Arturo,
This part is to check if chkconfig made the symbolic links to slmodemd
which resides in /etc/rc.d/init.d/
/*
In an other windows ( without press Ctrl+C) I made:
[root@Fedora12 ~]# for i in 0 1 2 3 4 5 6
> do
> ls rc$i.d/*slmodemd*
>
and like you see I also wait answer "done"
*/
This part above if to be run you should be in /etc/rc.d/ directory to
see if the symbolic links are created.
Have you tried to connect?
After running this command :
[root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.
modem `slamr0' created. TTY is `/dev/pts/5'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
You should fireup another terminal/tab and run
$ su -
password:
# wvdialconf /etc/wvdial.conf
and see that wvdialconf detects /dev/ttySL0 as the modem port and try
edit /etc/wvdial.conf with your favorite editor and add your
username/ISP phone number/password and a line
"Carrier Check = no"
Try to connect if you see "No Carrier" then you have encountered the
error/trouble that I have encountered before.
Regards,
Antonio
On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
> Antonio in one windows I made this:
>
> [root@Fedora12 scripts]# mkdir -p /dev
> [root@Fedora12 scripts]# mknod -m 600 /dev/slamr0 c 242 0
> [root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
> SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
> symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.
> modem `slamr0' created. TTY is `/dev/pts/5'
> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> In an other windows ( without press Ctrl+C) I made:
> [root@Fedora12 ~]# for i in 0 1 2 3 4 5 6
>> do
>> ls rc$i.d/*slmodemd*
>>
> and like you see I also wait answer "done"
> Arturo
>
>
> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>> Arturo,
>>
>> If the slmodemd script was successfully installed and upon startup you
>> still got the message, you might have forgotten to add the commands I
>> told you to the start{
>> procedure
>>
>> In the meantime, as root (su -)
>>
>> mkdir -p /dev
>> mknod -m 600 /dev/slamr0 c 242 0
>>
>> and try the slmodemd -c ITALY /dev/slamr0 command again. Have you
>> tried to dialout/connect to your ISP? This is the bigger question
>> that many would like to know(including me).
>>
>> Regards,
>>
>> Antonio
>>
>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>> Antonio now I understand not at all. I read in your msg:
>>>
>>> (when slmodemd worked) and I made:
>>>
>>> [root@Fedora12 scripts]# slmodemd -c ITALY /dev/slamr0
>>> but this is answer:
>>> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory
>>> error: cannot setup device `/dev/slamr0'
>>>
>>> I looked if modules are installed:
>>> [root@Fedora12 scripts]# lsmod
>>> Module Size Used by
>>> slamr 429352 0
>>> ungrab_winmodem 1888 0
>>>
>>> into dir /dev there isn't device slamr0
>>> Excuse me who made this device?
>>> Arturo
>>>
>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>> Arturo,
>>>>
>>>> This part
>>>>
>>>> # for i in 0 1 2 3 4 5 6
>>>> > do
>>>> > ls rc$i.d/*slmodemd*
>>>> > done
>>>>
>>>> Is to check if the symbolic links exist or not
>>>> As root user (su -) type the commands exactly as they appear. Then
>>>> you should see if they got created or not.
