Re: checking the necessity of "Carrier Check"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



does the result below mean that there aren't any drivers for the newly
appeared 2.6.31-17 (and does this mean that if i found
drivers[=modules??] for 2.6.31-17 i might have a possibility to have
internet access through my 2.6.31-17?) ?
sorry for pre-beginners level and thanks a lot for always bringing up
a new piece of knowledge.

pedeli@pedeli-desktop:~$ find /lib/modules  -name slamr.ko

/lib/modules/2.6.28-16-generic/extra/slamr.ko
/lib/modules/2.6.31-14-generic/extra/slamr.ko
pedeli@pedeli-desktop:~$

Βασίλης

2010/1/14, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
> OK Thanks.
> Carrrier Check = no
> is still necessary and slamr is not functional yet under 2.6.31
>
> Your systems does have separate drivers for each kernel.  You can
> display them with:
> $ find /lib/modules  -name slamr.ko
>
> MarvS
>
> 2010/1/13 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>> 2010/1/13, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>> Βασίλης & Antonio
>>>
>>> Would you please try an experiment concering slamr?!
>>> Within the /etc/wvdial.conf,  temporarily change to comment out
>>> Carrier check line with a leading #.  Then test dialouts under both
>>> 2.6.31 kernels and the prior kernel under which the modem functioned.
>>>
>>> This is to check whether the "Carrier Check" is still necessary at
>>> all, under evolution of the kernel and /dev/pts support
>>>
>>> ===========
>> 1) sudo gedit /etc/wvdial.conf
>> 2) type a "#" in front of the Carrier Check = no
>> 3) exit
>> 4) new terminal
>> 5) pedeli@pedeli-desktop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot open /dev/ttySL0: No such file or directory
>> --> Cannot open /dev/ttySL0: No such file or directory
>> --> Cannot open /dev/ttySL0: No such file or directory
>> pedeli@pedeli-desktop:~$
>> 6) restart computer under the same (2.6.31-17)
>> 7) new terminal
>> 8) pedeli@pedeli-desktop:~$ sudo wvdial
>> [sudo] password for pedeli:
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot open /dev/ttySL0: No such file or directory
>> --> Cannot open /dev/ttySL0: No such file or directory
>> --> Cannot open /dev/ttySL0: No such file or directory
>> pedeli@pedeli-desktop:~$ sudo /etc/init.d/sl-modem-daemon restart
>> Shutting down SmartLink Modem driver normally ... no slmodemd daemon
>> running.
>> Unloading modem driver from kernel ... snd_atiixp_modem.
>> SmartLink modem driver not available for this Kernel. Please read
>> README.Debian
>> or try to install the package sl-modem-modules-2.6.31-17-generic.
>> Exiting...
>> pedeli@pedeli-desktop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot open /dev/ttySL0: No such file or directory
>> --> Cannot open /dev/ttySL0: No such file or directory
>> --> Cannot open /dev/ttySL0: No such file or directory
>> pedeli@pedeli-desktop:~$
>>
>> indeed; the driver installed is for 2.6.28 [[could it work improvizing
>> for 2.6.31 also?]]
>> 9) restart computer under the other 2.6.31-14
>> 10)new terminal
>> 11) pedeli@pedeli-desktop:~$ sudo wvdial
>> [sudo] password for pedeli:
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ^CCaught signal 2:  Attempting to exit gracefully...
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Disconnecting at Wed Jan 13 15:04:37 2010
>> pedeli@pedeli-desktop:~$
>>
>> stopped it with Ctrl-C
>> 12) pedeli@pedeli-desktop:~$ sudo /etc/init.d/sl-modem-daemon restart
>> Shutting down SmartLink Modem driver normally.
>> Unloading modem driver from kernel ... slamr.
>> Starting SmartLink Modem driver for: slamr0.
>> Creating /dev/modem symlink, pointing to: /dev/ttySL0.
>> pedeli@pedeli-desktop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> NO CARRIER
>> ERROR
>> --> No Carrier!  Trying again.
>> ^CCaught signal 2:  Attempting to exit gracefully...
>> --> Disconnecting at Wed Jan 13 15:05:51 2010
>> pedeli@pedeli-desktop:~$
>>
>> again stopped it with Ctrl-C
>> 13) restart, now entering the formerly functional 2.6.28-16
>> 14) new terminal
>> 15) pedeli@pedeli-desktop:~$ sudo wvdial
>> [sudo] password for pedeli:
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> CONNECT 46667
>> You have entered dc-das01.netone.gr on line 56
>> ()
>> User Access Verification
>> Username:
>> --> Carrier detected.  Waiting for prompt.
>> --> Connected, but carrier signal lost!  Retrying...
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> Username:
>> Username:
>> Username:
>> Username:
>> NO CARRIER
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> ^CCaught signal 2:  Attempting to exit gracefully...
>> --> Disconnecting at Wed Jan 13 15:13:43 2010
>> pedeli@pedeli-desktop:~$ sudo /etc/init.d/sl-modem-daemon restart
>> Shutting down SmartLink Modem driver normally.
>> Unloading modem driver from kernel ... slamr.
>> Starting SmartLink Modem driver for: slamr0.
>> Creating /dev/modem symlink, pointing to: /dev/ttySL0.
>> pedeli@pedeli-desktop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> CONNECT 46667
>> You have entered dc-das01.netone.gr on line 52
>> ()
>> User Access Verification
>> Username:
>> --> Carrier detected.  Waiting for prompt.
>> --> Connected, but carrier signal lost!  Retrying...
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> Username:
>> Username:
>> Username:
>> Username:
>> NO CARRIER
>> --> No Carrier!  Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> BUSY
>> --> The line is busy. Trying again.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> ^CCaught signal 2:  Attempting to exit gracefully...
>> --> Disconnecting at Wed Jan 13 15:14:45 2010
>> pedeli@pedeli-desktop:~$
>> 16) pedeli@pedeli-desktop:~$ sudo gedit /etc/wvdial.conf
>> 17) removed the "#"
>> 18) pedeli@pedeli-desktop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> --> Sending: ATQ0
>> --> Re-Sending: ATZ
>> --> Modem not responding.
>> pedeli@pedeli-desktop:~$ sudo /etc/init.d/sl-modem-daemon restart
>> Shutting down SmartLink Modem driver normally.
>> Unloading modem driver from kernel ... slamr.
>> Starting SmartLink Modem driver for: slamr0.
>> Creating /dev/modem symlink, pointing to: /dev/ttySL0.
>> pedeli@pedeli-desktop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> CONNECT 46667
>> You have entered dc-das01.netone.gr on line 55
>> ()
>> User Access Verification
>> Username:
>> --> Carrier detected.  Waiting for prompt.
>> Username:
>> --> Looks like a login prompt.
>> --> Sending: piperas
>> piperas
>> Password:
>> --> Looks like a password prompt.
>> --> Sending: (password)
>> Entering PPP mode.
>> Async interface address is unnumbered (FastEthernet0)
>> Your IP address is 0.0.0.0. MTU is 1500 bytes
>> --> Looks like a welcome message.
>> --> Starting pppd at Wed Jan 13 15:17:17 2010
>> --> Pid of pppd: 1823
>> --> Using interface ppp0
>> --> pppd: �1�[08]�(�[08]
>> --> pppd: �1�[08]�(�[08]
>> --> pppd: �1�[08]�(�[08]
>> --> pppd: �1�[08]�(�[08]
>> --> pppd: �1�[08]�(�[08]
>> --> pppd: �1�[08]�(�[08]
>> --> local  IP address 212.107.27.34
>> --> pppd: �1�[08]�(�[08]
>> --> remote IP address 212.107.0.18
>> --> pppd: �1�[08]�(�[08]
>> --> primary   DNS address 77.83.1.101
>> --> pppd: �1�[08]�(�[08]
>> --> secondary DNS address 77.83.1.102
>> --> pppd: �1�[08]�(�[08]
>> 19) back on-line i am sending the two separate emails [i hope noone
>> will be mad at me for doing so..]
>>
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux