Jorge, Under your current kernel slmodemd does work. Download the file http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.28-16-generic.tar.gz and boot earlier kernel(if available) since a package for your -17 kernel does not exist :( Also install wvdial. You can get it from linmodems: The dialer utility package WVDIAL does not appear to be installed on your System. For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/ packages with the files necessary to install wvdial, with names like: wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems. wvdial_jaunty_i386.zip for 32 bit systems. wvdial_karmic_i386.zip for 32 bit systems. These are about 1 MB in size. After downloaded and copied into your Linux partition: $ unzip wv*.zip Within the new folder: $ sudo dpkg -i *.deb will complete the wvdial installation Please read Modem/DOCs/wvdial.txt for usage information. Regards, Antonio On 2/27/10, Sweet Boy <zweetboy@xxxxxxxx> wrote: > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.28-17-generic > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup > service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, Ubuntu , ALSA_version=1.0.18 > Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu > 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009 > scanModem update of: 2010_02_04 > The modem symbolic link is /dev/modem -> ttySL0 > The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0 > The dialer utility package WVDIAL does not appear to be installed on your > System. > For Ubuntu users, there are at the bottom of > http://linmodems.technion.ac.il/packages/ > packages with the files necessary to install wvdial, with names like: > wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems. > wvdial_jaunty_i386.zip for 32 bit systems. > wvdial_karmic_i386.zip for 32 bit systems. > These are about 1 MB in size. After downloaded and copied into your Linux > partition: > $ unzip wv*.zip > Within the new folder: > $ sudo dpkg -i *.deb > will complete the wvdial installation > Please read Modem/DOCs/wvdial.txt for usage information. > > Presently install your Linux Distributions dkms package. It provides for > automated driver updates, > following upgrade of your kernel. For details see > http://linux.dell.com/projects.shtml#dkms > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_hda_intel slamr > > slamrTest= > Attached USB devices are: > ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > Candidate PCI devices with modem chips are: > 01:01.0 Modem: Smart Link Ltd. LM-I56N (rev 10) > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition > Audio Controller (rev 01) > High Definition Audio cards can host modem chips. > > For candidate card in slot 01:01.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:01.0 2003:8800 1801:2800 Modem: Smart Link Ltd. LM-I56N > > Modem interrupt assignment and sharing: > 22: 0 0 IO-APIC-fasteoi SL2800 > --- Bootup diagnostics for card in PCI slot 01:01.0 ---- > [ 0.570511] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] > [ 0.570556] pci 0000:01:01.0: PME# supported from D3hot D3cold > [ 0.570561] pci 0000:01:01.0: PME# disabled > [ 1.865713] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 1.865720] serial 0000:01:01.0: PCI INT A disabled > [ 14.406103] slamr 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 14.406118] slamr 0000:01:01.0: setting latency timer to 64 > > The PCI slot 01:01.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 105b:0c78 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 16: 38566 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, > i915@pci:0000:00:02.0, eth0 > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.569768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] > [ 0.569802] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.569806] pci 0000:00:1b.0: PME# disabled > [ 14.664681] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 14.664782] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing cogent software. > === > > Predictive diagnostics for card in bus 01:01.0: > Modem chipset detected on > NAME="Modem: Smart Link Ltd. LM-I56N " > CLASS=0703 > PCIDEV=2003:8800 > SUBSYS=1801:2800 > IRQ=22 > HDA2=00:1b.0 > IDENT=slamr > > For candidate modem in: 01:01.0 > 0703 Modem: Smart Link Ltd. LM-I56N > Primary device ID: 2003:8800 > Support type needed or chipset: slamr > > > > Writing DOCs/Intel.txt > The modem is supported by the Smartlink > plus the slmodemd helper utility. Read the > DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through > guidance. > > For kernels 2.8.31 the slamr driver is not (yet) functional, failing within > at the > Carrier Check > function. Thus for service, retain a 2.8.30 or earlier kernel. For Ubuntu > users this > can be done by downloading the kernel from > http://packages.ubuntu.com/jaunty/linux-image-2.6.28-16-generic > and from http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ the > slamr-2.6.28-16-generic.tar.gz > > > For 2.6.28-17-generic compiling drivers is necessary. As of October 2007 the > current packages at > http://linmodems.technion.ac.il/packages/smartlink/ are the > ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz > > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset not detected on > NAME="Audio device: Intel Corporation 82801G " > CLASS=0403 > PCIDEV=8086:27d8 > SUBSYS=105b:0c78 > IRQ=16 > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801G > Primary device ID: 8086:27d8 > Support type needed or chipset: > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.3 > and the compiler used in kernel assembly: 4.3.