>>>>
>>>> As an example in my case (when slmodemd worked):
>>>>
>>>> root@localhost rc.d]# for i in 0 1 2 3 4 5 6
>>>> > do
>>>> > ls rc$i.d/*slmodemd*
>>>> > done
>>>> rc0.d/K10slmodemd
>>>> rc1.d/K10slmodemd
>>>> rc2.d/S90slmodemd
>>>> rc3.d/S90slmodemd
>>>> rc4.d/S90slmodemd
>>>> rc5.d/S90slmodemd
>>>> rc6.d/K10slmodemd
>>>> [root@localhost rc.d]#
>>>>
>>>> [root@localhost rc.d]# chkconfig slmodemd --list
>>>> slmodemd 0:off 1:off 2:on 3:on 4:on
>>>> 5:on 6:off
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Antonio
>>>>
>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>> Antonio at a time I don't understand. Please look:
>>>>>
>>>>> [root@Fedora12 scripts]# cp slmodemd /etc/rc.d/init.d/
>>>>> [root@Fedora12 scripts]# chkconfig slmodemd --add
>>>>> [root@Fedora12 scripts]# chkconfig slmodemd on
>>>>> [root@Fedora12 scripts]# cd /etc/rc.d/
>>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>>> 7
>>>>> -bash: syntax error near unexpected token `7'
>>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>>> 1
>>>>> -bash: syntax error near unexpected token `1'
>>>>> [root@Fedora12 rc.d]# for i in 0
>>>>>> 1
>>>>> -bash: syntax error near unexpected token `1'
>>>>> [root@Fedora12 rc.d]# for i in 0 1 2 3 4 5 6
>>>>>> do
>>>>>> ^C
>>>>> [root@Fedora12 rc.d]#
>>>>> Arturo
>>>>>
>>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>> Arturo,
>>>>>>
>>>>>> In the folder scripts, as root user (su -)
>>>>>> # cp slmodemd /etc/rc.d/init.d/
>>>>>>
>>>>>> # chkconfig slmodemd --add
>>>>>> # chkconfig slmodemd on
>>>>>>
>>>>>> # cd /etc/rc.d/
>>>>>>
>>>>>> type exactly as this appears. When you get to 6 press Enter you
>>>>>> should see a ">" continue with the numbers and type everything there
>>>>>> pressing enter everytime till you get to done and press Enter you
>>>>>> should see what is in the above example or something similar.
>>>>>>
>>>>>> # for i in 0 1 2 3 4 5 6
>>>>>> > do
>>>>>> > ls rc$i.d/*slmodemd*
>>>>>> > done
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Here's slmodemd script
>>>>>>
>>>>>> #!/bin/sh
>>>>>> #
>>>>>> # slmodemd: Starts the SmartLink Modem Daemon
>>>>>> #
>>>>>> # chkconfig: 345 90 10
>>>>>> # description: This is the user space part of the SmartLink Modem
>>>>>> driver
>>>>>> # processname: slmodemd
>>>>>> # config: /etc/sysconfig/slmodem
>>>>>>
>>>>>> # Source function library.
>>>>>> . /etc/init.d/functions
>>>>>>
>>>>>> prog=slmodemd
>>>>>> RETVAL=0
>>>>>>
>>>>>> # Default configuration
>>>>>> SLMODEMD_DEVICE=slamr0
>>>>>> SLMODEMD_COUNTRY=USA
>>>>>>
>>>>>> # Source configuration
>>>>>> CONFIG=/etc/sysconfig/$prog
>>>>>> if [ -f $CONFIG ]; then
>>>>>> . $CONFIG
>>>>>> # override default group and permissions if defined in $CONFIG;
>>>>>> # other valid options also can be put into SLMODEMD_OPTS
>>>>>> variable
>>>>>> [ "$GROUP" ] && SLMODEMD_OPTS="$SLMODEMD_OPTS --group=$GROUP"
>>>>>> [ "$PERMS" ] && SLMODEMD_OPTS="$SLMODEMD_OPTS --perm=$PERMS"
>>>>>> fi
>>>>>>
>>>>>> # uncomment this if you want this feature (if necessary edit module
>>>>>> pattern):
>>>>>> # do not try to start on a kernel which does not support it
>>>>>> # grep -q 'slamr\..*o' /lib/modules/`uname -r`/modules.dep || exit 0
>>>>>>
>>>>>> start() {
>>>>>> echo -n "Starting SmartLink Modem driver for $SLMODEMD_DEVICE:
>>>>>> "
>>>>>> $prog </dev/null >/dev/null 2>/dev/null \
>>>>>> --country=$SLMODEMD_COUNTRY $SLMODEMD_OPTS
>>>>>> /dev/$SLMODEMD_DEVICE &
>>>>>> RETVAL=$?
>>>>>> [ $RETVAL -eq 0 ] && success $"$prog startup" || failure
>>>>>> $"$prog startup"
>>>>>> echo
>>>>>> [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
>>>>>> return $RETVAL
>>>>>> }
>>>>>>
>>>>>> stop() {
>>>>>> echo -n "Shutting down SmartLink Modem driver: "
>>>>>> killproc $prog
>>>>>> RETVAL=$?
>>>>>> [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
>>>>>> return $RETVAL
>>>>>> }
>>>>>>
>>>>>> # See how we were called.
>>>>>> case "$1" in
>>>>>> start)
>>>>>> start
>>>>>> ;;
>>>>>> stop)
>>>>>> stop
>>>>>> ;;
>>>>>> status)
>>>>>> status $prog
>>>>>> RETVAL=$?
>>>>>> ;;
>>>>>> restart|reload)
>>>>>> stop
>>>>>> start
>>>>>> RETVAL=$?
>>>>>> ;;
>>>>>> condrestart)
>>>>>> if [ -f /var/lock/subsys/$prog ]; then
>>>>>> stop
>>>>>> start
>>>>>> RETVAL=$?
>>>>>> fi
>>>>>> ;;
>>>>>> *)
>>>>>> echo "*** Usage: $prog {start|stop|status|restart|condrestart}"
>>>>>> exit 1
>>>>>> esac
>>>>>>
>>>>>> exit $RETVAL
>>>>>>
>>>>>>
>>>>>> Add after start procedure here:
>>>>>>
>>>>>> Change COUNTRY from USA to ITALY here:
>>>>>>
>>>>>> SLMODEMD_COUNTRY=USA
>>>>>>
>>>>>> add code below after start and before " echo -n "Starting
>>>>>> SmartLink Modem driver for $SLMODEMD_DEVICE: ""
>>>>>>
>>>>>> start() {
>>>>>>
>>>>>>
>>>>>> if ! [[ -e $SLMODEMD_DEVICE ]] &> /dev/null; then
>>>>>> {
>>>>>> echo -n "Creating devices ..."
>>>>>> mkdir -p /dev
>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1 ;
>>>>>> mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c 242 3 ;
>>>>>> echo -n
>>>>>> mknod -m 600 /dev/slusb0 c 243 0 ; mknod -m 600 /dev/slusb1 c 243 1 ;
>>>>>> mknod -m 600 /dev/slusb2 c 243 2 ; mknod -m 600 /dev/slusb3 c 243 3 ;
>>>>>> echo -n ||
>>>>>> {
>>>>>> echo "failed."
>>>>>> exit -1
>>>>>> }
>>>>>> }
>>>>>> fi
>>>>>>
>>>>>> cat /proc/modules | grep 'ungrab_winmodem' >/dev/null ||
>>>>>> {
>>>>>> echo -n "Ungrabbing winmodem from kernel ... "
>>>>>> modprobe ungrab-winmodem && echo "done." ||
>>>>>> {
>>>>>> echo "failed."
>>>>>> exit -1
>>>>>> }
>>>>>> }
>>>>>> cat /proc/modules | grep 'slamr' >/dev/null ||
>>>>>> {
>>>>>> echo -n "Loading SmartLink Modem driver into kernel ... "
>>>>>> modprobe slamr && echo "done." ||
>>>>>> {
>>>>>> echo "failed."
>>>>>> exit -1
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> Have you tried to connect yet?
>>>>>> Let us know if it works or not.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Antonio
>>>>>>
>>>>>>
>>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>> Hi Antonio, GOAL!!!!!!!!!!!!!!
>>>>>>> Excuse me if I continue with un other question.
>>>>>>> Now that the modules are installable can you explain me how can I
>>>>>>> automatically install these two modules and run slmodemd. Like I
>>>>>>> wrote
>>>>>>> in previous msg, into /Modem/DOCS/Scripts/ there are slmodemd scripts
>>>>>>> but I don't know if one is useful and where put it
>>>>>>> Thanks Arturo
>>>>>>>
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>> make -C modem clean && make -C drivers clean && echo "done."
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o
>>>>>>> modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o
>>>>>>> modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>> dp_sinus.o dp_dummy.o sysdep_common.o
>>>>>>> rm -f *~ *.orig *.rej
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> rm -f kernel-ver slamr.o slamr.ko *st7554.o amrmo_init.o
>>>>>>> sysdep_amr.o
>>>>>>> *.mod.* .*.cmd *~ slusb.*
>>>>>>> rm -f -r .tmp_versions
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> done.
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make
>>>>>>> KERNEL_VER=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/
>>>>>>> make -C modem all
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> rebuild profile...
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>> modem_main.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>> modem_cmdline.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>> modem_datafile.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>> modem_at.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>> modem_timer.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>> modem_pack.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>> modem_ec.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>> modem_comp.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>> modem_param.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>> modem_debug.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>> homolog_data.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>> dp_sinus.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>> dp_dummy.c
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>> sysdep_common.c
>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>> dsplibs.o sysdep_common.o
>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>> modem_test.c
>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> make -C drivers
>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> obj-m=slamr.o
>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>> make[2]: Entering directory
>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>> CC [M]
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrmo_init.o
>>>>>>> CC [M]
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
>>>>>>> LD [M]
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.o
>>>>>>> Building modules, stage 2.
>>>>>>> MODPOST 1 modules
>>>>>>> WARNING: could not find
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>> CC
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.mod.o
>>>>>>> LD [M]
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.ko
>>>>>>> make[2]: Leaving directory
>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>> finished all:
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make
>>>>>>> make -C modem all
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> make -C drivers
>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> doing kernel-ver::
>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>> kernel-ver kernel-ver.c
>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>> make[2]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> obj-m=slamr.o
>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>> make[3]: Entering directory
>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>> Building modules, stage 2.
>>>>>>> MODPOST 1 modules
>>>>>>> WARNING: could not find
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>> make[3]: Leaving directory
>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>> finished all:
>>>>>>> make[2]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make install
>>>>>>> make -C modem all
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>> make -C drivers
>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> doing kernel-ver::
>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>> kernel-ver kernel-ver.c
>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>> make[2]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> obj-m=slamr.o
>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>> make[3]: Entering directory
>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>> Building modules, stage 2.
>>>>>>> MODPOST 1 modules
>>>>>>> WARNING: could not find
>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>> for /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>> make[3]: Leaving directory
>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>> finished all:
>>>>>>> make[2]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> make install -C drivers
>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>> make[1]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> doing kernel-ver::
>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>> kernel-ver kernel-ver.c
>>>>>>> mkdir -p /dev
>>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1
>>>>>>> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
>>>>>>> 242 3 ; echo -n
>>>>>>> make install KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>> make[2]: Entering directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> install -D -m 644 slamr.ko
>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/slamr.ko
>>>>>>> /sbin/depmod -a
>>>>>>> make[2]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
>>>>>>> rm -f -rf /var/lib/slmodem
>>>>>>> install -d -D -m 755 /var/lib/slmodem
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# modprobe ungrab-winmodem
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# modprobe slamr
>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# slmodemd -c ITALY
>>>>>>> /dev/slamr0
>>>>>>> SmartLink Soft Modem: version 2.9.11 Mar 1 2010 14:39:13
>>>>>>> symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
>>>>>>> modem `slamr0' created. TTY is `/dev/pts/2'
>>>>>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>>>>> ^C[root@Fedora12 slmodem-2.9.11-20090222]#
>>>>>>>
>>>>>>>
>>>>>>> 2010/3/1 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>>> Arturo,
>>>>>>>>
>>>>>>>> Installation of ungrab-winmodem appears to be installed correctly,
>>>>>>>> it
>>>>>>>> is the slmodem-2.9.11-20090222/ code that is not
>>>>>>>>
>>>>>>>> Here:
>>>>>>>>
>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>>> after you run
>>>>>>>> make clean
>>>>>>>>
>>>>>>>> run
>>>>>>>>
>>>>>>>> make KERNEL_VER=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/
>>>>>>>> make
>>>>>>>> make install
>>>>>>>>
>>>>>>>> then test it with
>>>>>>>> # modprobe ungrab-winmodem
>>>>>>>> # modprobe slamr
>>>>>>>> then
>>>>>>>> # slmodemd -c ITALY /dev/slamr0
>>>>>>>>
>>>>>>>> if you get the error again, try to login with (su -) and not (su) by
>>>>>>>> itself.
>>>>>>>>
>>>>>>>> There have been little to no success reports, maybe you can report
>>>>>>>> back with a success report?
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Antonio
>>>>>>>>
>>>>>>>> On 3/1/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>>> I send un other time to discuss because in my copy first send are
>>>>>>>>> uncomplete. Sorry.
>>>>>>>>>
>>>>>>>>> Hi Antonio, this is what is happened, and really I understand not
>>>>>>>>> at
>>>>>>>>> all
>>>>>>>>>
>>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]# make
>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/ungrab-winmodem-20090716
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>> CC [M]
>>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.o
>>>>>>>>> Building modules, stage 2.
>>>>>>>>> MODPOST 1 modules
>>>>>>>>> CC
>>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.mod.o
>>>>>>>>> LD [M]
>>>>>>>>> /home/Ciornj/Documents/ungrab-winmodem-20090716/ungrab-winmodem.ko
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>
>>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]# make install
>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/ungrab-winmodem-20090716
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>> Building modules, stage 2.
>>>>>>>>> MODPOST 1 modules
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>> install -D -m 644 ungrab-winmodem.ko
>>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/ungrab-winmodem.ko
>>>>>>>>> /sbin/depmod -a
>>>>>>>>> [root@Fedora12 ungrab-winmodem-20090716]#
>>>>>>>>>
>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make clean
>>>>>>>>> make -C modem clean && make -C drivers clean && echo "done."
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>> rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o
>>>>>>>>> modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o
>>>>>>>>> modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>>>> dp_sinus.o dp_dummy.o sysdep_common.o
>>>>>>>>> rm -f *~ *.orig *.rej
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> rm -f kernel-ver slamr.o slamr.ko *st7554.o amrmo_init.o
>>>>>>>>> sysdep_amr.o
>>>>>>>>> *.mod.* .*.cmd *~ slusb.*
>>>>>>>>> rm -f -r .tmp_versions
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> done.
>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]# make install
>>>>>>>>> make -C modem all
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>> rebuild profile...
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>>> modem_main.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>>> modem_cmdline.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>>> modem_datafile.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>>> modem_at.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>>> modem_timer.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>>> modem_pack.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>>> modem_ec.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>>> modem_comp.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>>> modem_param.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>>> modem_debug.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>>> homolog_data.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>>> dp_sinus.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>>> dp_dummy.c
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>>> sysdep_common.c
>>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o
>>>>>>>>> modem_datafile.o
>>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>>> modem_test.c
>>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/modem'
>>>>>>>>> make -C drivers
>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> doing kernel-ver::
>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>> make[2]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> obj-m=slamr.o
>>>>>>>>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers
>>>>>>>>> make[3]: Entering directory
>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>> CC [M]
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrmo_init.o
>>>>>>>>> CC [M]
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
>>>>>>>>> LD [M]
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.o
>>>>>>>>> Building modules, stage 2.
