Marvin/All,
A closer look revealed that I have a mixed success with this
Ubuntu 9.10 kernel. For example, wvdialconf crashes the kernel
reproducibly if the machine has been woken up from hibernate.
I have tested the following two scenarios:
1. reboot, load the modules, hibernate, wake up and run wvdialconf
2. reboot, hibernate, wake up, load the modules, run wvdialconf
The corresponding dmesg.log and dmesg2.log output files are
attached, if anybody is interested.
The quick hack to avoid the above two crashes is attached. This whole
ResumeCallBack business is implemented somewhere inside the *_shipped
blob, maybe it is not 100% compatible with the modern snd_hda_intel
power saving features, I don't know. I just disable it with the
attached patch and the driver seems to work again.
--
Nick Zhuravlev
www.auriga.com
On Thu, Feb 25, 2010 at 11:40:54AM -0500, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> James,
>
> Try Nikolay's solution below, through
> $ sudo gedit /etc/modprobe.d/alsa-base.conf
>
> MarvS
> =====
>
> > List,
> > Can any of you report a success with agrsm-11c1040 driver source
> > package under 2.6.31 series Ubuntu kernels?
>
> Yes, I can confirm a success.
> I have finally upgraded to Ubuntu 9.10 with its official kernel
> and solved the ResumeCallBack problem by disabling
> the power_save option of the snd-hda-intel driver:
>
> [/etc/modprobe.d/alsa-base.conf]
>
> Change line:
> options snd-hda-intel power_save=10 power_save_controller=N
> to:
> options snd-hda-intel power_save=0 power_save_controller=N
>
> Reboot, and see if the driver loads/works.
>
> --
> Nick Zhuravlev
> www.auriga.com
>
> On Thu, Feb 25, 2010 at 9:37 AM, James Silberbauer
> <jamessil@xxxxxxxxxxxx> wrote:
> > Thank you Marvin,
> >
> > agrsm-test has been running for about 13 minutes now without completing.
> >
> > Here's the output:
> >
> > james@james-laptop:~$ sudo modprobe agrserial
> > james@james-laptop:~$ sudo wvdialconf
> > Editing `/etc/wvdial.conf'.
> >
> > Scanning your serial ports for a modem.
> >
> > Modem Port Scan<*1>: S0 S1 S2 S3 Killed
> > james@james-laptop:~$ sudo agrsm-test
> >
> > Found drivers for boot kernel 2.6.31-19-generic at:
> > /lib/modules/2.6.31-19-generic/updates/dkms/agrserial.ko
> > /lib/modules/2.6.31-19-generic/updates/dkms/agrmodem.ko
> >
> >
> >
> > FATAL: Module agrserial is in use.
> > FATAL: Module agrmodem is in use.
> > Loading drivers:
> >
> > Drivers loaded:
> > agrserial 12032 2
> > agrmodem 1250948 1
> > snd_hda_codec 75708 3 agrmodem,snd_hda_codec_analog,snd_hda_intel
> > snd 59204 18
> > agrmodem,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> >
> > and symbolic link created:
> > lrwxrwxrwx 1 root root 12 2010-02-25 16:12 /dev/ttySAGR -> /dev/ttyAGS3
> >
> > Checking for utility wvdialconf
> > Found /usr/bin/wvdialconf, preparing to run:
> > wvdialconf /etc/wvdial.conf
> >
> > Modem Port Scan<*1>: S0 S1 S2 S3
> > ----
> >
> > Thanks
> > James
> >
> > Marvin Stodolsky wrote:
> >>
> >> James,
> >>
> >> After a reboot, you have to load the drivers manually through
> >> $ sudo modprobe agrserial
> >> before running
> >> $ sudo wvdialconf
> >>
> >> Send the List the entire output from
> >> $ sudo agrsm-test
> >> if you need more help
> >>
> >> MarvS
> >>
> >>
> >>
> >> On Thu, Feb 25, 2010 at 12:15 AM, James Silberbauer
> >> <jamessil@xxxxxxxxxxxx> wrote:
> >>
> >>>
> >>> Hello
> >>>
> >>> I have installed agrsm-11c11040_20091225_i386.deb and
> >>> agrsm-tools_0.0.1_all.deb.
> >>>
> >>> Running sudo wvdialconf gives the following:
> >>> -----
> >>> Editing `/etc/wvdial.conf'.
> >>>
> >>> Scanning your serial ports for a modem.
> >>>
> >>> Modem Port Scan<*1>: S0 S1 S2 S3 ttySAGR<Info>: Device or resource
> >>> busy
> >>> Modem Port Scan<*1>: SAGR
> >>>
> >>> Sorry, no modem was detected! Is it in use by another program?
> >>> Did you configure it properly with setserial?
> >>> -----
> >>>
> >>> Here is ModemData.txt:
> >>>
> >>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> >>> Server,
> >>> as HTML can contain viruses. Use as the email Subject Line:
> >>> YourName, YourCountry kernel 2.6.31-19-generic
> >>> With this Subject Line cogent experts will be alerted, and useful case
> >>> names
> >>> left in the Archive.
> >>> YourCountry will enable Country specific guidance. Linux experts in
> >>> YourCountry
> >>> can be found through: http://www.linux.org/groups/index.html.
> >>> They will know your Country's modem code, which may be essential for
> >>> dialup
> >>> service.
> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
> >>> Provider mail filters.
> >>> So in a day, also check the Archived responses at
> >>> http://www.linmodems.org
> >>> -------------------------- System information
> >>> ----------------------------
> >>> CPU=i686, Ubuntu , ALSA_version=1.0.20
> >>> Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1
> >>> (Ubuntu
> >>> 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010
> >>> scanModem update of: 2010_02_16
> >>>
> >>> Distrib_ID=Ubuntu
> >>> DistribCodeName=karmic
> >>> AptRepositoryStem=http://za.archive.ubuntu.com/ubuntu/
> >>>
> >>> The dkms driver upgrade utilities are installed,
> >>>
> >>> There are no blacklisted modem drivers in /etc/modprobe* files
> >>>
> >>> Potentially useful modem drivers now loaded are:
> >>> snd_hda_intel agrmodem agrserial Attached USB devices are:
> >>> ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
> >>> ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
> >>> ID 04a9:1097 Canon, Inc. PIXMA iP5000
> >>> ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> >>> If a cellphone is not detected, see
> >>> http://ubuntuforums.org/archive/index.php/t-878554.html
> >>> A sample report is:
> >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
> >>>
> >>> If a USB modem or cellphone is attached and was not detected, please
> >>> provide available information in your request to discuss@xxxxxxxxxxxxx
> >>>
> >>> Candidate PCI devices with modem chips are:
> >>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> >>> Definition
> >>> Audio Controller (rev 01)
> >>> High Definition Audio cards can host modem chips.
> >>>
> >>> For candidate card in slot 00:1b.0, firmware information and bootup
> >>> diagnostics are:
> >>> PCI slot PCI ID SubsystemID Name
> >>> ---------- --------- --------- --------------
> >>> 00:1b.0 8086:27d8 103c:30a2 Audio device: Intel Corporation
> >>> 82801G
> >>>
> >>> Modem interrupt assignment and sharing:
> >>> 16: 43275 0 IO-APIC-fasteoi i915, HDA Intel, eth0
> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> >>> [ 0.239957] pci 0000:00:1b.0: reg 10 64bit mmio:
> >>> [0xf4580000-0xf4583fff]
> >>> [ 0.240034] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> >>> [ 0.240040] pci 0000:00:1b.0: PME# disabled
> >>> [ 13.752037] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> >>> [ 13.752051] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
> >>> ->
> >>> IRQ 16
> >>> [ 13.752097] HDA Intel 0000:00:1b.0: setting latency timer to 64
> >>> [ 14.123726] input: HDA Digital PCBeep as
> >>> /devices/pci0000:00/0000:00:1b.0/input/input9
> >>>
> >>> The PCI slot 00:1b.0 of the modem card may be disabled early in
> >>> a bootup process, but then enabled later. If modem drivers load
> >>> but the modem is not responsive, read DOCs/Bootup.txt about possible
> >>> fixes.
> >>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> >>> if help is needed.
> >>>
> >>>
> >>>
> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> >>> The ALSA packages provide audio support and also drivers for some modems.
> >>> ALSA diagnostics are written during bootup to /proc/asound/ folders.
> >>>
> >>> The modem cards detected by "aplay -l" are: None
> >>>
> >>>
> >>> The /proc/asound/pcm file reports:
> >>> -----------------------
> >>> 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1
> >>>
> >>> about /proc/asound/cards:
> >>> ------------------------
> >>> 0 [Intel ]: HDA-Intel - HDA Intel
> >>> HDA Intel at 0xf4580000 irq 16
> >>>
> >>> PCI slot 00:1b.0 has a High Definition Audio Card
> >>> The drivers are in the kernel modules tree at:
> >>> /lib/modules/2.6.27-16-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> >>> /lib/modules/2.6.31-17-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> >>> /lib/modules/2.6.31-19-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> >>> /lib/modules/2.6.28-17-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> >>> The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> >>> --------------------------------------------------------
> >>> Codec: LSI ID 1040
> >>> Address: 1
> >>> Function Id: 0x2
> >>> Vendor Id: 0x11c11040
> >>> Subsystem Id: 0x103c1378
> >>> Revision Id: 0x100200
> >>> Modem Function Group: 0x1
> >>>
> >>> The audio card hosts a softmodem chip: 0x11c11040
> >>> If not a Conexant modem, the driver agrsm with its dependent drivers:
> >>>
> >>> ----------
> >>> provide audio + modem support with the modem chip residing on the
> >>> subsystem.
> >>> Any particular card can host any one of several soft modem chips.
> >>>
> >>> === Finished firmware and bootup diagnostics, next deducing cogent
> >>> software.
> >>> ===
> >>>
> >>> Predictive diagnostics for card in bus 00:1b.0:
> >>> Modem chipset detected on
> >>> NAME="Audio device: Intel Corporation 82801G "
> >>> CLASS=0403
> >>> PCIDEV=8086:27d8
> >>> SUBSYS=103c:30a2
> >>> IRQ=16
> >>> HDA2=00:1b.0
> >>> SOFT=8086:27d8.HDA
> >>> HDAchipVendorID=11c1
> >>> CHIP=0x11c11040
> >>> IDENT=agrsm
> >>> Driver=agrsm
> >>>
> >>> For candidate modem in: 00:1b.0
> >>> 0403 Audio device: Intel Corporation 82801G
> >>> Primary device ID: 8086:27d8
> >>> Subsystem PCI_id 103c:30a2
> >>> Softmodem codec or chipset from diagnostics: 0x11c11040
> >>> from Archives:
> >>> The HDA card softmodem chip is 0x11c11040
> >>> Support type needed or chipset: agrsm
> >>>
> >>>
> >>> Writing DOCs/Intel.txt
> >>>
> >>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
> >>> agrserial
> >>> driver pair.
> >>> There are a few different chipsets which use this driver pair, but they
> >>> use
> >>> different code resources:
> >>> Chipsets KV* PackageNames (most current as of November
> >>> 2009)
> >>>
> >>> ----------------------------------------------------------------------------------------------
> >>> 11c1:048c and 11c1:048f 2.6.29
> >>> agrsm048pci-2.1.60_20100108_i386.deb or
> >>> agrsm048pci-2.1.60_20100108.tar.gz
> >>> 11c1:0620 2.6.31
> >>> agrsm06pci-2.1.80_20100106_i386.deb
> >>> or agrsm06pci-2.1.80~20100106.tar.gz !!
> >>> 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb
> >>> or
> >>> agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
> >>> All available at:
> >>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Additionally
> >>> there are;
> >>> automation & testing agrsm-tools_0.0.1_all.deb or
> >>> agrsm-tools-0.0.1-2.noarch.rpm
> >>> General background agrsm_howto.txt
> >>>
> >>> ------------------------------------------------------------------------------------------------
> >>> * KV == latest kernel release with a reported success
> >>> !! Latest update with major credit to Nikolay Zhuravlev
> >>> But see conflict issue:
> >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
> >>> Report from Bjorn Wielens:
> >>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
> >>> an error about the module_version symbol. Using:
> >>> # modprobe --force agrmodem
> >>> # modprobe --force agrserial
> >>> is necessary to load the drivers, and does not appear to cause ill
> >>> effects.
