Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64,
Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009
scanModem update of: 2009_09_15
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems. Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 04f2:b044 Chicony Electronics Co., Ltd
ID 08ff:1600 AuthenTec, Inc. AES1600
ID 19d2:fff5
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:293e 1025:0260 Audio device: Intel Corporation 82801I
Modem interrupt assignment and sharing:
22: 1946 1744 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 1.318071] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6700000-0xd6703fff]
[ 1.318100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.318103] pci 0000:00:1b.0: PME# disabled
[ 80.902329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 80.902399] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.18
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1
00-03: INTEL HDMI : INTEL HDMI : playback 1
00-04: ALC888 Analog : ALC888 Analog : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xd6700000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x10250260
Revision Id: 0x100200
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c11040
If not a Conexant modem, the driver agrsm with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=1025:0260
IRQ=22
HDA=8086:293e
SOFT=8086:293e.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801I
Primary device ID: 8086:293e
Subsystem PCI_id 1025:0260
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
There is no agrsm software support for x86_64 systems, through the modem may be
supported on Intel/i386 installations, which do more slowly servce x86_64 processors.
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrsm driver pair.
One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Thereat get the agrsm_howto.txt and one of the agrsm-tools packages.
The initial agrsm_howto.txt compiling steps are only cogent to modems with PCI IDs:
11c1:0620, 11c1:048c and 11c1:048f chips.
They use the agrsm-20090418.tar.gz package.
The agrsm-tools sets a useful symbolic link and a agrsm-test utlity
For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition Audio cards, there may be support
through the agrsm resources (providing an agrmodem + agrserial driver pair) as an alternative to usage
of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem chip, ONLY the agrsm code is competent.
Your Linux distro's dkms package should be first installed, as it directs the installation of modem
specific dkms-agrsm resources, and also directs auto-installation of new drivers upon kernel upgrades.
Currently, the dkms-agrsm code is NOT competent for 2.26.28 and later kernels.
A short term fix is to install linux-image + linux-headers packages for earlier kernels.
For detailed instructions for Ubuntu Jaunty with 2.6.28 kernels, see http://linmodems.technion.ac.il/bigarch/archive-nineth/msg01316.html
The primary dkms-agrsm resource site is http://linux.zsolttech.com/linmodem/agrsm/
whereat a few different packaging types are available. Debian type installers (supporting Ubuntu too)
are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ . Thereat the current package
is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted on High Definition Audio cards.
Read the Modem/DOCs/Agrsm.txt for details.
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3
The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-11-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 321600 2009-02-20 18:26 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 81881 83872 IO-APIC-edge timer
1: 564 525 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 1200 1105 IO-APIC-fasteoi acpi
12: 139970 137524 IO-APIC-edge i8042
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb6
20: 3463 3612 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb7
21: 14 12 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb4
22: 1946 1744 IO-APIC-fasteoi HDA Intel
23: 8533 8498 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
2298: 52262 49655 PCI-MSI-edge i915@pci:0000:00:02.0
2299: 126 147 PCI-MSI-edge iwlagn
2300: 6375 6486 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 48989 60821 Local timer interrupts
RES: 40688 45876 Rescheduling interrupts
CAL: 93 79 Function call interrupts
TLB: 1176 3082 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb96c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb96c000 - 00000000bb9bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb9bf000 - 00000000bba83000 (usable)
[ 0.000000] BIOS-e820: 00000000bba83000 - 00000000bbabf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bbabf000 - 00000000bbaea000 (usable)
[ 0.000000] BIOS-e820: 00000000bbaea000 - 00000000bbaff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bbaff000 - 00000000bbb00000 (usable)
[ 0.000000] BIOS-e820: 00000000bbb00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbbb00 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable)
[ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bb96c000 (usable)
[ 0.000000] modified: 00000000bb96c000 - 00000000bb9bf000 (reserved)
[ 0.000000] modified: 00000000bb9bf000 - 00000000bba83000 (usable)
[ 0.000000] modified: 00000000bba83000 - 00000000bbabf000 (ACPI NVS)
[ 0.000000] modified: 00000000bbabf000 - 00000000bbaea000 (usable)
[ 0.000000] modified: 00000000bbaea000 - 00000000bbaff000 (ACPI data)
[ 0.000000] modified: 00000000bbaff000 - 00000000bbb00000 (usable)
[ 0.000000] modified: 00000000bbb00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bbb00000
[ 0.000000] 0000000000 - 00bba00000 page 2M
[ 0.000000] 00bba00000 - 00bbb00000 page 4k
[ 0.000000] kernel direct mapping tables up to bbb00000 @ 10000-15000
[ 0.000000] last_map_addr: bbb00000 end: bbb00000
[ 0.000000] RAMDISK: 7f835000 - 7ffff0cd
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 ACRSYS)
[ 0.000000] ACPI: XSDT BBAFE120, 0064 (r1 ACRSYS ACRPRDCT 1 1000013)
[ 0.000000] ACPI: FACP BBAFD000, 00F4 (r4 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: DSDT BBAEC000, B4D7 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: FACS BBA8F000, 0040
[ 0.000000] ACPI: HPET BBAFC000, 0038 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: APIC BBAFB000, 006C (r2 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: MCFG BBAFA000, 003C (r1 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: ASF! BBAF9000, 00A5 (r32 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: SLIC BBAF8000, 0176 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: BOOT BBAEB000, 0028 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
[ 0.000000] ACPI: SSDT BBAEA000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bbb00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0]
[ 0.000000] #3 [007f835000 - 007ffff0cd] RAMDISK ==> [007f835000 - 007ffff0cd]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000008
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x000bb96c
[ 0.000000] 0: 0x000bb9bf -> 0x000bba83
[ 0.000000] 0: 0x000bbabf -> 0x000bbaea
[ 0.000000] 0: 0x000bbaff -> 0x000bbb00
[ 0.000000] On node 0 totalpages: 768481
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2539 pages reserved
[ 0.000000] DMA zone: 1378 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10455 pages used for memmap
[ 0.000000] DMA32 zone: 754053 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bb96c000 - 00000000bb9bf000
[ 0.000000] PM: Registered nosave memory: 00000000bba83000 - 00000000bbabf000
[ 0.000000] PM: Registered nosave memory: 00000000bbaea000 - 00000000bbaff000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 755431
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.556 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] allocated 31457280 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2975180k/3075072k available (4760k kernel code, 1148k absent, 98084k reserved, 2540k data, 536k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.11 BogoMIPS (lpj=8778224)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.006764] ACPI: Checking initramfs for custom DSDT
[ 0.328053] Setting APIC routing to flat
[ 0.328435] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.370762] CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a
[ 0.372001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4388.95 BogoMIPS (lpj=8777916)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.456464] CPU1: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a
[ 0.456485] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.460046] Brought up 2 CPUs
[ 0.460048] Total of 2 processors activated (8778.07 BogoMIPS).
[ 0.460094] CPU0 attaching sched-domain:
[ 0.460097] domain 0: span 0-1 level MC
[ 0.460099] groups: 0 1
[ 0.460104] CPU1 attaching sched-domain:
[ 0.460105] domain 0: span 0-1 level MC
[ 0.460107] groups: 1 0
[ 0.460175] net_namespace: 1400 bytes
[ 0.460175] Booting paravirtualized kernel on bare hardware
[ 0.460264] Time: 3:11:22 Date: 10/12/09
[ 0.460264] regulator: core version 0.5
[ 0.460264] NET: Registered protocol family 16
[ 0.460264] ACPI: bus type pci registered
[ 0.460264] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.460264] PCI: MCFG area at f8000000 reserved in E820
[ 0.463000] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.463002] PCI: Using configuration type 1 for base access
[ 0.465275] ACPI: EC: Look up EC in DSDT
[ 0.569211] ACPI: BIOS _OSI(Linux) query ignored
[ 0.568018] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.588028] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1.088006] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.092220] ACPI: Interpreter enabled
[ 1.092222] ACPI: (supports S0 S3 S4 S5)
[ 1.092243] ACPI: Using IOAPIC for interrupt routing
[ 1.317379] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 1.317381] ACPI: EC: driver started in poll mode
[ 1.317606] ACPI: No dock devices found.