>>>>>>>>> MODPOST 1 modules
>>>>>>>>> WARNING: could not find
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
>>>>>>>>> for
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/amrlibs.o
>>>>>>>>> CC
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.mod.o
>>>>>>>>> LD [M]
>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers/slamr.ko
>>>>>>>>> make[3]: Leaving directory
>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>> finished all:
>>>>>>>>> make[2]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> make install -C drivers
>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>> make[1]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> doing kernel-ver::
>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>> mkdir -p /dev
>>>>>>>>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242
>>>>>>>>> 1
>>>>>>>>> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
>>>>>>>>> 242 3 ; echo -n
>>>>>>>>> make install KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>> make[2]: Entering directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> install -D -m 644 slamr.ko
>>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/slamr.ko
>>>>>>>>> /sbin/depmod -a
>>>>>>>>> make[2]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> make[1]: Leaving directory
>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20090222/drivers'
>>>>>>>>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
>>>>>>>>> rm -f -rf /var/lib/slmodem
>>>>>>>>> install -d -D -m 755 /var/lib/slmodem
>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20090222]#
>>>>>>>>>
>>>>>>>>> [root@Fedora12 Ciornj]# modprobe ungrab-winmodem.ko
>>>>>>>>> FATAL: Module ungrab_winmodem.ko not found.
>>>>>>>>> [root@Fedora12 Ciornj]# cd
>>>>>>>>> /lib/modules/2.6.31.12-174.2.22.fc12.i686/extra/
>>>>>>>>> [root@Fedora12 extra]# modprobe ./ungrab-winmodem.ko
>>>>>>>>> FATAL: Module ./ungrab_winmodem.ko not found.
>>>>>>>>> [root@Fedora12 extra]# insmod ./ungrab-winmodem.ko
>>>>>>>>> [root@Fedora12 extra]# modprobe ./slamr.ko
>>>>>>>>> FATAL: Module ./slamr.ko not found.
>>>>>>>>> [root@Fedora12 extra]# insmod ./slamr.ko
>>>>>>>>> [root@Fedora12 extra]# lsmod
>>>>>>>>> Module Size Used by
>>>>>>>>> slamr 429352 0
>>>>>>>>> ungrab_winmodem 1888 0
>>>>>>>>>
>>>>>>>>> In Smartlink.txt is wrote:
>>>>>>>>> The modem should setup with:
>>>>>>>>> modprobe ungrab-winmodem
>>>>>>>>> modprobe slamr
>>>>>>>>> slmodemd -c YOUR_COUNTRY /dev/slamr0
>>>>>>>>> which should announce creation of ports:
>>>>>>>>> /dev/ttySL0 --> /dev/pts/N , N some number
>>>>>>>>> Specify the symbolic link /dev/ttySL0 as the port to be used by
>>>>>>>>> dailer software.
>>>>>>>>>
>>>>>>>>> but in my /dev I haven't slamr0 and before modprobe don't mount
>>>>>>>>> modules how you can read above
>>>>>>>>>
>>>>>>>>> And an other question. If with your help I will can run the device
>>>>>>>>> ttySL0 how I can start automatically the daemon /usr/sbin/slmodemd?
>>>>>>>>> Into Modem/DOCS/scripts/ I see scripts for more SO but any for
>>>>>>>>> Fedora.
>>>>>>>>> Perhaps that for Mandrake is good?
>>>>>>>>>
>>>>>>>>> thank you very much for your very appreciate help
>>>>>>>>> Arturo
>>>>>>>>>
>>>>>>>>> 2010/2/28 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>>>>>> Arturo,
>>>>>>>>>>
>>>>>>>>>> Sadly as scanModem explains here, the slamr code does not work
>>>>>>>>>> with
>>>>>>>>>> 2.6.31.X kernels :(
>>>>>>>>>>
>>>>>>>>>> It says 2.8 (it is a typo, means 2.6.31
>>>>>>>>>> For kernels 2.8.31 the slamr driver is not (yet) functional,
>>>>>>>>>> failing
>>>>>>>>>> within at the
>>>>>>>>>> Carrier Check
>>>>>>>>>> function. Thus for service, retain a 2.6.30 or earlier kernel.
>>>>>>>>>>
>>>>>>>>>> For kernels 2.6.31 the slamr driver is not (yet) functional,
>>>>>>>>>> failing
>>>>>>>>>> within at the
>>>>>>>>>> Carrier Check
>>>>>>>>>> function. Thus for service, retain a 2.6.30 or earlier kernel.
