Re: Jorge, Costa Rica kernel 2.6.28-17-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SB

Your major problem is
[    1.865721] serial 0000:01:01.0: PCI INT A disabled
with respect to getting function of
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 01:01.0	2003:8800	1801:2800	Modem: Smart Link Ltd. LM-I56N

Try removing all the externnal USB devices,
Re boot and run scanModem again.

MarvS

On Tue, Feb 16, 2010 at 3:24 PM, Sweet Boy <zweetboy@xxxxxxxx> wrote:
>
>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
>  as HTML can contain viruses. Use as the email Subject Line:
>            YourName, YourCountry  kernel 2.6.28-17-generic
>  With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
>  YourCountry will enable Country specific guidance. Linux experts in YourCountry
>  can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
>  So in a day, also check the Archived responses at http://www.linmodems.org
> --------------------------  System information ----------------------------
> CPU=i686,  Ubuntu ,  ALSA_version=1.0.18
> Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009
>  scanModem update of:  2010_02_04
>
> The dialer utility package WVDIAL does not appear to be installed on your System.
> For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/
> packages with the files necessary to install wvdial, with names like:
>      wvdial_jaunty_amd64.zip   for x86_64, 64 bit bus systems.
>      wvdial_jaunty_i386.zip    for 32 bit systems.
>      wvdial_karmic_i386.zip    for 32 bit systems.
> These are about 1 MB in size.  After downloaded and copied into your Linux partition:
> $ unzip wv*.zip
> Within the new folder:
> $ sudo dpkg -i *.deb
> will  complete the wvdial installation
> Please read Modem/DOCs/wvdial.txt for usage information.
>
> Presently install your Linux Distributions dkms package. It provides for automated driver updates,
> following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>
>  Potentially useful modem drivers now loaded are:
>        snd_hda_intel
>
> Attached USB devices are:
>  ID 0471:084d Philips
>  ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader
>  ID 04a9:10c2 Canon, Inc.
>  ID 0d8c:0103 C-Media Electronics, Inc. Turtle Beach Audio Advantage Micro
> If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> Candidate PCI devices with modem chips are:
> 01:01.0 Modem: Smart Link Ltd. LM-I56N (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
> High Definition Audio cards can host modem chips.
>
> For candidate card in slot 01:01.0, firmware information and bootup diagnostics are:
>  PCI slot    PCI ID        SubsystemID    Name
>  ----------    ---------    ---------    --------------
>  01:01.0    2003:8800    1801:2800    Modem: Smart Link Ltd. LM-I56N
>
>  Modem interrupt assignment and sharing:
>  --- Bootup diagnostics for card in PCI slot 01:01.0 ----
> [    0.570478] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
> [    0.570523] pci 0000:01:01.0: PME# supported from D3hot D3cold
> [    0.570528] pci 0000:01:01.0: PME# disabled
> [    1.865715] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [    1.865721] serial 0000:01:01.0: PCI INT A disabled
>
>  The PCI slot 01:01.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
>
> For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
>  PCI slot    PCI ID        SubsystemID    Name
>  ----------    ---------    ---------    --------------
>  00:1b.0    8086:27d8    105b:0c78    Audio device: Intel Corporation 82801G
>
>  Modem interrupt assignment and sharing:
>  16:     155598          0   IO-APIC-fasteoi   uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0, eth0
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.569735] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
> [    0.569768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.569773] pci 0000:00:1b.0: PME# disabled
> [   14.508358] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [   14.508415] HDA Intel 0000:00:1b.0: setting latency timer to 64
>
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
>
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.3.3
>              and the compiler used in kernel assembly: 4.3.3
>
>
>
>  Minimal compiling resources appear complete:
>    make utility - /usr/bin/make
>    Compiler version 4.3
>    linuc_headers base folder /lib/modules/2.6.28-17-generic/build
>
>  However some compilations and executable functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
> Checking settings of:    /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>    Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ ; get faxing.tar.gz
> It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble shooting be necessary.
> ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>      /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>      Within /etc/udev/ files:
>
>      Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>      Within any ancient /etc/devfs files:
>
>      Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
> _________________________________________________________________
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> https://signup.live.com/signup.aspx?id=60969


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux