Antonio in the meantime I made this:
[root@Fedora12 ~]# wvdialconf wvtest
Editing `wvtest'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
WvModem<*1>: Cannot get information for serial port.
ttySL0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySL0<*1>: ATQ0 V1 E1 -- OK
ttySL0<*1>: ATQ0 V1 E1 Z -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
ttySL0<*1>: Speed 19200: AT -- OK
ttySL0<*1>: Speed 38400: AT -- OK
ttySL0<*1>: Speed 57600: AT -- OK
ttySL0<*1>: Speed 115200: AT -- OK
ttySL0<*1>: Speed 230400: AT -- OK
ttySL0<*1>: Speed 460800: AT -- OK
ttySL0<*1>: Max speed is 460800; that should be safe.
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttySL0.
wvtest<Warn>: Can't open 'wvtest' for reading: No such file or directory
wvtest<Warn>: ...starting with blank configuration.
Modem configuration written to wvtest.
ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB3<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
[root@Fedora12 ~]# wvdial --config wvtest
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password.
[root@Fedora12 ~]# wvdial --config wvtest
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDTXXXXXXXXXXXX
--> Waiting for carrier.
ATDT3485665796
NO CARRIER
ERROR
After more
--> No Carrier! Trying again.
--> Sending: ATDTXXXXXXXXXXXX
--> Waiting for carrier.
ATDT3485665796
NO CARRIER
ERROR
I stopped with Crtl+C
Second test with X3 into initialisation string
[root@Fedora12 ~]# wvdial --config wvtest
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDTXXXXXXXXXX
--> Waiting for carrier.
ATDT3485665796
NO CARRIER
ERROR
After more
--> No Carrier! Trying again.
--> Sending: ATDTXXXXXXXXXXXX
--> Waiting for carrier.
ATDT3485665796
NO CARRIER
ERROR
I also stopped with Ctrl+C
I made this test because my /etc/wvdial.conf is completly empty
Arturo
2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
> Arturo,
>
> This part is to check if chkconfig made the symbolic links to slmodemd
> which resides in /etc/rc.d/init.d/
>
> /*
>
> In an other windows ( without press Ctrl+C) I made:
> [root@Fedora12 ~]# for i in 0 1 2 3 4 5 6
> > do
> > ls rc$i.d/*slmodemd*
> >
> and like you see I also wait answer "done"
>
> */
>
> This part above if to be run you should be in /etc/rc.d/ directory to
> see if the symbolic links are created.
>
> Have you tried to connect?
>
> After running this command :
>
> [root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
> SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
> symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.
> modem `slamr0' created. TTY is `/dev/pts/5'
> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> You should fireup another terminal/tab and run
> $ su -
> password:
> # wvdialconf /etc/wvdial.conf
>
> and see that wvdialconf detects /dev/ttySL0 as the modem port and try
> edit /etc/wvdial.conf with your favorite editor and add your
> username/ISP phone number/password and a line
> "Carrier Check = no"
>
> Try to connect if you see "No Carrier" then you have encountered the
> error/trouble that I have encountered before.
>
> Regards,
>
> Antonio
>
> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>> Antonio in one windows I made this:
>>
>> [root@Fedora12 scripts]# mkdir -p /dev
>> [root@Fedora12 scripts]# mknod -m 600 /dev/slamr0 c 242 0
>> [root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
>> SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
>> symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.
>> modem `slamr0' created. TTY is `/dev/pts/5'
>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>
>> In an other windows ( without press Ctrl+C) I made:
>> [root@Fedora12 ~]# for i in 0 1 2 3 4 5 6
>>> do
>>> ls rc$i.d/*slmodemd*
>>>
>> and like you see I also wait answer "done"
>> Arturo
>>
>>
>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>> Arturo,
>>>
>>> If the slmodemd script was successfully installed and upon startup you
>>> still got the message, you might have forgotten to add the commands I
>>> told you to the start{
>>> procedure
>>>
>>> In the meantime, as root (su -)
>>>
>>> mkdir -p /dev
>>> mknod -m 600 /dev/slamr0 c 242 0
>>>
>>> and try the slmodemd -c ITALY /dev/slamr0 command again. Have you
>>> tried to dialout/connect to your ISP? This is the bigger question
>>> that many would like to know(including me).
>>>
>>> Regards,
>>>
>>> Antonio
>>>
>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>> Antonio now I understand not at all. I read in your msg:
>>>>
>>>> (when slmodemd worked) and I made:
>>>>
>>>> [root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
>>>> but this is answer:
>>>> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory
>>>> error: cannot setup device `/dev/slamr0'
>>>>
>>>> I looked if modules are installed:
>>>> [root@Fedora12 scripts]# lsmod
>>>> Module Size Used by
>>>> slamr 429352 0
>>>> ungrab_winmodem 1888 0
>>>>
>>>> into dir /dev there isn't device slamr0
>>>> Excuse me who made this device?
>>>> Arturo
>>>>
>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>> Arturo,
>>>>>
>>>>> This part
>>>>>
>>>>> # for i in 0 1 2 3 4 5 6
>>>>> > do
>>>>> > ls rc$i.d/*slmodemd*
>>>>> > done
>>>>>
>>>>> Is to check if the symbolic links exist or not
>>>>> As root user (su -) type the commands exactly as they appear. Then
>>>>> you should see if they got created or not.
>>>>>
>>>>> As an example in my case (when slmodemd worked):
>>>>>
>>>>> root@localhost rc.d]# for i in 0 1 2 3 4 5 6
>>>>> > do
>>>>> > ls rc$i.d/*slmodemd*
>>>>> > done
>>>>> rc0.d/K10slmodemd
>>>>> rc1.d/K10slmodemd
>>>>> rc2.d/S90slmodemd
>>>>> rc3.d/S90slmodemd
>>>>> rc4.d/S90slmodemd
>>>>> rc5.d/S90slmodemd
>>>>> rc6.d/K10slmodemd
>>>>> [root@localhost rc.d]#
>>>>>
>>>>> [root@localhost rc.d]# chkconfig slmodemd --list
>>>>> slmodemd 0:off 1:off 2:on 3:on 4:on
>>>>> 5:on 6:off
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Antonio
>>>>>
>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>> Antonio at a time I don't understand. Please look:
>>>>>>
>>>>>> [root@Fedora12 scripts]# cp slmodemd /etc/rc.d/init.d/
>>>>>> [root@Fedora12 scripts]# chkconfig slmodemd --add
>>>>>> [root@Fedora12 scripts]# chkconfig slmodemd on
>>>>>> [root@Fedora12 scripts]# cd /etc/rc.d/
>>>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>>>> 7
>>>>>> -bash: syntax error near unexpected token `7'
>>>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>>>> 1
>>>>>> -bash: syntax error near unexpected token `1'
>>>>>> [root@Fedora12 rc.d]# for i in 0
>>>>>>> 1
>>>>>> -bash: syntax error near unexpected token `1'
>>>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>>>> do
>>>>>>> ^C
>>>>>> [root@Fedora12 rc.d]#
>>>>>> Arturo
>>>>>>
>>>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>> Arturo,
>>>>>>>
>>>>>>> In the folder scripts, as root user (su -)
>>>>>>> # cp slmodemd /etc/rc.d/init.d/
>>>>>>>
>>>>>>> # chkconfig slmodemd --add
>>>>>>> # chkconfig slmodemd on
>>>>>>>
>>>>>>> # cd /etc/rc.d/
>>>>>>>
>>>>>>> type exactly as this appears. When you get to 6 press Enter you
>>>>>>> should see a ">" continue with the numbers and type everything there
>>>>>>> pressing enter everytime till you get to done and press Enter you
>>>>>>> should see what is in the above example or something similar.
>>>>>>>
>>>>>>> # for i in 0 1 2 3 4 5 6
>>>>>>> > do
>>>>>>> > ls rc$i.d/*slmodemd*
>>>>>>> > done
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Here's slmodemd script
>>>>>>>
>>>>>>> #!/bin/sh
>>>>>>> #
>>>>>>> # slmodemd: Starts the SmartLink Modem Daemon
>>>>>>> #
>>>>>>> # chkconfig: 345 90 10
>>>>>>> # description: This is the user space part of the SmartLink Modem
>>>>>>> driver
>>>>>>> # processname: slmodemd
>>>>>>> # config: /etc/sysconfig/slmodem
>>>>>>>
>>>>>>> # Source function library.
>>>>>>> . /etc/init.d/functions
>>>>>>>
>>>>>>> prog=slmodemd
>>>>>>> RETVAL=0
>>>>>>>
>>>>>>> # Default configuration
>>>>>>> SLMODEMD_DEVICE=slamr0
>>>>>>> SLMODEMD_COUNTRY=USA
>>>>>>>
>>>>>>> # Source configuration
>>>>>>> CONFIG=/etc/sysconfig/$prog
>>>>>>> if [ -f $CONFIG ]; then
>>>>>>> . $CONFIG
>>>>>>> # override default group and permissions if defined in $CONFIG;
>>>>>>> # other valid options also can be put into SLMODEMD_OPTS
>>>>>>> variable
>>>>>>> [ "$GROUP" ] && SLMODEMD_OPTS="$SLMODEMD_OPTS --group=$GROUP"
>>>>>>> [ "$PERMS" ] && SLMODEMD_OPTS="$SLMODEMD_OPTS --perm=$PERMS"
>>>>>>> fi
>>>>>>>
>>>>>>> # uncomment this if you want this feature (if necessary edit module
>>>>>>> pattern):
>>>>>>> # do not try to start on a kernel which does not support it
>>>>>>> # grep -q 'slamr\..*o' /lib/modules/`uname -r`/modules.dep || exit 0
>>>>>>>
>>>>>>> start() {
>>>>>>> echo -n "Starting SmartLink Modem driver for $SLMODEMD_DEVICE:
>>>>>>> "
>>>>>>> $prog </dev/null >/dev/null 2>/dev/null \
>>>>>>> --country=$SLMODEMD_COUNTRY $SLMODEMD_OPTS
>>>>>>> /dev/$SLMODEMD_DEVICE &
>>>>>>> RETVAL=$?
>>>>>>> [ $RETVAL -eq 0 ] && success $"$prog startup" || failure
>>>>>>> $"$prog startup"
>>>>>>> echo
>>>>>>> [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
>>>>>>> return $RETVAL
>>>>>>> }
>>>>>>>
>>>>>>> stop() {
>>>>>>> echo -n "Shutting down SmartLink Modem driver: "
>>>>>>> killproc $prog
>>>>>>> RETVAL=$?
>>>>>>> [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
>>>>>>> return $RETVAL
>>>>>>> }
>>>>>>>
>>>>>>> # See how we were called.
>>>>>>> case "$1" in
>>>>>>> start)
>>>>>>> start
>>>>>>> ;;
>>>>>>> stop)
>>>>>>> stop
>>>>>>> ;;
>>>>>>> status)
>>>>>>> status $prog
>>>>>>> RETVAL=$?
>>>>>>> ;;
>>>>>>> restart|reload)
>>>>>>> stop
>>>>>>> start
>>>>>>> RETVAL=$?
>>>>>>> ;;
>>>>>>> condrestart)
>>>>>>> if [ -f /var/lock/subsys/$prog ]; then
>>>>>>> stop
>>>>>>> start
>>>>>>> RETVAL=$?
>>>>>>> fi
>>>>>>> ;;
>>>>>>> *)
>>>>>>> echo "*** Usage: $prog {start|stop|status|restart|condrestart}"
>>>>>>> exit 1
>>>>>>> esac
>>>>>>>
>>>>>>> exit $RETVAL
>>>>>>>
>>>>>>>
>>>>>>> Add after start procedure here:
>>>>>>>
>>>>>>> Change COUNTRY from USA to ITALY here:
>>>>>>>
>>>>>>> SLMODEMD_COUNTRY=USA
>>>>>>>
>>>>>>> add code below after start and before " echo -n "Starting
>>>>>>> SmartLink Modem driver for $SLMODEMD_DEVICE: ""
>>>>>>>
>>>>>>> start() {
>>>>>>>
>>>>>>>
>>>>>>> if ! [[ -e $SLMODEMD_DEVICE ]] &> /dev/null; then
>>>>>>> {
>>>>>>> echo -n "Creating devices ..."