[ 1.317618] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.317701] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 1.317707] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
[ 1.317711] pci 0000:00:02.0: reg 20 io port: [0x50f0-0x50f7]
[ 1.317741] pci 0000:00:02.1: reg 10 64bit mmio: [0xd3400000-0xd34fffff]
[ 1.317839] pci 0000:00:1a.0: reg 20 io port: [0x50c0-0x50df]
[ 1.317914] pci 0000:00:1a.1: reg 20 io port: [0x50a0-0x50bf]
[ 1.317986] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd6705c00-0xd6705fff]
[ 1.318025] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.318029] pci 0000:00:1a.7: PME# disabled
[ 1.318071] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6700000-0xd6703fff]
[ 1.318100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.318103] pci 0000:00:1b.0: PME# disabled
[ 1.318151] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.318154] pci 0000:00:1c.0: PME# disabled
[ 1.318202] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.318206] pci 0000:00:1c.1: PME# disabled
[ 1.318254] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.318257] pci 0000:00:1c.2: PME# disabled
[ 1.318323] pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
[ 1.318396] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
[ 1.318469] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
[ 1.318540] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd6705800-0xd6705bff]
[ 1.318579] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.318583] pci 0000:00:1d.7: PME# disabled
[ 1.318748] pci 0000:00:1f.2: reg 10 io port: [0x50e8-0x50ef]
[ 1.318754] pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff]
[ 1.318759] pci 0000:00:1f.2: reg 18 io port: [0x50e0-0x50e7]
[ 1.318764] pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb]
[ 1.318770] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 1.318775] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd6705000-0xd67057ff]
[ 1.318789] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.318793] pci 0000:00:1f.2: PME# disabled
[ 1.318822] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd6706000-0xd67060ff]
[ 1.318836] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 1.318887] pci 0000:00:1f.6: reg 10 64bit mmio: [0xd6704000-0xd6704fff]
[ 1.318969] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
[ 1.318973] pci 0000:00:1c.0: bridge 32bit mmio: [0xd5700000-0xd66fffff]
[ 1.318978] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd13fffff]
[ 1.319081] pci 0000:04:00.0: reg 10 64bit mmio: [0xd4600000-0xd4601fff]
[ 1.319153] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.319163] pci 0000:04:00.0: PME# disabled
[ 1.319227] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 1.319230] pci 0000:00:1c.1: bridge 32bit mmio: [0xd4600000-0xd56fffff]
[ 1.319236] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1400000-0xd23fffff]
[ 1.319290] pci 0000:05:00.0: reg 10 64bit mmio: [0xd3500000-0xd353ffff]
[ 1.319298] pci 0000:05:00.0: reg 18 io port: [0x1000-0x107f]
[ 1.319336] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.319340] pci 0000:05:00.0: PME# disabled
[ 1.319392] pci 0000:00:1c.2: bridge io port: [0x1000-0x2fff]
[ 1.319395] pci 0000:00:1c.2: bridge 32bit mmio: [0xd3500000-0xd45fffff]
[ 1.319401] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd2400000-0xd33fffff]
[ 1.319449] pci 0000:00:1e.0: transparent bridge
[ 1.319476] bus 00 -> node 0
[ 1.319486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.320030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 1.320213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 1.320395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 1.328117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.328282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.328445] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.328608] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.328772] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.328935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 1.329102] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.329265] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.329573] ACPI: WMI: Mapper loaded
[ 1.329610] SCSI subsystem initialized
[ 1.329610] libata version 3.00 loaded.
[ 1.329610] usbcore: registered new interface driver usbfs
[ 1.329610] usbcore: registered new interface driver hub
[ 1.329610] usbcore: registered new device driver usb
[ 1.329610] PCI: Using ACPI for IRQ routing
[ 1.340011] Bluetooth: Core ver 2.13
[ 1.340022] NET: Registered protocol family 31
[ 1.340022] Bluetooth: HCI device and connection manager initialized
[ 1.340022] Bluetooth: HCI socket layer initialized
[ 1.340022] NET: Registered protocol family 8
[ 1.340022] NET: Registered protocol family 20
[ 1.340034] NetLabel: Initializing
[ 1.340036] NetLabel: domain hash size = 128
[ 1.340037] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.340051] NetLabel: unlabeled traffic allowed by default
[ 1.340075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.340079] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.344065] AppArmor: AppArmor Filesystem Enabled
[ 1.348011] Switched to high resolution mode on CPU 0
[ 1.348521] Switched to high resolution mode on CPU 1
[ 1.356007] pnp: PnP ACPI init
[ 1.356015] ACPI: bus type pnp registered
[ 1.464667] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.2 BAR 7 (0x1000-0x2fff), disabling
[ 1.465761] pnp: PnP ACPI: found 9 devices
[ 1.465762] ACPI: ACPI bus type pnp unregistered
[ 1.465771] system 00:01: ioport range 0x600-0x60f has been reserved
[ 1.465773] system 00:01: ioport range 0x610-0x610 has been reserved
[ 1.465775] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.465777] system 00:01: ioport range 0x810-0x817 has been reserved
[ 1.465779] system 00:01: ioport range 0x820-0x823 has been reserved
[ 1.465781] system 00:01: ioport range 0x400-0x47f has been reserved
[ 1.465783] system 00:01: ioport range 0x500-0x57f has been reserved
[ 1.465785] system 00:01: ioport range 0xff2c-0xff2f has been reserved
[ 1.465787] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 1.465789] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.465791] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 1.465793] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.465795] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.465797] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 1.465799] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 1.465801] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.470459] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.470461] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 1.470466] pci 0000:00:1c.0: MEM window: 0xd5700000-0xd66fffff
[ 1.470470] pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d13fffff
[ 1.470476] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 1.470479] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 1.470483] pci 0000:00:1c.1: MEM window: 0xd4600000-0xd56fffff
[ 1.470486] pci 0000:00:1c.1: PREFETCH window: 0x000000d1400000-0x000000d23fffff
[ 1.470492] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 1.470495] pci 0000:00:1c.2: IO window: 0x1000-0x2fff
[ 1.470499] pci 0000:00:1c.2: MEM window: 0xd3500000-0xd45fffff
[ 1.470502] pci 0000:00:1c.2: PREFETCH window: 0x000000d2400000-0x000000d33fffff
[ 1.470508] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 1.470510] pci 0000:00:1e.0: IO window: disabled
[ 1.470514] pci 0000:00:1e.0: MEM window: disabled
[ 1.470517] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.470528] pci 0000:00:1c.0: enabling device (0001 -> 0003)
[ 1.470534] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.470539] pci 0000:00:1c.0: setting latency timer to 64
[ 1.470547] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.470550] pci 0000:00:1c.1: setting latency timer to 64
[ 1.470557] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.470561] pci 0000:00:1c.2: setting latency timer to 64
[ 1.470566] pci 0000:00:1e.0: setting latency timer to 64
[ 1.470569] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.470571] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.470573] bus: 02 index 0 io port: [0x4000-0x4fff]
[ 1.470574] bus: 02 index 1 mmio: [0xd5700000-0xd66fffff]
[ 1.470576] bus: 02 index 2 mmio: [0xd0400000-0xd13fffff]
[ 1.470577] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.470578] bus: 04 index 0 io port: [0x3000-0x3fff]
[ 1.470580] bus: 04 index 1 mmio: [0xd4600000-0xd56fffff]
[ 1.470581] bus: 04 index 2 mmio: [0xd1400000-0xd23fffff]
[ 1.470582] bus: 04 index 3 mmio: [0x0-0x0]
[ 1.470584] bus: 05 index 0 io port: [0x1000-0x2fff]
[ 1.470585] bus: 05 index 1 mmio: [0xd3500000-0xd45fffff]
[ 1.470587] bus: 05 index 2 mmio: [0xd2400000-0xd33fffff]
[ 1.470588] bus: 05 index 3 mmio: [0x0-0x0]
[ 1.470590] bus: 06 index 0 mmio: [0x0-0x0]
[ 1.470591] bus: 06 index 1 mmio: [0x0-0x0]
[ 1.470592] bus: 06 index 2 mmio: [0x0-0x0]
[ 1.470593] bus: 06 index 3 io port: [0x00-0xffff]
[ 1.470595] bus: 06 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.470602] NET: Registered protocol family 2
[ 1.504053] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.504686] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.507623] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.508295] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.508298] TCP reno registered
