >>>>>>>>>> If all successful >>>>>>>>>> # agrsm-test >>>>>>>>>> >>>>>>>>>> When you upgade to a new kernel, the dksm will automatically >>>>>>>>>> compile >>>>>>>>>> the matching kernels. >>>>>>>>>> provided that the linux-headers for the new kernel are also >>>>>>>>>> installed. >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> On Fri, Nov 27, 2009 at 10:36 AM, Martin Lupcke >>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Just to clarify, I am not sending these messages from the machine >>>>>>>>>>> on >>>>>>>>>>> which I >>>>>>>>>>> am trying to install this driver. If I need to install anything, >>>>>>>>>>> I >>>>>>>>>>> have >>>>>>>>>>> to >>>>>>>>>>> be able to download from another machine and transfer via thumb >>>>>>>>>>> drive, >>>>>>>>>>> etc. >>>>>>>>>>> Second, I just noticed that somehow the Ubuntu Linux got >>>>>>>>>>> connected >>>>>>>>>>> to >>>>>>>>>>> this >>>>>>>>>>> message and may be confusing. I am not running Ubuntu, I am >>>>>>>>>>> running >>>>>>>>>>> PCLinuxOS2009. >>>>>>>>>>> I already downloaded the deb file you mentioned. When I try to >>>>>>>>>>> install >>>>>>>>>>> the >>>>>>>>>>> driver with the dpkg command you provided earlier, I get a >>>>>>>>>>> message >>>>>>>>>>> about >>>>>>>>>>> command not found. This is not making sense to me since it >>>>>>>>>>> appears >>>>>>>>>>> that >>>>>>>>>>> the >>>>>>>>>>> dkms is already installed, based on the list of packages >>>>>>>>>>> installed >>>>>>>>>>> in >>>>>>>>>>> the >>>>>>>>>>> Package Manager. All packages related to dkms are shown as >>>>>>>>>>> installed. >>>>>>>>>>> So, I am confused. I cannot install the dkms without a modem and >>>>>>>>>>> I >>>>>>>>>>> cannot >>>>>>>>>>> install the modem driver without dkms. To top it off, it appears >>>>>>>>>>> that >>>>>>>>>>> dkms >>>>>>>>>>> is already installed. >>>>>>>>>>> >>>>>>>>>>> Is there a source for dkms that I can download from another >>>>>>>>>>> mashine? >>>>>>>>>>> I >>>>>>>>>>> can >>>>>>>>>>> try to reinstall dkms from that, if you think it would help. >>>>>>>>>>> Thanks. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> agrsm06pci-2.1.80-20090825_i386.deb is at >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>>>>>>>>>> but first install the dkms package, which will direct the driver >>>>>>>>>>>> compilation and installation. >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke >>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> I feel like I am missing something somewhere. >>>>>>>>>>>>> I originally downloaded the file >>>>>>>>>>>>> agrsm06pci-2.1.80-20090825.tar.gz. >>>>>>>>>>>>> After >>>>>>>>>>>>> unpacking, there are no *.deb files. >>>>>>>>>>>>> So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb >>>>>>>>>>>>> which >>>>>>>>>>>>> I >>>>>>>>>>>>> just >>>>>>>>>>>>> downloaded and tried to install with your directions. Now I >>>>>>>>>>>>> get >>>>>>>>>>>>> a >>>>>>>>>>>>> "command >>>>>>>>>>>>> not found" message when attempting to do the dpkg command you >>>>>>>>>>>>> provided. >>>>>>>>>>>>> As near as I can tell, the dkms is installed on the machine. I >>>>>>>>>>>>> say >>>>>>>>>>>>> that >>>>>>>>>>>>> because all dkms-related items in the Package Manager >>>>>>>>>>>>> (PCLinux2009) >>>>>>>>>>>>> are >>>>>>>>>>>>> listed as installed. >>>>>>>>>>>>> I am beginning to think I am in a doom-loop. I cannot install >>>>>>>>>>>>> the >>>>>>>>>>>>> driver >>>>>>>>>>>>> with dpkg, and I cannot connect to the internet to update any >>>>>>>>>>>>> packages >>>>>>>>>>>>> because dial-up is my only means of connecting. >>>>>>>>>>>>> Any guidance would be appreciated. >>>>>>>>>>>>> Thanks for your efforts. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Martin, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Don't use the agrinst. FIrst install the dkms package, if you >>>>>>>>>>>>>> haven't >>>>>>>>>>>>>> already. >>>>>>>>>>>>>> Then start the install with >>>>>>>>>>>>>> $ sudo dpkg -i agrsm*.deb >>>>>>>>>>>>>> and the dkms system will take over. >>>>>>>>>>>>>> >>>>>>>>>>>>>> With the agrsm-tools.deb package previously installed, then >>>>>>>>>>>>>> run >>>>>>>>>>>>>> $ sudo agrsm-test >>>>>>>>>>>>>> for detection of your modem. >>>>>>>>>>>>>> >>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke >>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I used the "find" command as you provided and found two >>>>>>>>>>>>>>> entries >>>>>>>>>>>>>>> which >>>>>>>>>>>>>>> I >>>>>>>>>>>>>>> deleted. I then went to install the >>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825 >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> received >>>>>>>>>>>>>>> the following results: >>>>>>>>>>>>>>> ./agrinst >>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE >>>>>>>>>>>>>>> 5.0 >>>>>>>>>>>>>>> some files needed for installation are missing >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I stopped there and dropped this note for help. >>>>>>>>>>>>>>> \Thanks. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Martin, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which >>>>>>>>>>>>>>>> may >>>>>>>>>>>>>>>> provide service for the 11c1:0630 chipset >>>>>>>>>>>>>>>> Best check that multiple driver sets are not installed >>>>>>>>>>>>>>>> somewhere: >>>>>>>>>>>>>>>> $ find /lib/modules/$(uname -r) -name agr*.ko >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If there are multiple. Best delete all and rerun the >>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install. >>>>>>>>>>>>>>>> If this was not the last installed delete all and rerun the >>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> It is not clear from your message below as to whether the >>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>> package is installed or not. >>>>>>>>>>>>>>>> If not, from the bottom of >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ >>>>>>>>>>>>>>>> get the wvdial_jaunty_i386.zip >>>>>>>>>>>>>>>> Under Linux >>>>>>>>>>>>>>>> $ unzip wv*.zip >>>>>>>>>>>>>>>> $ cd wvdial_jaunty_i386 >>>>>>>>>>>>>>>> $ ls >>>>>>>>>>>>>>>> install with >>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Then rerun the >>>>>>>>>>>>>>>> $ sudo agrsm-test >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If successful, it will write a file /etc/wvdial.conf . >>>>>>>>>>>>>>>> Edit >>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>> with: >>>>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>>>> putting in personal info while deleting symbols: < > ; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Then try a dialout with: >>>>>>>>>>>>>>>> $ sudo wvdial >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Upon a reboot the modem will be set up by: >>>>>>>>>>>>>>>> $ sudo modprobe agrserial >>>>>>>>>>>>>>>> You can check porsts with: >>>>>>>>>>>>>>>> $ ls -l /dev/AGR* /dev/SAGR >>>>>>>>>>>>>>>> and for driver loading: >>>>>>>>>>>>>>>> $ lsmod | grep agr >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Once you are online under Linux install the dkms driver >>>>>>>>>>>>>>>> update >>>>>>>>>>>>>>>> utility >>>>>>>>>>>>>>>> with: >>>>>>>>>>>>>>>> $ sudo apt-get update >>>>>>>>>>>>>>>> $ sudo apt-get install dkms >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke >>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Several weeks ago, I sent a message back that I had tried a >>>>>>>>>>>>>>>>> couple >>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>>> packages to get my 11c1:0630 modem working. Unfortunately, >>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>> lost >>>>>>>>>>>>>>>>> track since then. This is what I reported at that time. >>>>>>>>>>>>>>>>> I attempted to install the "agrsm-2.1.80limited" driver. >>>>>>>>>>>>>>>>> The >>>>>>>>>>>>>>>>> results >>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>> install are shown below: >>>>>>>>>>>>>>>>> ./agrinst >>>>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag >>>>>>>>>>>>>>>>> NE >>>>>>>>>>>>>>>>> 5.0 >>>>>>>>>>>>>>>>> some files needed for installation are missing >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> For kicks, I ran the agrsm-test. The results of that are >>>>>>>>>>>>>>>>> listed >>>>>>>>>>>>>>>>> below: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Loading drivers: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Drivers loaded: >>>>>>>>>>>>>>>>> agrserial 11088 0 >>>>>>>>>>>>>>>>> agrmodem 1184932 1 agrserial >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> and symbolic link created: >>>>>>>>>>>>>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> >>>>>>>>>>>>>>>>> /dev/ttyAGS3 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Checking for utility wvdialconf >>>>>>>>>>>>>>>>> Found /usr/bin/wvdialconf, preparing to run: >>>>>>>>>>>>>>>>> wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> A reboot may be necessary before modem detection through: >>>>>>>>>>>>>>>>> sudo modprobe agrserial >>>>>>>>>>>>>>>>> Which will load agrmodem, agrserial and create the >>>>>>>>>>>>>>>>> symbolic >>>>>>>>>>>>>>>>> link >>>>>>>>>>>>>>>>> needed >>>>>>>>>>>>>>>>> for: >>>>>>>>>>>>>>>>> sudo wvdialconf >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I also tried to install the "agrsm06pci-2.1.80~20090825" >>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>> same >>>>>>>>>>>>>>>>> result as above. >>>>>>>>>>>>>>>>> Can you walk me thru what needs to be done now? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks for all the help. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Jacques Goldberg wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> DONE but Martin the complete URL is >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show how >>>>>>>>>>>>>>>>>> one >>>>>>>>>>>>>>>>>> unpacks >>>>>>>>>>>>>>>>>> such >>>>>>>>>>>>>>>>>> a kind of file). >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Martin >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Attached is the tarball packaging. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> # tar zxvf agrsm.tar.gz >>>>>>>>>>>>>>>>>>> and see the 1stReadme.txt therein. >>>>>>>>>>>>>>>>>>> If you are not using the Deb installer previously sent, >>>>>>>>>>>>>>>>>>> the best place to unpack it is in /usr/src/ to >>>>>>>>>>>>>>>>>>> potentially >>>>>>>>>>>>>>>>>>> enable >>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>> dkms support. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Jacques, >>>>>>>>>>>>>>>>>>> put in the 11c11040 folder please. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin >>>>>>>>>>>>>>>>>>> Stodolsky<marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/ >>>>>>>>>>>>>>>>>>>> is the correct address, but the server seems to be >>>>>>>>>>>>>>>>>>>> offline >>>>>>>>>>>>>>>>>>>> now. >>>>>>>>>>>>>>>>>>>> This happens occassional >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> John >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>>>>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>> correct address. I'll also send you the Debian >>>>>>>>>>>>>>>>>>>> installer >>>>>>>>>>>>>>>>>>>> variant >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin >>>>>>>>>>>>>>>>>>>> Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I have been trying to follow the recent messages on the >>>>>>>>>>>>>>>>>>>>> 11c1:0620 >>>>>>>>>>>>>>>>>>>>> & >>>>>>>>>>>>>>>>>>>>> 0630 >>>>>>>>>>>>>>>>>>>>> modems. On the 24th, Jacques put a file at >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz >>>>>>>>>>>>>>>>>>>>> but I cannot find it. (The path 11c11040 does not >>>>>>>>>>>>>>>>>>>>> appear >>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>> exist.) >>>>>>>>>>>>>>>>>>>>> Later, it seems like there were additional steps to >>>>>>>>>>>>>>>>>>>>> install >>>>>>>>>>>>>>>>>>>>> this, >>>>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>>>> I got >>>>>>>>>>>>>>>>>>>>> totally lost trying to determine what should or should >>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>> done. >>>>>>>>>>>>>>>>>>>>> Most >>>>>>>>>>>>>>>>>>>>> recently (below), it seems that John got an 0620 >>>>>>>>>>>>>>>>>>>>> working >>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>> Ubuntu. >>>>>>>>>>>>>>>>>>>>> I am far from a Linux expert (obviously), but could >>>>>>>>>>>>>>>>>>>>> someone >>>>>>>>>>>>>>>>>>>>> help >>>>>>>>>>>>>>>>>>>>> clear >>>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>>> up for me so I can try to get my 0630 working in >>>>>>>>>>>>>>>>>>>>> PCLinux? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> john31608@xxxxxxxxxx wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Marvin: >>>>>>>>>>>>>>>>>>>>>> I want you to know I have the agere SV92PP 11c10620 >>>>>>>>>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>>>>>>>>> card >>>>>>>>>>>>>>>>>>>>>> now >>>>>>>>>>>>>>>>>>>>>> running reliably. I went with a fresh reinstall of >>>>>>>>>>>>>>>>>>>>>> Ubuntu9.04 >>>>>>>>>>>>>>>>>>>>>> Jaunty >>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>> installation of the following: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> agrsm-tools_0.0.1_all.deb >>>>>>>>>>>>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb >>>>>>>>>>>>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb >>>>>>>>>>>>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package >>>>>>>>>>>>>>>>>>>>>> consisting >>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>>>>> with dependencies >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> It was all double click and go with installation of >>>>>>>>>>>>>>>>>>>>>> agrmodem.ko >>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>> agrserial.ko to >>>>>>>>>>>>>>>>>>>>>> /lib/modules/2.6.28-11-generic/updates/dkms >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> It looks like at this point from the terminal sudo >>>>>>>>>>>>>>>>>>>>>> agrsm-test >>>>>>>>>>>>>>>>>>>>>> would >>>>>>>>>>>>>>>>>>>>>> have taken me to completion save for entering my name, >>>>>>>>>>>>>>>>>>>>>> password >>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>> phone >>>>>>>>>>>>>>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled >>>>>>>>>>>>>>>>>>>>>> out >>>>>>>>>>>>>>>>>>>>>> as >>>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>> go >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I had tried after running >>>>>>>>>>>>>>>>>>>>>> agrsm06pci_2.1.80~20090825_i386.deb >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrmodem >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrserial >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 >>>>>>>>>>>>>>>>>>>>>> chipset >>>>>>>>>>>>>>>>>>>>>> support >>>>>>>>>>>>>>>>>>>>>> installation ,using dkms tools" from the Linmodems >>>>>>>>>>>>>>>>>>>>>> discussion >>>>>>>>>>>>>>>>>>>>>> board >>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the >>>>>>>>>>>>>>>>>>>>>> file >>>>>>>>>>>>>>>>>>>>>> wvtest. >>>>>>>>>>>>>>>>>>>>>> sudo >>>>>>>>>>>>>>>>>>>>>> agrsm-test rescued me. The modem was found on >>>>>>>>>>>>>>>>>>>>>> /dev/ttySAGR. >>>>>>>>>>>>>>>>>>>>>> While >>>>>>>>>>>>>>>>>>>>>> trying >>>>>>>>>>>>>>>>>>>>>> to configure the network tools point to point >>>>>>>>>>>>>>>>>>>>>> connection >>>>>>>>>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>>> lost >>>>>>>>>>>>>>>>>>>>>> the connection and it appears the file /dev/ttySAGR >>>>>>>>>>>>>>>>>>>>>> was >>>>>>>>>>>>>>>>>>>>>> lost >>>>>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>>>>> sudo >>>>>>>>>>>>>>>>>>>>>> agrsm-test brought it right back. I then had to >>>>>>>>>>>>>>>>>>>>>> reenter >>>>>>>>>>>>>>>>>>>>>> my >>>>>>>>>>>>>>>>>>>>>> name, >>>>>>>>>>>>>>>>>>>>>> phone >>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>> PW but it all went pretty smoothly. My hat is off to >>>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>> others >>>>>>>>>>>>>>>>>>>>>> who >>>>>>>>>>>>>>>>>>>>>> have been so patient with all this. Thank You >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Yours truly, John W >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>> >>>>>>> >> >> >
