Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, as HTML can contain viruses. Use as the email Subject Line: YourName, YourCountry kernel 2.6.28-17-generic With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Linux experts in YourCountry can be found through: http://www.linux.org/groups/index.html. They will know your Country's modem code, which may be essential for dialup service. Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org -------------------------- System information ---------------------------- CPU=i686, Ubuntu , ALSA_version=1.0.18 Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009 scanModem update of: 2010_02_04 The dialer utility package WVDIAL does not appear to be installed on your System. For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/ packages with the files necessary to install wvdial, with names like: wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems. wvdial_jaunty_i386.zip for 32 bit systems. wvdial_karmic_i386.zip for 32 bit systems. These are about 1 MB in size. After downloaded and copied into your Linux partition: $ unzip wv*.zip Within the new folder: $ sudo dpkg -i *.deb will complete the wvdial installation Please read Modem/DOCs/wvdial.txt for usage information. Presently install your Linux Distributions dkms package. It provides for automated driver updates, following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms There are no blacklisted modem drivers in /etc/modprobe* files Potentially useful modem drivers now loaded are: snd_hda_intel Attached USB devices are: ID 0471:084d Philips ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader ID 04a9:10c2 Canon, Inc. ID 0d8c:0103 C-Media Electronics, Inc. Turtle Beach Audio Advantage Micro If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html If a USB modem or cellphone is attached and was not detected, please provide available information in your request to discuss@xxxxxxxxxxxxx Candidate PCI devices with modem chips are: 01:01.0 Modem: Smart Link Ltd. LM-I56N (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) High Definition Audio cards can host modem chips. For candidate card in slot 01:01.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 01:01.0 2003:8800 1801:2800 Modem: Smart Link Ltd. LM-I56N Modem interrupt assignment and sharing: --- Bootup diagnostics for card in PCI slot 01:01.0 ---- [ 0.570478] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.570523] pci 0000:01:01.0: PME# supported from D3hot D3cold [ 0.570528] pci 0000:01:01.0: PME# disabled [ 1.865715] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.865721] serial 0000:01:01.0: PCI INT A disabled The PCI slot 01:01.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:1b.0 8086:27d8 105b:0c78 Audio device: Intel Corporation 82801G Modem interrupt assignment and sharing: 16: 155598 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0, eth0 --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- [ 0.569735] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.569768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.569773] pci 0000:00:1b.0: PME# disabled [ 14.508358] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.508415] HDA Intel 0000:00:1b.0: setting latency timer to 64 The PCI slot 00:1b.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. === Finished firmware and bootup diagnostics, next deducing cogent software. === Completed candidate modem analyses. The base of the UDEV device file system is: /dev/.udev Versions adequately match for the compiler installed: 4.3.3 and the compiler used in kernel assembly: 4.3.3 Minimal compiling resources appear complete: make utility - /usr/bin/make Compiler version 4.3 linuc_headers base folder /lib/modules/2.6.28-17-generic/build However some compilations and executable functions may need additional files, in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. In not included on your install CD, search for them at http://packages.ubuntu.com or comparable Repository for other Linux distros. When compiling ALSA drivers, the utility "patch" will also be needed. If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev and any of its dependents, under Ubuntu linux-libc-dev If an alternate ethernet connection is available, $ apt-get update $ apt-get -s install linux-kernel-devel will install needed packages. For Debian/Ubuntu related distributions, run the following command to display the needed package list: Otherwise packages have to be found through http://packages.ubuntu.com Once downloaded and transferred into a Linux partition, they can be installed alltogether with: $ sudo dpkg -i *.deb Checking settings of: /etc/ppp/options asyncmap 0 noauth crtscts lock hide-password modem proxyarp lcp-echo-interval 30 lcp-echo-failure 4 noipx In case of a message like: Warning: Could not modify /etc/ppp/pap-secrets: Permission denied see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ ; get faxing.tar.gz It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port. Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 Which can interfere with Browser naviagation. Don't worry about the following, it is for experts should trouble shooting be necessary. ========================================================== Checking for modem support lines: -------------------------------------- /device/modem symbolic link: slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files: Within /etc/modprobe.conf files: /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 Within any ancient /etc/devfs files: Within ancient kernel 2.4.n /etc/module.conf files: --------- end modem support lines -------- _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969
CPU0 CPU1 0: 148 0 IO-APIC-edge timer 1: 1259 0 IO-APIC-edge i8042 3: 19 0 IO-APIC-edge serial 4: 1 0 IO-APIC-edge 6: 2 0 IO-APIC-edge floppy 7: 0 0 IO-APIC-edge parport0 8: 1 0 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 12: 37445 0 IO-APIC-edge i8042 14: 15497 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 155638 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0, eth0 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 19: 34906 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3 23: 55481 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 NMI: 0 0 Non-maskable interrupts LOC: 106477 163587 Local timer interrupts RES: 3699 5266 Rescheduling interrupts CAL: 68 98 Function call interrupts TLB: 726 1399 TLB shootdowns SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 [ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009 (Ubuntu 2.6.28-17.58-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) [ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x3f6e0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f6e0000 (usable) [ 0.000000] modified: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) [ 0.000000] modified: 000000003f6e3000 - 000000003f6f0000 (ACPI data) [ 0.000000] modified: 000000003f6f0000 - 000000003f700000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37816000 - 37fefdc9 [ 0.000000] Allocated new RAMDISK: 0087d000 - 01056dc9 [ 0.000000] Move RAMDISK from 0000000037816000 - 0000000037fefdc8 to 0087d000 - 01056dc8 [ 0.000000] ACPI: RSDP 000F8020, 0014 (r0 IntelR) [ 0.000000] ACPI: RSDT 3F6E3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3F6E3180, 4578 (r1 INTELR AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3F6E0000, 0040 [ 0.000000] ACPI: HPET 3F6E7840, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 3F6E78C0, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3F6E7740, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT 3F6E7940, 015C (r1 PmRef Cpu0Ist 3000 INTL 20041203) [ 0.000000] ACPI: SSDT 3F6E7DD0, 02F1 (r1 PmRef CpuPm 3000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 130MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0001056dc9] NEW RAMDISK ==> [000087d000 - 0001056dc9] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f3bd0] 000f3bd0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003f6e0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f6e0 [ 0.000000] On node 0 totalpages: 259695 [ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1057200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 262 pages used for memmap [ 0.000000] HighMem zone: 33244 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665 [ 0.000000] Kernel command line: root=UUID=a89c84e5-caca-4d7e-823a-eb704cbaf86e ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.097 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 5195840 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1008524k/1039232k available (4116k kernel code, 29928k reserved, 2199k data, 532k init, 134024k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc050525d - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc050525d (4116 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.19 BogoMIPS (lpj=6384388) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.019008] ACPI: Core revision 20080926 [ 0.020773] ACPI: Checking initramfs for custom DSDT [ 0.420439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.462319] CPU0: Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 [ 0.464001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3192.01 BogoMIPS (lpj=6384024) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.548362] CPU1: Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 [ 0.548380] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.552050] Brought up 2 CPUs [ 0.552053] Total of 2 processors activated (6384.20 BogoMIPS). [ 0.552105] CPU0 attaching sched-domain: [ 0.552108] domain 0: span 0-1 level MC [ 0.552112] groups: 0 1 [ 0.552120] CPU1 attaching sched-domain: [ 0.552122] domain 0: span 0-1 level MC [ 0.552125] groups: 1 0 [ 0.552213] net_namespace: 776 bytes [ 0.552213] Booting paravirtualized kernel on bare hardware [ 0.552397] Time: 16:17:33 Date: 02/16/10 [ 0.552397] regulator: core version 0.5 [ 0.552397] NET: Registered protocol family 16 [ 0.552397] EISA bus registered [ 0.552397] ACPI: bus type pci registered [ 0.552397] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. [ 