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.28-17-generic/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 277352 2009-02-20 11:25 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from > http://linmodems.technion.ac.il/packages/ get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed to > match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting > be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2010-02-22 > 11:59 /dev/modem -> ttySL0 > slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 > 2010-02-22 11:59 /dev/ttySL0 -> /dev/pts/0 > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > CPU0 CPU1 > 0: 144 0 IO-APIC-edge timer > 1: 229 0 IO-APIC-edge i8042 > 3: 54 0 IO-APIC-edge > 4: 2 0 IO-APIC-edge > 6: 2 0 IO-APIC-edge floppy > 7: 0 0 IO-APIC-edge parport0 > 8: 1 0 IO-APIC-edge rtc0 > 9: 0 0 IO-APIC-fasteoi acpi > 12: 19889 0 IO-APIC-edge i8042 > 14: 4073 0 IO-APIC-edge ata_piix > 15: 0 0 IO-APIC-edge ata_piix > 16: 38572 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, > i915@pci:0000:00:02.0, eth0 > 18: 14004 0 IO-APIC-fasteoi uhci_hcd:usb4 > 19: 27357 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3 > 22: 0 0 IO-APIC-fasteoi SL2800 > 23: 8922 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 > NMI: 0 0 Non-maskable interrupts > LOC: 23759 20290 Local timer interrupts > RES: 2503 2498 Rescheduling interrupts > CAL: 58 103 Function call interrupts > TLB: 583 841 TLB shootdowns > SPU: 0 0 Spurious interrupts > ERR: 0 > MIS: 0 > > [ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.28-17-generic (buildd@rothera) (gcc version > 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009 > (Ubuntu 2.6.28-17.58-generic) > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] NSC Geode by NSC > [ 0.000000] Cyrix CyrixInstead > [ 0.000000] Centaur CentaurHauls > [ 0.000000] Transmeta GenuineTMx86 > [ 0.000000] Transmeta TransmetaCPU > [ 0.000000] UMC UMC UMC UMC > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) > [ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) > [ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > [ 0.000000] DMI 2.5 present. > [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it > around. > [ 0.000000] last_pfn = 0x3f6e0 max_arch_pfn = 0x100000 > [ 0.000000] Scanning 0 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) > [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 000000003f6e0000 (usable) > [ 0.000000] modified: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) > [ 0.000000] modified: 000000003f6e3000 - 000000003f6f0000 (ACPI data) > [ 0.000000] modified: 000000003f6f0000 - 000000003f700000 (reserved) > [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) > [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 > [ 0.000000] RAMDISK: 37816000 - 37fefdc9 > [ 0.000000] Allocated new RAMDISK: 0087d000 - 01056dc9 > [ 0.000000] Move RAMDISK from 0000000037816000 - 0000000037fefdc8 to > 0087d000 - 01056dc8 > [ 0.000000] ACPI: RSDP 000F8020, 0014 (r0 IntelR) > [ 0.000000] ACPI: RSDT 3F6E3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD > 0) > [ 0.000000] ACPI: FACP 3F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD > 0) > [ 0.000000] ACPI: DSDT 3F6E3180, 4578 (r1 INTELR AWRDACPI 1000 MSFT > 100000E) > [ 0.000000] ACPI: FACS 3F6E0000, 0040 > [ 0.000000] ACPI: HPET 3F6E7840, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD > 98) > [ 0.000000] ACPI: MCFG 3F6E78C0, 003C (r1 IntelR AWRDACPI 42302E31 AWRD > 0) > [ 0.000000] ACPI: APIC 3F6E7740, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD > 0) > [ 0.000000] ACPI: SSDT 3F6E7940, 015C (r1 PmRef Cpu0Ist 3000 INTL > 20041203) > [ 0.000000] ACPI: SSDT 3F6E7DD0, 02F1 (r1 PmRef CpuPm 3000 INTL > 20041203) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 130MB HIGHMEM available. > [ 0.000000] 883MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 373fe000 > [ 0.000000] low ram: 00000000 - 373fe000 > [ 0.000000] bootmap 00012000 - 00018e80 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> > [0000100000 - 00008780ac] > [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> > [0000879000 - 000087d000] > [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> > [000009f000 - 0000100000] > [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> > [0000010000 - 0000012000] > [ 0.000000] #7 [000087d000 - 0001056dc9] NEW RAMDISK ==> > [000087d000 - 0001056dc9] > [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> > [0000012000 - 0000019000] > [ 0.000000] found SMP MP-table at [c00f3bd0] 000f3bd0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000373fe > [ 0.000000] HighMem 0x000373fe -> 0x0003f6e0 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0003f6e0 > [ 0.000000] On node 0 totalpages: 259695 > [ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map > c1057200 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1736 pages used for memmap > [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 262 pages used for memmap > [ 0.000000] HighMem zone: 33244 pages, LIFO batch:7 > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000f0000 > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 40000000 (gap: > 3f700000:a0900000) > [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data > [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 257665 > [ 0.000000] Kernel command line: > root=UUID=a89c84e5-caca-4d7e-823a-eb704cbaf86e ro quiet splash > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 1596.081 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.004000] allocated 5195840 bytes of page_cgroup > [ 0.004000] please try cgroup_disable=memory option if you don't want > [ 0.004000] Scanning for low memory corruption every 60 seconds > [ 0.004000] Memory: 1008524k/1039232k available (4116k kernel code, > 29928k reserved, 2199k data, 532k init, 134024k highmem) > [ 0.004000] virtual kernel memory layout: > [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) > [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) > [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) > [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) > [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) > [ 0.004000] .data : 0xc050525d - 0xc072ae60 (2199 kB) > [ 0.004000] .text : 0xc0100000 - 0xc050525d (4116 kB) > [ 0.004000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > CPUs=4, Nodes=1 > [ 0.004000] hpet clockevent registered > [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu > timer > [ 0.004000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3192.16 BogoMIPS (lpj=6384324) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] AppArmor: AppArmor initialized > [ 0.004000] Mount-cache hash table entries: 512 > [ 0.004000] Initializing cgroup subsys ns > [ 0.004000] Initializing cgroup subsys cpuacct > [ 0.004000] Initializing cgroup subsys memory > [ 0.004000] Initializing cgroup subsys freezer > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 1024K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 0 > [ 0.004000] using mwait in idle threads. > [ 0.004000] Checking 'hlt' instruction... OK. > [ 0.019014] ACPI: Core revision 20080926 > [ 0.020781] ACPI: Checking initramfs for custom DSDT > [ 0.420436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.462092] CPU0: Genuine Intel(R) CPU 2140 @ 1.60GHz > stepping 02 > [ 0.464001] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.004000] Initializing CPU#1 > [ 0.004000] Calibrating delay using timer specific routine.. 3192.01 > BogoMIPS (lpj=6384020) > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 1024K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 1 > [ 0.548361] CPU1: Genuine Intel(R) CPU 2140 @ 1.60GHz > stepping 02 > [ 0.548381] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.552048] Brought up 2 CPUs > [ 0.552052] Total of 2 processors activated (6384.17 BogoMIPS). > [ 0.552105] CPU0 attaching sched-domain: > [ 0.552109] domain 0: span 0-1 level MC > [ 0.552112] groups: 0 1 > [ 0.552120] CPU1 attaching sched-domain: > [ 0.552122] domain 0: span 0-1 level MC > [ 0.552125] groups: 1 0 > [ 0.552209] net_namespace: 776 bytes > [ 0.552209] Booting paravirtualized kernel on bare hardware > [ 0.552396] Time: 17:59:01 Date: 02/22/10 > [ 0.552396] regulator: core version 0.5 > [ 0.552396] NET: Registered protocol family 16 > [ 0.552396] EISA bus registered > [ 0.552396] ACPI: bus type pci registered > [ 0.552396] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory > Controller Hub with MMCONFIG support. > [ 0.552396] PCI: Using MMCONFIG for extended config space > [ 0.552396] PCI: Using configuration type 1 for base access > [ 0.553359] ACPI: EC: Look up EC in DSDT > [ 0.562843] ACPI: Interpreter enabled > [ 0.562848] ACPI: (supports S0 S3 S4 S5) > [ 0.562871] ACPI: Using IOAPIC for interrupt routing > [ 0.569553] ACPI: No dock devices found. > [ 0.569567] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.569665] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff] > [ 0.569671] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07] > [ 0.569677] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] > [ 0.569683] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff] > [ 0.569768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] > [ 0.569802] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.569806] pci 0000:00:1b.0: PME# disabled > [ 0.569854] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f] > [ 0.569907] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f] > [ 0.569960] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f] > [ 0.570014] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f] > [ 0.570065] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] > [ 0.570108] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.570113] pci 0000:00:1d.7: PME# disabled > [ 0.570236] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 > ACPI/GPIO/TCO > [ 0.570240] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 > GPIO > [ 0.570271] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] > [ 0.570279] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] > [ 0.570286] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] > [ 0.570293] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] > [ 0.570301] pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f] > [ 0.570344] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907] > [ 0.570351] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803] > [ 0.570358] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707] > [ 0.570365] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603] > [ 0.570372] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f] > [ 0.570379] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] > [ 0.570394] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.570398] pci 0000:00:1f.2: PME# disabled > [ 0.570448] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] > [ 0.570511] pci 0000:01:01.