> >>>
> >>>
> >>> All of the above packages are dkms competent. This means that if your
> >>> Linux
> >>> distros dkms package
> >>> is previously installed, if provides for future updates matching
> >>> forthcoming
> >>> kernels.
> >>>
> >>> -------------- end Agere Systems section -------------------
> >>>
> >>> Completed candidate modem analyses.
> >>>
> >>> The base of the UDEV device file system is: /dev/.udev
> >>>
> >>> Versions adequately match for the compiler installed: 4.4.1
> >>> and the compiler used in kernel assembly: 4.4.1
> >>>
> >>>
> >>>
> >>> Minimal compiling resources appear complete:
> >>> make utility - /usr/bin/make
> >>> Compiler version 4.4
> >>> linuc_headers base folder /lib/modules/2.6.31-19-generic/build
> >>>
> >>> However some compilations and executable functions may need additional
> >>> files,
> >>> in the FileNames.h (so called kernel "h"eaders) collection installed in
> >>> /usr/include/ .
> >>> For martian_modem, additional required packages are needed. The also
> >>> required headers of package libc6 are commonly installed by default.
> >>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> >>> packages, for kernels 2.6.24 and later versions.
> >>> In not included on your install CD, search for them at
> >>> http://packages.ubuntu.com
> >>> or comparable Repository for other Linux distros.
> >>> When compiling ALSA drivers, the utility "patch" will also be needed.
> >>>
> >>>
> >>>
> >>>
> >>> If a driver compilation fails, with message including some lack of some
> >>> FileName.h (stdio.h for example), then
> >>> Some additional kernel-header files need installation to /usr/include.
> >>> The
> >>> minimal additional packages are libc6-dev
> >>> and any of its dependents, under Ubuntu linux-libc-dev
> >>>
> >>> If an alternate ethernet connection is available,
> >>> $ apt-get update
> >>> $ apt-get -s install linux-kernel-devel
> >>> will install needed packages.
> >>> For Debian/Ubuntu related distributions, run the following command to
> >>> display the needed package list:
> >>>
> >>> Otherwise packages have to be found through http://packages.ubuntu.com
> >>> Once downloaded and transferred into a Linux partition,
> >>> they can be installed alltogether with:
> >>> $ sudo dpkg -i *.deb
> >>>
> >>>
> >>> Checking pppd properties:
> >>> -rwsr-xr-- 1 root dip 277352 2009-02-20 19:25 /usr/sbin/pppd
> >>>
> >>> In case of an "error 17" "serial loopback" problem, see:
> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
> >>>
> >>> To enable dialout without Root permission do:
> >>> $ su - root (not for Ubuntu)
> >>> sudo chmod a+x /usr/sbin/pppd
> >>> or under Ubuntu related Linuxes
> >>> sudo chmod a+x /usr/sbin/pppd
> >>>
> >>> Checking settings of: /etc/ppp/options
> >>> asyncmap 0
> >>> noauth
> >>> crtscts
> >>> lock
> >>> hide-password
> >>> modem
> >>> proxyarp
> >>> lcp-echo-interval 30
> >>> lcp-echo-failure 4
> >>> noipx
> >>>
> >>> In case of a message like:
> >>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> >>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> >>>
> >>> For guidance on FAX usage, get from
> >>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
> >>> It has samples for a modem using port /dev/ttySL0, which must be changed
> >>> to
> >>> match your modem's port.
> >>>
> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> >>> Which can interfere with Browser naviagation.
> >>>
> >>> Don't worry about the following, it is for experts should trouble
> >>> shooting
> >>> be necessary.
> >>> ==========================================================
> >>>
> >>> Checking for modem support lines:
> >>> --------------------------------------
> >>> /device/modem symbolic link: slmodemd created symbolic link
> >>> /dev/ttySL0:
> >>> Within /etc/udev/ files:
> >>>
> >>> Within /etc/modprobe.conf files:
> >>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
> >>> to
> >>> blacklist unwanted modem drivers
> >>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> >>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> >>> /etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo modprobe
> >>> agrserial"
> >>> /etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe
> >>> --ignore-install
> >>> agrmodem ; /sbin/modprobe --ignore-install agrserial && \
> >>> /etc/modprobe.d/agrsm.conf:remove agrserial /sbin/modprobe -r
> >>> --ignore-remove agrserial ; /sbin/modprobe -r --ignore-remove agrmodem &&
> >>> {
> >>> if test -L /dev/ttySAGR; then rm /dev/ttySAGR; fi } ; true
> >>> /etc/modprobe.d/agrsm.conf:# to automate bootup "sudo modprobe agrmodem"
> >>> /etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo
> >>> modprobe
> >>> agrmodem"
> >>> /etc/modprobe.d/agrsm.conf:# install agrmodem /sbin/modprobe
> >>> --ignore-install agrmodem && \
> >>> /etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial
> >>> loading
> >>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> >>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> >>> Within any ancient /etc/devfs files:
> >>>
> >>> Within ancient kernel 2.4.n /etc/module.conf files:
> >>>
> >>> --------- end modem support lines --------
> >>>
> >>> Any help will be much appreciated.
> >>>
> >>> Thanks
> >>> James
> >>>
> >>>
> >>>
> >>
> >>
> >
> > --
> > The Travel Network
> >
> > The Travel Network - Combined ground handlers & service suppliers forces.
> > www.thetravelnetwork.co.za <http://www.thetravelnetwork.co.za>
> >
> >
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.4 (ndz@toshi) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #5 SMP Tue Dec 22 16:25:54 MSK 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] modified: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 34124000 - 37fef661
[ 0.000000] Allocated new RAMDISK: 008a0000 - 0476b661
[ 0.000000] Move RAMDISK from 0000000034124000 - 0000000037fef660 to 008a0000 - 0476b660
[ 0.000000] ACPI: RSDP 000f8840 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7f7a0100 0008C (v01 TOSASU TOSASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: FACP 7f7a0290 000F4 (v03 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7f7a0680 0C1A0 (v01 TOSASU TOSASU00 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f7ae000 00040
[ 0.000000] ACPI: APIC 7f7a0390 0005C (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f7a0430 0003C (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7f7a0470 00176 (v01 TOSASU TOSASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7f7a03f0 00034 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7f7a05f0 00028 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7f7a0620 00054 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f7ae040 00060 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f7ac820 00038 (v01 TOSASU TOSASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7f7ae0a0 02024 (v01 TOSASU GMCHSCI 09000719 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7f7b02d0 08024 (v01 A_M_I_ OEMATKG 00000000 00000000)
[ 0.000000] ACPI: SSDT 7f7b8300 0060F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f7b8910 002CD (v01 PmRef CpuPm1 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000089b0c0] TEXT DATA BSS ==> [0000100000 - 000089b0c0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000089c000 - 000089f11c] BRK ==> [000089c000 - 000089f11c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008a0000 - 000476b661] NEW RAMDISK ==> [00008a0000 - 000476b661]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522031
[ 0.000000] free_area_init_node: node 0, pgdat c076e960, node_mem_map c476c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c5766000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
[ 0.000000] Kernel command line: root=UUID=1cd5273e-f099-41c4-93ff-083a7ea19870 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10442560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7a0)
[ 0.000000] Memory: 1987744k/2088576k available (4495k kernel code, 99596k reserved, 2125k data, 576k init, 1179272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0778000 - 0xc0808000 ( 576 kB)
[ 0.000000] .data : 0xc0563cd5 - 0xc07773c8 (2125 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0563cd5 (4495 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1728.812 MHz processor.
[ 0.001401] Console: colour VGA+ 80x25
[ 0.001406] console [tty0] enabled
[ 0.001588] hpet clockevent registered
[ 0.001592] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001598] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.62 BogoMIPS (lpj=6915248)
[ 0.001621] Security Framework initialized
[ 0.001645] AppArmor: AppArmor initialized
[ 0.001653] Mount-cache hash table entries: 512
[ 0.001805] Initializing cgroup subsys ns
[ 0.001810] Initializing cgroup subsys cpuacct
[ 0.001815] Initializing cgroup subsys memory
[ 0.001823] Initializing cgroup subsys freezer
[ 0.001825] Initializing cgroup subsys net_cls
[ 0.001843] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001846] CPU: L2 cache: 1024K
[ 0.001852] mce: CPU supports 6 MCE banks
[ 0.001861] CPU0: Thermal monitoring handled by SMI
[ 0.001866] using mwait in idle threads.
[ 0.001874] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001885] ... version: 2
[ 0.001887] ... bit width: 40
[ 0.001890] ... generic counters: 2
[ 0.001892] ... value mask: 000000ffffffffff
[ 0.001894] ... max period: 000000007fffffff
[ 0.001897] ... fixed-purpose counters: 3
[ 0.001899] ... counter mask: 0000000700000003
[ 0.001904] Checking 'hlt' instruction... OK.
[ 0.016889] SMP alternatives: switching to UP code
[ 0.024007] ACPI: Core revision 20090521
[ 0.048386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088623] CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz stepping 01
[ 0.092001] Brought up 1 CPUs
[ 0.092001] Total of 1 processors activated (3457.62 BogoMIPS).
[ 0.092001] CPU0 attaching NULL sched-domain.
[ 0.092001] Booting paravirtualized kernel on bare hardware
[ 0.092001] regulator: core version 0.5
[ 0.092001] Time: 20:53:26 Date: 02/27/10
[ 0.092001] NET: Registered protocol family 16
[ 0.092001] EISA bus registered
[ 0.092001] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.092001] ACPI: bus type pci registered
[ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.092001] PCI: Not using MMCONFIG.
[ 0.092001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.092001] PCI: Using configuration type 1 for base access
[ 0.092001] bio: create slab <bio-0> at 0
[ 0.092001] ACPI: EC: EC description table is found, configuring boot EC
[ 0.099737] ACPI: Interpreter enabled
[ 0.099744] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.099777] ACPI: Using IOAPIC for interrupt routing
[ 0.101294] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104739] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.104742] PCI: Using MMCONFIG for extended config space
[ 0.114880] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.114883] ACPI: EC: driver started in poll mode
[ 0.119212] ACPI Warning: Incorrect checksum in table [ATKG] - 32, should be 4A 20090521 tbutils-246
[ 0.119546] ACPI: No dock devices found.
[ 0.120156] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.120266] pci 0000:00:02.0: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
[ 0.120276] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.120282] pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07]
[ 0.120333] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
[ 0.120437] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]
[ 0.120495] pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.120562] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeaff400-0xfeaff7ff]
[ 0.120623] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.120628] pci 0000:00:1a.7: PME# disabled
[ 0.120676] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff]
[ 0.120728] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120732] pci 0000:00:1b.0: PME# disabled
[ 0.120805] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120809] pci 0000:00:1c.0: PME# disabled
[ 0.120884] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.120888] pci 0000:00:1c.1: PME# disabled
[ 0.120962] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.120967] pci 0000:00:1c.2: PME# disabled
[ 0.121026] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
[ 0.121085] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
[ 0.121144] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
[ 0.121211] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaff000-0xfeaff3ff]
[ 0.121272] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121277] pci 0000:00:1d.7: PME# disabled
[ 0.121420] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.121424] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.121429] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0300 (mask 0003)
[ 0.121435] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[ 0.121482] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.121490] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.121498] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.121506] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.121514] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.121577] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887]
[ 0.121584] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
[ 0.121592] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487]
[ 0.121599] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
[ 0.121606] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe09f]
[ 0.121613] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.121648] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121653] pci 0000:00:1f.2: PME# disabled
[ 0.121819] pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff]
[ 0.121824] pci 0000:00:1c.2: bridge 32bit mmio: [0xfde00000-0xfe5fffff]
[ 0.121832] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xbdf00000-0xbfefffff]
[ 0.121884] pci 0000:05:07.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.121892] pci 0000:05:07.0: reg 14 32bit mmio: [0xfe6ffc00-0xfe6ffcff]
[ 0.121943] pci 0000:05:07.0: supports D1 D2
[ 0.121946] pci 0000:05:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.121951] pci 0000:05:07.0: PME# disabled
[ 0.121993] pci 0000:00:1e.0: transparent bridge
[ 0.121998] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.122003] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.122030] pci_bus 0000:00: on NUMA node 0
[ 0.122037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.122269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.122347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.122493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.143047] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.143223] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
[ 0.143395] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[ 0.143567] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[ 0.143738] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[ 0.143907] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.144085] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.144257] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.144489] SCSI subsystem initialized
[ 0.144545] libata version 3.00 loaded.
[ 0.144623] usbcore: registered new interface driver usbfs
[ 0.144641] usbcore: registered new interface driver hub
[ 0.144666] usbcore: registered new device driver usb
[ 0.144797] ACPI: WMI: Mapper loaded
[ 0.144799] PCI: Using ACPI for IRQ routing
[ 0.144988] Bluetooth: Core ver 2.15
[ 0.145017] NET: Registered protocol family 31
[ 0.145019] Bluetooth: HCI device and connection manager initialized
[ 0.145022] Bluetooth: HCI socket layer initialized
[ 0.145024] NetLabel: Initializing
[ 0.145026] NetLabel: domain hash size = 128
[ 0.145028] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.145041] NetLabel: unlabeled traffic allowed by default
[ 0.145071] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.145076] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.149536] pnp: PnP ACPI init
[ 0.149566] ACPI: bus type pnp registered
[ 0.152766] pnp: PnP ACPI: found 13 devices
[ 0.152769] ACPI: ACPI bus type pnp unregistered
[ 0.152774] PnPBIOS: Disabled by ACPI PNP
[ 0.152787] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.152797] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.152800] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.152804] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.152807] system 00:08: ioport range 0x500-0x53f has been reserved
[ 0.152811] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.152814] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.152818] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.152821] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.152824] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.152831] system 00:0a: ioport range 0x250-0x253 has been reserved
[ 0.152834] system 00:0a: ioport range 0x256-0x25f has been reserved
[ 0.152838] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.152841] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.152847] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.152853] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.152857] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.152860] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.152864] system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.187540] AppArmor: AppArmor Filesystem Enabled
[ 0.187589] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.187591] pci 0000:00:1c.0: IO window: disabled
[ 0.187597] pci 0000:00:1c.0: MEM window: disabled
[ 0.187601] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.187606] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.187608] pci 0000:00:1c.1: IO window: disabled
[ 0.187613] pci 0000:00:1c.1: MEM window: disabled
[ 0.187618] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.187622] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.187626] pci 0000:00:1c.2: IO window: 0xb000-0xbfff
[ 0.187633] pci 0000:00:1c.2: MEM window: 0xfde00000-0xfe5fffff
[ 0.187638] pci 0000:00:1c.2: PREFETCH window: 0x000000bdf00000-0x000000bfefffff
[ 0.187645] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.187649] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.187655] pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
[ 0.187660] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.187675] alloc irq_desc for 16 on node -1
[ 0.187677] alloc kstat_irqs on node -1
[ 0.187684] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.187690] pci 0000:00:1c.0: setting latency timer to 64
[ 0.187698] alloc irq_desc for 17 on node -1
[ 0.187700] alloc kstat_irqs on node -1
[ 0.187704] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.187709] pci 0000:00:1c.1: setting latency timer to 64
[ 0.187716] alloc irq_desc for 18 on node -1
[ 0.187718] alloc kstat_irqs on node -1
[ 0.187722] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.187727] pci 0000:00:1c.2: setting latency timer to 64
[ 0.187735] pci 0000:00:1e.0: setting latency timer to 64
[ 0.187740] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.187742] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.187746] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
[ 0.187749] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfe5fffff]
[ 0.187752] pci_bus 0000:03: resource 2 pref mem [0xbdf00000-0xbfefffff]
[ 0.187755] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 0.187757] pci_bus 0000:05: resource 1 mem: [0xfe600000-0xfe6fffff]
[ 0.187760] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.187763] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.187803] NET: Registered protocol family 2
[ 0.187906] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.188250] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.188803] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.189164] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.189167] TCP reno registered
[ 0.189294] NET: Registered protocol family 1
[ 0.189373] Trying to unpack rootfs image as initramfs...
[ 0.504048] Switched to high resolution mode on CPU 0
[ 2.140570] Freeing initrd memory: 64301k freed
[ 2.183850] Simple Boot Flag at 0x51 set to 0x1
[ 2.183975] cpufreq-nforce2: No nForce2 chipset.
[ 2.184034] Scanning for low memory corruption every 60 seconds
[ 2.184158] audit: initializing netlink socket (disabled)
[ 2.184178] type=2000 audit(1267304008.184:1): initialized
[ 2.195756] highmem bounce pool size: 64 pages
[ 2.195762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.197227] VFS: Disk quotas dquot_6.5.2
[ 2.197288] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.197858] fuse init (API version 7.12)
[ 2.197943] msgmni has been set to 1706
[ 2.198138] alg: No test for stdrng (krng)
[ 2.198150] io scheduler noop registered
[ 2.198153] io scheduler anticipatory registered
[ 2.198155] io scheduler deadline registered
[ 2.198202] io scheduler cfq registered (default)
[ 2.198217] pci 0000:00:02.0: Boot video device
[ 2.342694] alloc irq_desc for 24 on node -1
[ 2.342697] alloc kstat_irqs on node -1
[ 2.342709] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 2.342719] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.342840] alloc irq_desc for 25 on node -1
[ 2.342842] alloc kstat_irqs on node -1
[ 2.342850] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 2.342859] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.342978] alloc irq_desc for 26 on node -1
[ 2.342980] alloc kstat_irqs on node -1
[ 2.342988] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 2.342997] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.343089] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.343481] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 0 ss_did 0
[ 2.343531] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 2.343540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.343744] ACPI: AC Adapter [AC0] (on-line)
[ 2.343804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.343808] ACPI: Power Button [PWRF]
[ 2.343869] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.343872] ACPI: Power Button [PWRB]
[ 2.343914] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.343921] ACPI: Sleep Button [SLPB]
[ 2.343965] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 2.344172] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 2.353372] ACPI: Lid Switch [LID]
[ 2.355002] Monitor-Mwait will be used to enter C-1 state
[ 2.355030] Monitor-Mwait will be used to enter C-2 state
[ 2.355077] Monitor-Mwait will be used to enter C-3 state
[ 2.355086] Marking TSC unstable due to TSC halts in idle
[ 2.355143] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.355186] processor LNXCPU:00: registered as cooling_device0
[ 2.355191] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.362857] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference 20090521 nspredef-946
[ 2.362867] ACPI: Expecting a [Reference] package element, found type C
[ 2.362869] ACPI: Invalid passive threshold
[ 2.364946] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.364955] ACPI: Thermal Zone [THRM] (68 C)
[ 2.365005] isapnp: Scanning for PnP cards...
[ 2.718851] isapnp: No Plug & Play device found
[ 2.720111] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.721542] brd: module loaded
[ 2.721985] loop: module loaded
[ 2.722060] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.722138] ahci 0000:00:1f.2: version 3.0
[ 2.722153] alloc irq_desc for 20 on node -1
[ 2.722155] alloc kstat_irqs on node -1
[ 2.722164] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.722198] alloc irq_desc for 27 on node -1
[ 2.722200] alloc kstat_irqs on node -1
[ 2.722208] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 2.722272] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 2.722276] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
[ 2.722281] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.736078] scsi0 : ahci
[ 2.736182] scsi1 : ahci
[ 2.736242] scsi2 : ahci
[ 2.736447] ata1: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff900 irq 27
[ 2.736451] ata2: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff980 irq 27
[ 2.736455] ata3: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaffa00 irq 27
[ 2.736504] ata_piix 0000:00:1f.1: version 2.13
[ 2.736514] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.736559] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.736636] scsi3 : ata_piix
[ 2.736815] scsi4 : ata_piix
[ 2.738006] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.738010] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.738828] Fixed MDIO Bus: probed
[ 2.738869] PPP generic driver version 2.4.2
[ 2.738977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.738997] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.739016] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.739020] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.739079] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.742999] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.743006] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.743265] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeaff400
[ 2.747385] ata5: port disabled. ignoring.
[ 2.756019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.756102] usb usb1: configuration #1 chosen from 1 choice
[ 2.756132] hub 1-0:1.0: USB hub found
[ 2.756140] hub 1-0:1.0: 4 ports detected
[ 2.756197] alloc irq_desc for 23 on node -1
[ 2.756199] alloc kstat_irqs on node -1
[ 2.756206] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.756221] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.756224] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.756258] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.760181] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.760188] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.760202] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaff000
[ 2.773188] ACPI: Battery Slot [BAT0] (battery present)
[ 2.776098] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.776170] usb usb2: configuration #1 chosen from 1 choice
[ 2.776220] hub 2-0:1.0: USB hub found
[ 2.776229] hub 2-0:1.0: 6 ports detected
[ 2.776292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.776310] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.776348] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.776356] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.776359] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.776391] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.776424] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 2.776507] usb usb3: configuration #1 chosen from 1 choice
[ 2.776534] hub 3-0:1.0: USB hub found
[ 2.776542] hub 3-0:1.0: 2 ports detected
[ 2.776586] alloc irq_desc for 21 on node -1
[ 2.776588] alloc kstat_irqs on node -1
[ 2.776594] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.776600] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.776604] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.776632] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.776663] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
[ 2.776743] usb usb4: configuration #1 chosen from 1 choice
[ 2.776769] hub 4-0:1.0: USB hub found
[ 2.776777] hub 4-0:1.0: 2 ports detected
[ 2.776822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.776828] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.776832] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.776869] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.776893] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[ 2.776970] usb usb5: configuration #1 chosen from 1 choice
[ 2.776997] hub 5-0:1.0: USB hub found
[ 2.777005] hub 5-0:1.0: 2 ports detected
[ 2.777045] alloc irq_desc for 19 on node -1
[ 2.777047] alloc kstat_irqs on node -1
[ 2.777052] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.777059] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.777062] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.777091] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.777121] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 2.777202] usb usb6: configuration #1 chosen from 1 choice
[ 2.777228] hub 6-0:1.0: USB hub found
[ 2.777236] hub 6-0:1.0: 2 ports detected
[ 2.777277] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.777284] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.777288] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.777315] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.777339] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
[ 2.777422] usb usb7: configuration #1 chosen from 1 choice
[ 2.777449] hub 7-0:1.0: USB hub found
[ 2.777459] hub 7-0:1.0: 2 ports detected
[ 2.777563] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.781815] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.782456] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.782462] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.782465] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.782469] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.782472] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.782529] mice: PS/2 mouse device common for all mice
[ 2.782653] rtc_cmos 00:03: RTC can wake from S4
[ 2.782690] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.782716] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.782829] device-mapper: uevent: version 1.0.3
[ 2.782929] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 2.783033] device-mapper: multipath: version 1.1.0 loaded
[ 2.783036] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.783200] EISA: Probing bus 0 at eisa.0
[ 2.783228] EISA: Detected 0 cards.
[ 2.783337] cpuidle: using governor ladder
[ 2.783398] cpuidle: using governor menu
[ 2.783901] TCP cubic registered
[ 2.784068] NET: Registered protocol family 10
[ 2.784512] lo: Disabled Privacy Extensions
[ 2.784826] NET: Registered protocol family 17
[ 2.784844] Bluetooth: L2CAP ver 2.13
[ 2.784846] Bluetooth: L2CAP socket layer initialized
[ 2.784849] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.784851] Bluetooth: SCO socket layer initialized
[ 2.785049] Bluetooth: RFCOMM TTY layer initialized
[ 2.785053] Bluetooth: RFCOMM socket layer initialized
[ 2.785056] Bluetooth: RFCOMM ver 1.11
[ 2.785085] Using IPI No-Shortcut mode
[ 2.785152] PM: Resume from disk failed.
[ 2.785165] registered taskstats version 1
[ 2.785271] Magic number: 14:465:903
[ 2.785350] rtc_cmos 00:03: setting system clock to 2010-02-27 20:53:29 UTC (1267304009)
[ 2.785353] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.785355] EDD information not available.
[ 2.815942] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.908395] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[ 2.924330] ata4.00: configured for UDMA/33
[ 3.000055] Clocksource tsc unstable (delta = -196684487 ns)
[ 3.060067] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.060084] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.068064] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.214992] usb 1-2: configuration #1 chosen from 1 choice
[ 3.224033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.225146] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.225208] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 3.225212] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.547796] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL130M, max UDMA/100
[ 3.547800] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.549231] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.549325] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 3.549328] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.550177] ata1.00: configured for UDMA/100
[ 3.564178] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
[ 3.564304] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.564344] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.564390] sd 0:0:0:0: [sda] Write Protect is off
[ 3.564393] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.564417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.564543] sda:
[ 3.566726] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.40 PQ: 0 ANSI: 5
[ 3.571195] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.571198] Uniform CD-ROM driver Revision: 3.20
[ 3.571280] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.571327] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.595307] sda1 sda2 < sda5 >
[ 3.615971] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.615986] Freeing unused kernel memory: 576k freed
[ 3.616287] Write protecting the kernel text: 4496k
[ 3.616315] Write protecting the kernel read-only data: 1824k
[ 3.617836] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.835646] Linux agpgart interface v0.103
[ 3.839072] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 3.839321] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 3.842444] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.963699] [drm] Initialized drm 1.1.0 20060810
[ 3.986483] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.986490] i915 0000:00:02.0: setting latency timer to 64
[ 3.988593] alloc irq_desc for 28 on node -1
[ 3.988597] alloc kstat_irqs on node -1
[ 3.988608] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 4.092443] usb 5-1: configuration #1 chosen from 1 choice
[ 4.098055] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.098085] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 4.105806] 8139too Fast Ethernet driver 0.9.28
[ 4.105882] 8139too 0000:05:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.107019] eth0: RealTek RTL8139 at 0xc800, 00:1d:60:f4:ad:e2, IRQ 16
[ 4.228543] [drm] fb0: inteldrmfb frame buffer device
[ 4.228922] ACPI Warning: _BQC returned an invalid level 20090521 video-629
[ 4.229054] acpi device:21: registered as cooling_device1
[ 4.229179] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/input/input6
[ 4.229211] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.229230] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.574607] [drm] LVDS-8: set mode 1280x800 e
[ 4.959309] Console: switching to colour frame buffer device 160x50
[ 5.178770] PM: Starting manual resume from disk
[ 5.178774] PM: Resume from partition 8:5
[ 5.178777] PM: Checking hibernation image.
[ 5.179018] PM: Resume from disk failed.
[ 5.218552] kjournald starting. Commit interval 5 seconds
[ 5.218564] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.585633] type=1505 audit(1267304013.299:2): operation="profile_load" pid=417 name=/usr/share/gdm/guest-session/Xsession
[ 6.627675] type=1505 audit(1267304013.338:3): operation="profile_load" pid=418 name=/sbin/dhclient3
[ 6.628536] type=1505 audit(1267304013.342:4): operation="profile_load" pid=418 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.628999] type=1505 audit(1267304013.342:5): operation="profile_load" pid=418 name=/usr/lib/connman/scripts/dhclient-script
[ 6.702534] type=1505 audit(1267304013.415:6): operation="profile_load" pid=419 name=/usr/bin/evince
[ 6.716414] type=1505 audit(1267304013.430:7): operation="profile_load" pid=419 name=/usr/bin/evince-previewer
[ 6.724527] type=1505 audit(1267304013.438:8): operation="profile_load" pid=419 name=/usr/bin/evince-thumbnailer
[ 6.753445] type=1505 audit(1267304013.466:9): operation="profile_load" pid=421 name=/usr/lib/cups/backend/cups-pdf
[ 34.100168] udev: starting version 147
[ 34.124485] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
[ 34.197534] lp: driver loaded but no devices found
[ 34.340000] EXT3 FS on sda1, internal journal
[ 34.455589] asus_laptop: Asus Laptop Support version 0.42
[ 34.545068] asus_laptop: T20 model detected
[ 34.545735] input: Asus Laptop extra buttons as /devices/virtual/input/input7
[ 34.545844] Registered led device: asus::mail
[ 34.545889] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 34.565324] cfg80211: Calling CRDA to update world regulatory domain
[ 34.626153] cfg80211: World regulatory domain updated:
[ 34.626158] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 34.626161] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.626164] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.626167] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.626170] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.626173] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.662428] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 34.662532] usbcore: registered new interface driver btusb
[ 34.721612] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.851032] alloc irq_desc for 22 on node -1
[ 34.851036] alloc kstat_irqs on node -1
[ 34.851045] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 34.851081] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 34.922313] hda_codec: Unknown model for ALC660-VD, trying auto-probe from BIOS...
[ 34.922397] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 35.188598] phy0: Selected rate control algorithm 'minstrel'
[ 35.189283] phy0: hwaddr 00:16:44:69:a3:4e, RTL8187BvE V0 + rtl8225z2
[ 35.212952] rtl8187: Customer ID is 0x04
[ 35.212991] Registered led device: rtl8187-phy0::tx
[ 35.213009] Registered led device: rtl8187-phy0::rx
[ 35.213034] usbcore: registered new interface driver rtl8187
[ 35.254945] lib80211: common routines for IEEE802.11 drivers
[ 35.254949] lib80211_crypt: registered algorithm 'NULL'
[ 35.255905] lib80211_crypt: registered algorithm 'WEP'
[ 35.260528] lib80211_crypt: registered algorithm 'TKIP'
[ 35.281859] lib80211_crypt: registered algorithm 'CCMP'
[ 35.443527] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
[ 35.443536] synaptics: Toshiba Satellite L40 detected, limiting rate to 40pps.
[ 35.494408] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 35.900345] __ratelimit: 12 callbacks suppressed
[ 35.900349] type=1505 audit(1267304042.614:14): operation="profile_replace" pid=1017 name=/usr/share/gdm/guest-session/Xsession
[ 35.907082] type=1505 audit(1267304042.618:15): operation="profile_replace" pid=1018 name=/sbin/dhclient3
[ 35.907935] type=1505 audit(1267304042.618:16): operation="profile_replace" pid=1018 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 35.908428] type=1505 audit(1267304042.622:17): operation="profile_replace" pid=1018 name=/usr/lib/connman/scripts/dhclient-script
[ 35.913663] type=1505 audit(1267304042.626:18): operation="profile_replace" pid=1020 name=/usr/bin/evince
[ 35.938229] type=1505 audit(1267304042.650:19): operation="profile_replace" pid=1020 name=/usr/bin/evince-previewer
[ 35.946917] type=1505 audit(1267304042.658:20): operation="profile_replace" pid=1020 name=/usr/bin/evince-thumbnailer
[ 35.959390] type=1505 audit(1267304042.670:21): operation="profile_replace" pid=1023 name=/usr/lib/cups/backend/cups-pdf
[ 35.960415] type=1505 audit(1267304042.674:22): operation="profile_replace" pid=1023 name=/usr/sbin/cupsd
[ 36.217355] type=1505 audit(1267304042.930:23): operation="profile_replace" pid=1024 name=/usr/sbin/mysqld
[ 38.361164] QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard
[ 38.361249] KQEMU installed, max_locked_mem=1026704kB.
[ 38.551595] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.551599] Bluetooth: BNEP filters: protocol multicast
[ 38.602462] Bridge firewalling registered
[ 38.718279] ppdev: user-space parallel port driver
[ 43.806521] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 140.744424] * Hello Agere Driver **
[ 140.744462] usbcore: registered new interface driver agr12dec2006
[ 141.938230] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01)
[ 141.938237] Disabling lock debugging due to kernel taint
[ 141.957336] serial8250_register_ports: BaseAddress 0x8004 Irq 22
[ 141.957342] ttyAGS3 at I/O 0x8004 (irq = 22) is a AgereModem
[ 141.957403] agrserial - ret_val 0, call: lt_modem_ops.init_modem
[ 141.957407] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[ 155.908778] ==> codecType = 0x32
[ 155.908786] NDZ: null ResumePt in setResumeCallBack()
[ 409.239788] ==> codecType = 0x32
[ 409.239796] NDZ: null ResumePt in setResumeCallBack()
[ 412.515141] ==> codecType = 0x32
[ 412.515149] NDZ: null ResumePt in setResumeCallBack()
[ 1063.545378] wlan0: authenticate with AP 00:15:e9:de:97:b5
[ 1063.547338] wlan0: authenticated
[ 1063.547341] wlan0: associate with AP 00:15:e9:de:97:b5
[ 1063.549505] wlan0: RX AssocResp from 00:15:e9:de:97:b5 (capab=0x431 status=0 aid=1)
[ 1063.549508] wlan0: associated
[ 1063.555228] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1063.827235] padlock: VIA PadLock not detected.
[ 1071.542125] ==> codecType = 0x32
[ 1071.542134] NDZ: null ResumePt in setResumeCallBack()
[ 1074.356024] wlan0: no IPv6 routers present
[ 1074.583082] ==> codecType = 0x32
[ 1074.583089] NDZ: null ResumePt in setResumeCallBack()
[ 1078.795149] ==> codecType = 0x32
[ 1078.795157] NDZ: null ResumePt in setResumeCallBack()
[ 1812.184855] ==> codecType = 0x32
[ 1812.184862] NDZ: null ResumePt in setResumeCallBack()
[ 1860.670868] wlan0: deauthenticating by local choice (reason=3)
[ 1861.050959] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1861.050963] PM: Basic memory bitmaps created
[ 1861.050965] PM: Syncing filesystems ... done.
[ 1861.065383] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1861.066472] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1861.066557] PM: Shrinking memory... -\|/-\|/-\|/-\|/done (143593 pages freed)
[ 1862.331102] PM: Freed 574372 kbytes in 1.26 seconds (455.85 MB/s)
[ 1862.331105] Suspending console(s) (use no_console_suspend to debug)
[ 1862.332575] btusb_bulk_complete: hci0 urb f3902e80 failed to resubmit (1)
[ 1862.333566] btusb_bulk_complete: hci0 urb f395bf00 failed to resubmit (1)
[ 1862.334567] btusb_intr_complete: hci0 urb f395b580 failed to resubmit (1)
[ 1862.334586] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1862.700064] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 1862.880207] ata5: port disabled. ignoring.
[ 1862.880258] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 1862.880267] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[ 1863.141475] ACPI: Preparing to enter system sleep state S4
[ 1863.148086] PM: Saving platform NVS memory
[ 1863.155859] Disabling non-boot CPUs ...
[ 1863.155908] Extended CMOS year: 2000
[ 1863.155985] PM: Creating hibernation image:
[ 1863.156005] PM: Need to copy 126241 pages
[ 1863.156005] PM: Normal pages needed: 52660 + 1024 + 40, available pages: 174552
[ 1863.156005] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 1863.156005] PM: Restoring platform NVS memory
[ 1863.156005] CPU0: Thermal monitoring handled by SMI
[ 1863.156005] Extended CMOS year: 2000
[ 1863.156026] ACPI: Waking up from system sleep state S4
[ 1863.719397] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1863.719708] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1863.719798] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 1863.719833] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 1863.719888] 8139too 0000:05:07.0: restoring config space at offset 0x1 (was 0x2900107, writing 0x2900007)
[ 1863.787901] i915 0000:00:02.0: setting latency timer to 64
[ 1864.113417] [drm] LVDS-8: set mode 1280x800 e
[ 1864.504521] pci 0000:00:02.1: PME# disabled
[ 1864.504531] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1864.504566] usb usb3: root hub lost power or was reset
[ 1864.504602] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1864.504636] usb usb4: root hub lost power or was reset
[ 1864.504672] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1864.504677] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1864.504682] usb usb1: root hub lost power or was reset
[ 1864.508583] ehci_hcd 0000:00:1a.7: debug port 1
[ 1864.508589] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1864.508598] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1864.508621] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[ 1864.508628] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1864.508661] usb usb5: root hub lost power or was reset
[ 1864.508687] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1864.508721] usb usb6: root hub lost power or was reset
[ 1864.508738] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1864.508772] usb usb7: root hub lost power or was reset
[ 1864.508789] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1864.508794] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1864.508798] usb usb2: root hub lost power or was reset
[ 1864.512702] ehci_hcd 0000:00:1d.7: debug port 1
[ 1864.512709] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1864.512748] pci 0000:00:1e.0: setting latency timer to 64
[ 1864.512761] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1864.512766] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1864.512786] ahci 0000:00:1f.2: setting latency timer to 64
[ 1864.516372] ata5: port disabled. ignoring.
[ 1864.676399] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[ 1864.676403] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 1864.692328] ata4.00: configured for UDMA/33
[ 1864.844064] ata2: SATA link down (SStatus 0 SControl 300)
[ 1864.852065] ata3: SATA link down (SStatus 0 SControl 300)
[ 1865.004066] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1865.005155] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1865.005216] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1865.005220] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1865.334927] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1865.334995] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1865.334999] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1865.335839] ata1.00: configured for UDMA/100
[ 1865.464030] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 1865.598898] sd 0:0:0:0: [sda] Starting disk
[ 1865.756028] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 1866.037060] btusb 5-1:1.0: no reset_resume for driver btusb?
[ 1866.037063] btusb 5-1:1.1: no reset_resume for driver btusb?
[ 1866.548807] phy1: Selected rate control algorithm 'minstrel'
[ 1866.549527] phy1: hwaddr 00:16:44:69:a3:4e, RTL8187BvE V0 + rtl8225z2
[ 1866.571030] rtl8187: Customer ID is 0x04
[ 1866.571060] Registered led device: rtl8187-phy1::tx
[ 1866.571082] Registered led device: rtl8187-phy1::rx
[ 1866.571210] PM: Image restored successfully.
[ 1866.603229] Restarting tasks ... done.
[ 1866.678132] PM: Basic memory bitmaps freed
[ 1871.470494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1934.048592] ==> codecType = 0x32
[ 1934.048600] NDZ: null ResumePt in setResumeCallBack()
[ 1934.080098] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1934.080107] IP: [<f94b7a86>] CAzlIntelStop+0x1e/0x84 [agrmodem]
[ 1934.080160] *pde = 7ed5d067
[ 1934.080164] Oops: 0002 [#1] SMP
[ 1934.080167] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0/energy_full
[ 1934.080172] Modules linked in: aes_i586 aes_generic agrserial agrmodem binfmt_misc ppdev bridge stp bnep kqemu joydev lib80211_crypt_ccmp lib80211_crypt_tkip lib80211_crypt_wep lib80211 arc4 ecb snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss iptable_filter snd_seq_midi snd_rawmidi ip_tables x_tables snd_seq_midi_event btusb rtl8187 mac80211 eeprom_93cx6 cfg80211 psmouse serio_raw coretemp asus_laptop led_class snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc lp parport fbcon tileblit font bitblit softcursor 8139too 8139cp mii i915 drm i2c_algo_bit intel_agp agpgart video output
[ 1934.080218]
[ 1934.080223] Pid: 3279, comm: wvdialconf Tainted: P (2.6.31.4 #5) Satellite L40
[ 1934.080226] EIP: 0060:[<f94b7a86>] EFLAGS: 00210286 CPU: 0
[ 1934.080271] EIP is at CAzlIntelStop+0x1e/0x84 [agrmodem]
[ 1934.080274] EAX: 00000000 EBX: f871e0c4 ECX: 04f67000 EDX: f949d480
[ 1934.080276] ESI: 00000003 EDI: f871e028 EBP: f2dabc10 ESP: f2dabc08
[ 1934.080279] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1934.080282] Process wvdialconf (pid: 3279, ti=f2daa000 task=f696a5b0 task.ti=f2daa000)
[ 1934.080285] Stack:
[ 1934.080286] f871e0c4 f871e0c4 f2dabc30 f94b8724 f871e0c4 00000000 f2dabc50 f82e8c5c
[ 1934.080293] <0> f871e0c4 f3908c00 f2dabc50 f949d49b f871e0c4 00000003 0000007c f3908c00
[ 1934.080299] <0> f3908c00 f3908c00 f2dabc5c f82e8d38 f3908c00 f2dabc68 f82e7e54 f3be8e00
[ 1934.080307] Call Trace:
[ 1934.080361] [<f94b8724>] ? CAzlIntelSetPMState+0x55/0x6d [agrmodem]
[ 1934.080381] [<f82e8c5c>] ? hda_set_power_state+0x13c/0x1e0 [snd_hda_codec]
[ 1934.080436] [<f949d49b>] ? ResumeCallBack+0x1b/0x34 [agrmodem]
[ 1934.080455] [<f82e8d38>] ? hda_call_codec_resume+0x38/0x60 [snd_hda_codec]
[ 1934.080466] [<f82e7e54>] ? snd_hda_power_up+0x34/0x60 [snd_hda_codec]
[ 1934.080477] [<f82e7eb7>] ? codec_exec_verb+0x37/0xc0 [snd_hda_codec]
[ 1934.080491] [<f82e8a02>] ? snd_hda_codec_read+0x32/0x40 [snd_hda_codec]
[ 1934.080528] [<f94cd979>] ? LnxTransferCodecVerbs+0x49/0x60 [agrmodem]
[ 1934.080581] [<f94b7b1b>] ? VerbTransfer+0x2f/0x3c [agrmodem]
[ 1934.080633] [<f94b7b73>] ? GetAzCodecID+0x4b/0x63 [agrmodem]
[ 1934.080676] [<f94cd9de>] ? setResumeCallBack+0x4e/0x70 [agrmodem]
[ 1934.080721] [<f94b8788>] ? CAzlIntelInit+0x4c/0x3c4 [agrmodem]
[ 1934.080736] [<c0143edb>] ? printk+0x1b/0x20
[ 1934.080788] [<f94a19f1>] ? LXHardwareStart+0x11de/0x13fb [agrmodem]
[ 1934.080804] [<c055f2fa>] ? _spin_lock_irqsave+0x2a/0x40
[ 1934.080856] [<f949d1a8>] ? linux_modem_open+0x45/0x10e [agrmodem]
[ 1934.080868] [<c014e5a6>] ? mod_timer+0xb6/0x120
[ 1934.080899] [<f93f72a8>] ? wrap_linux_modem_open+0x8/0x10 [agrmodem]
[ 1934.080931] [<f93f7308>] ? modemPortOpen+0x8/0x20 [agrmodem]
[ 1934.080937] [<f82e2fe0>] ? serial8250_startup+0x210/0x380 [agrserial]
[ 1934.080943] [<c038a689>] ? uart_startup+0x49/0x150
[ 1934.080947] [<c038b9b3>] ? uart_open+0x103/0x390
[ 1934.080952] [<c036f80a>] ? check_tty_count+0x4a/0xb0
[ 1934.080956] [<c037255b>] ? tty_init_dev+0x8b/0x150
[ 1934.080960] [<c055f338>] ? _spin_lock+0x8/0x10
[ 1934.080963] [<c0372802>] ? tty_open+0x1e2/0x450
[ 1934.080968] [<c01e3839>] ? chrdev_open+0x99/0x150
[ 1934.080973] [<c01de351>] ? __dentry_open+0xc1/0x240
[ 1934.080977] [<c01df7d2>] ? nameidata_to_filp+0x52/0x60
[ 1934.080980] [<c01e37a0>] ? chrdev_open+0x0/0x150
[ 1934.080985] [<c01eab95>] ? do_filp_open+0x245/0x840
[ 1934.080990] [<c01de0f6>] ? do_sys_open+0x56/0x140
[ 1934.080994] [<c01de249>] ? sys_open+0x29/0x40
[ 1934.080998] [<c010306c>] ? syscall_call+0x7/0xb
[ 1934.081000] Code: 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 55 89 e5 53 83 ec 04 8b 5d 08 89 1c 24 e8 0a 22 ff ff 89 83 28 01 00 00 8b 83 14 a5 00 00 <83> 20 fd 8b 83 10 a5 00 00 83 20 fd c7 83 20 01 00 00 00 00 00
[ 1934.081035] EIP: [<f94b7a86>] CAzlIntelStop+0x1e/0x84 [agrmodem] SS:ESP 0068:f2dabc08
[ 1934.081082] CR2: 0000000000000000
[ 1934.081085] ---[ end trace 691de4007d52258a ]---
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.4 (ndz@toshi) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #5 SMP Tue Dec 22 16:25:54 MSK 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] modified: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 34124000 - 37fef661
[ 0.000000] Allocated new RAMDISK: 008a0000 - 0476b661
[ 0.000000] Move RAMDISK from 0000000034124000 - 0000000037fef660 to 008a0000 - 0476b660
[ 0.000000] ACPI: RSDP 000f8840 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7f7a0100 0008C (v01 TOSASU TOSASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: FACP 7f7a0290 000F4 (v03 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7f7a0680 0C1A0 (v01 TOSASU TOSASU00 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f7ae000 00040
[ 0.000000] ACPI: APIC 7f7a0390 0005C (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f7a0430 0003C (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7f7a0470 00176 (v01 TOSASU TOSASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7f7a03f0 00034 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7f7a05f0 00028 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7f7a0620 00054 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f7ae040 00060 (v01 TOSASU T0SASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f7ac820 00038 (v01 TOSASU TOSASU00 09000719 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7f7ae0a0 02024 (v01 TOSASU GMCHSCI 09000719 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7f7b02d0 08024 (v01 A_M_I_ OEMATKG 00000000 00000000)
[ 0.000000] ACPI: SSDT 7f7b8300 0060F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f7b8910 002CD (v01 PmRef CpuPm1 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000089b0c0] TEXT DATA BSS ==> [0000100000 - 000089b0c0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000089c000 - 000089f11c] BRK ==> [000089c000 - 000089f11c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008a0000 - 000476b661] NEW RAMDISK ==> [00008a0000 - 000476b661]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522031
[ 0.000000] free_area_init_node: node 0, pgdat c076e960, node_mem_map c476c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c5766000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
[ 0.000000] Kernel command line: root=UUID=1cd5273e-f099-41c4-93ff-083a7ea19870 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10442560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7a0)
[ 0.000000] Memory: 1987744k/2088576k available (4495k kernel code, 99596k reserved, 2125k data, 576k init, 1179272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0778000 - 0xc0808000 ( 576 kB)
[ 0.000000] .data : 0xc0563cd5 - 0xc07773c8 (2125 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0563cd5 (4495 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1728.861 MHz processor.
[ 0.001400] Console: colour VGA+ 80x25
[ 0.001405] console [tty0] enabled
[ 0.001587] hpet clockevent registered
[ 0.001591] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001598] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.72 BogoMIPS (lpj=6915444)
[ 0.001620] Security Framework initialized
[ 0.001644] AppArmor: AppArmor initialized
[ 0.001653] Mount-cache hash table entries: 512
[ 0.001807] Initializing cgroup subsys ns
[ 0.001812] Initializing cgroup subsys cpuacct
[ 0.001817] Initializing cgroup subsys memory
[ 0.001825] Initializing cgroup subsys freezer
[ 0.001828] Initializing cgroup subsys net_cls
[ 0.001845] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001848] CPU: L2 cache: 1024K
[ 0.001854] mce: CPU supports 6 MCE banks
[ 0.001862] CPU0: Thermal monitoring handled by SMI
[ 0.001867] using mwait in idle threads.
[ 0.001876] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001887] ... version: 2
[ 0.001889] ... bit width: 40
[ 0.001891] ... generic counters: 2
[ 0.001893] ... value mask: 000000ffffffffff
[ 0.001896] ... max period: 000000007fffffff
[ 0.001898] ... fixed-purpose counters: 3
[ 0.001901] ... counter mask: 0000000700000003
[ 0.001906] Checking 'hlt' instruction... OK.
[ 0.016889] SMP alternatives: switching to UP code
[ 0.024006] ACPI: Core revision 20090521
[ 0.048386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088481] CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz stepping 01
[ 0.092001] Brought up 1 CPUs
[ 0.092001] Total of 1 processors activated (3457.72 BogoMIPS).
[ 0.092001] CPU0 attaching NULL sched-domain.
[ 0.092001] Booting paravirtualized kernel on bare hardware
[ 0.092001] regulator: core version 0.5
[ 0.092001] Time: 21:37:41 Date: 02/27/10
[ 0.092001] NET: Registered protocol family 16
[ 0.092001] EISA bus registered
[ 0.092001] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.092001] ACPI: bus type pci registered
[ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.092001] PCI: Not using MMCONFIG.
[ 0.092001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.092001] PCI: Using configuration type 1 for base access
[ 0.092001] bio: create slab <bio-0> at 0
[ 0.092001] ACPI: EC: EC description table is found, configuring boot EC
[ 0.099736] ACPI: Interpreter enabled
[ 0.099743] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.099776] ACPI: Using IOAPIC for interrupt routing
[ 0.101297] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104743] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.104747] PCI: Using MMCONFIG for extended config space
[ 0.114890] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.114893] ACPI: EC: driver started in poll mode
[ 0.119222] ACPI Warning: Incorrect checksum in table [ATKG] - 32, should be 4A 20090521 tbutils-246
[ 0.119556] ACPI: No dock devices found.
[ 0.120164] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.120274] pci 0000:00:02.0: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
[ 0.120283] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.120289] pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07]
[ 0.120340] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
[ 0.120444] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]
[ 0.120502] pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.120568] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeaff400-0xfeaff7ff]
[ 0.120629] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.120634] pci 0000:00:1a.7: PME# disabled
[ 0.120681] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff]
[ 0.120733] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120738] pci 0000:00:1b.0: PME# disabled
[ 0.120810] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120815] pci 0000:00:1c.0: PME# disabled
[ 0.120889] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.120894] pci 0000:00:1c.1: PME# disabled
[ 0.120968] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.120972] pci 0000:00:1c.2: PME# disabled
[ 0.121031] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
[ 0.121090] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
[ 0.121149] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
[ 0.121216] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaff000-0xfeaff3ff]
[ 0.121276] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121282] pci 0000:00:1d.7: PME# disabled
[ 0.121423] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.121427] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.121432] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0300 (mask 0003)
[ 0.121438] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[ 0.121485] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.121493] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.121501] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.121509] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.121517] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.121580] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887]
[ 0.121587] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
[ 0.121594] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487]
[ 0.121601] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
[ 0.121609] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe09f]
[ 0.121616] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.121651] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121656] pci 0000:00:1f.2: PME# disabled
[ 0.121821] pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff]
[ 0.121826] pci 0000:00:1c.2: bridge 32bit mmio: [0xfde00000-0xfe5fffff]
[ 0.121834] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xbdf00000-0xbfefffff]
[ 0.121885] pci 0000:05:07.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.121894] pci 0000:05:07.0: reg 14 32bit mmio: [0xfe6ffc00-0xfe6ffcff]
[ 0.121945] pci 0000:05:07.0: supports D1 D2
[ 0.121948] pci 0000:05:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.121953] pci 0000:05:07.0: PME# disabled
[ 0.121995] pci 0000:00:1e.0: transparent bridge
[ 0.122000] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.122005] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.122032] pci_bus 0000:00: on NUMA node 0
[ 0.122039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.122270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.122348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.122494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.143047] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.143223] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
[ 0.143396] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[ 0.143568] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[ 0.143739] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[ 0.143908] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.144086] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.144258] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.144490] SCSI subsystem initialized
[ 0.144547] libata version 3.00 loaded.
[ 0.144626] usbcore: registered new interface driver usbfs
[ 0.144644] usbcore: registered new interface driver hub
[ 0.144669] usbcore: registered new device driver usb
[ 0.144799] ACPI: WMI: Mapper loaded
[ 0.144801] PCI: Using ACPI for IRQ routing
[ 0.144990] Bluetooth: Core ver 2.15
[ 0.145019] NET: Registered protocol family 31
[ 0.145021] Bluetooth: HCI device and connection manager initialized
[ 0.145024] Bluetooth: HCI socket layer initialized
[ 0.145026] NetLabel: Initializing
[ 0.145028] NetLabel: domain hash size = 128
[ 0.145030] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.145043] NetLabel: unlabeled traffic allowed by default
[ 0.145073] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.145078] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.149540] pnp: PnP ACPI init
[ 0.149570] ACPI: bus type pnp registered
[ 0.152770] pnp: PnP ACPI: found 13 devices
[ 0.152772] ACPI: ACPI bus type pnp unregistered
[ 0.152777] PnPBIOS: Disabled by ACPI PNP
[ 0.152790] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.152800] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.152804] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.152807] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.152810] system 00:08: ioport range 0x500-0x53f has been reserved
[ 0.152814] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.152817] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.152821] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.152824] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.152828] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.152834] system 00:0a: ioport range 0x250-0x253 has been reserved
[ 0.152837] system 00:0a: ioport range 0x256-0x25f has been reserved
[ 0.152841] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.152845] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.152850] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.152857] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.152860] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.152864] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.152867] system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.187540] AppArmor: AppArmor Filesystem Enabled
[ 0.187588] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.187591] pci 0000:00:1c.0: IO window: disabled
[ 0.187596] pci 0000:00:1c.0: MEM window: disabled
[ 0.187601] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.187605] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.187608] pci 0000:00:1c.1: IO window: disabled
[ 0.187613] pci 0000:00:1c.1: MEM window: disabled
[ 0.187617] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.187622] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.187626] pci 0000:00:1c.2: IO window: 0xb000-0xbfff
[ 0.187632] pci 0000:00:1c.2: MEM window: 0xfde00000-0xfe5fffff
[ 0.187637] pci 0000:00:1c.2: PREFETCH window: 0x000000bdf00000-0x000000bfefffff
[ 0.187645] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.187649] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.187655] pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
[ 0.187659] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.187674] alloc irq_desc for 16 on node -1
[ 0.187677] alloc kstat_irqs on node -1
[ 0.187684] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.187690] pci 0000:00:1c.0: setting latency timer to 64
[ 0.187697] alloc irq_desc for 17 on node -1
[ 0.187699] alloc kstat_irqs on node -1
[ 0.187703] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.187708] pci 0000:00:1c.1: setting latency timer to 64
[ 0.187716] alloc irq_desc for 18 on node -1
[ 0.187718] alloc kstat_irqs on node -1
[ 0.187722] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.187727] pci 0000:00:1c.2: setting latency timer to 64
[ 0.187734] pci 0000:00:1e.0: setting latency timer to 64
[ 0.187739] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.187742] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.187745] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
[ 0.187748] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfe5fffff]
[ 0.187751] pci_bus 0000:03: resource 2 pref mem [0xbdf00000-0xbfefffff]
[ 0.187754] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 0.187757] pci_bus 0000:05: resource 1 mem: [0xfe600000-0xfe6fffff]
[ 0.187760] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.187763] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.187802] NET: Registered protocol family 2
[ 0.187906] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.188252] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.188805] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.189165] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.189169] TCP reno registered
[ 0.189297] NET: Registered protocol family 1
[ 0.189377] Trying to unpack rootfs image as initramfs...
[ 0.504038] Switched to high resolution mode on CPU 0
[ 2.140511] Freeing initrd memory: 64301k freed
[ 2.183804] Simple Boot Flag at 0x51 set to 0x1
[ 2.183929] cpufreq-nforce2: No nForce2 chipset.
[ 2.183959] Scanning for low memory corruption every 60 seconds
[ 2.184129] audit: initializing netlink socket (disabled)
[ 2.184149] type=2000 audit(1267306663.184:1): initialized
[ 2.195720] highmem bounce pool size: 64 pages
[ 2.195726] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.197190] VFS: Disk quotas dquot_6.5.2
[ 2.197251] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.197823] fuse init (API version 7.12)
[ 2.197908] msgmni has been set to 1706
[ 2.198105] alg: No test for stdrng (krng)
[ 2.198118] io scheduler noop registered
[ 2.198121] io scheduler anticipatory registered
[ 2.198123] io scheduler deadline registered
[ 2.198171] io scheduler cfq registered (default)
[ 2.198185] pci 0000:00:02.0: Boot video device
[ 2.325679] alloc irq_desc for 24 on node -1
[ 2.325682] alloc kstat_irqs on node -1
[ 2.325694] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 2.325704] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.325824] alloc irq_desc for 25 on node -1
[ 2.325827] alloc kstat_irqs on node -1
[ 2.325835] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 2.325844] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.325962] alloc irq_desc for 26 on node -1
[ 2.325965] alloc kstat_irqs on node -1
[ 2.325972] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 2.325982] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.326073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.326465] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 0 ss_did 0
[ 2.326516] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 2.326525] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.326728] ACPI: AC Adapter [AC0] (on-line)
[ 2.326788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.326792] ACPI: Power Button [PWRF]
[ 2.326853] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.326856] ACPI: Power Button [PWRB]
[ 2.326899] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.326905] ACPI: Sleep Button [SLPB]
[ 2.326949] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 2.327145] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 2.333364] ACPI: Lid Switch [LID]
[ 2.334989] Monitor-Mwait will be used to enter C-1 state
[ 2.335019] Monitor-Mwait will be used to enter C-2 state
[ 2.335065] Monitor-Mwait will be used to enter C-3 state
[ 2.335074] Marking TSC unstable due to TSC halts in idle
[ 2.335114] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.335175] processor LNXCPU:00: registered as cooling_device0
[ 2.335179] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.342670] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference 20090521 nspredef-946
[ 2.342679] ACPI: Expecting a [Reference] package element, found type C
[ 2.342682] ACPI: Invalid passive threshold
[ 2.344758] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.344766] ACPI: Thermal Zone [THRM] (69 C)
[ 2.344817] isapnp: Scanning for PnP cards...
[ 2.698652] isapnp: No Plug & Play device found
[ 2.699905] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.701347] brd: module loaded
[ 2.701791] loop: module loaded
[ 2.701866] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.701945] ahci 0000:00:1f.2: version 3.0
[ 2.701960] alloc irq_desc for 20 on node -1
[ 2.701962] alloc kstat_irqs on node -1
[ 2.701971] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.702005] alloc irq_desc for 27 on node -1
[ 2.702007] alloc kstat_irqs on node -1
[ 2.702015] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 2.702078] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 2.702082] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
[ 2.702087] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.716078] scsi0 : ahci
[ 2.716183] scsi1 : ahci
[ 2.716272] scsi2 : ahci
[ 2.716492] ata1: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff900 irq 27
[ 2.716496] ata2: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff980 irq 27
[ 2.716500] ata3: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaffa00 irq 27
[ 2.716549] ata_piix 0000:00:1f.1: version 2.13
[ 2.716559] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.716604] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.716682] scsi3 : ata_piix
[ 2.716815] scsi4 : ata_piix
[ 2.718008] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.718012] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.718830] Fixed MDIO Bus: probed
[ 2.718871] PPP generic driver version 2.4.2
[ 2.718980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.718999] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.719019] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.719023] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.719084] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.722998] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.723004] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.723264] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeaff400
[ 2.727383] ata5: port disabled. ignoring.
[ 2.736336] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.736440] usb usb1: configuration #1 chosen from 1 choice
[ 2.736471] hub 1-0:1.0: USB hub found
[ 2.736480] hub 1-0:1.0: 4 ports detected
[ 2.736538] alloc irq_desc for 23 on node -1
[ 2.736541] alloc kstat_irqs on node -1
[ 2.736548] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.736562] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.736566] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.736601] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.740515] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.740522] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.740537] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaff000
[ 2.753000] ACPI: Battery Slot [BAT0] (battery present)
[ 2.756012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.756104] usb usb2: configuration #1 chosen from 1 choice
[ 2.756133] hub 2-0:1.0: USB hub found
[ 2.756143] hub 2-0:1.0: 6 ports detected
[ 2.756205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.756222] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.756259] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.756267] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.756270] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.756302] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.756335] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 2.756419] usb usb3: configuration #1 chosen from 1 choice
[ 2.756446] hub 3-0:1.0: USB hub found
[ 2.756454] hub 3-0:1.0: 2 ports detected
[ 2.756497] alloc irq_desc for 21 on node -1
[ 2.756499] alloc kstat_irqs on node -1
[ 2.756505] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.756512] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.756515] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.756543] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.756574] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
[ 2.756653] usb usb4: configuration #1 chosen from 1 choice
[ 2.756679] hub 4-0:1.0: USB hub found
[ 2.756686] hub 4-0:1.0: 2 ports detected
[ 2.756731] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.756738] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.756742] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.756778] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.756801] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[ 2.756880] usb usb5: configuration #1 chosen from 1 choice
[ 2.756906] hub 5-0:1.0: USB hub found
[ 2.756914] hub 5-0:1.0: 2 ports detected
[ 2.756955] alloc irq_desc for 19 on node -1
[ 2.756957] alloc kstat_irqs on node -1
[ 2.756962] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.756968] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.756972] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.757000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.757031] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 2.757111] usb usb6: configuration #1 chosen from 1 choice
[ 2.757138] hub 6-0:1.0: USB hub found
[ 2.757145] hub 6-0:1.0: 2 ports detected
[ 2.757187] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.757194] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.757197] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.757226] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.757249] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
[ 2.757332] usb usb7: configuration #1 chosen from 1 choice
[ 2.757358] hub 7-0:1.0: USB hub found
[ 2.757369] hub 7-0:1.0: 2 ports detected
[ 2.757473] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.761676] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.762316] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.762322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.762326] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.762329] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.762332] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.762391] mice: PS/2 mouse device common for all mice
[ 2.762514] rtc_cmos 00:03: RTC can wake from S4
[ 2.762553] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.762579] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.762693] device-mapper: uevent: version 1.0.3
[ 2.762792] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 2.763044] device-mapper: multipath: version 1.1.0 loaded
[ 2.763048] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.763211] EISA: Probing bus 0 at eisa.0
[ 2.763240] EISA: Detected 0 cards.
[ 2.763349] cpuidle: using governor ladder
[ 2.763410] cpuidle: using governor menu
[ 2.763914] TCP cubic registered
[ 2.764081] NET: Registered protocol family 10
[ 2.764524] lo: Disabled Privacy Extensions
[ 2.764838] NET: Registered protocol family 17
[ 2.764856] Bluetooth: L2CAP ver 2.13
[ 2.764858] Bluetooth: L2CAP socket layer initialized
[ 2.764861] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.764863] Bluetooth: SCO socket layer initialized
[ 2.764903] Bluetooth: RFCOMM TTY layer initialized
[ 2.764906] Bluetooth: RFCOMM socket layer initialized
[ 2.764908] Bluetooth: RFCOMM ver 1.11
[ 2.764938] Using IPI No-Shortcut mode
[ 2.765006] PM: Resume from disk failed.
[ 2.765018] registered taskstats version 1
[ 2.765124] Magic number: 14:812:652
[ 2.765203] rtc_cmos 00:03: setting system clock to 2010-02-27 21:37:44 UTC (1267306664)
[ 2.765207] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.765209] EDD information not available.
[ 2.795847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.888364] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[ 2.904295] ata4.00: configured for UDMA/33
[ 3.000021] Clocksource tsc unstable (delta = -217206267 ns)
[ 3.040032] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.040050] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.048029] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.194989] usb 1-2: configuration #1 chosen from 1 choice
[ 3.204032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.205148] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.205209] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 3.205213] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.565492] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL130M, max UDMA/100
[ 3.565495] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.566956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.567049] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 3.567053] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.567877] ata1.00: configured for UDMA/100
[ 3.580145] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
[ 3.580272] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.580312] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.580358] sd 0:0:0:0: [sda] Write Protect is off
[ 3.580361] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.580385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.580511] sda:
[ 3.582750] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.40 PQ: 0 ANSI: 5
[ 3.587299] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.587303] Uniform CD-ROM driver Revision: 3.20
[ 3.587385] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.587432] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.613043] sda1 sda2 <
[ 3.616032] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.633462] sda5 >
[ 3.633713] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.633729] Freeing unused kernel memory: 576k freed
[ 3.634018] Write protecting the kernel text: 4496k
[ 3.634045] Write protecting the kernel read-only data: 1824k
[ 3.849210] Linux agpgart interface v0.103
[ 3.852683] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 3.852938] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 3.860831] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.860862] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.863960] 8139too Fast Ethernet driver 0.9.28
[ 3.864063] 8139too 0000:05:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.908444] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.913227] eth0: RealTek RTL8139 at 0xc800, 00:1d:60:f4:ad:e2, IRQ 16
[ 3.994966] [drm] Initialized drm 1.1.0 20060810
[ 4.015095] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.015103] i915 0000:00:02.0: setting latency timer to 64
[ 4.017265] alloc irq_desc for 28 on node -1
[ 4.017270] alloc kstat_irqs on node -1
[ 4.017280] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 4.119227] usb 5-1: configuration #1 chosen from 1 choice
[ 4.244458] [drm] fb0: inteldrmfb frame buffer device
[ 4.244807] ACPI Warning: _BQC returned an invalid level 20090521 video-629
[ 4.244934] acpi device:21: registered as cooling_device1
[ 4.245056] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/input/input6
[ 4.245086] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.245104] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.584608] [drm] LVDS-8: set mode 1280x800 e
[ 5.010054] Console: switching to colour frame buffer device 160x50
[ 5.279005] PM: Starting manual resume from disk
[ 5.279010] PM: Resume from partition 8:5
[ 5.279012] PM: Checking hibernation image.
[ 5.279259] PM: Resume from disk failed.
[ 5.314081] kjournald starting. Commit interval 5 seconds
[ 5.314093] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.681164] type=1505 audit(1267306668.415:2): operation="profile_load" pid=416 name=/usr/share/gdm/guest-session/Xsession
[ 6.723196] type=1505 audit(1267306668.454:3): operation="profile_load" pid=417 name=/sbin/dhclient3
[ 6.724061] type=1505 audit(1267306668.458:4): operation="profile_load" pid=417 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.724524] type=1505 audit(1267306668.458:5): operation="profile_load" pid=417 name=/usr/lib/connman/scripts/dhclient-script
[ 6.798084] type=1505 audit(1267306668.531:6): operation="profile_load" pid=418 name=/usr/bin/evince
[ 6.811919] type=1505 audit(1267306668.542:7): operation="profile_load" pid=418 name=/usr/bin/evince-previewer
[ 6.820071] type=1505 audit(1267306668.554:8): operation="profile_load" pid=418 name=/usr/bin/evince-thumbnailer
[ 6.848976] type=1505 audit(1267306668.582:9): operation="profile_load" pid=420 name=/usr/lib/cups/backend/cups-pdf
[ 34.217885] udev: starting version 147
[ 34.256491] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
[ 34.367097] lp: driver loaded but no devices found
[ 34.460020] EXT3 FS on sda1, internal journal
[ 34.661710] asus_laptop: Asus Laptop Support version 0.42
[ 34.714604] asus_laptop: T20 model detected
[ 34.717833] input: Asus Laptop extra buttons as /devices/virtual/input/input7
[ 34.728209] Registered led device: asus::mail
[ 34.728253] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 34.751176] cfg80211: Calling CRDA to update world regulatory domain
[ 34.789884] cfg80211: World regulatory domain updated:
[ 34.789889] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 34.789892] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.789895] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.789899] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.789901] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.789904] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.837334] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 34.837439] usbcore: registered new interface driver btusb
[ 34.872131] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.965040] alloc irq_desc for 22 on node -1
[ 34.965044] alloc kstat_irqs on node -1
[ 34.965052] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 34.965096] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 35.039087] hda_codec: Unknown model for ALC660-VD, trying auto-probe from BIOS...
[ 35.039167] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 35.305292] phy0: Selected rate control algorithm 'minstrel'
[ 35.305979] phy0: hwaddr 00:16:44:69:a3:4e, RTL8187BvE V0 + rtl8225z2
[ 35.328074] rtl8187: Customer ID is 0x04
[ 35.328112] Registered led device: rtl8187-phy0::tx
[ 35.328130] Registered led device: rtl8187-phy0::rx
[ 35.328157] usbcore: registered new interface driver rtl8187
[ 35.371346] lib80211: common routines for IEEE802.11 drivers
[ 35.371351] lib80211_crypt: registered algorithm 'NULL'
[ 35.372400] lib80211_crypt: registered algorithm 'WEP'
[ 35.376943] lib80211_crypt: registered algorithm 'TKIP'
[ 35.379896] lib80211_crypt: registered algorithm 'CCMP'
[ 35.549286] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
[ 35.549294] synaptics: Toshiba Satellite L40 detected, limiting rate to 40pps.
[ 35.617123] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 36.173944] __ratelimit: 12 callbacks suppressed
[ 36.173948] type=1505 audit(1267306697.906:14): operation="profile_replace" pid=995 name=/usr/share/gdm/guest-session/Xsession
[ 36.191839] type=1505 audit(1267306697.922:15): operation="profile_replace" pid=996 name=/sbin/dhclient3
[ 36.192710] type=1505 audit(1267306697.926:16): operation="profile_replace" pid=996 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 36.193173] type=1505 audit(1267306697.926:17): operation="profile_replace" pid=996 name=/usr/lib/connman/scripts/dhclient-script
[ 36.198447] type=1505 audit(1267306697.930:18): operation="profile_replace" pid=1000 name=/usr/bin/evince
[ 36.247199] type=1505 audit(1267306697.978:19): operation="profile_replace" pid=1000 name=/usr/bin/evince-previewer
[ 36.280102] type=1505 audit(1267306698.014:20): operation="profile_replace" pid=1000 name=/usr/bin/evince-thumbnailer
[ 36.294406] type=1505 audit(1267306698.026:21): operation="profile_replace" pid=1017 name=/usr/lib/cups/backend/cups-pdf
[ 36.295400] type=1505 audit(1267306698.026:22): operation="profile_replace" pid=1017 name=/usr/sbin/cupsd
[ 36.506360] type=1505 audit(1267306698.238:23): operation="profile_replace" pid=1018 name=/usr/sbin/mysqld
[ 38.834147] QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard
[ 38.834233] KQEMU installed, max_locked_mem=1026704kB.
[ 39.015732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.015735] Bluetooth: BNEP filters: protocol multicast
[ 39.056263] Bridge firewalling registered
[ 39.234661] ppdev: user-space parallel port driver
[ 43.970559] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 249.120058] * Hello Agere Driver **
[ 249.120099] usbcore: registered new interface driver agr12dec2006
[ 250.316894] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01)
[ 250.316901] Disabling lock debugging due to kernel taint
[ 250.344061] serial8250_register_ports: BaseAddress 0x8004 Irq 22
[ 250.344068] ttyAGS3 at I/O 0x8004 (irq = 22) is a AgereModem
[ 250.344131] agrserial - ret_val 0, call: lt_modem_ops.init_modem
[ 250.344136] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[ 268.565988] ==> codecType = 0x32
[ 268.565997] NDZ: null ResumePt in setResumeCallBack()
[ 348.589632] ==> codecType = 0x32
[ 348.589640] NDZ: null ResumePt in setResumeCallBack()
[ 380.549310] wlan0: authenticate with AP 00:15:e9:de:97:b5
[ 380.551272] wlan0: authenticated
[ 380.551275] wlan0: associate with AP 00:15:e9:de:97:b5
[ 380.553319] wlan0: RX AssocResp from 00:15:e9:de:97:b5 (capab=0x431 status=0 aid=1)
[ 380.553322] wlan0: associated
[ 380.559078] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 380.842694] padlock: VIA PadLock not detected.
[ 390.772020] wlan0: no IPv6 routers present
[ 396.811217] ==> codecType = 0x32
[ 396.811226] NDZ: null ResumePt in setResumeCallBack()
[ 404.072659] Unloading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[ 404.078283] usbcore: deregistering interface driver agr12dec2006
[ 404.078371] Unloading Agere Modem Controller driver: version 2.1.80
[ 412.103030] * Hello Agere Driver **
[ 412.103078] usbcore: registered new interface driver agr12dec2006
[ 413.269056] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01)
[ 413.272412] serial8250_register_ports: BaseAddress 0x8004 Irq 22
[ 413.272418] ttyAGS3 at I/O 0x8004 (irq = 22) is a AgereModem
[ 413.272480] agrserial - ret_val 0, call: lt_modem_ops.init_modem
[ 413.272484] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[ 420.182042] ==> codecType = 0x32
[ 420.182051] NDZ: null ResumePt in setResumeCallBack()
[ 474.129634] ==> codecType = 0x32
[ 474.129643] NDZ: null ResumePt in setResumeCallBack()
[ 731.423580] ==> codecType = 0x32
[ 731.423588] NDZ: null ResumePt in setResumeCallBack()
[ 748.461602] ==> codecType = 0x32
[ 748.461610] NDZ: null ResumePt in setResumeCallBack()
[ 1046.255284] ==> codecType = 0x32
[ 1046.255290] NDZ: null ResumePt in setResumeCallBack()
[ 1064.649726] Unloading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[ 1064.654768] usbcore: deregistering interface driver agr12dec2006
[ 1064.654852] Unloading Agere Modem Controller driver: version 2.1.80
[ 1080.502679] wlan0: deauthenticating by local choice (reason=3)
[ 1080.779687] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1080.779692] PM: Basic memory bitmaps created
[ 1080.779694] PM: Syncing filesystems ... done.
[ 1080.789007] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1080.790073] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1080.790154] PM: Shrinking memory... -\|/-\|/-done (76819 pages freed)
[ 1081.644040] PM: Freed 307276 kbytes in 0.85 seconds (361.50 MB/s)
[ 1081.644044] Suspending console(s) (use no_console_suspend to debug)
[ 1081.645780] btusb_bulk_complete: hci0 urb f2ce7080 failed to resubmit (1)
[ 1081.646766] btusb_bulk_complete: hci0 urb f2ce7980 failed to resubmit (1)
[ 1081.647768] btusb_intr_complete: hci0 urb f2d21000 failed to resubmit (1)
[ 1081.647787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1082.016065] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 1082.196204] ata5: port disabled. ignoring.
[ 1082.196255] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 1082.196265] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[ 1082.460951] ACPI: Preparing to enter system sleep state S4
[ 1082.468175] PM: Saving platform NVS memory
[ 1082.477479] Disabling non-boot CPUs ...
[ 1082.477529] Extended CMOS year: 2000
[ 1082.477606] PM: Creating hibernation image:
[ 1082.480004] PM: Need to copy 125956 pages
[ 1082.480004] PM: Normal pages needed: 26025 + 1024 + 40, available pages: 201187
[ 1082.480004] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 1082.480004] PM: Restoring platform NVS memory
[ 1082.480004] CPU0: Thermal monitoring handled by SMI
[ 1082.480004] Extended CMOS year: 2000
[ 1082.480004] ACPI: Waking up from system sleep state S4
[ 1083.039391] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1083.039702] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1083.039791] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 1083.039826] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 1083.039880] 8139too 0000:05:07.0: restoring config space at offset 0x1 (was 0x2900107, writing 0x2900007)
[ 1083.115617] i915 0000:00:02.0: setting latency timer to 64
[ 1083.441292] [drm] LVDS-8: set mode 1280x800 e
[ 1083.859078] pci 0000:00:02.1: PME# disabled
[ 1083.859087] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1083.859123] usb usb3: root hub lost power or was reset
[ 1083.859159] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1083.859193] usb usb4: root hub lost power or was reset
[ 1083.859229] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1083.859234] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1083.859239] usb usb1: root hub lost power or was reset
[ 1083.863119] ehci_hcd 0000:00:1a.7: debug port 1
[ 1083.863125] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1083.863134] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1083.863157] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[ 1083.863164] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1083.863197] usb usb5: root hub lost power or was reset
[ 1083.863223] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1083.863257] usb usb6: root hub lost power or was reset
[ 1083.863274] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1083.863307] usb usb7: root hub lost power or was reset
[ 1083.863325] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1083.863330] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1083.863334] usb usb2: root hub lost power or was reset
[ 1083.867238] ehci_hcd 0000:00:1d.7: debug port 1
[ 1083.867245] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1083.867255] pci 0000:00:1e.0: setting latency timer to 64
[ 1083.867267] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1083.867272] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1083.868442] ata5: port disabled. ignoring.
[ 1083.870775] ahci 0000:00:1f.2: setting latency timer to 64
[ 1084.032398] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[ 1084.032402] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 1084.048328] ata4.00: configured for UDMA/33
[ 1084.196067] ata2: SATA link down (SStatus 0 SControl 300)
[ 1084.204068] ata3: SATA link down (SStatus 0 SControl 300)
[ 1084.356085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1084.357176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1084.357237] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1084.357240] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1084.707807] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1084.707897] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1084.707901] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1084.709803] ata1.00: configured for UDMA/100
[ 1084.820032] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 1084.954979] sd 0:0:0:0: [sda] Starting disk
[ 1085.120030] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 1085.401092] btusb 5-1:1.0: no reset_resume for driver btusb?
[ 1085.401095] btusb 5-1:1.1: no reset_resume for driver btusb?
[ 1085.912775] phy1: Selected rate control algorithm 'minstrel'
[ 1085.913490] phy1: hwaddr 00:16:44:69:a3:4e, RTL8187BvE V0 + rtl8225z2
[ 1085.934999] rtl8187: Customer ID is 0x04
[ 1085.935027] Registered led device: rtl8187-phy1::tx
[ 1085.935045] Registered led device: rtl8187-phy1::rx
[ 1085.935173] PM: Image restored successfully.
[ 1085.966227] Restarting tasks ... done.
[ 1086.076159] PM: Basic memory bitmaps freed
[ 1090.766484] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1112.421269] wlan0: authenticate with AP 00:15:e9:de:97:b5
[ 1112.423262] wlan0: authenticated
[ 1112.423265] wlan0: associate with AP 00:15:e9:de:97:b5
[ 1112.425433] wlan0: RX AssocResp from 00:15:e9:de:97:b5 (capab=0x431 status=0 aid=1)
[ 1112.425437] wlan0: associated
[ 1112.431293] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1122.784023] wlan0: no IPv6 routers present
[ 1128.025101] * Hello Agere Driver **
[ 1128.025143] usbcore: registered new interface driver agr12dec2006
[ 1129.190172] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01)
[ 1129.193355] serial8250_register_ports: BaseAddress 0x8004 Irq 22
[ 1129.193361] ttyAGS3 at I/O 0x8004 (irq = 22) is a AgereModem
[ 1129.193430] agrserial - ret_val 0, call: lt_modem_ops.init_modem
[ 1129.193435] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01)
[ 1144.845706] ==> codecType = 0x32
[ 1144.845715] NDZ: null ResumePt in setResumeCallBack()
[ 1144.876100] BUG: unable to handle kernel NULL pointer dereference at 00000060
[ 1144.876108] IP: [<f8631498>] ResumeCallBack+0x18/0x34 [agrmodem]
[ 1144.876167] *pde = 75a50067
[ 1144.876170] Oops: 0000 [#1] SMP
[ 1144.876173] last sysfs file: /sys/devices/virtual/tty/ttyAGS3/dev
[ 1144.876177] Modules linked in: agrserial agrmodem aes_i586 aes_generic binfmt_misc ppdev bridge stp bnep kqemu joydev lib80211_crypt_ccmp lib80211_crypt_tkip lib80211_crypt_wep lib80211 arc4 ecb snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm iptable_filter snd_seq_dummy ip_tables x_tables snd_seq_oss btusb rtl8187 mac80211 eeprom_93cx6 cfg80211 psmouse serio_raw coretemp asus_laptop led_class snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc lp parport fbcon tileblit font bitblit softcursor i915 drm i2c_algo_bit 8139too 8139cp mii intel_agp agpgart video output [last unloaded: agrmodem]
[ 1144.876225]
[ 1144.876229] Pid: 3151, comm: wvdialconf Tainted: P (2.6.31.4 #5) Satellite L40
[ 1144.876233] EIP: 0060:[<f8631498>] EFLAGS: 00210282 CPU: 0
[ 1144.876283] EIP is at ResumeCallBack+0x18/0x34 [agrmodem]
[ 1144.876286] EAX: f3055000 EBX: 00000000 ECX: 04f67000 EDX: f8631480
[ 1144.876289] ESI: f3055000 EDI: f86be028 EBP: f63e5c50 ESP: f63e5c38
[ 1144.876292] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1144.876295] Process wvdialconf (pid: 3151, ti=f63e4000 task=f3993ed0 task.ti=f63e4000)
[ 1144.876297] Stack:
[ 1144.876299] 00000000 00000003 0000007c f3055000 f3055000 f3055000 f63e5c5c f8921d38
[ 1144.876305] <0> f3055000 f63e5c68 f8920e54 f3086000 f63e5c8c f8920eb7 f3086074 f63e5c94
[ 1144.876312] <0> 100f0000 01000003 f63e5c94 100f0000 f86be028 f63e5ca0 f8921a02 ffffffff
[ 1144.876319] Call Trace:
[ 1144.876335] [<f8921d38>] ? hda_call_codec_resume+0x38/0x60 [snd_hda_codec]
[ 1144.876347] [<f8920e54>] ? snd_hda_power_up+0x34/0x60 [snd_hda_codec]
[ 1144.876358] [<f8920eb7>] ? codec_exec_verb+0x37/0xc0 [snd_hda_codec]
[ 1144.876376] [<f8921a02>] ? snd_hda_codec_read+0x32/0x40 [snd_hda_codec]
[ 1144.876412] [<f8661979>] ? LnxTransferCodecVerbs+0x49/0x60 [agrmodem]
[ 1144.876466] [<f864bb1b>] ? VerbTransfer+0x2f/0x3c [agrmodem]
[ 1144.876519] [<f864bb73>] ? GetAzCodecID+0x4b/0x63 [agrmodem]
[ 1144.876562] [<f86619de>] ? setResumeCallBack+0x4e/0x70 [agrmodem]
[ 1144.876608] [<f864c788>] ? CAzlIntelInit+0x4c/0x3c4 [agrmodem]
[ 1144.876623] [<c0143edb>] ? printk+0x1b/0x20
[ 1144.876675] [<f86359f1>] ? LXHardwareStart+0x11de/0x13fb [agrmodem]
[ 1144.876691] [<c055f2fa>] ? _spin_lock_irqsave+0x2a/0x40
[ 1144.876743] [<f86311a8>] ? linux_modem_open+0x45/0x10e [agrmodem]
[ 1144.876755] [<c014e5a6>] ? mod_timer+0xb6/0x120
[ 1144.876787] [<f858b2a8>] ? wrap_linux_modem_open+0x8/0x10 [agrmodem]
[ 1144.876818] [<f858b308>] ? modemPortOpen+0x8/0x20 [agrmodem]
[ 1144.876824] [<f86fcfe0>] ? serial8250_startup+0x210/0x380 [agrserial]
[ 1144.876830] [<c038a689>] ? uart_startup+0x49/0x150
[ 1144.876835] [<c038b9b3>] ? uart_open+0x103/0x390
[ 1144.876840] [<c036f80a>] ? check_tty_count+0x4a/0xb0
[ 1144.876843] [<c037255b>] ? tty_init_dev+0x8b/0x150
[ 1144.876847] [<c055f338>] ? _spin_lock+0x8/0x10
[ 1144.876851] [<c0372802>] ? tty_open+0x1e2/0x450
[ 1144.876855] [<c01e3839>] ? chrdev_open+0x99/0x150
[ 1144.876860] [<c01de351>] ? __dentry_open+0xc1/0x240
[ 1144.876864] [<c01df7d2>] ? nameidata_to_filp+0x52/0x60
[ 1144.876868] [<c01e37a0>] ? chrdev_open+0x0/0x150
[ 1144.876873] [<c01eab95>] ? do_filp_open+0x245/0x840
[ 1144.876878] [<c01de0f6>] ? do_sys_open+0x56/0x140
[ 1144.876882] [<c01de249>] ? sys_open+0x29/0x40
[ 1144.876886] [<c010306c>] ? syscall_call+0x7/0xb
[ 1144.876888] Code: 89 d8 83 c4 2c 5b 5e 5f 5d c3 90 90 90 90 90 90 90 90 90 55 89 e5 53 83 ec 14 8b 1d 68 55 6b f8 c7 44 24 04 03 00 00 00 89 1c 24 <ff> 53 60 c7 44 24 04 00 00 00 00 89 1c 24 ff 53 60 b8 00 00 00
[ 1144.876923] EIP: [<f8631498>] ResumeCallBack+0x18/0x34 [agrmodem] SS:ESP 0068:f63e5c38
[ 1144.876976] CR2: 0000000000000060
[ 1144.876979] ---[ end trace 5b04b6d63544eab7 ]---
--- ../agrsm-11c11040-2.1.80~20091225/HDA.c 2010-02-14 14:08:44.000000000 +0300
+++ HDA.c 2010-02-28 01:22:58.000000000 +0300
@@ -301,8 +301,12 @@
int fnatr setResumeCallBack(int *ResumeCallBack)
{
+ ResumePt = NULL;
+ AgrHDACodec->patch_ops.resume = NULL;
+#if 0
ResumePt = (int *)AgrHDACodec->patch_ops.resume;
AgrHDACodec->patch_ops.resume=(void *)ResumeCallBack;
+#endif
return(1);
}
int fnatr setSuspendCallBack(int *SuspendCallBack)