>>>>>>>>>>
>>>>>>>>>> Also, the part about ungrab-winmodem-20090716.tar.gz and
>>>>>>>>>> slmodemd-2.9.11-20090222.tar.gz was not updated, that is why it
>>>>>>>>>> says
>>>>>>>>>> as of October 2007, the packages are:
>>>>>>>>>>
>>>>>>>>>> \begin{quote}
>>>>>>>>>> For 2.6.31.12-174.2.22.fc12.i686 compiling drivers is necessary.
>>>>>>>>>> As
>>>>>>>>>> of
>>>>>>>>>> October 2007 the current packages at
>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ are the
>>>>>>>>>> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
>>>>>>>>>> \end{quote}
>>>>>>>>>>
>>>>>>>>>> If you want to give it a try and compile the newer sources for
>>>>>>>>>> both
>>>>>>>>>> slmodemd and slamr and see in case that it might work, go right
>>>>>>>>>> ahead
>>>>>>>>>> and confirm the reports. I have yet to try newer 2.6.32.9 and/or
>>>>>>>>>> 2.6.33 released kernels, will do so as soon as I have a chance and
>>>>>>>>>> see
>>>>>>>>>> if they return functionality to the slamr supported modems.
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>> Antonio
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 2/28/10, Arturo Neri <ciornjeja@xxxxxxxxx> wrote:
>>>>>>>>>>> I trying to install driver for my modem but I receive this error:
>>>>>>>>>>>
>>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]# make
>>>>>>>>>>> make -C modem all
>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>> rebuild profile...
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c
>>>>>>>>>>> modem_main.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
>>>>>>>>>>> modem_cmdline.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
>>>>>>>>>>> modem_datafile.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c
>>>>>>>>>>> modem_at.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
>>>>>>>>>>> modem_timer.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c
>>>>>>>>>>> modem_pack.c
>>>>>>>>>>> modem_pack.c: In function ‘modem_async_get_bits’:
>>>>>>>>>>> modem_pack.c:100: warning: pointer targets in passing argument 2
>>>>>>>>>>> of
>>>>>>>>>>> ‘m->get_chars’ differ in signedness
>>>>>>>>>>> modem_pack.c:100: note: expected ‘char *’ but argument is of type
>>>>>>>>>>> ‘u8
>>>>>>>>>>> *’
>>>>>>>>>>> modem_pack.c: In function ‘modem_async_put_bits’:
>>>>>>>>>>> modem_pack.c:148: warning: pointer targets in passing argument 2
>>>>>>>>>>> of
>>>>>>>>>>> ‘m->put_chars’ differ in signedness
>>>>>>>>>>> modem_pack.c:148: note: expected ‘const char *’ but argument is
>>>>>>>>>>> of
>>>>>>>>>>> type
>>>>>>>>>>> ‘u8
>>>>>>>>>>> *’
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c
>>>>>>>>>>> modem_ec.c
>>>>>>>>>>> modem_ec.c: In function ‘tx_info’:
>>>>>>>>>>> modem_ec.c:723: warning: pointer targets in passing argument 2 of
>>>>>>>>>>> ‘l->modem->get_chars’ differ in signedness
>>>>>>>>>>> modem_ec.c:723: note: expected ‘char *’ but argument is of type
>>>>>>>>>>> ‘u8
>>>>>>>>>>> *’
>>>>>>>>>>> modem_ec.c: In function ‘push_rest_data’:
>>>>>>>>>>> modem_ec.c:811: warning: pointer targets in passing argument 2 of
>>>>>>>>>>> ‘l->modem->put_chars’ differ in signedness
>>>>>>>>>>> modem_ec.c:811: note: expected ‘const char *’ but argument is of
>>>>>>>>>>> type
>>>>>>>>>>> ‘u8
>>>>>>>>>>> *’
>>>>>>>>>>> modem_ec.c: In function ‘rx_info’:
>>>>>>>>>>> modem_ec.c:860: warning: pointer targets in passing argument 2 of
>>>>>>>>>>> ‘l->modem->put_chars’ differ in signedness
>>>>>>>>>>> modem_ec.c:860: note: expected ‘const char *’ but argument is of
>>>>>>>>>>> type
>>>>>>>>>>> ‘u8
>>>>>>>>>>> *’
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c
>>>>>>>>>>> modem_comp.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
>>>>>>>>>>> modem_param.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
>>>>>>>>>>> modem_debug.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
>>>>>>>>>>> homolog_data.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c
>>>>>>>>>>> dp_sinus.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c
>>>>>>>>>>> dp_dummy.c
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
>>>>>>>>>>> sysdep_common.c
>>>>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o
>>>>>>>>>>> modem_datafile.o
>>>>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
>>>>>>>>>>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
>>>>>>>>>>> dsplibs.o sysdep_common.o
>>>>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c
>>>>>>>>>>> modem_test.c
>>>>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o
>>>>>>>>>>> dp_sinus.o
>>>>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o
>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>> make -C drivers
>>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers
>>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>> CC [M]
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:
>>>>>>>>>>> In function ‘amrmo_pci_probe’:
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>> error: ‘SA_SHIRQ’ undeclared (first use in this function)
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>> error: (Each undeclared identifier is reported only once
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>> error: for each function it appears in.)
>>>>>>>>>>> make[4]: ***
>>>>>>>>>>> [/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o]
>>>>>>>>>>> Error 1
>>>>>>>>>>> make[3]: ***
>>>>>>>>>>> [_module_/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers]
>>>>>>>>>>> Error 2
>>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>> make[2]: *** [all] Error 2
>>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> make[1]: *** [all] Error 2
>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> make: *** [drivers] Error 2
>>>>>>>>>>>
>>>>>>>>>>> And with make install
>>>>>>>>>>>
>>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]# make install
>>>>>>>>>>> make -C modem all
>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/modem'
>>>>>>>>>>> make -C drivers
>>>>>>>>>>> KERNEL_DIR=/lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>> make[1]: Entering directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> cc -I/lib/modules/2.6.31.12-174.2.22.fc12.i686/build/include -o
>>>>>>>>>>> kernel-ver kernel-ver.c
>>>>>>>>>>> make all KERNEL_VER=2.6.31.12-174.2.22.fc12.i686
>>>>>>>>>>> make[2]: Entering directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> make modules -C /lib/modules/2.6.31.12-174.2.22.fc12.i686/build
>>>>>>>>>>> SUBDIRS=/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers
>>>>>>>>>>> make[3]: Entering directory
>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>> CC [M]
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:
>>>>>>>>>>> In function ‘amrmo_pci_probe’:
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>> error: ‘SA_SHIRQ’ undeclared (first use in this function)
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>> error: (Each undeclared identifier is reported only once
>>>>>>>>>>> /home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.c:612:
>>>>>>>>>>> error: for each function it appears in.)
>>>>>>>>>>> make[4]: ***
>>>>>>>>>>> [/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers/amrmo_init.o]
>>>>>>>>>>> Error 1
>>>>>>>>>>> make[3]: ***
>>>>>>>>>>> [_module_/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers]
>>>>>>>>>>> Error 2
>>>>>>>>>>> make[3]: Leaving directory
>>>>>>>>>>> `/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686'
>>>>>>>>>>> make[2]: *** [all] Error 2
>>>>>>>>>>> make[2]: Leaving directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> make[1]: *** [all] Error 2
>>>>>>>>>>> make[1]: Leaving directory
>>>>>>>>>>> `/home/Ciornj/Documents/slmodem-2.9.11-20080126/drivers'
>>>>>>>>>>> make: *** [drivers] Error 2
>>>>>>>>>>> [root@Fedora12 slmodem-2.9.11-20080126]#
>>>>>>>>>>>
>>>>>>>>>>> thanks for your help
>>>>>>>>>>> Arturo
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
