Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-17-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.18
Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009
scanModem update of: 2010_02_04
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/
packages with the files necessary to install wvdial, with names like:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
wvdial_karmic_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel slamr
slamrTest=
Attached USB devices are:
ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
01:01.0 Modem: Smart Link Ltd. LM-I56N (rev 10)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 01:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:01.0 2003:8800 1801:2800 Modem: Smart Link Ltd. LM-I56N
Modem interrupt assignment and sharing:
22: 0 0 IO-APIC-fasteoi SL2800
--- Bootup diagnostics for card in PCI slot 01:01.0 ----
[ 0.570511] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.570556] pci 0000:01:01.0: PME# supported from D3hot D3cold
[ 0.570561] pci 0000:01:01.0: PME# disabled
[ 1.865713] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.865720] serial 0000:01:01.0: PCI INT A disabled
[ 14.406103] slamr 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.406118] slamr 0000:01:01.0: setting latency timer to 64
The PCI slot 01:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 105b:0c78 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
16: 38566 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0, eth0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.569768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.569802] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.569806] pci 0000:00:1b.0: PME# disabled
[ 14.664681] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.664782] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:01.0:
Modem chipset detected on
NAME="Modem: Smart Link Ltd. LM-I56N "
CLASS=0703
PCIDEV=2003:8800
SUBSYS=1801:2800
IRQ=22
HDA2=00:1b.0
IDENT=slamr
For candidate modem in: 01:01.0
0703 Modem: Smart Link Ltd. LM-I56N
Primary device ID: 2003:8800
Support type needed or chipset: slamr
Writing DOCs/Intel.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For kernels 2.8.31 the slamr driver is not (yet) functional, failing within at the
Carrier Check
function. Thus for service, retain a 2.8.30 or earlier kernel. For Ubuntu users this
can be done by downloading the kernel from http://packages.ubuntu.com/jaunty/linux-image-2.6.28-16-generic
and from http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ the slamr-2.6.28-16-generic.tar.gz
For 2.6.28-17-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=105b:0c78
IRQ=16
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-17-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 11:25 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2010-02-22 11:59 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2010-02-22 11:59 /dev/ttySL0 -> /dev/pts/0
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 144 0 IO-APIC-edge timer
1: 229 0 IO-APIC-edge i8042
3: 54 0 IO-APIC-edge
4: 2 0 IO-APIC-edge
6: 2 0 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 19889 0 IO-APIC-edge i8042
14: 4073 0 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 38572 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0, eth0
18: 14004 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 27357 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
22: 0 0 IO-APIC-fasteoi SL2800
23: 8922 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
NMI: 0 0 Non-maskable interrupts
LOC: 23759 20290 Local timer interrupts
RES: 2503 2498 Rescheduling interrupts
CAL: 58 103 Function call interrupts
TLB: 583 841 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009 (Ubuntu 2.6.28-17.58-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3f6e0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] modified: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] modified: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
[ 0.000000] modified: 000000003f6f0000 - 000000003f700000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 37816000 - 37fefdc9
[ 0.000000] Allocated new RAMDISK: 0087d000 - 01056dc9
[ 0.000000] Move RAMDISK from 0000000037816000 - 0000000037fefdc8 to 0087d000 - 01056dc8
[ 0.000000] ACPI: RSDP 000F8020, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 3F6E3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3F6E3180, 4578 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F6E0000, 0040
[ 0.000000] ACPI: HPET 3F6E7840, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 3F6E78C0, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 3F6E7740, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 3F6E7940, 015C (r1 PmRef Cpu0Ist 3000 INTL 20041203)
[ 0.000000] ACPI: SSDT 3F6E7DD0, 02F1 (r1 PmRef CpuPm 3000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087d000 - 0001056dc9] NEW RAMDISK ==> [000087d000 - 0001056dc9]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f3bd0] 000f3bd0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f6e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6e0
[ 0.000000] On node 0 totalpages: 259695
[ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1057200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 262 pages used for memmap
[ 0.000000] HighMem zone: 33244 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
[ 0.000000] Kernel command line: root=UUID=a89c84e5-caca-4d7e-823a-eb704cbaf86e ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.081 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5195840 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1008524k/1039232k available (4116k kernel code, 29928k reserved, 2199k data, 532k init, 134024k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc050525d - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc050525d (4116 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.16 BogoMIPS (lpj=6384324)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.019014] ACPI: Core revision 20080926
[ 0.020781] ACPI: Checking initramfs for custom DSDT
[ 0.420436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.462092] CPU0: Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02
[ 0.464001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3192.01 BogoMIPS (lpj=6384020)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.548361] CPU1: Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02
[ 0.548381] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.552048] Brought up 2 CPUs
[ 0.552052] Total of 2 processors activated (6384.17 BogoMIPS).
[ 0.552105] CPU0 attaching sched-domain:
[ 0.552109] domain 0: span 0-1 level MC
[ 0.552112] groups: 0 1
[ 0.552120] CPU1 attaching sched-domain:
[ 0.552122] domain 0: span 0-1 level MC
[ 0.552125] groups: 1 0
[ 0.552209] net_namespace: 776 bytes
[ 0.552209] Booting paravirtualized kernel on bare hardware
[ 0.552396] Time: 17:59:01 Date: 02/22/10
[ 0.552396] regulator: core version 0.5
[ 0.552396] NET: Registered protocol family 16
[ 0.552396] EISA bus registered
[ 0.552396] ACPI: bus type pci registered
[ 0.552396] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
[ 0.552396] PCI: Using MMCONFIG for extended config space
[ 0.552396] PCI: Using configuration type 1 for base access
[ 0.553359] ACPI: EC: Look up EC in DSDT
[ 0.562843] ACPI: Interpreter enabled
[ 0.562848] ACPI: (supports S0 S3 S4 S5)
[ 0.562871] ACPI: Using IOAPIC for interrupt routing
[ 0.569553] ACPI: No dock devices found.
[ 0.569567] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.569665] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
[ 0.569671] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
[ 0.569677] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.569683] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
[ 0.569768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.569802] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.569806] pci 0000:00:1b.0: PME# disabled
[ 0.569854] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
[ 0.569907] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
[ 0.569960] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
[ 0.570014] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
[ 0.570065] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.570108] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.570113] pci 0000:00:1d.7: PME# disabled
[ 0.570236] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.570240] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.570271] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.570279] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.570286] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.570293] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.570301] pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.570344] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907]
[ 0.570351] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803]
[ 0.570358] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707]
[ 0.570365] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603]
[ 0.570372] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f]
[ 0.570379] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.570394] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.570398] pci 0000:00:1f.2: PME# disabled
[ 0.570448] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.570511] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.570556] pci 0000:01:01.0: PME# supported from D3hot D3cold
[ 0.570561] pci 0000:01:01.0: PME# disabled
[ 0.570600] pci 0000:01:03.0: reg 10 io port: [0xee00-0xeeff]
[ 0.570609] pci 0000:01:03.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff]
[ 0.570647] pci 0000:01:03.0: supports D1 D2
[ 0.570650] pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.570655] pci 0000:01:03.0: PME# disabled
[ 0.570703] pci 0000:00:1e.0: transparent bridge
[ 0.570708] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.570713] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.570721] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfc000000-0xfcffffff]
[ 0.570730] bus 00 -> node 0
[ 0.570738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.571022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.583517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.583663] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.583809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.583952] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 0.584105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.584249] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.584394] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.584536] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.584782] ACPI: WMI: Mapper loaded
[ 0.584840] SCSI subsystem initialized
[ 0.584840] libata version 3.00 loaded.