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] > [ 0.570556] pci 0000:01:01.0: PME# supported from D3hot D3cold > [ 0.570561] pci 0000:01:01.0: PME# disabled > [ 0.570600] pci 0000:01:03.0: reg 10 io port: [0xee00-0xeeff] > [ 0.570609] pci 0000:01:03.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff] > [ 0.570647] pci 0000:01:03.0: supports D1 D2 > [ 0.570650] pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold > [ 0.570655] pci 0000:01:03.0: PME# disabled > [ 0.570703] pci 0000:00:1e.0: transparent bridge > [ 0.570708] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] > [ 0.570713] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] > [ 0.570721] pci 0000:00:1e.0: bridge 64bit mmio pref: > [0xfc000000-0xfcffffff] > [ 0.570730] bus 00 -> node 0 > [ 0.570738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.571022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > [ 0.583517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 > 15) > [ 0.583663] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 > 15) *0, disabled. > [ 0.583809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 > 15) > [ 0.583952] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 > *15) > [ 0.584105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 > 15) *0, disabled. > [ 0.584249] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 > 15) *0, disabled. > [ 0.584394] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 > 15) > [ 0.584536] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 > 15) > [ 0.584782] ACPI: WMI: Mapper loaded > [ 0.584840] SCSI subsystem initialized > [ 0.584840] libata version 3.00 loaded. > [ 0.584840] usbcore: registered new interface driver usbfs > [ 0.584840] usbcore: registered new interface driver hub > [ 0.584840] usbcore: registered new device driver usb > [ 0.584840] PCI: Using ACPI for IRQ routing > [ 0.592014] Bluetooth: Core ver 2.13 > [ 0.592040] NET: Registered protocol family 31 > [ 0.592040] Bluetooth: HCI device and connection manager initialized > [ 0.592040] Bluetooth: HCI socket layer initialized > [ 0.592040] NET: Registered protocol family 8 > [ 0.592040] NET: Registered protocol family 20 > [ 0.592056] NetLabel: Initializing > [ 0.592059] NetLabel: domain hash size = 128 > [ 0.592061] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.592081] NetLabel: unlabeled traffic allowed by default > [ 0.592101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.592109] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.596097] AppArmor: AppArmor Filesystem Enabled > [ 0.600017] Switched to high resolution mode on CPU 0 > [ 0.600452] Switched to high resolution mode on CPU 1 > [ 0.604058] pnp: PnP ACPI init > [ 0.604075] ACPI: bus type pnp registered > [ 0.608685] pnp: PnP ACPI: found 17 devices > [ 0.608687] ACPI: ACPI bus type pnp unregistered > [ 0.608692] PnPBIOS: Disabled by ACPI PNP > [ 0.608704] system 00:01: ioport range 0x4d0-0x4d1 has been reserved > [ 0.608707] system 00:01: ioport range 0x800-0x87f has been reserved > [ 0.608710] system 00:01: ioport range 0x290-0x297 has been reserved > [ 0.608713] system 00:01: ioport range 0x880-0x88f has been reserved > [ 0.608726] system 00:0d: ioport range 0x400-0x4bf could not be reserved > [ 0.608733] system 00:0f: iomem range 0xe0000000-0xefffffff has been > reserved > [ 0.608740] system 00:10: iomem range 0xcae00-0xcbfff has been reserved > [ 0.608744] system 00:10: iomem range 0xf0000-0xf7fff could not be > reserved > [ 0.608747] system 00:10: iomem range 0xf8000-0xfbfff could not be > reserved > [ 0.608750] system 00:10: iomem range 0xfc000-0xfffff could not be > reserved > [ 0.608754] system 00:10: iomem range 0x3f6e0000-0x3f6fffff could not be > reserved > [ 0.608757] system 00:10: iomem range 0x0-0x9ffff could not be reserved > [ 0.608761] system 00:10: iomem range 0x100000-0x3f6dffff could not be > reserved > [ 0.608764] system 00:10: iomem range 0xfec00000-0xfec00fff has been > reserved > [ 0.608768] system 00:10: iomem range 0xfed13000-0xfed1dfff has been > reserved > [ 0.608771] system 00:10: iomem range 0xfed20000-0xfed8ffff has been > reserved > [ 0.608774] system 00:10: iomem range 0xfee00000-0xfee00fff has been > reserved > [ 0.608778] system 00:10: iomem range 0xffb00000-0xffb7ffff has been > reserved > [ 0.608781] system 00:10: iomem range 0xfff00000-0xffffffff has been > reserved > [ 0.608784] system 00:10: iomem range 0xe0000-0xeffff has been reserved > [ 0.643513] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 > [ 0.643517] pci 0000:00:1e.0: IO window: 0xe000-0xefff > [ 0.643523] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff > [ 0.643528] pci 0000:00:1e.0: PREFETCH window: > 0x000000fc000000-0x000000fcffffff > [ 0.643543] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.643547] bus: 00 index 0 io port: [0x00-0xffff] > [ 0.643550] bus: 00 index 1 mmio: [0x000000-0xffffffff] > [ 0.643553] bus: 01 index 0 io port: [0xe000-0xefff] > [ 0.643556] bus: 01 index 1 mmio: [0xfde00000-0xfdefffff] > [ 0.643559] bus: 01 index 2 mmio: [0xfc000000-0xfcffffff] > [ 0.643561] bus: 01 index 3 io port: [0x00-0xffff] > [ 0.643564] bus: 01 index 4 mmio: [0x000000-0xffffffff] > [ 0.643574] NET: Registered protocol family 2 > [ 0.656127] IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.656450] TCP established hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.657002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.657382] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.657386] TCP reno registered > [ 0.664201] NET: Registered protocol family 1 > [ 0.664375] checking if image is initramfs... it is > [ 1.481447] Freeing initrd memory: 8039k freed > [ 1.481724] cpufreq: No nForce2 chipset. > [ 1.481896] audit: initializing netlink socket (disabled) > [ 1.481927] type=2000 audit(1266861542.480:1): initialized > [ 1.490751] highmem bounce pool size: 64 pages > [ 1.490757] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 1.492392] VFS: Disk quotas dquot_6.5.1 > [ 1.492463] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 1.493205] fuse init (API version 7.10) > [ 1.493306] msgmni has been set to 1724 > [ 1.493526] alg: No test for stdrng (krng) > [ 1.493542] io scheduler noop registered > [ 1.493545] io scheduler anticipatory registered > [ 1.493548] io scheduler deadline registered > [ 1.493565] io scheduler cfq registered (default) > [ 1.493580] pci 0000:00:02.0: Boot video device > [ 1.497606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 1.497617] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 1.497779] input: Power Button (FF) as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 1.497782] ACPI: Power Button (FF) [PWRF] > [ 1.497834] input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > [ 1.497837] ACPI: Power Button (CM) [PWRB] > [ 1.497902] fan PNP0C0B:00: registered as cooling_device0 > [ 1.497908] ACPI: Fan [FAN] (on) > [ 1.498174] processor ACPI_CPU:00: registered as cooling_device1 > [ 1.498402] ACPI: SSDT 3F6E7D40, 0087 (r1 PmRef Cpu1Ist 3000 INTL > 20041203) > [ 1.498662] processor ACPI_CPU:01: registered as cooling_device2 > [ 1.501841] thermal LNXTHERM:01: registered as thermal_zone0 > [ 1.502156] ACPI: Thermal Zone [THRM] (40 C) > [ 1.502216] isapnp: Scanning for PnP cards... > [ 1.855277] isapnp: No Plug & Play device found > [ 1.864840] Serial: 8250/16550 driver4 ports, IRQ sharing enabled > [ 1.864938] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.865037] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > [ 1.865468] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.865713] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 1.865720] serial 0000:01:01.0: PCI INT A disabled > [ 1.866540] brd: module loaded > [ 1.866914] loop: module loaded > [ 1.866995] Fixed MDIO Bus: probed > [ 1.867002] PPP generic driver version 2.4.2 > [ 1.867072] input: Macintosh mouse button emulation as > /devices/virtual/input/input2 > [ 1.867110] Driver 'sd' needs updating - please use bus_type methods > [ 1.867121] Driver 'sr' needs updating - please use bus_type methods > [ 1.867206] ata_piix 0000:00:1f.1: version 2.12 > [ 1.867218] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 1.867255] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 1.867357] scsi0 : ata_piix > [ 1.867464] scsi1 : ata_piix > [ 1.868204] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq > 14 > [ 1.868207] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq > 15 > [ 2.032462] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66 > [ 2.048408] ata1.00: configured for UDMA/66 > [ 2.216277] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N > 1.03 PQ: 0 ANSI: 5 > [ 2.220608] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 2.220613] Uniform CD-ROM driver Revision: 3.20 > [ 2.220776] sr 0:0:0:0: Attached scsi CD-ROM sr0 > [ 2.220845] sr 0:0:0:0: Attached scsi generic sg0 type 5 > [ 2.220873] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 2.220878] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 2.220920] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 2.220983] scsi2 : ata_piix > [ 2.221051] scsi3 : ata_piix > [ 2.221785] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 > irq 19 > [ 2.221788] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 > irq 19 > [ 2.384347] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 > [ 2.384351] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 2.392371] ata3.00: configured for UDMA/133 > [ 2.558870] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ > JF10 PQ: 0 ANSI: 5 > [ 2.558985] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 > GB/149 GiB) > [ 2.559006] sd 2:0:0:0: [sda] Write Protect is off > [ 2.559009] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.559040] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 2.559115] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 > GB/149 GiB) > [ 2.559133] sd 2:0:0:0: [sda] Write Protect is off > [ 2.559136] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.559166] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 2.559170] sda: sda1 sda2 < sda5 sda6> > [ 2.576694] sd 2:0:0:0: [sda] Attached SCSI disk > [ 2.576743] sd 2:0:0:0: Attached scsi generic sg1 type 0 > [ 2.577488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.577517] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 2.577542] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.577547] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.577618] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus > number 1 > [ 2.581516] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 2.581533] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 > [ 2.596043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 2.596150] usb usb1: configuration #1 chosen from 1 choice > [ 2.596195] hub 1-0:1.0: USB hub found > [ 2.596205] hub 1-0:1.0: 8 ports detected > [ 2.596346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.596366] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.596400] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 2.596408] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 2.596412] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.596465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus > number 2 > [ 2.596489] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 > [ 2.596571] usb usb2: configuration #1 chosen from 1 choice > [ 2.596601] hub 2-0:1.0: USB hub found > [ 2.596609] hub 2-0:1.0: 2 ports detected > [ 2.596705] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 2.596714] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 2.596717] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 2.596770] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus > number 3 > [ 2.596792] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 > [ 2.596873] usb usb3: configuration #1 chosen from 1 choice > [ 2.596902] hub 3-0:1.0: USB hub found > [ 2.596910] hub 3-0:1.0: 2 ports detected > [ 2.597004] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 2.597011] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 2.597015] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 2.597068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 4 > [ 2.597100] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 > [ 2.597184] usb usb4: configuration #1 chosen from 1 choice > [ 2.597214] hub 4-0:1.0: USB hub found > [ 2.597223] hub 4-0:1.0: 2 ports detected > [ 2.597319] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> > IRQ 16 > [ 2.597328] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 2.597332] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 2.597383] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus > number 5 > [ 2.597414] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 > [ 2.597495] usb usb5: configuration #1 chosen from 1 choice > [ 2.597525] hub 5-0:1.0: USB hub found > [ 2.597533] hub 5-0:1.0: 2 ports detected > [ 2.597718] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 > irq 1,12 > [ 2.598020] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 2.598027] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 2.600083] mice: PS/2 mouse device common for all mice > [ 2.600291] rtc_cmos 00:04: RTC can wake from S4 > [ 2.600342] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 2.600368] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs > [ 2.600448] device-mapper: uevent: version 1.0.3 > [ 2.600568] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: > dm-devel@xxxxxxxxxx > [ 2.600659] device-mapper: multipath: version 1.0.5 loaded > [ 2.600662] device-mapper: multipath round-robin: version 1.0.0 loaded > [ 2.600756] EISA: Probing bus 0 at eisa.0 > [ 2.600788] EISA: Detected 0 cards. > [ 2.600850] cpuidle: using governor ladder > [ 2.600852] cpuidle: using governor menu > [ 2.601471] TCP cubic registered > [ 2.601589] NET: Registered protocol family 10 > [ 2.602115] lo: Disabled Privacy Extensions > [ 2.602517] NET: Registered protocol family 17 > [ 2.602554] Bluetooth: L2CAP ver 2.11 > [ 2.602556] Bluetooth: L2CAP socket layer initialized > [ 2.602560] Bluetooth: SCO (Voice Link) ver 0.6 > [ 2.602562] Bluetooth: SCO socket layer initialized > [ 2.602600] Bluetooth: RFCOMM socket layer initialized > [ 2.602610] Bluetooth: RFCOMM TTY layer initialized > [ 2.602612] Bluetooth: RFCOMM ver 1.10 > [ 2.603407] Using IPI No-Shortcut mode > [ 2.603507] registered taskstats version 1 > [ 2.603642] Magic number: 14:872:997 > [ 2.603719] rtc_cmos 00:04: setting system clock to 2010-02-22 17:59:04 > UTC (1266861544) > [ 2.603722] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 2.603725] EDD information not available. > [ 2.603983] Freeing unused kernel memory: 532k freed > [ 2.604138] Write protecting the kernel text: 4120k > [ 2.604193] Write protecting the kernel read-only data: 1524k > [ 2.622293] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input3 > [ 2.689953] compcache: Compressed swap size set to: 254356 KB > [ 2.690222] TLSF: pool: f7ceb000, init_size=16384, max_size=0, > grow_size=16384 > [ 2.865539] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > [ 2.865573] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an > 8139C+ compatible chip, use 8139too > [ 2.868285] 8139too Fast Ethernet driver 0.9.28 > [ 2.868328] 8139too 0000:01:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 2.869888] eth0: RealTek RTL8139 at 0xee00, 00:1c:25:0f:61:80, IRQ 16 > [ 2.869891] eth0: Identified 8139 chip type 'RTL-8100B/8139D' > [ 2.932189] FDC 0 is a post-1991 82077 > [ 2.932532] usb 1-1: new high speed USB device using ehci_hcd and address > 2 > [ 3.066676] usb 1-1: configuration #1 chosen from 1 choice > [ 3.112353] Adding 254352k swap on /dev/ramzswap0. Priority:100 > extents:1 across:254352k > [ 3.175079] Initializing USB Mass Storage driver... > [ 3.175232] scsi4 : SCSI emulation for USB Mass Storage devices > [ 3.175326] usb-storage: device found at 2 > [ 3.175329] usb-storage: waiting for device to settle before scanning > [ 3.175337] usbcore: registered new interface driver usb-storage > [ 3.175341] USB Mass Storage support registered. > [ 3.476542] usb 4-2: new full speed USB device using uhci_hcd and address > 2 > [ 3.664496] usb 4-2: configuration #1 chosen from 1 choice > [ 3.904056] usb 5-2: new low speed USB device using uhci_hcd and address > 2 > [ 4.101539] usb 5-2: configuration #1 chosen from 1 choice > [ 4.111665] usbcore: registered new interface driver hiddev > [ 4.498547] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID > v1.10 Device [APC Back-UPS ES 350 FW:823.B1.D USB FW:B1] on > usb-0000:00:1d.3-2/input0 > [ 4.498576] usbcore: registered new interface driver usbhid > [ 4.498581] usbhid: v2.6:USB HID core driver > [ 8.172282] usb-storage: device scan complete > [ 8.172892] scsi 4:0:0:0: Direct-Access Generic USB SD Reader > 1.00 PQ: 0 ANSI: 0 > [ 8.173517] scsi 4:0:0:1: Direct-Access Generic USB CF Reader > 1.01 PQ: 0 ANSI: 0 > [ 8.174142] scsi 4:0:0:2: Direct-Access Generic USB SM Reader > 1.02 PQ: 0 ANSI: 0 > [ 8.174767] scsi 4:0:0:3: Direct-Access Generic USB MS Reader > 1.03 PQ: 0 ANSI: 0 > [ 8.176623] sd 4:0:0:0: [sdb] Attached SCSI removable disk > [ 8.176708] sd 4:0:0:0: Attached scsi generic sg2 type 0 > [ 8.179742] sd 4:0:0:1: [sdc] Attached SCSI removable disk > [ 8.179823] sd 4:0:0:1: Attached scsi generic sg3 type 0 > [ 8.180612] sd 4:0:0:2: [sdd] Attached SCSI removable disk > [ 8.181384] sd 4:0:0:2: Attached scsi generic sg4 type 0 > [ 8.183064] sd 4:0:0:3: [sde] Attached SCSI removable disk > [ 8.183145] sd 4:0:0:3: Attached scsi generic sg5 type 0 > [ 8.302122] kjournald starting. Commit interval 5 seconds > [ 8.302144] EXT3-fs: mounted filesystem with ordered data mode. > [ 13.512935] udev: starting version 141 > [ 13.829298] parport_pc 00:0a: reported by Plug and Play ACPI > [ 13.829348] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > [ 14.152507] input: PC Speaker as /devices/platform/pcspkr/input/input4 > [ 14.230109] synaptics was reset on resume, see synaptics_resume_reset if > you have trouble on resume > [ 14.274520] Linux agpgart interface v0.103 > [ 14.278232] agpgart-intel 0000:00:00.0: Intel 945G Chipset > [ 14.278846] agpgart-intel 0000:00:00.0: detected 7932K stolen memory > [ 14.281324] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [ 14.286795] intel_rng: FWH not detected > [ 14.298790] ppdev: user-space parallel port driver > [ 14.401263] slamr: module license 'Smart Link Ltd.' taints kernel. > [ 14.406032] slamr: SmartLink AMRMO modem. > [ 14.406089] slamr: probe 2003:8800 SL2800 card... > [ 14.406103] slamr 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 14.406118] slamr 0000:01:01.0: setting latency timer to 64 > [ 14.407073] slamr: slamr0 is SL2800 card. > [ 14.439122] iTCO_vendor_support: vendor-support=0 > [ 14.440902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 > [ 14.441111] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, > TCOBASE=0x0460) > [ 14.441228] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 14.569630] usbcore: registered new interface driver snd-usb-audio > [ 14.664681] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 14.664782] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 14.697969] hda_codec: Unknown model for ALC883, trying auto-probe from > BIOS... > [ 14.699353] psmouse serio1: ID: 10 00 64<6>ieee1394: raw1394: > /dev/raw1394 device initialized > [ 14.901412] lp0: using parport0 (interrupt-driven). > [ 15.220483] input: ImPS/2 Generic Wheel Mouse as > /devices/platform/i8042/serio1/input/input5 > [ 15.572098] EXT3 FS on sda1, internal journal > [ 16.770829] type=1505 audit(1266861558.664:2): operation="profile_load" > name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2260 > [ 16.827190] type=1505 audit(1266861558.720:3): operation="profile_load" > name="/sbin/dhclient-script" name2="default" pid=2264 > [ 16.827341] type=1505 audit(1266861558.720:4): operation="profile_load" > name="/sbin/dhclient3" name2="default" pid=2264 > [ 16.827392] type=1505 audit(1266861558.720:5): operation="profile_load" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" > pid=2264 > [ 16.827437] type=1505 audit(1266861558.720:6): operation="profile_load" > name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2264 > [ 16.883480] type=1505 audit(1266861558.776:7): operation="profile_load" > name="/usr/bin/freshclam" name2="default" pid=2269 > [ 17.039710] type=1505 audit(1266861558.932:8): operation="profile_load" > name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2273 > [ 17.039942] type=1505 audit(1266861558.932:9): operation="profile_load" > name="/usr/sbin/cupsd" name2="default" pid=2273 > [ 17.073990] type=1505 audit(1266861558.968:10): operation="profile_load" > name="/usr/sbin/tcpdump" name2="default" pid=2277 > [ 17.241470] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 17.265820] nf_conntrack version 0.5.0 (16238 buckets, 64952 max) > [ 17.266090] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > Please use > [ 17.266092] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack > module option or > [ 17.266095] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > [ 17.328107] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 21.132879] vboxdrv: Trying to deactivate the NMI watchdog permanently... > [ 21.132883] vboxdrv: Successfully done. > [ 21.132885] vboxdrv: Found 2 processor cores. > [ 21.132994] vboxdrv: fAsync=0 offMin=0x308 offMax=0x16a8 > [ 21.133052] vboxdrv: TSC mode is 'synchronous', kernel timer mode is > 'normal'. > [ 21.133055] vboxdrv: Successfully loaded version 3.0.10 (interface > 0x000e0001). > [ 22.635074] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 22.635078] Bluetooth: BNEP filters: protocol multicast > [ 22.650886] Bridge firewalling registered > [ 24.245758] [drm] Initialized drm 1.1.0 20060810 > [ 24.285587] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 24.285593] pci 0000:00:02.0: setting latency timer to 64 > [ 24.285793] [drm] Initialized i915 1.6.0 20080730 on minor 0 > [ 24.288456] [drm:i915_setparam] *ERROR* unknown parameter 4 > [ 24.288486] [drm:i915_getparam] *ERROR* Unknown parameter 6 > [ 25.007028] [drm:i915_getparam] *ERROR* Unknown parameter 6 > [ 28.105084] eth0: link down > [ 28.105367] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 114.301286] [drm:i915_getparam] *ERROR* Unknown parameter 6 > [ 138.828017] usb 1-5: new high speed USB device using ehci_hcd and address > 5 > [ 138.980913] usb 1-5: configuration #1 chosen from 1 choice > [ 138.983803] scsi5 : SCSI emulation for USB Mass Storage devices > [ 138.985259] usb-storage: device found at 5 > [ 138.985263] usb-storage: waiting for device to settle before scanning > [ 139.146983] usb 1-5: USB disconnect, address 5 > [ 139.768015] usb 4-1: new full speed USB device using uhci_hcd and address > 3 > [ 139.888014] usb 4-1: device descriptor read/64, error -71 > [ 140.112035] usb 4-1: device descriptor read/64, error -71 > [ 140.328015] usb 4-1: new full speed USB device using uhci_hcd and address > 4 > [ 140.448023] usb 4-1: device descriptor read/64, error -71 > [ 140.672018] usb 4-1: device descriptor read/64, error -71 > [ 140.888014] usb 4-1: new full speed USB device using uhci_hcd and address > 5 > [ 141.296016] usb 4-1: device not accepting address 5, error -71 > [ 141.408023] usb 4-1: new full speed USB device using uhci_hcd and address > 6 > [ 141.816011] usb 4-1: device not accepting address 6, error -71 > [ 141.816025] hub 4-0:1.0: unable to enumerate USB device on port 1 > [ 147.930169] kjournald starting. Commit interval 5 seconds > [ 147.930185] EXT3-fs warning: maximal mount count reached, running e2fsck > is recommended > [ 147.936216] EXT3 FS on sda6, internal journal > [ 147.936227] EXT3-fs: mounted filesystem with ordered data mode. > [ 161.652018] usb 1-5: new high speed USB device using ehci_hcd and address > 7 > [ 161.795969] usb 1-5: configuration #1 chosen from 1 choice > [ 161.796646] scsi6 : SCSI emulation for USB Mass Storage devices > [ 161.797386] usb-storage: device found at 7 > [ 161.797390] usb-storage: waiting for device to settle before scanning > [ 166.796378] usb-storage: device scan complete > [ 166.826119] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 > 5.00 PQ: 0 ANSI: 0 CCS > [ 168.657185] sd 6:0:0:0: [sdf] 1956864 512-byte hardware sectors: (1.00 > GB/955 MiB) > [ 168.657671] sd 6:0:0:0: [sdf] Write Protect is off > [ 168.657675] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00 > [ 168.657679] sd 6:0:0:0: [sdf] Assuming drive cache: write through > [ 168.660304] sd 6:0:0:0: [sdf] 1956864 512-byte hardware sectors: (1.00 > GB/955 MiB) > [ 168.661670] sd 6:0:0:0: [sdf] Write Protect is off > [ 168.661675] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00 > [ 168.661679] sd 6:0:0:0: [sdf] Assuming drive cache: write through > [ 168.661688] sdf: sdf1 > [ 168.701621] sd 6:0:0:0: [sdf] Attached SCSI removable disk > [ 168.701733] sd 6:0:0:0: Attached scsi generic sg6 type 0 > [ 403.285390] usb 1-5: USB disconnect, address 7 > [ 408.624058] usb 4-2: USB disconnect, address 2 > [ 419.784044] usb 5-2: USB disconnect, address 2 > > Module Size Used by > nls_iso8859_1 12032 0 > nls_cp437 13696 0 > vfat 18816 0 > fat 58272 1 vfat > binfmt_misc 16776 1 > i915 67844 2 > drm 96424 3 i915 > bridge 56212 0 > stp 10500 1 bridge > bnep 20224 2 > vboxnetadp 90216 0 > vboxnetflt 96904 0 > vboxdrv 132008 1 vboxnetflt > video 25872 0 > output 11008 1 video > input_polldev 11912 0 > ipt_REJECT 11136 1 > ipt_LOG 13700 1 > xt_limit 10116 2 > xt_tcpudp 11008 7 > xt_state 10112 5 > ipt_addrtype 10496 4 > ip6table_filter 10624 1 > ip6_tables 20880 1 ip6table_filter > nf_nat_irc 10240 0 > nf_conntrack_irc 13220 1 nf_nat_irc > nf_nat_ftp 10752 0 > nf_nat 25876 2 nf_nat_irc,nf_nat_ftp > nf_conntrack_ipv4 21388 7 nf_nat > nf_defrag_ipv4 9984 1 nf_conntrack_ipv4 > nf_conntrack_ftp 15652 1 nf_nat_ftp > nf_conntrack 72008 7 > xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp > iptable_filter 10752 1 > ip_tables 19600 1 iptable_filter > x_tables 23044 8 > ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_state,ipt_addrtype,ip6_tables,ip_tables > lp 17156 0 > raw1394 32732 0 > ieee1394 94660 1 raw1394 > snd_hda_intel 436148 1 > snd_usb_audio 90528 0 > snd_pcm_oss 46336 0 > snd_mixer_oss 22656 1 snd_pcm_oss > snd_pcm 83076 3 snd_hda_intel,snd_usb_audio,snd_pcm_oss > snd_usb_lib 24320 1 snd_usb_audio > snd_hwdep 15108 1 snd_usb_audio > snd_seq_dummy 10756 0 > snd_seq_oss 37760 0 > snd_seq_midi 14336 0 > snd_rawmidi 29696 2 snd_usb_lib,snd_seq_midi > snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi > snd_seq 56880 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > iTCO_wdt 19108 0 > iTCO_vendor_support 11652 1 iTCO_wdt > snd_timer 29704 2 snd_pcm,snd_seq > snd_seq_device 14988 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > slamr 437416 2 > ungrab_winmodem 10112 0 > snd 62756 13 > snd_hda_intel,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > ppdev 15620 0 > intel_agp 34108 1 > agpgart 42696 3 drm,intel_agp > snd_page_alloc 16904 2 snd_hda_intel,snd_pcm > psmouse 61972 0 > pcspkr 10496 0 > soundcore 15200 1 snd > serio_raw 13444 0 > parport_pc 40100 1 > parport 42220 3 lp,ppdev,parport_pc > usbhid 42336 0 > usb_storage 99648 0 > floppy 64324 0 > 8139too 32128 0 > 8139cp 27776 0 > mii 13312 2 8139too,8139cp > fbcon 46112 0 > tileblit 10752 1 fbcon > font 16384 1 fbcon > bitblit 13824 1 fbcon > softcursor 9984 1 bitblit > compcache 12876 1 > lzo_decompress 10880 1 compcache > lzo_compress 10880 1 compcache > tlsf 14092 1 compcache > > > > _________________________________________________________________ > Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. > https://signup.live.com/signup.aspx?id=60969