0.552397] PCI: Using MMCONFIG for extended config space [ 0.552397] PCI: Using configuration type 1 for base access [ 0.553354] ACPI: EC: Look up EC in DSDT [ 0.562811] ACPI: Interpreter enabled [ 0.562816] ACPI: (supports S0 S3 S4 S5) [ 0.562840] ACPI: Using IOAPIC for interrupt routing [ 0.569519] ACPI: No dock devices found. [ 0.569533] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.569632] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff] [ 0.569638] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07] [ 0.569644] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.569650] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff] [ 0.569735] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.569768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.569773] pci 0000:00:1b.0: PME# disabled [ 0.569821] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f] [ 0.569874] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f] [ 0.569926] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f] [ 0.569981] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f] [ 0.570031] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.570074] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.570079] pci 0000:00:1d.7: PME# disabled [ 0.570202] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.570207] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.570238] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.570245] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.570253] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.570260] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.570268] pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.570311] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907] [ 0.570318] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803] [ 0.570325] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707] [ 0.570332] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603] [ 0.570339] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f] [ 0.570346] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.570361] pci 0000:00:1f.2: PME# supported from D3hot [ 0.570366] pci 0000:00:1f.2: PME# disabled [ 0.570415] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.570478] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.570523] pci 0000:01:01.0: PME# supported from D3hot D3cold [ 0.570528] pci 0000:01:01.0: PME# disabled [ 0.570567] pci 0000:01:03.0: reg 10 io port: [0xee00-0xeeff] [ 0.570576] pci 0000:01:03.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff] [ 0.570614] pci 0000:01:03.0: supports D1 D2 [ 0.570617] pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.570622] pci 0000:01:03.0: PME# disabled [ 0.570670] pci 0000:00:1e.0: transparent bridge [ 0.570675] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.570680] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.570687] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfc000000-0xfcffffff] [ 0.570696] bus 00 -> node 0 [ 0.570704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.570988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.583494] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.583640] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.583786] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.583932] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15) [ 0.584085] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.584233] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.584379] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.584522] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.584773] ACPI: WMI: Mapper loaded [ 0.584833] SCSI subsystem initialized [ 0.584833] libata version 3.00 loaded. [ 0.584833] usbcore: registered new interface driver usbfs [ 0.584833] usbcore: registered new interface driver hub [ 0.584833] usbcore: registered new device driver usb [ 0.584833] PCI: Using ACPI for IRQ routing [ 0.592014] Bluetooth: Core ver 2.13 [ 0.592041] NET: Registered protocol family 31 [ 0.592041] Bluetooth: HCI device and connection manager initialized [ 0.592041] Bluetooth: HCI socket layer initialized [ 0.592041] NET: Registered protocol family 8 [ 0.592041] NET: Registered protocol family 20 [ 0.592056] NetLabel: Initializing [ 0.592059] NetLabel: domain hash size = 128 [ 0.592061] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.592081] NetLabel: unlabeled traffic allowed by default [ 0.592101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.592109] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.596098] AppArmor: AppArmor Filesystem Enabled [ 0.600018] Switched to high resolution mode on CPU 0 [ 0.600449] Switched to high resolution mode on CPU 1 [ 0.604058] pnp: PnP ACPI init [ 0.604073] ACPI: bus type pnp registered [ 0.608673] pnp: PnP ACPI: found 17 devices [ 0.608675] ACPI: ACPI bus type pnp unregistered [ 0.608680] PnPBIOS: Disabled by ACPI PNP [ 0.608693] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.608696] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.608699] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.608702] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.608715] system 