[ 0.584840] usbcore: registered new interface driver usbfs
[ 0.584840] usbcore: registered new interface driver hub
[ 0.584840] usbcore: registered new device driver usb
[ 0.584840] PCI: Using ACPI for IRQ routing
[ 0.592014] Bluetooth: Core ver 2.13
[ 0.592040] NET: Registered protocol family 31
[ 0.592040] Bluetooth: HCI device and connection manager initialized
[ 0.592040] Bluetooth: HCI socket layer initialized
[ 0.592040] NET: Registered protocol family 8
[ 0.592040] NET: Registered protocol family 20
[ 0.592056] NetLabel: Initializing
[ 0.592059] NetLabel: domain hash size = 128
[ 0.592061] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.592081] NetLabel: unlabeled traffic allowed by default
[ 0.592101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.592109] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.596097] AppArmor: AppArmor Filesystem Enabled
[ 0.600017] Switched to high resolution mode on CPU 0
[ 0.600452] Switched to high resolution mode on CPU 1
[ 0.604058] pnp: PnP ACPI init
[ 0.604075] ACPI: bus type pnp registered
[ 0.608685] pnp: PnP ACPI: found 17 devices
[ 0.608687] ACPI: ACPI bus type pnp unregistered
[ 0.608692] PnPBIOS: Disabled by ACPI PNP
[ 0.608704] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.608707] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.608710] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.608713] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.608726] system 00:0d: ioport range 0x400-0x4bf could not be reserved
[ 0.608733] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.608740] system 00:10: iomem range 0xcae00-0xcbfff has been reserved
[ 0.608744] system 00:10: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.608747] system 00:10: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.608750] system 00:10: iomem range 0xfc000-0xfffff could not be reserved
[ 0.608754] system 00:10: iomem range 0x3f6e0000-0x3f6fffff could not be reserved
[ 0.608757] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.608761] system 00:10: iomem range 0x100000-0x3f6dffff could not be reserved
[ 0.608764] system 00:10: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.608768] system 00:10: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.608771] system 00:10: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.608774] system 00:10: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.608778] system 00:10: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.608781] system 00:10: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.608784] system 00:10: iomem range 0xe0000-0xeffff has been reserved
[ 0.643513] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.643517] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.643523] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff
[ 0.643528] pci 0000:00:1e.0: PREFETCH window: 0x000000fc000000-0x000000fcffffff
[ 0.643543] pci 0000:00:1e.0: setting latency timer to 64
[ 0.643547] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.643550] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.643553] bus: 01 index 0 io port: [0xe000-0xefff]
[ 0.643556] bus: 01 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.643559] bus: 01 index 2 mmio: [0xfc000000-0xfcffffff]
[ 0.643561] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.643564] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.643574] NET: Registered protocol family 2
[ 0.656127] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.656450] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.657002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.657382] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.657386] TCP reno registered
[ 0.664201] NET: Registered protocol family 1
[ 0.664375] checking if image is initramfs... it is
[ 1.481447] Freeing initrd memory: 8039k freed
[ 1.481724] cpufreq: No nForce2 chipset.
[ 1.481896] audit: initializing netlink socket (disabled)
[ 1.481927] type=2000 audit(1266861542.480:1): initialized
[ 1.490751] highmem bounce pool size: 64 pages
[ 1.490757] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.492392] VFS: Disk quotas dquot_6.5.1
[ 1.492463] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.493205] fuse init (API version 7.10)
[ 1.493306] msgmni has been set to 1724
[ 1.493526] alg: No test for stdrng (krng)
[ 1.493542] io scheduler noop registered
[ 1.493545] io scheduler anticipatory registered
[ 1.493548] io scheduler deadline registered
[ 1.493565] io scheduler cfq registered (default)
[ 1.493580] pci 0000:00:02.0: Boot video device
[ 1.497606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.497617] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.497779] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.497782] ACPI: Power Button (FF) [PWRF]
[ 1.497834] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.497837] ACPI: Power Button (CM) [PWRB]
[ 1.497902] fan PNP0C0B:00: registered as cooling_device0
[ 1.497908] ACPI: Fan [FAN] (on)
[ 1.498174] processor ACPI_CPU:00: registered as cooling_device1
[ 1.498402] ACPI: SSDT 3F6E7D40, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
[ 1.498662] processor ACPI_CPU:01: registered as cooling_device2
[ 1.501841] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.502156] ACPI: Thermal Zone [THRM] (40 C)
[ 1.502216] isapnp: Scanning for PnP cards...