>>>>>>> mkdir -p /dev
>>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1 ;
>>>>>>> mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c 242 3 ;
>>>>>>> echo -n
>>>>>>> mknod -m 600 /dev/slusb0 c 243 0 ; mknod -m 600 /dev/slusb1 c 243 1 ;
>>>>>>> mknod -m 600 /dev/slusb2 c 243 2 ; mknod -m 600 /dev/slusb3 c 243 3 ;
>>>>>>> echo -n ||
>>>>>>> {
>>>>>>> echo "failed."
>>>>>>> exit -1
>>>>>>> }
>>>>>>> }
>>>>>>> fi
>>>>>>>
>>>>>>> cat /proc/modules | grep 'ungrab_winmodem' >/dev/null ||
>>>>>>> {
>>>>>>> echo -n "Ungrabbing winmodem from kernel ... "
>>>>>>> modprobe ungrab-winmodem && echo "done." ||
>>>>>>> {
>>>>>>> echo "failed."
>>>>>>> exit -1
>>>>>>> }
>>>>>>> }
>>>>>>> cat /proc/modules | grep 'slamr' >/dev/null ||
>>>>>>> {
>>>>>>> echo -n "Loading SmartLink Modem driver into kernel ... "
>>>>>>> modprobe slamr && echo "done." ||
>>>>>>> {
>>>>>>> echo "failed."
>>>>>>> exit -1
>>>>>>> }
>>>>>>> }
>>>>>>>
>>>>>>> Have you tried to connect yet?
>>>>>>> Let us know if it works or not.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Antonio
>>>>>>>
>>>>>>>
>>>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>> Hi Antonio, GOAL!!!!!!!!!!!!!!
>>>>>>>> Excuse me if I continue with un other question.
>>>>>>>> Now that the modules are installable can you explain me how can I
>>>>>>>> automatically install these two modules and run slmodemd. Like I
>>>>>>>> wrote
>>>>>>>> in previous msg, into /Modem/DOCS/Scripts/ there are slmodemd scripts
>>>>>>>> but I don't know if one is useful and where put it
>>>>>>>> Thanks Arturo
>>>>>>>>
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>>> make -C modem clean && make -C drivers clean && echo "done."
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o
>>>>>>>> modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o
>>>>>>>> modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>>> dp_sinus.o dp_dummy.o sysdep_common.o
>>>>>>>> rm -f *~ *.orig *.rej
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> rm -f kernel-ver slamr.o slamr.ko *st7554.o amrmo_init.o
>>>>>>>> sysdep_amr.o
>>>>>>>> *.mod.* .*.cmd *~ slusb.*
>>>>>>>> rm -f -r .tmp_versions
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> done.
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make
>>>>>>>> KERNEL_VER=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/
>>>>>>>> make -C modem all
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> rebuild profile...
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>> modem_main.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>> modem_cmdline.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>> modem_datafile.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>> modem_at.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>> modem_timer.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>> modem_pack.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>> modem_ec.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>> modem_comp.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>> modem_param.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>> modem_debug.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>> homolog_data.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>> dp_sinus.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>> dp_dummy.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>> sysdep_common.c
>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>> modem_test.c
>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make -C drivers
>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> obj-m=slamr.o
>>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>>> make[2]: Entering directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> CC [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrmo_init.o
>>>>>>>> CC [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
>>>>>>>> LD [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.o
>>>>>>>> Building modules, stage 2.
>>>>>>>> MODPOST 1 modules
>>>>>>>> WARNING: could not find
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>>> CC
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.mod.o
>>>>>>>> LD [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.ko
>>>>>>>> make[2]: Leaving directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> finished all:
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make
>>>>>>>> make -C modem all
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make -C drivers
>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> doing kernel-ver::
>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>> make[2]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> obj-m=slamr.o
>>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>>> make[3]: Entering directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> Building modules, stage 2.
>>>>>>>> MODPOST 1 modules
>>>>>>>> WARNING: could not find
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>>> make[3]: Leaving directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> finished all:
>>>>>>>> make[2]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make install
>>>>>>>> make -C modem all
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make -C drivers
>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> doing kernel-ver::
>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>> make[2]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> obj-m=slamr.o
>>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>>> make[3]: Entering directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> Building modules, stage 2.
>>>>>>>> MODPOST 1 modules
>>>>>>>> WARNING: could not find
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>>> make[3]: Leaving directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> finished all:
>>>>>>>> make[2]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make install -C drivers
>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> doing kernel-ver::
>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>> mkdir -p /dev
>>>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1
>>>>>>>> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
>>>>>>>> 242 3 ; echo -n
>>>>>>>> make install KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>> make[2]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> install -D -m 644 slamr.ko
>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/slamr.ko
>>>>>>>> /sbin/depmod -a
>>>>>>>> make[2]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
>>>>>>>> rm -f -rf /var/lib/slmodem
>>>>>>>> install -d -D -m 755 /var/lib/slmodem
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# modprobe ungrab-winmodem
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# modprobe slamr
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# slmodemd -c ITALY
>>>>>>>> /dev/slamr0
>>>>>>>> SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
>>>>>>>> symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
>>>>>>>> modem `slamr0' created. TTY is `/dev/pts/2'
>>>>>>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>>>>>> ^C[root@Fedora12 slmodem-2.9.11-20090222]#
>>>>>>>>
>>>>>>>>
>>>>>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>>>> Arturo,
>>>>>>>>>
>>>>>>>>> Installation of ungrab-winmodem appears to be installed correctly,
>>>>>>>>> it
>>>>>>>>> is the slmodem-2.9.11-20090222/ code that is not
>>>>>>>>>
>>>>>>>>> Here:
>>>>>>>>>
>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>>>> after you run
>>>>>>>>> make clean
>>>>>>>>>
>>>>>>>>> run
>>>>>>>>>
>>>>>>>>> make KERNEL_VER=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/
>>>>>>>>> make
>>>>>>>>> make install
>>>>>>>>>
>>>>>>>>> then test it with
>>>>>>>>> # modprobe ungrab-winmodem
>>>>>>>>> # modprobe slamr
>>>>>>>>> then
>>>>>>>>> # slmodemd -c ITALY /dev/slamr0
>>>>>>>>>
>>>>>>>>> if you get the error again, try to login with (su -) and not (su) by
>>>>>>>>> itself.
>>>>>>>>>
>>>>>>>>> There have been little to no success reports, maybe you can report
>>>>>>>>> back with a success report?
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Antonio
>>>>>>>>>
>>>>>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>>>> I send un other time to discuss because in my copy first send are
>>>>>>>>>> uncomplete. Sorry.
>>>>>>>>>>
>>>>>>>>>> Hi Antonio, this is what is happened, and really I understand not
>>>>>>>>>> at
>>>>>>>>>> all
>>>>>>>>>>
>>>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]# make
>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/ungrab-winmodem-20090716
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> CC [M]
>>>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.o
>>>>>>>>>> Building modules, stage 2.
>>>>>>>>>> MODPOST 1 modules
>>>>>>>>>> CC
>>>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.mod.o
>>>>>>>>>> LD [M]
>>>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.ko
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>
>>>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]# make install
>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/ungrab-winmodem-20090716
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> Building modules, stage 2.
>>>>>>>>>> MODPOST 1 modules
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> install -D -m 644 ungrab-winmodem.ko
>>>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/ungrab-winmodem.ko
>>>>>>>>>> /sbin/depmod -a
>>>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]#
>>>>>>>>>>
>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>>>>> make -C modem clean && make -C drivers clean && echo "done."