00:0d: ioport range 0x400-0x4bf could not be reserved [ 0.608723] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 0.608730] system 00:10: iomem range 0xcae00-0xcbfff has been reserved [ 0.608733] system 00:10: iomem range 0xf0000-0xf7fff could not be reserved [ 0.608736] system 00:10: iomem range 0xf8000-0xfbfff could not be reserved [ 0.608740] system 00:10: iomem range 0xfc000-0xfffff could not be reserved [ 0.608743] system 00:10: iomem range 0x3f6e0000-0x3f6fffff could not be reserved [ 0.608746] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 0.608750] system 00:10: iomem range 0x100000-0x3f6dffff could not be reserved [ 0.608753] system 00:10: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.608757] system 00:10: iomem range 0xfed13000-0xfed1dfff has been reserved [ 0.608760] system 00:10: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.608764] system 00:10: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.608767] system 00:10: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.608770] system 00:10: iomem range 0xfff00000-0xffffffff has been reserved [ 0.608774] system 00:10: iomem range 0xe0000-0xeffff has been reserved [ 0.643500] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.643504] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.643511] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff [ 0.643516] pci 0000:00:1e.0: PREFETCH window: 0x000000fc000000-0x000000fcffffff [ 0.643531] pci 0000:00:1e.0: setting latency timer to 64 [ 0.643536] bus: 00 index 0 io port: [0x00-0xffff] [ 0.643538] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.643541] bus: 01 index 0 io port: [0xe000-0xefff] [ 0.643544] bus: 01 index 1 mmio: [0xfde00000-0xfdefffff] [ 0.643547] bus: 01 index 2 mmio: [0xfc000000-0xfcffffff] [ 0.643549] bus: 01 index 3 io port: [0x00-0xffff] [ 0.643552] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.643563] NET: Registered protocol family 2 [ 0.656127] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.656449] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.657000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.657381] TCP: Hash tables configured (established 131072 bind 65536) [ 0.657385] TCP reno registered [ 0.664203] NET: Registered protocol family 1 [ 0.664378] checking if image is initramfs... it is [ 1.481462] Freeing initrd memory: 8039k freed [ 1.481736] cpufreq: No nForce2 chipset. [ 1.481910] audit: initializing netlink socket (disabled) [ 1.481940] type=2000 audit(1266337054.480:1): initialized [ 1.490762] highmem bounce pool size: 64 pages [ 1.490768] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.492415] VFS: Disk quotas dquot_6.5.1 [ 1.492485] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.493226] fuse init (API version 7.10) [ 1.493327] msgmni has been set to 1724 [ 1.493548] alg: No test for stdrng (krng) [ 1.493563] io scheduler noop registered [ 1.493566] io scheduler anticipatory registered [ 1.493568] io scheduler deadline registered [ 1.493586] io scheduler cfq registered (default) [ 1.493602] pci 0000:00:02.0: Boot video device [ 1.497637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.497648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.497814] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.497817] ACPI: Power Button (FF) [PWRF] [ 1.497870] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.497873] ACPI: Power Button (CM) [PWRB] [ 1.497939] fan PNP0C0B:00: registered as cooling_device0 [ 1.497945] ACPI: Fan [FAN] (on) [ 1.498213] processor ACPI_CPU:00: registered as cooling_device1 [ 1.498440] ACPI: SSDT 3F6E7D40, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20041203) [ 1.498699] processor ACPI_CPU:01: registered as cooling_device2 [ 1.501871] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.502180] ACPI: Thermal Zone [THRM] (40 C) [ 1.502241] isapnp: Scanning for PnP cards... [ 1.855298] isapnp: No Plug & Play device found [ 1.864842] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.864940] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.865037] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.865469] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.865715] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.865721] serial 0000:01:01.0: PCI INT A disabled [ 1.866542] brd: module loaded [ 1.866917] loop: module loaded [ 1.866999] Fixed MDIO Bus: probed [ 1.867005] PPP generic driver version 2.4.2 [ 1.867075] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.867112] Driver 'sd' needs updating - please use bus_type methods [ 1.867124] Driver 'sr' needs updating - please use bus_type methods [ 1.867209] ata_piix 0000:00:1f.1: version 2.12 [ 1.867221] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.867257] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.867360] scsi0 : ata_piix [ 1.867466] scsi1 : ata_piix [ 1.868222] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.868225] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.032463] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66 [ 2.048408] ata1.00: configured for UDMA/66 [ 2.216275] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5 [ 2.220514] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.220519] Uniform CD-ROM driver Revision: 3.20 [ 2.220681] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.220750] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.220777] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.220782] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.220824] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.220898] scsi2 : ata_piix [ 2.220974] scsi3 : ata_piix [ 2.221707] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 2.221711] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 2.384353] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 [ 2.384357] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.392382] ata3.00: configured for UDMA/133 [ 2.558890] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 [ 2.559003] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.559023] sd 2:0:0:0: [sda] Write Protect is off [ 2.559026] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.559057] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.559131] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.559149] sd 2:0:0:0: [sda] Write Protect is off [ 2.559152] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.559183] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.559187] sda: sda1 sda2 < sda5 sda6 > [ 2.578456] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.578506] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.579254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.579282] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.579309] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.579313] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.579386] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.583305] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.583322] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 2.596043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.596152] usb usb1: configuration #1 chosen from 1 choice [ 2.596198] hub 1-0:1.0: USB hub found [ 2.596208] hub 1-0:1.0: 8 ports detected [ 2.596348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.596369] uhci_hcd: USB Universal Host Controller Interface driver [ 2.596402] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.596411] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.596414] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.596469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.596492] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 [ 2.596576] usb usb2: configuration #1 chosen from 1 choice [ 2.596605] hub 2-0:1.0: USB hub found [ 2.596615] hub 2-0:1.0: 2 ports detected [ 2.596712] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.596720] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.596724] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.596777] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.596801] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 [ 2.596882] usb usb3: configuration #1 chosen from 1 choice [ 2.596912] hub 3-0:1.0: USB hub found [ 2.596920] hub 3-0:1.0: 2 ports detected [ 2.597016] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.597022] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.597026] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.597079] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.597110] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 [ 2.597196] usb usb4: configuration #1 chosen from 1 choice [ 2.597226] hub 4-0:1.0: USB hub found [ 2.597233] hub 4-0:1.0: 2 ports detected [ 2.597328] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.597337] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.597341] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.597393] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.597424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 [ 2.597506] usb usb5: configuration #1 chosen from 1 choice [ 2.597536] hub 5-0:1.0: USB hub found [ 2.597544] hub 5-0:1.0: 2 ports detected [ 2.597727] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.598028] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.598035] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.600085] mice: PS/2 mouse device common for all mice [ 2.600292] rtc_cmos 00:04: RTC can wake from S4 [ 2.600342] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.600369] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.600449] device-mapper: uevent: version 1.0.3 [ 2.600567] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx [ 2.600654] device-mapper: multipath: version 1.0.5 loaded [ 2.600657] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.600750] EISA: Probing bus 0 at eisa.0 [ 2.600782] EISA: Detected 0 cards. [ 2.600842] cpuidle: using governor ladder [ 2.600845] cpuidle: using governor menu [ 2.601457] TCP cubic registered [ 2.601573] NET: Registered protocol family 10 [ 2.602092] lo: Disabled Privacy Extensions [ 2.602498] NET: Registered protocol family 17 [ 2.602522] Bluetooth: L2CAP ver 2.11 [ 2.602525] Bluetooth: L2CAP socket layer initialized [ 2.602528] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.602530] Bluetooth: SCO socket layer initialized [ 2.602569] Bluetooth: RFCOMM socket layer initialized [ 2.602578] Bluetooth: RFCOMM TTY layer initialized [ 2.602580] Bluetooth: RFCOMM ver 1.10 [ 2.603380] Using IPI No-Shortcut mode [ 2.603480] registered taskstats version 1 [ 2.603612] Magic number: 14:592:287 [ 2.603640] tty tty20: hash matches [ 2.603657] acpi PNP0400:00: hash matches [ 2.603695] rtc_cmos 00:04: setting system clock to 2010-02-16 16:17:36 UTC (1266337056) [ 2.603699] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.603701] EDD information not available. [ 2.603956] Freeing unused kernel memory: 532k freed [ 2.604112] Write protecting the kernel text: 4120k [ 2.604166] Write protecting the kernel read-only data: 1524k [ 2.622292] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.690294] compcache: Compressed swap size set to: 254356 KB [ 2.690562] TLSF: pool: f7ceb000, init_size=16384, max_size=0, grow_size=16384 [ 2.908702] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.960361] FDC 0 is a post-1991 82077 [ 2.969202] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.969237] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.971853] 8139too Fast Ethernet driver 0.9.28 [ 2.971903] 8139too 0000:01:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.973463] eth0: RealTek RTL8139 at 0xee00, 00:1c:25:0f:61:80, IRQ 16 [ 2.973466] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 3.042580] usb 1-1: configuration #1 chosen from 1 choice [ 3.131560] Adding 254352k swap on /dev/ramzswap0. Priority:100 extents:1 across:254352k [ 3.198106] Initializing USB Mass Storage driver... [ 3.198842] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.199053] usb-storage: device found at 2 [ 3.199056] usb-storage: waiting for device to settle before scanning [ 3.199066] usbcore: registered new interface driver usb-storage [ 3.199071] USB Mass Storage support registered. [ 3.504557] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 3.692879] usb 2-2: configuration #1 chosen from 1 choice [ 3.932036] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 4.106908] usb 3-2: configuration #1 chosen from 1 choice [ 8.196267] usb-storage: device scan complete [ 8.196873] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 8.197499] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 8.198124] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 8.198748] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 8.200594] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 8.200673] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 8.203858] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 8.203936] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 8.204845] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 8.204932] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 8.205859] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 8.206036] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 8.303832] kjournald starting. Commit interval 5 seconds [ 8.303847] EXT3-fs: mounted filesystem with ordered data mode. [ 13.597703] udev: starting version 141 [ 14.245006] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.245057] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 14.260721] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10C2 [ 14.260750] usbcore: registered new interface driver usblp [ 14.283681] Linux agpgart interface v0.103 [ 14.305330] intel_rng: FWH not detected [ 14.306220] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 14.344290] ppdev: user-space parallel port driver [ 14.367259] agpgart-intel 0000:00:00.0: Intel 945G Chipset [ 14.367660] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 14.370243] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 14.439619] iTCO_vendor_support: vendor-support=0 [ 14.439763] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 14.447354] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 14.447538] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 14.447641] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.508358] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.508415] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.542007] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 14.547867] usbcore: registered new interface driver snd-usb-audio [ 14.746999] ieee1394: raw1394: /dev/raw1394 device initialized [ 14.770004] lp0: using parport0 (interrupt-driven). [ 14.902110] psmouse serio1: ID: 10 00 64<6>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 15.448010] EXT3 FS on sda1, internal journal [ 16.656141] type=1505 audit(1266337070.552:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2224 [ 16.712580] type=1505 audit(1266337070.608:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2228 [ 16.712738] type=1505 audit(1266337070.608:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2228 [ 16.712791] type=1505 audit(1266337070.608:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2228 [ 16.712843] type=1505 audit(1266337070.608:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2228 [ 16.768647] type=1505 audit(1266337070.664:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2233 [ 16.940166] type=1505 audit(1266337070.836:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2237 [ 16.940389] type=1505 audit(1266337070.836:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2237 [ 16.974436] type=1505 audit(1266337070.868:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2241 [ 18.890538] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 18.890542] vboxdrv: Successfully done. [ 18.890544] vboxdrv: Found 2 processor cores. [ 18.891748] vboxdrv: fAsync=0 offMin=0x308 offMax=0x1c38 [ 18.891808] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 18.891811] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001). [ 20.957709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.957712] Bluetooth: BNEP filters: protocol multicast [ 21.113366] Bridge firewalling registered [ 23.022549] [drm] Initialized drm 1.1.0 20060810 [ 23.043891] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.043897] pci 0000:00:02.0: setting latency timer to 64 [ 23.050896] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 23.051851] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 23.051879] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 23.769100] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 25.260362] ppdev0: registered pardevice [ 25.308376] ppdev0: unregistered pardevice [ 27.104409] eth0: link down [ 27.104684] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 110.092805] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 180.262012] kjournald starting. Commit interval 5 seconds [ 180.262246] EXT3 FS on sda6, internal journal [ 180.262251] EXT3-fs: recovery complete. [ 180.262415] EXT3-fs: mounted filesystem with ordered data mode. [ 261.956018] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 262.107766] usb 1-5: configuration #1 chosen from 1 choice [ 262.121080] scsi5 : SCSI emulation for USB Mass Storage devices [ 262.121464] usb-storage: device found at 5 [ 262.121467] usb-storage: waiting for device to settle before scanning [ 267.123118] usb-storage: device scan complete [ 267.126717] scsi 5:0:0:0: Direct-Access Philips GoGear SA23xx 1100 PQ: 0 ANSI: 0 CCS [ 267.140098] sd 5:0:0:0: [sdf] 1968896 512-byte hardware sectors: (1.00 GB/961 MiB) [ 267.142538] sd 5:0:0:0: [sdf] Write Protect is off [ 267.142543] sd 5:0:0:0: [sdf] Mode Sense: 43 00 00 00 [ 267.142547] sd 5:0:0:0: [sdf] Assuming drive cache: write through [ 267.160530] sd 5:0:0:0: [sdf] 1968896 512-byte hardware sectors: (1.00 GB/961 MiB) [ 267.161321] sd 5:0:0:0: [sdf] Write Protect is off [ 267.161326] sd 5:0:0:0: [sdf] Mode Sense: 43 00 00 00 [ 267.161331] sd 5:0:0:0: [sdf] Assuming drive cache: write through [ 267.161339] sdf: sdf1 [ 267.165798] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 267.165925] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 630.406577] eth0: link down [ 630.406935] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1602.516557] eth0: link down [ 1602.516921] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1610.083743] eth0: link down [ 1610.084124] ADDRCONF(NETDEV_UP): eth0: link is not ready Module Size Used by nls_iso8859_1 12032 1 nls_cp437 13696 1 vfat 18816 1 fat 58272 1 vfat binfmt_misc 16776 1 i915 67844 2 drm 96424 3 i915 bridge 56212 0 stp 10500 1 bridge bnep 20224 2 vboxnetadp 90216 0 vboxnetflt 96904 0 vboxdrv 132008 1 vboxnetflt video 25872 0 output 11008 1 video input_polldev 11912 0 lp 17156 0 raw1394 32732 0 ieee1394 94660 1 raw1394 snd_usb_audio 90528 1 snd_usb_lib 24320 1 snd_usb_audio snd_hwdep 15108 1 snd_usb_audio snd_hda_intel 436148 1 snd_seq_dummy 10756 0 snd_seq_oss 37760 0 snd_pcm_oss 46336 0 iTCO_wdt 19108 0 snd_seq_midi 14336 0 snd_mixer_oss 22656 1 snd_pcm_oss iTCO_vendor_support 11652 1 iTCO_wdt snd_rawmidi 29696 2 snd_usb_lib,snd_seq_midi snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_pcm 83076 3 snd_usb_audio,snd_hda_intel,snd_pcm_oss snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq intel_agp 34108 1 psmouse 61972 0 ppdev 15620 0 snd_timer 29704 2 snd_seq,snd_pcm snd_page_alloc 16904 2 snd_hda_intel,snd_pcm pcspkr 10496 0 agpgart 42696 3 drm,intel_agp serio_raw 13444 0 usblp 20224 0 parport_pc 40100 1 parport 42220 3 lp,ppdev,parport_pc snd 62756 15 snd_usb_audio,snd_hwdep,snd_hda_intel,snd_seq_oss,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_seq,snd_pcm,snd_seq_device,snd_timer soundcore 15200 1 snd usb_storage 99648 1 8139too 32128 0 8139cp 27776 0 mii 13312 2 8139too,8139cp floppy 64324 0 fbcon 46112 0 tileblit 10752 1 fbcon font 16384 1 fbcon bitblit 13824 1 fbcon softcursor 9984 1 bitblit compcache 12876 1 lzo_decompress 10880 1 compcache lzo_compress 10880 1 compcache tlsf 14092 1 compcache