[ 1.855277] isapnp: No Plug & Play device found
[ 1.864840] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.864938] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.865037] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.865468] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.865713] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.865720] serial 0000:01:01.0: PCI INT A disabled
[ 1.866540] brd: module loaded
[ 1.866914] loop: module loaded
[ 1.866995] Fixed MDIO Bus: probed
[ 1.867002] PPP generic driver version 2.4.2
[ 1.867072] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.867110] Driver 'sd' needs updating - please use bus_type methods
[ 1.867121] Driver 'sr' needs updating - please use bus_type methods
[ 1.867206] ata_piix 0000:00:1f.1: version 2.12
[ 1.867218] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.867255] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.867357] scsi0 : ata_piix
[ 1.867464] scsi1 : ata_piix
[ 1.868204] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.868207] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.032462] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
[ 2.048408] ata1.00: configured for UDMA/66
[ 2.216277] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
[ 2.220608] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.220613] Uniform CD-ROM driver Revision: 3.20
[ 2.220776] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.220845] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.220873] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.220878] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.220920] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.220983] scsi2 : ata_piix
[ 2.221051] scsi3 : ata_piix
[ 2.221785] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 2.221788] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 2.384347] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.384351] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.392371] ata3.00: configured for UDMA/133
[ 2.558870] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.558985] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.559006] sd 2:0:0:0: [sda] Write Protect is off
[ 2.559009] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.559040] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.559115] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.559133] sd 2:0:0:0: [sda] Write Protect is off
[ 2.559136] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.559166] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.559170] sda: sda1 sda2 < sda5 sda6>
[ 2.576694] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.576743] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.577488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.577517] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.577542] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.577547] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.577618] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.581516] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.581533] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 2.596043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.596150] usb usb1: configuration #1 chosen from 1 choice
[ 2.596195] hub 1-0:1.0: USB hub found
[ 2.596205] hub 1-0:1.0: 8 ports detected
[ 2.596346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.596366] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.596400] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.596408] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.596412] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.596465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.596489] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 2.596571] usb usb2: configuration #1 chosen from 1 choice
[ 2.596601] hub 2-0:1.0: USB hub found
[ 2.596609] hub 2-0:1.0: 2 ports detected
[ 2.596705] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.596714] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.596717] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.596770] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.596792] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 2.596873] usb usb3: configuration #1 chosen from 1 choice
[ 2.596902] hub 3-0:1.0: USB hub found
[ 2.596910] hub 3-0:1.0: 2 ports detected
[ 2.597004] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.597011] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.597015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.597068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.597100] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 2.597184] usb usb4: configuration #1 chosen from 1 choice
[ 2.597214] hub 4-0:1.0: USB hub found
[ 2.597223] hub 4-0:1.0: 2 ports detected
[ 2.597319] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.597328] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.597332] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.597383] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.597414] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 2.597495] usb usb5: configuration #1 chosen from 1 choice
[ 2.597525] hub 5-0:1.0: USB hub found
[ 2.597533] hub 5-0:1.0: 2 ports detected
[ 2.597718] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.598020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.598027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.600083] mice: PS/2 mouse device common for all mice
[ 2.600291] rtc_cmos 00:04: RTC can wake from S4
[ 2.600342] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.600368] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.600448] device-mapper: uevent: version 1.0.3
[ 2.600568] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 2.600659] device-mapper: multipath: version 1.0.5 loaded
[ 2.600662] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.600756] EISA: Probing bus 0 at eisa.0
[ 2.600788] EISA: Detected 0 cards.
[ 2.600850] cpuidle: using governor ladder
[ 2.600852] cpuidle: using governor menu
[ 2.601471] TCP cubic registered
[ 2.601589] NET: Registered protocol family 10
[ 2.602115] lo: Disabled Privacy Extensions
[ 2.602517] NET: Registered protocol family 17
[ 2.602554] Bluetooth: L2CAP ver 2.11
[ 2.602556] Bluetooth: L2CAP socket layer initialized
[ 2.602560] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.602562] Bluetooth: SCO socket layer initialized
[ 2.602600] Bluetooth: RFCOMM socket layer initialized
[ 2.602610] Bluetooth: RFCOMM TTY layer initialized
[ 2.602612] Bluetooth: RFCOMM ver 1.10
[ 2.603407] Using IPI No-Shortcut mode
[ 2.603507] registered taskstats version 1
[ 2.603642] Magic number: 14:872:997
[ 2.603719] rtc_cmos 00:04: setting system clock to 2010-02-22 17:59:04 UTC (1266861544)
[ 2.603722] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.603725] EDD information not available.
[ 2.603983] Freeing unused kernel memory: 532k freed
[ 2.604138] Write protecting the kernel text: 4120k
[ 2.604193] Write protecting the kernel read-only data: 1524k
[ 2.622293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.689953] compcache: Compressed swap size set to: 254356 KB
[ 2.690222] TLSF: pool: f7ceb000, init_size=16384, max_size=0, grow_size=16384
[ 2.865539] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.865573] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.868285] 8139too Fast Ethernet driver 0.9.28
[ 2.868328] 8139too 0000:01:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.869888] eth0: RealTek RTL8139 at 0xee00, 00:1c:25:0f:61:80, IRQ 16
[ 2.869891] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.932189] FDC 0 is a post-1991 82077
[ 2.932532] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.066676] usb 1-1: configuration #1 chosen from 1 choice
[ 3.112353] Adding 254352k swap on /dev/ramzswap0. Priority:100 extents:1 across:254352k
[ 3.175079] Initializing USB Mass Storage driver...
[ 3.175232] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3.175326] usb-storage: device found at 2
[ 3.175329] usb-storage: waiting for device to settle before scanning
[ 3.175337] usbcore: registered new interface driver usb-storage
[ 3.175341] USB Mass Storage support registered.
[ 3.476542] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 3.664496] usb 4-2: configuration #1 chosen from 1 choice
[ 3.904056] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 4.101539] usb 5-2: configuration #1 chosen from 1 choice
[ 4.111665] usbcore: registered new interface driver hiddev
[ 4.498547] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 350 FW:823.B1.D USB FW:B1] on usb-0000:00:1d.3-2/input0
[ 4.498576] usbcore: registered new interface driver usbhid
[ 4.498581] usbhid: v2.6:USB HID core driver
[ 8.172282] usb-storage: device scan complete
[ 8.172892] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.173517] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.174142] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.174767] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.176623] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 8.176708] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 8.179742] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 8.179823] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 8.180612] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 8.181384] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 8.183064] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 8.183145] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 8.302122] kjournald starting. Commit interval 5 seconds
[ 8.302144] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.512935] udev: starting version 141
[ 13.829298] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.829348] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.152507] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.230109] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 14.274520] Linux agpgart interface v0.103
[ 14.278232] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 14.278846] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 14.281324] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 14.286795] intel_rng: FWH not detected
[ 14.298790] ppdev: user-space parallel port driver
[ 14.401263] slamr: module license 'Smart Link Ltd.' taints kernel.
[ 14.406032] slamr: SmartLink AMRMO modem.
[ 14.406089] slamr: probe 2003:8800 SL2800 card...
[ 14.406103] slamr 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.406118] slamr 0000:01:01.0: setting latency timer to 64
[ 14.407073] slamr: slamr0 is SL2800 card.
[ 14.439122] iTCO_vendor_support: vendor-support=0
[ 14.440902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 14.441111] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 14.441228] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.569630] usbcore: registered new interface driver snd-usb-audio
[ 14.664681] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.664782] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.697969] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 14.699353] psmouse serio1: ID: 10 00 64<6>ieee1394: raw1394: /dev/raw1394 device initialized
[ 14.901412] lp0: using parport0 (interrupt-driven).
[ 15.220483] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 15.572098] EXT3 FS on sda1, internal journal
[ 16.770829] type=1505 audit(1266861558.664:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2260
[ 16.827190] type=1505 audit(1266861558.720:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2264
[ 16.827341] type=1505 audit(1266861558.720:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2264
[ 16.827392] type=1505 audit(1266861558.720:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2264
[ 16.827437] type=1505 audit(1266861558.720:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2264
[ 16.883480] type=1505 audit(1266861558.776:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2269
[ 17.039710] type=1505 audit(1266861558.932:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2273
[ 17.039942] type=1505 audit(1266861558.932:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2273
[ 17.073990] type=1505 audit(1266861558.968:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2277
[ 17.241470] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.265820] nf_conntrack version 0.5.0 (16238 buckets, 64952 max)
[ 17.266090] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 17.266092] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 17.266095] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 17.328107] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.132879] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 21.132883] vboxdrv: Successfully done.
[ 21.132885] vboxdrv: Found 2 processor cores.
[ 21.132994] vboxdrv: fAsync=0 offMin=0x308 offMax=0x16a8
[ 21.133052] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.133055] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
[ 22.635074] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.635078] Bluetooth: BNEP filters: protocol multicast
[ 22.650886] Bridge firewalling registered
[ 24.245758] [drm] Initialized drm 1.1.0 20060810
[ 24.285587] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.285593] pci 0000:00:02.0: setting latency timer to 64
[ 24.285793] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 24.288456] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 24.288486] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 25.007028] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 28.105084] eth0: link down
[ 28.105367] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 114.301286] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 138.828017] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 138.980913] usb 1-5: configuration #1 chosen from 1 choice
[ 138.983803] scsi5 : SCSI emulation for USB Mass Storage devices
[ 138.985259] usb-storage: device found at 5
[ 138.985263] usb-storage: waiting for device to settle before scanning
[ 139.146983] usb 1-5: USB disconnect, address 5
[ 139.768015] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 139.888014] usb 4-1: device descriptor read/64, error -71
[ 140.112035] usb 4-1: device descriptor read/64, error -71
[ 140.328015] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 140.448023] usb 4-1: device descriptor read/64, error -71
[ 140.672018] usb 4-1: device descriptor read/64, error -71
[ 140.888014] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 141.296016] usb 4-1: device not accepting address 5, error -71
[ 141.408023] usb 4-1: new full speed USB device using uhci_hcd and address 6
[ 141.816011] usb 4-1: device not accepting address 6, error -71
[ 141.816025] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 147.930169] kjournald starting. Commit interval 5 seconds
[ 147.930185] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 147.936216] EXT3 FS on sda6, internal journal
[ 147.936227] EXT3-fs: mounted filesystem with ordered data mode.
[ 161.652018] usb 1-5: new high speed USB device using ehci_hcd and address 7
[ 161.795969] usb 1-5: configuration #1 chosen from 1 choice
[ 161.796646] scsi6 : SCSI emulation for USB Mass Storage devices
[ 161.797386] usb-storage: device found at 7
[ 161.797390] usb-storage: waiting for device to settle before scanning
[ 166.796378] usb-storage: device scan complete
[ 166.826119] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 5.00 PQ: 0 ANSI: 0 CCS
[ 168.657185] sd 6:0:0:0: [sdf] 1956864 512-byte hardware sectors: (1.00 GB/955 MiB)
[ 168.657671] sd 6:0:0:0: [sdf] Write Protect is off
[ 168.657675] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 168.657679] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 168.660304] sd 6:0:0:0: [sdf] 1956864 512-byte hardware sectors: (1.00 GB/955 MiB)
[ 168.661670] sd 6:0:0:0: [sdf] Write Protect is off
[ 168.661675] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 168.661679] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 168.661688] sdf: sdf1
[ 168.701621] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[ 168.701733] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 403.285390] usb 1-5: USB disconnect, address 7
[ 408.624058] usb 4-2: USB disconnect, address 2
[ 419.784044] usb 5-2: USB disconnect, address 2
Module Size Used by
nls_iso8859_1 12032 0
nls_cp437 13696 0
vfat 18816 0
fat 58272 1 vfat
binfmt_misc 16776 1
i915 67844 2
drm 96424 3 i915
bridge 56212 0
stp 10500 1 bridge
bnep 20224 2
vboxnetadp 90216 0
vboxnetflt 96904 0
vboxdrv 132008 1 vboxnetflt
video 25872 0
output 11008 1 video
input_polldev 11912 0
ipt_REJECT 11136 1
ipt_LOG 13700 1
xt_limit 10116 2
xt_tcpudp 11008 7
xt_state 10112 5
ipt_addrtype 10496 4
ip6table_filter 10624 1
ip6_tables 20880 1 ip6table_filter
nf_nat_irc 10240 0
nf_conntrack_irc 13220 1 nf_nat_irc
nf_nat_ftp 10752 0
nf_nat 25876 2 nf_nat_irc,nf_nat_ftp
nf_conntrack_ipv4 21388 7 nf_nat
nf_defrag_ipv4 9984 1 nf_conntrack_ipv4
nf_conntrack_ftp 15652 1 nf_nat_ftp
nf_conntrack 72008 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
iptable_filter 10752 1
ip_tables 19600 1 iptable_filter
x_tables 23044 8 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_state,ipt_addrtype,ip6_tables,ip_tables
lp 17156 0
raw1394 32732 0
ieee1394 94660 1 raw1394
snd_hda_intel 436148 1
snd_usb_audio 90528 0
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 83076 3 snd_hda_intel,snd_usb_audio,snd_pcm_oss
snd_usb_lib 24320 1 snd_usb_audio
snd_hwdep 15108 1 snd_usb_audio
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
iTCO_wdt 19108 0
iTCO_vendor_support 11652 1 iTCO_wdt
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
slamr 437416 2
ungrab_winmodem 10112 0
snd 62756 13 snd_hda_intel,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ppdev 15620 0
intel_agp 34108 1
agpgart 42696 3 drm,intel_agp
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
psmouse 61972 0
pcspkr 10496 0
soundcore 15200 1 snd
serio_raw 13444 0
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
usbhid 42336 0
usb_storage 99648 0
floppy 64324 0
8139too 32128 0
8139cp 27776 0
mii 13312 2 8139too,8139cp
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
compcache 12876 1
lzo_decompress 10880 1 compcache
lzo_compress 10880 1 compcache
tlsf 14092 1 compcache
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
https://signup.live.com/signup.aspx?id=60969