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>>> rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o
>>>>>>>>>> modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o
>>>>>>>>>> modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>>>>> dp_sinus.o dp_dummy.o sysdep_common.o
>>>>>>>>>> rm -f *~ *.orig *.rej
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> rm -f kernel-ver slamr.o slamr.ko *st7554.o amrmo_init.o
>>>>>>>>>> sysdep_amr.o
>>>>>>>>>> *.mod.* .*.cmd *~ slusb.*
>>>>>>>>>> rm -f -r .tmp_versions
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> done.
>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make install
>>>>>>>>>> make -C modem all
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>>> rebuild profile...
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>>>> modem_main.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>>>> modem_cmdline.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>>>> modem_datafile.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>>>> modem_at.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>>>> modem_timer.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>>>> modem_pack.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>>>> modem_ec.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>>>> modem_comp.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>>>> modem_param.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>>>> modem_debug.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>>>> homolog_data.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>>>> dp_sinus.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>>>> dp_dummy.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>>>> sysdep_common.c
>>>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o
>>>>>>>>>> modem_datafile.o
>>>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>>>> modem_test.c
>>>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>>> make -C drivers
>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> doing kernel-ver::
>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> obj-m=slamr.o
>>>>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> CC [M]
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrmo_init.o
>>>>>>>>>> CC [M]
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
>>>>>>>>>> LD [M]
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.o
>>>>>>>>>> Building modules, stage 2.
>>>>>>>>>> MODPOST 1 modules
>>>>>>>>>> WARNING: could not find
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>>>>> for
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>>>>> CC
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.mod.o
>>>>>>>>>> LD [M]
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.ko
>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> finished all:
>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> make install -C drivers
>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> doing kernel-ver::
>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>> mkdir -p /dev
>>>>>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242
>>>>>>>>>> 1
>>>>>>>>>> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
>>>>>>>>>> 242 3 ; echo -n
>>>>>>>>>> make install KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> install -D -m 644 slamr.ko
>>>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/slamr.ko
>>>>>>>>>> /sbin/depmod -a
>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
>>>>>>>>>> rm -f -rf /var/lib/slmodem
>>>>>>>>>> install -d -D -m 755 /var/lib/slmodem
>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]#
>>>>>>>>>>
>>>>>>>>>> [root@Fedora12 Ciornj]# modprobe ungrab-winmodem.ko
>>>>>>>>>> FATAL: Module ungrab_winmodem.ko not found.
>>>>>>>>>> [root@Fedora12 Ciornj]# cd
>>>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/
>>>>>>>>>> [root@Fedora12 extra]# modprobe ./ungrab-winmodem.ko
>>>>>>>>>> FATAL: Module ./ungrab_winmodem.ko not found.
>>>>>>>>>> [root@Fedora12 extra]# insmod ./ungrab-winmodem.ko
>>>>>>>>>> [root@Fedora12 extra]# modprobe ./slamr.ko
>>>>>>>>>> FATAL: Module ./slamr.ko not found.
>>>>>>>>>> [root@Fedora12 extra]# insmod ./slamr.ko
>>>>>>>>>> [root@Fedora12 extra]# lsmod
>>>>>>>>>> Module Size Used by
>>>>>>>>>> slamr 429352 0
>>>>>>>>>> ungrab_winmodem 1888 0
>>>>>>>>>>
>>>>>>>>>> In Smartlink.txt is wrote:
>>>>>>>>>> The modem should setup with:
>>>>>>>>>> modprobe ungrab-winmodem
>>>>>>>>>> modprobe slamr
>>>>>>>>>> slmodemd -c YOUR_COUNTRY /dev/slamr0
>>>>>>>>>> which should announce creation of ports:
>>>>>>>>>> /dev/ttySL0 --> /dev/pts/N , N some number
>>>>>>>>>> Specify the symbolic link /dev/ttySL0 as the port to be used by
>>>>>>>>>> dailer software.
>>>>>>>>>>
>>>>>>>>>> but in my /dev I haven't slamr0 and before modprobe don't mount
>>>>>>>>>> modules how you can read above
>>>>>>>>>>
>>>>>>>>>> And an other question. If with your help I will can run the device
>>>>>>>>>> ttySL0 how I can start automatically the daemon /usr/sbin/slmodemd?
>>>>>>>>>> Into Modem/DOCS/scripts/ I see scripts for more SO but any for
>>>>>>>>>> Fedora.
>>>>>>>>>> Perhaps that for Mandrake is good?
>>>>>>>>>>
>>>>>>>>>> thank you very much for your very appreciate help
>>>>>>>>>> Arturo
>>>>>>>>>>
>>>>>>>>>> 2010/2/28 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>>>>>> Arturo,
>>>>>>>>>>>
>>>>>>>>>>> Sadly as scanModem explains here, the slamr code does not work
>>>>>>>>>>> with
>>>>>>>>>>> 2.6.31.X kernels :(
>>>>>>>>>>>
>>>>>>>>>>> It says 2.8 (it is a typo, means 2.6.31
>>>>>>>>>>> For kernels 2.8.31 the slamr driver is not (yet) functional,
>>>>>>>>>>> failing
>>>>>>>>>>> within at the
>>>>>>>>>>> Carrier Check
>>>>>>>>>>> function. Thus for service, retain a 2.6.30 or earlier kernel.
>>>>>>>>>>>
>>>>>>>>>>> For kernels 2.6.31 the slamr driver is not (yet) functional,
>>>>>>>>>>> failing
>>>>>>>>>>> within at the
>>>>>>>>>>> Carrier Check
>>>>>>>>>>> function. Thus for service, retain a 2.6.30 or earlier kernel.
>>>>>>>>>>>
>>>>>>>>>>> Also, the part about ungrab-winmodem-20090716.tar.gz and
>>>>>>>>>>> slmodemd-2.9.11-20090222.tar.gz was not updated, that is why it
>>>>>>>>>>> says
>>>>>>>>>>> as of October 2007, the packages are:
>>>>>>>>>>>
>>>>>>>>>>> \begin{quote}
>>>>>>>>>>> For 2.6.31.12-174.2.22.fc12.i686 compiling drivers is necessary.
>>>>>>>>>>> As
>>>>>>>>>>> of
>>>>>>>>>>> October 2007 the current packages at
>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ are the
>>>>>>>>>>> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
>>>>>>>>>>> \end{quote}
>>>>>>>>>>>
>>>>>>>>>>> If you want to give it a try and compile the newer sources for
>>>>>>>>>>> both
>>>>>>>>>>> slmodemd and slamr and see in case that it might work, go right
>>>>>>>>>>> ahead
>>>>>>>>>>> and confirm the reports. I have yet to try newer 2.6.32.9 and/or
>>>>>>>>>>> 2.6.33 released kernels, will do so as soon as I have a chance and
>>>>>>>>>>> see
>>>>>>>>>>> if they return functionality to the slamr supported modems.
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Antonio
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 2/28/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>>>>>> I trying to install driver for my modem but I receive this error:
>>>>>>>>>>>>
>>>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]# make
>>>>>>>>>>>> make -C modem all
>>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>>> rebuild profile...
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>>>>>> modem_main.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>>>>>> modem_cmdline.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>>>>>> modem_datafile.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>>>>>> modem_at.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>>>>>> modem_timer.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>>>>>> modem_pack.c
>>>>>>>>>>>> modem_pack.c: In function ‘modem_async_get_bits’:
>>>>>>>>>>>> modem_pack.c:100: warning: pointer targets in passing argument 2
>>>>>>>>>>>> of
>>>>>>>>>>>> ‘m->get_chars’ differ in signedness
>>>>>>>>>>>> modem_pack.c:100: note: expected ‘char *’ but argument is of type
>>>>>>>>>>>> ‘u8
>>>>>>>>>>>> *’
>>>>>>>>>>>> modem_pack.c: In function ‘modem_async_put_bits’:
>>>>>>>>>>>> modem_pack.c:148: warning: pointer targets in passing argument 2
>>>>>>>>>>>> of
>>>>>>>>>>>> ‘m->put_chars’ differ in signedness
>>>>>>>>>>>> modem_pack.c:148: note: expected ‘const char *’ but argument is
>>>>>>>>>>>> of
>>>>>>>>>>>> type
>>>>>>>>>>>> ‘u8
>>>>>>>>>>>> *’
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>>>>>> modem_ec.c
>>>>>>>>>>>> modem_ec.c: In function ‘tx_info’:
>>>>>>>>>>>> modem_ec.c:723: warning: pointer targets in passing argument 2 of
>>>>>>>>>>>> ‘l->modem->get_chars’ differ in signedness
>>>>>>>>>>>> modem_ec.c:723: note: expected ‘char *’ but argument is of type
>>>>>>>>>>>> ‘u8
>>>>>>>>>>>> *’
>>>>>>>>>>>> modem_ec.c: In function ‘push_rest_data’:
>>>>>>>>>>>> modem_ec.c:811: warning: pointer targets in passing argument 2 of
>>>>>>>>>>>> ‘l->modem->put_chars’ differ in signedness
>>>>>>>>>>>> modem_ec.c:811: note: expected ‘const char *’ but argument is of
>>>>>>>>>>>> type
>>>>>>>>>>>> ‘u8
>>>>>>>>>>>> *’
>>>>>>>>>>>> modem_ec.c: In function ‘rx_info’:
>>>>>>>>>>>> modem_ec.c:860: warning: pointer targets in passing argument 2 of
>>>>>>>>>>>> ‘l->modem->put_chars’ differ in signedness
>>>>>>>>>>>> modem_ec.c:860: note: expected ‘const char *’ but argument is of
>>>>>>>>>>>> type
>>>>>>>>>>>> ‘u8
>>>>>>>>>>>> *’
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>>>>>> modem_comp.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>>>>>> modem_param.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>>>>>> modem_debug.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>>>>>> homolog_data.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>>>>>> dp_sinus.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>>>>>> dp_dummy.c
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>>>>>> sysdep_common.c
>>>>>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o
>>>>>>>>>>>> modem_datafile.o
>>>>>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>>>>>> modem_test.c
>>>>>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>>>>>>> dp_sinus.o
>>>>>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>>> make -C drivers
>>>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers
>>>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>>> CC [M]
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:
>>>>>>>>>>>> In function ‘amrmo_pci_probe’:
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>>> error: ‘SA_SHIRQ’ undeclared (first use in this function)
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>>> error: (Each undeclared identifier is reported only once
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>>> error: for each function it appears in.)
>>>>>>>>>>>> make[4]: ***
>>>>>>>>>>>> [/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o]
>>>>>>>>>>>> Error 1
>>>>>>>>>>>> make[3]: ***
>>>>>>>>>>>> [_module_/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers]
>>>>>>>>>>>> Error 2
>>>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>>> make[2]: *** [all] Error 2
>>>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> make[1]: *** [all] Error 2
>>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> make: *** [drivers] Error 2
>>>>>>>>>>>>
>>>>>>>>>>>> And with make install
>>>>>>>>>>>>
>>>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]# make install
>>>>>>>>>>>> make -C modem all
>>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>>> make -C drivers
>>>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers
>>>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>>> CC [M]
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:
>>>>>>>>>>>> In function ‘amrmo_pci_probe’:
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>>> error: ‘SA_SHIRQ’ undeclared (first use in this function)
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>>> error: (Each undeclared identifier is reported only once
>>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>>> error: for each function it appears in.)
>>>>>>>>>>>> make[4]: ***
>>>>>>>>>>>> [/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o]
>>>>>>>>>>>> Error 1
>>>>>>>>>>>> make[3]: ***
>>>>>>>>>>>> [_module_/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers]
>>>>>>>>>>>> Error 2
>>>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>>> make[2]: *** [all] Error 2
>>>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> make[1]: *** [all] Error 2
>>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>>> make: *** [drivers] Error 2
>>>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]#
>>>>>>>>>>>>
>>>>>>>>>>>> thanks for your help
>>>>>>>>>>>> Arturo
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
