Marvin, I will surely try with this and let you know of any update. Manish On Fri, 2009-10-09 at 21:39 -0400, Marvin Stodolsky wrote: > Manish, > > Try doing the manual compile with the > dkms-agrsm-SOURCE-2.1.80-9mdv2009.0.tgz resource. > Then you can determine if there is a compile problem. > > MarvS > > On Fri, Oct 9, 2009 at 9:22 PM, Manish Kalonia > <manishkalonia85@xxxxxxxxx> wrote: > > Marvin, > > > > I researched a bit on the internet. I came accross some "option" > > settings for the snd_hda_intel module. After those settings my sound is > > working very fine with both the speakers and the headphones. > > > > And I forgot to tell you that those packages, > > dkms-agrsm-2.1.80-9mdv2009.0.i586.rpm, were not getting installed. On > > the command prompt, it was showing me that it got installed. But > > instead, it was getting included in the dkms source list, to be > > installed on the next boot-up. And on the next boot-up, it gave me > > "error 10". So I was not able to get the things done. > > > > The settings I used for my Compaq CQ45-137TX Fedora 11 > > kernel-2.6.30.8-64-PAE machine are: > > > > options snd-pcsp index=-2 > > options snd slots=snd-hda-intel > > options snd-hda-intel model=hp-m4 > > alias snd-card-0 snd-hda-intel > > options snd-hda-intel enable_msi=1 > > > > I had to add myself to the audio users group too. > > > > After these settings, my sound is working very fine. And the sound is > > automatically driven through headphones when I plug them in, and back to > > speakers if I unplug them. The same as I was expecting. > > > > Thanks for your support. I hope this information can be of any help to > > you. > > > > On Fri, 2009-10-09 at 06:11 -0400, Marvin Stodolsky wrote: > >> Manish, > >> > >> Put the following as a SINGLE LINE: > >> install agrserial /sbin/modprobe --ignore-install agrmodem ; > >> /sbin/modprobe --ignore-install agrserial && \ > >> test -e /dev/ttySAGR || ln -s /dev/ttyAGS3 /dev/ttySAGR > >> > >> somewhere in your /etc/modprobe.conf or /etc/modprobe.d/ files, > >> depending upon your System > >> Thereafter the drivers will be loaded and ports created in the future > >> by a simple: > >> # modprobe agrserial > >> > >> which should be done this manually after a bootup > >> > >> Beyond that, I can't assist with the sound problems of your particular kernels. > >> Please do report back on the kernels which the modem may be functional under. > >> > >> MarvS > >> > >> > >> On Thu, Oct 8, 2009 at 12:01 AM, Manish Kalonia > >> <manishkalonia85@xxxxxxxxx> wrote: > >> > Marvin, > >> > > >> > I installed the required RPMs. I have some issues with that. I cannot > >> > see any link for agrsm drivers to be activated in my sound setup. Also > >> > my headphones and mic jack is not working. Lately when I applied the > >> > same RPMs to OpenSuse 11.1, the headphones and mic jack were working > >> > pretty fine, but not with this distro/kernel. Also, the system is always > >> > using pulse audio as default. It is not using alsa or agrsm. It is not > >> > even showing me any link for agrsm. In OpenSuse 11.1 it showed me a > >> > device with name HW0:0, which I thought could be agrsm driver. > >> > > >> > I hope you can help me with this one too as you did lately. > >> > > >> > Thanks in advance > >> > > >> > Manish Kalonia > >> > > >> > On Wed, 2009-10-07 at 23:00 -0400, Marvin Stodolsky wrote: > >> >> Manish, > >> >> > >> >> Re: Linux version 2.6.30.8-64.fc11.i686.PAE > >> >> the most recent reported success for the 11c11040 chipsets is at the > >> >> 2.6.27 level, > >> >> unless Bjorn or Zsolt have more recent into. > >> >> > >> >> The latest code is at: http://linux.zsolttech.com/linmodem/agrsm/Testing/ > >> >> There may be issues of ALSA version matching too. > >> >> > >> >> Newer Linux installation are often backward compatible to older kernels. > >> >> So you might if necessary try a 2.6.27 kernel + headers for > >> >> compilation on your current installation. > >> >> > >> >> MarvS > >> >> > >> >> > >> >> > >> >> ---------- Forwarded message ---------- > >> >> From: Manish Kalonia <manishkalonia85@xxxxxxxxx> > >> >> Date: Wed, Oct 7, 2009 at 10:14 PM > >> >> Subject: Re: Installation of agrsm modules on fedora 11 2.6.29/2.6.30 kernels > >> >> To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > >> >> > >> >> > >> >> Hi Marvin, > >> >> > >> >> PFA the necessary ModemData.txt file. > >> >> > >> >> Regards, > >> >> Manish Kalonia > >> >> > >> >> On Wed, 2009-10-07 at 18:43 -0400, Marvin Stodolsky wrote: > >> >> > Send the List the new ModemData.txt > >> >> > We have to know details of your Environment > >> >> > > >> >> > Marvin > >> >> > > >> >> > On Wed, Oct 7, 2009 at 3:41 PM, Manish Kalonia > >> >> > <manishkalonia85@xxxxxxxxx> wrote: > >> >> > > Hi Marvin, > >> >> > > > >> >> > > Sorry to trouble you again on the same thing. But I want the agrsm > >> >> > > module to be installed on fedora 11. You helped me out lately on the > >> >> > > same problem on OpenSuse 11.1. > >> >> > > > >> >> > > It will be of great help if you can help me on this too. > >> >> > > > >> >> > > Thanks and Regards, > >> >> > > Manish Kalonia > >> >> > > > >> >> > > > >> > > >> > > > > >
