Antonio in one windows I made this:
[root@Fedora12 scripts]# mkdir -p /dev
[root@Fedora12 scripts]# mknod -m 600 /dev/slamr0 c 242 0
[root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.
modem `slamr0' created. TTY is `/dev/pts/5'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
In an other windows ( without press Ctrl+C) I made:
[root@Fedora12 ~]# for i in 0 1 2 3 4 5 6
> do
> ls rc$i.d/*slmodemd*
>
and like you see I also wait answer "done"
Arturo
2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
> Arturo,
>
> If the slmodemd script was successfully installed and upon startup you
> still got the message, you might have forgotten to add the commands I
> told you to the start{
> procedure
>
> In the meantime, as root (su -)
>
> mkdir -p /dev
> mknod -m 600 /dev/slamr0 c 242 0
>
> and try the slmodemd -c ITALY /dev/slamr0 command again. Have you
> tried to dialout/connect to your ISP? This is the bigger question
> that many would like to know(including me).
>
> Regards,
>
> Antonio
>
> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>> Antonio now I understand not at all. I read in your msg:
>>
>> (when slmodemd worked) and I made:
>>
>> [root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
>> but this is answer:
>> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory
>> error: cannot setup device `/dev/slamr0'
>>
>> I looked if modules are installed:
>> [root@Fedora12 scripts]# lsmod
>> Module Size Used by
>> slamr 429352 0
>> ungrab_winmodem 1888 0
>>
>> into dir /dev there isn't device slamr0
>> Excuse me who made this device?
>> Arturo
>>
>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>> Arturo,
>>>
>>> This part
>>>
>>> # for i in 0 1 2 3 4 5 6
>>> > do
>>> > ls rc$i.d/*slmodemd*
>>> > done
>>>
>>> Is to check if the symbolic links exist or not
>>> As root user (su -) type the commands exactly as they appear. Then
>>> you should see if they got created or not.
>>>
>>> As an example in my case (when slmodemd worked):
>>>
>>> root@localhost rc.d]# for i in 0 1 2 3 4 5 6
>>> > do
>>> > ls rc$i.d/*slmodemd*
>>> > done
>>> rc0.d/K10slmodemd
>>> rc1.d/K10slmodemd
>>> rc2.d/S90slmodemd
>>> rc3.d/S90slmodemd
>>> rc4.d/S90slmodemd
>>> rc5.d/S90slmodemd
>>> rc6.d/K10slmodemd
>>> [root@localhost rc.d]#
>>>
>>> [root@localhost rc.d]# chkconfig slmodemd --list
>>> slmodemd 0:off 1:off 2:on 3:on 4:on
>>> 5:on 6:off
>>>
>>>
>>> Regards,
>>>
>>> Antonio
>>>
>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>> Antonio at a time I don't understand. Please look:
>>>>
>>>> [root@Fedora12 scripts]# cp slmodemd /etc/rc.d/init.d/
>>>> [root@Fedora12 scripts]# chkconfig slmodemd --add
>>>> [root@Fedora12 scripts]# chkconfig slmodemd on
>>>> [root@Fedora12 scripts]# cd /etc/rc.d/
>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>> 7
>>>> -bash: syntax error near unexpected token `7'
>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>> 1
>>>> -bash: syntax error near unexpected token `1'
>>>> [root@Fedora12 rc.d]# for i in 0
>>>>> 1
>>>> -bash: syntax error near unexpected token `1'
>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>> do
>>>>> ^C
>>>> [root@Fedora12 rc.d]#
>>>> Arturo
>>>>
>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>> Arturo,
>>>>>
>>>>> In the folder scripts, as root user (su -)
>>>>> # cp slmodemd /etc/rc.d/init.d/
>>>>>
>>>>> # chkconfig slmodemd --add
>>>>> # chkconfig slmodemd on
>>>>>
>>>>> # cd /etc/rc.d/
>>>>>
>>>>> type exactly as this appears. When you get to 6 press Enter you
>>>>> should see a ">" continue with the numbers and type everything there
>>>>> pressing enter everytime till you get to done and press Enter you
>>>>> should see what is in the above example or something similar.
>>>>>
>>>>> # for i in 0 1 2 3 4 5 6
>>>>> > do
>>>>> > ls rc$i.d/*slmodemd*
>>>>> > done
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Here's slmodemd script
>>>>>
>>>>> #!/bin/sh
>>>>> #
>>>>> # slmodemd: Starts the SmartLink Modem Daemon
>>>>> #
>>>>> # chkconfig: 345 90 10
>>>>> # description: This is the user space part of the SmartLink Modem driver
>>>>> # processname: slmodemd
>>>>> # config: /etc/sysconfig/slmodem
>>>>>
>>>>> # Source function library.
>>>>> . /etc/init.d/functions
>>>>>
>>>>> prog=slmodemd
>>>>> RETVAL=0
>>>>>
>>>>> # Default configuration
>>>>> SLMODEMD_DEVICE=slamr0
>>>>> SLMODEMD_COUNTRY=USA
>>>>>
>>>>> # Source configuration
>>>>> CONFIG=/etc/sysconfig/$prog
>>>>> if [ -f $CONFIG ]; then
>>>>> . $CONFIG
>>>>> # override default group and permissions if defined in $CONFIG;
>>>>> # other valid options also can be put into SLMODEMD_OPTS variable
>>>>> [ "$GROUP" ] && SLMODEMD_OPTS="$SLMODEMD_OPTS --group=$GROUP"
>>>>> [ "$PERMS" ] && SLMODEMD_OPTS="$SLMODEMD_OPTS --perm=$PERMS"
>>>>> fi
>>>>>
>>>>> # uncomment this if you want this feature (if necessary edit module
>>>>> pattern):
>>>>> # do not try to start on a kernel which does not support it
>>>>> # grep -q 'slamr\..*o' /lib/modules/`uname -r`/modules.dep || exit 0
>>>>>
>>>>> start() {
>>>>> echo -n "Starting SmartLink Modem driver for $SLMODEMD_DEVICE: "
>>>>> $prog </dev/null >/dev/null 2>/dev/null \
>>>>> --country=$SLMODEMD_COUNTRY $SLMODEMD_OPTS
>>>>> /dev/$SLMODEMD_DEVICE &
>>>>> RETVAL=$?
>>>>> [ $RETVAL -eq 0 ] && success $"$prog startup" || failure
>>>>> $"$prog startup"
>>>>> echo
>>>>> [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
>>>>> return $RETVAL
>>>>> }
>>>>>
>>>>> stop() {
>>>>> echo -n "Shutting down SmartLink Modem driver: "
>>>>> killproc $prog
>>>>> RETVAL=$?
>>>>> [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
>>>>> return $RETVAL
>>>>> }
>>>>>
>>>>> # See how we were called.
>>>>> case "$1" in
>>>>> start)
>>>>> start
>>>>> ;;
>>>>> stop)
>>>>> stop
>>>>> ;;
>>>>> status)
>>>>> status $prog
>>>>> RETVAL=$?
>>>>> ;;
>>>>> restart|reload)
>>>>> stop
>>>>> start
>>>>> RETVAL=$?
>>>>> ;;
>>>>> condrestart)
>>>>> if [ -f /var/lock/subsys/$prog ]; then
>>>>> stop
>>>>> start
>>>>> RETVAL=$?
>>>>> fi
>>>>> ;;
>>>>> *)
>>>>> echo "*** Usage: $prog {start|stop|status|restart|condrestart}"
>>>>> exit 1
>>>>> esac
>>>>>
>>>>> exit $RETVAL
>>>>>
>>>>>
>>>>> Add after start procedure here:
>>>>>
>>>>> Change COUNTRY from USA to ITALY here:
>>>>>
>>>>> SLMODEMD_COUNTRY=USA
>>>>>
>>>>> add code below after start and before " echo -n "Starting
>>>>> SmartLink Modem driver for $SLMODEMD_DEVICE: ""
>>>>>
>>>>> start() {
>>>>>
>>>>>
>>>>> if ! [[ -e $SLMODEMD_DEVICE ]] &> /dev/null; then
>>>>> {
>>>>> echo -n "Creating devices ..."
>>>>> mkdir -p /dev
>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1 ;
>>>>> mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c 242 3 ;
>>>>> echo -n
>>>>> mknod -m 600 /dev/slusb0 c 243 0 ; mknod -m 600 /dev/slusb1 c 243 1 ;
>>>>> mknod -m 600 /dev/slusb2 c 243 2 ; mknod -m 600 /dev/slusb3 c 243 3 ;
>>>>> echo -n ||
>>>>> {
>>>>> echo "failed."
>>>>> exit -1
>>>>> }
>>>>> }
>>>>> fi
>>>>>
>>>>> cat /proc/modules | grep 'ungrab_winmodem' >/dev/null ||
>>>>> {
>>>>> echo -n "Ungrabbing winmodem from kernel ... "
>>>>> modprobe ungrab-winmodem && echo "done." ||
>>>>> {
>>>>> echo "failed."
>>>>> exit -1
>>>>> }
>>>>> }
>>>>> cat /proc/modules | grep 'slamr' >/dev/null ||
>>>>> {
>>>>> echo -n "Loading SmartLink Modem driver into kernel ... "
>>>>> modprobe slamr && echo "done." ||
>>>>> {
>>>>> echo "failed."
>>>>> exit -1
>>>>> }
>>>>> }
>>>>>
>>>>> Have you tried to connect yet?
>>>>> Let us know if it works or not.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Antonio
>>>>>
>>>>>
>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>> Hi Antonio, GOAL!!!!!!!!!!!!!!
>>>>>> Excuse me if I continue with un other question.
>>>>>> Now that the modules are installable can you explain me how can I
>>>>>> automatically install these two modules and run slmodemd. Like I wrote
>>>>>> in previous msg, into /Modem/DOCS/Scripts/ there are slmodemd scripts
>>>>>> but I don't know if one is useful and where put it
>>>>>> Thanks Arturo
>>>>>>
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>> make -C modem clean && make -C drivers clean && echo "done."
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o
>>>>>> modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o
>>>>>> modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>> dp_sinus.o dp_dummy.o sysdep_common.o
>>>>>> rm -f *~ *.orig *.rej
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> rm -f kernel-ver slamr.o slamr.ko *st7554.o amrmo_init.o sysdep_amr.o
>>>>>> *.mod.* .*.cmd *~ slusb.*
>>>>>> rm -f -r .tmp_versions
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> done.
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make
>>>>>> KERNEL_VER=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/
>>>>>> make -C modem all
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> rebuild profile...
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>> modem_main.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>> modem_cmdline.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>> modem_datafile.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>> modem_timer.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>> modem_pack.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>> modem_comp.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>> modem_param.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>> modem_debug.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>> homolog_data.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>> sysdep_common.c
>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>> dsplibs.o sysdep_common.o
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>> modem_test.c
>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> make -C drivers
>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> obj-m=slamr.o
>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>> make[2]: Entering directory
>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>> CC [M]
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrmo_init.o
>>>>>> CC [M]
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
>>>>>> LD [M]
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.o
>>>>>> Building modules, stage 2.
>>>>>> MODPOST 1 modules
>>>>>> WARNING: could not find
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>> CC
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.mod.o
>>>>>> LD [M]
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.ko
>>>>>> make[2]: Leaving directory
>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>> finished all:
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make
>>>>>> make -C modem all
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> make -C drivers
>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> doing kernel-ver::
>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>> kernel-ver kernel-ver.c
>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>> make[2]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> obj-m=slamr.o
>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>> make[3]: Entering directory
>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>> Building modules, stage 2.
>>>>>> MODPOST 1 modules
>>>>>> WARNING: could not find
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>> make[3]: Leaving directory
>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>> finished all:
>>>>>> make[2]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make install
>>>>>> make -C modem all
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>> make -C drivers
>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> doing kernel-ver::
>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>> kernel-ver kernel-ver.c
>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>> make[2]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> obj-m=slamr.o
>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>> make[3]: Entering directory
>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>> Building modules, stage 2.
>>>>>> MODPOST 1 modules
>>>>>> WARNING: could not find
>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>> make[3]: Leaving directory
>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>> finished all:
>>>>>> make[2]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> make install -C drivers
>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>> make[1]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> doing kernel-ver::
>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>> kernel-ver kernel-ver.c
>>>>>> mkdir -p /dev
>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1
>>>>>> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
>>>>>> 242 3 ; echo -n
>>>>>> make install KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>> make[2]: Entering directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> install -D -m 644 slamr.ko
>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/slamr.ko
>>>>>> /sbin/depmod -a
>>>>>> make[2]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> make[1]: Leaving directory
>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
>>>>>> rm -f -rf /var/lib/slmodem
>>>>>> install -d -D -m 755 /var/lib/slmodem
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# modprobe ungrab-winmodem
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# modprobe slamr
>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# slmodemd -c ITALY /dev/slamr0
>>>>>> SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
>>>>>> symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
>>>>>> modem `slamr0' created. TTY is `/dev/pts/2'
>>>>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>>>> ^C[root@Fedora12 slmodem-2.9.11-20090222]#
>>>>>>
>>>>>>
>>>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>> Arturo,
>>>>>>>
>>>>>>> Installation of ungrab-winmodem appears to be installed correctly, it
>>>>>>> is the slmodem-2.9.11-20090222/ code that is not
>>>>>>>
>>>>>>> Here:
>>>>>>>
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>> after you run
>>>>>>> make clean
>>>>>>>
>>>>>>> run
>>>>>>>
>>>>>>> make KERNEL_VER=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/
>>>>>>> make
>>>>>>> make install
>>>>>>>
>>>>>>> then test it with
>>>>>>> # modprobe ungrab-winmodem
>>>>>>> # modprobe slamr
>>>>>>> then
>>>>>>> # slmodemd -c ITALY /dev/slamr0
>>>>>>>
>>>>>>> if you get the error again, try to login with (su -) and not (su) by
>>>>>>> itself.
>>>>>>>
>>>>>>> There have been little to no success reports, maybe you can report
>>>>>>> back with a success report?
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Antonio
>>>>>>>
>>>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>> I send un other time to discuss because in my copy first send are
>>>>>>>> uncomplete. Sorry.
>>>>>>>>
>>>>>>>> Hi Antonio, this is what is happened, and really I understand not at
>>>>>>>> all
>>>>>>>>
>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]# make
>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> SUBDIRS=/home/Ciornj/Documents/ungrab-winmodem-20090716
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> CC [M]
>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.o
>>>>>>>> Building modules, stage 2.
>>>>>>>> MODPOST 1 modules
>>>>>>>> CC
>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.mod.o
>>>>>>>> LD [M]
>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.ko
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>
>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]# make install
>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> SUBDIRS=/home/Ciornj/Documents/ungrab-winmodem-20090716
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> Building modules, stage 2.
>>>>>>>> MODPOST 1 modules
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> install -D -m 644 ungrab-winmodem.ko
>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/ungrab-winmodem.ko
>>>>>>>> /sbin/depmod -a
>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]#
>>>>>>>>
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>>> make -C modem clean && make -C drivers clean && echo "done."
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o
>>>>>>>> modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o
>>>>>>>> modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>>> dp_sinus.o dp_dummy.o sysdep_common.o
>>>>>>>> rm -f *~ *.orig *.rej
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> rm -f kernel-ver slamr.o slamr.ko *st7554.o amrmo_init.o
>>>>>>>> sysdep_amr.o
>>>>>>>> *.mod.* .*.cmd *~ slusb.*
>>>>>>>> rm -f -r .tmp_versions
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> done.
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make install
>>>>>>>> make -C modem all
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> rebuild profile...
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>> modem_main.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>> modem_cmdline.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>> modem_datafile.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>> modem_at.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>> modem_timer.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>> modem_pack.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>> modem_ec.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>> modem_comp.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>> modem_param.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>> modem_debug.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>> homolog_data.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>> dp_sinus.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>> dp_dummy.c
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>> sysdep_common.c
>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>> modem_test.c
>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>> make -C drivers
>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> doing kernel-ver::
>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>> make[2]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> obj-m=slamr.o
>>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>>> make[3]: Entering directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> CC [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrmo_init.o
>>>>>>>> CC [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
>>>>>>>> LD [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.o
>>>>>>>> Building modules, stage 2.
>>>>>>>> MODPOST 1 modules
>>>>>>>> WARNING: could not find
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>>> CC
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.mod.o
>>>>>>>> LD [M]
>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.ko
>>>>>>>> make[3]: Leaving directory
>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>> finished all:
>>>>>>>> make[2]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make install -C drivers
>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>> make[1]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> doing kernel-ver::
>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>> mkdir -p /dev
>>>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1
>>>>>>>> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
>>>>>>>> 242 3 ; echo -n
>>>>>>>> make install KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>> make[2]: Entering directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> install -D -m 644 slamr.ko
>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/slamr.ko
>>>>>>>> /sbin/depmod -a
>>>>>>>> make[2]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> make[1]: Leaving directory
>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
>>>>>>>> rm -f -rf /var/lib/slmodem
>>>>>>>> install -d -D -m 755 /var/lib/slmodem
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]#
>>>>>>>>
>>>>>>>> [root@Fedora12 Ciornj]# modprobe ungrab-winmodem.ko
>>>>>>>> FATAL: Module ungrab_winmodem.ko not found.
>>>>>>>> [root@Fedora12 Ciornj]# cd
>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/
>>>>>>>> [root@Fedora12 extra]# modprobe ./ungrab-winmodem.ko
>>>>>>>> FATAL: Module ./ungrab_winmodem.ko not found.
>>>>>>>> [root@Fedora12 extra]# insmod ./ungrab-winmodem.ko
>>>>>>>> [root@Fedora12 extra]# modprobe ./slamr.ko
>>>>>>>> FATAL: Module ./slamr.ko not found.
>>>>>>>> [root@Fedora12 extra]# insmod ./slamr.ko
>>>>>>>> [root@Fedora12 extra]# lsmod
>>>>>>>> Module Size Used by
>>>>>>>> slamr 429352 0
>>>>>>>> ungrab_winmodem 1888 0
>>>>>>>>
>>>>>>>> In Smartlink.txt is wrote:
>>>>>>>> The modem should setup with:
>>>>>>>> modprobe ungrab-winmodem
>>>>>>>> modprobe slamr
>>>>>>>> slmodemd -c YOUR_COUNTRY /dev/slamr0
>>>>>>>> which should announce creation of ports:
>>>>>>>> /dev/ttySL0 --> /dev/pts/N , N some number
>>>>>>>> Specify the symbolic link /dev/ttySL0 as the port to be used by
>>>>>>>> dailer software.
>>>>>>>>
>>>>>>>> but in my /dev I haven't slamr0 and before modprobe don't mount
>>>>>>>> modules how you can read above
>>>>>>>>
>>>>>>>> And an other question. If with your help I will can run the device
>>>>>>>> ttySL0 how I can start automatically the daemon /usr/sbin/slmodemd?
>>>>>>>> Into Modem/DOCS/scripts/ I see scripts for more SO but any for
>>>>>>>> Fedora.
>>>>>>>> Perhaps that for Mandrake is good?
>>>>>>>>
>>>>>>>> thank you very much for your very appreciate help
>>>>>>>> Arturo
>>>>>>>>
>>>>>>>> 2010/2/28 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>>>> Arturo,
>>>>>>>>>
>>>>>>>>> Sadly as scanModem explains here, the slamr code does not work with
>>>>>>>>> 2.6.31.X kernels :(
>>>>>>>>>
>>>>>>>>> It says 2.8 (it is a typo, means 2.6.31
>>>>>>>>> For kernels 2.8.31 the slamr driver is not (yet) functional, failing
>>>>>>>>> within at the
>>>>>>>>> Carrier Check
>>>>>>>>> function. Thus for service, retain a 2.6.30 or earlier kernel.
>>>>>>>>>
>>>>>>>>> For kernels 2.6.31 the slamr driver is not (yet) functional, failing
>>>>>>>>> within at the
>>>>>>>>> Carrier Check
>>>>>>>>> function. Thus for service, retain a 2.6.30 or earlier kernel.
>>>>>>>>>
>>>>>>>>> Also, the part about ungrab-winmodem-20090716.tar.gz and
>>>>>>>>> slmodemd-2.9.11-20090222.tar.gz was not updated, that is why it says
>>>>>>>>> as of October 2007, the packages are:
>>>>>>>>>
>>>>>>>>> \begin{quote}
>>>>>>>>> For 2.6.31.12-174.2.22.fc12.i686 compiling drivers is necessary. As
>>>>>>>>> of
>>>>>>>>> October 2007 the current packages at
>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ are the
>>>>>>>>> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
>>>>>>>>> \end{quote}
>>>>>>>>>
>>>>>>>>> If you want to give it a try and compile the newer sources for both
>>>>>>>>> slmodemd and slamr and see in case that it might work, go right
>>>>>>>>> ahead
>>>>>>>>> and confirm the reports. I have yet to try newer 2.6.32.9 and/or
>>>>>>>>> 2.6.33 released kernels, will do so as soon as I have a chance and
>>>>>>>>> see
>>>>>>>>> if they return functionality to the slamr supported modems.
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Antonio
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 2/28/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>>>> I trying to install driver for my modem but I receive this error:
>>>>>>>>>>
>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]# make
>>>>>>>>>> make -C modem all
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>> rebuild profile...
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>>>> modem_main.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>>>> modem_cmdline.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>>>> modem_datafile.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>>>> modem_at.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>>>> modem_timer.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>>>> modem_pack.c
>>>>>>>>>> modem_pack.c: In function ‘modem_async_get_bits’:
>>>>>>>>>> modem_pack.c:100: warning: pointer targets in passing argument 2 of
>>>>>>>>>> ‘m->get_chars’ differ in signedness
>>>>>>>>>> modem_pack.c:100: note: expected ‘char *’ but argument is of type
>>>>>>>>>> ‘u8
>>>>>>>>>> *’
>>>>>>>>>> modem_pack.c: In function ‘modem_async_put_bits’:
>>>>>>>>>> modem_pack.c:148: warning: pointer targets in passing argument 2 of
>>>>>>>>>> ‘m->put_chars’ differ in signedness
>>>>>>>>>> modem_pack.c:148: note: expected ‘const char *’ but argument is of
>>>>>>>>>> type
>>>>>>>>>> ‘u8
>>>>>>>>>> *’
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>>>> modem_ec.c
>>>>>>>>>> modem_ec.c: In function ‘tx_info’:
>>>>>>>>>> modem_ec.c:723: warning: pointer targets in passing argument 2 of
>>>>>>>>>> ‘l->modem->get_chars’ differ in signedness
>>>>>>>>>> modem_ec.c:723: note: expected ‘char *’ but argument is of type ‘u8
>>>>>>>>>> *’
>>>>>>>>>> modem_ec.c: In function ‘push_rest_data’:
>>>>>>>>>> modem_ec.c:811: warning: pointer targets in passing argument 2 of
>>>>>>>>>> ‘l->modem->put_chars’ differ in signedness
>>>>>>>>>> modem_ec.c:811: note: expected ‘const char *’ but argument is of
>>>>>>>>>> type
>>>>>>>>>> ‘u8
>>>>>>>>>> *’
>>>>>>>>>> modem_ec.c: In function ‘rx_info’:
>>>>>>>>>> modem_ec.c:860: warning: pointer targets in passing argument 2 of
>>>>>>>>>> ‘l->modem->put_chars’ differ in signedness
>>>>>>>>>> modem_ec.c:860: note: expected ‘const char *’ but argument is of
>>>>>>>>>> type
>>>>>>>>>> ‘u8
>>>>>>>>>> *’
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>>>> modem_comp.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>>>> modem_param.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>>>> modem_debug.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>>>> homolog_data.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>>>> dp_sinus.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>>>> dp_dummy.c
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>>>> sysdep_common.c
>>>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o
>>>>>>>>>> modem_datafile.o
>>>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>>>> modem_test.c
>>>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>> make -C drivers
>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers
>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> CC [M]
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:
>>>>>>>>>> In function ‘amrmo_pci_probe’:
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>> error: ‘SA_SHIRQ’ undeclared (first use in this function)
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>> error: (Each undeclared identifier is reported only once
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>> error: for each function it appears in.)
>>>>>>>>>> make[4]: ***
>>>>>>>>>> [/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o]
>>>>>>>>>> Error 1
>>>>>>>>>> make[3]: ***
>>>>>>>>>> [_module_/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers]
>>>>>>>>>> Error 2
>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> make[2]: *** [all] Error 2
>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> make[1]: *** [all] Error 2
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> make: *** [drivers] Error 2
>>>>>>>>>>
>>>>>>>>>> And with make install
>>>>>>>>>>
>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]# make install
>>>>>>>>>> make -C modem all
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>> make -C drivers
>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers
>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> CC [M]
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:
>>>>>>>>>> In function ‘amrmo_pci_probe’:
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>> error: ‘SA_SHIRQ’ undeclared (first use in this function)
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>> error: (Each undeclared identifier is reported only once
>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>> error: for each function it appears in.)
>>>>>>>>>> make[4]: ***
>>>>>>>>>> [/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o]
>>>>>>>>>> Error 1
>>>>>>>>>> make[3]: ***
>>>>>>>>>> [_module_/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers]
>>>>>>>>>> Error 2
>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>> make[2]: *** [all] Error 2
>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> make[1]: *** [all] Error 2
>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>> make: *** [drivers] Error 2
>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]#
>>>>>>>>>>
>>>>>>>>>> thanks for your help
>>>>>>>>>> Arturo
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