[ 1.520135] NET: Registered protocol family 1
[ 1.520251] checking if image is initramfs... it is
[ 2.151744] Freeing initrd memory: 7976k freed
[ 2.155860] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 2.155863] Simple Boot Flag at 0x44 set to 0x1
[ 2.156185] audit: initializing netlink socket (disabled)
[ 2.156213] type=2000 audit(1255317083.156:1): initialized
[ 2.163747] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.164810] VFS: Disk quotas dquot_6.5.1
[ 2.164857] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.165309] fuse init (API version 7.10)
[ 2.165371] msgmni has been set to 5827
[ 2.165509] alg: No test for stdrng (krng)
[ 2.165517] io scheduler noop registered
[ 2.165519] io scheduler anticipatory registered
[ 2.165520] io scheduler deadline registered
[ 2.165553] io scheduler cfq registered (default)
[ 2.165564] pci 0000:00:02.0: Boot video device
[ 2.421347] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.421388] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.421418] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 2.421431] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.421442] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.421451] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.421511] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.421550] pcieport-driver 0000:00:1c.1: found MSI capability
[ 2.421577] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 2.421590] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.421602] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.421611] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 2.421670] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.421710] pcieport-driver 0000:00:1c.2: found MSI capability
[ 2.421736] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 2.421749] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 2.421759] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 2.421768] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 2.421832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.421931] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.433317] ACPI: AC Adapter [AC] (on-line)
[ 4.228106] ACPI: Battery Slot [BAT0] (battery present)
[ 4.228172] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 4.228174] ACPI: Power Button (FF) [PWRF]
[ 4.228214] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C0C:00/input/input1
[ 4.228216] ACPI: Power Button (CM) [PWRB]
[ 4.228250] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C0D:00/input/input2
[ 4.228315] ACPI: Lid Switch [LID0]
[ 4.228352] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C0E:00/input/input3
[ 4.228354] ACPI: Sleep Button (CM) [SLPB]
[ 4.229088] ACPI: SSDT BB98DC98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 4.229635] ACPI: SSDT BB98B598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 4.230182] Monitor-Mwait will be used to enter C-1 state
[ 4.230184] Monitor-Mwait will be used to enter C-2 state
[ 4.230196] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 4.230218] processor ACPI_CPU:00: registered as cooling_device0
[ 4.230221] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.230714] ACPI: SSDT BB98CE18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)
[ 4.231208] ACPI: SSDT BB98DF18, 008D (r1 PmRef ApCst 3000 INTL 20051117)
[ 4.231833] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 4.231847] processor ACPI_CPU:01: registered as cooling_device1
[ 4.231849] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.354576] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.380038] ACPI: Thermal Zone [TZ01] (49 C)
[ 4.416731] Linux agpgart interface v0.103
[ 4.416737] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 4.417521] brd: module loaded
[ 4.417775] loop: module loaded
[ 4.417828] Fixed MDIO Bus: probed
[ 4.417833] PPP generic driver version 2.4.2
[ 4.417876] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 4.417898] Driver 'sd' needs updating - please use bus_type methods
[ 4.417907] Driver 'sr' needs updating - please use bus_type methods
[ 4.417937] ahci 0000:00:1f.2: version 3.0
[ 4.417951] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.417984] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X
[ 4.418042] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 4.418045] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
[ 4.418049] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.418219] scsi0 : ahci
[ 4.418291] scsi1 : ahci
[ 4.418334] scsi2 : ahci
[ 4.418376] scsi3 : ahci
[ 4.418485] ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 2300
[ 4.418488] ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 2300
[ 4.418489] ata3: DUMMY
[ 4.418490] ata4: DUMMY
[ 4.896011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.896803] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[ 4.896805] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.897761] ata1.00: configured for UDMA/133
[ 5.396011] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.397481] ata2.00: ATAPI: MATSHITADVD-RAM UJ880AS, 1.00, max UDMA/33
[ 5.399983] ata2.00: configured for UDMA/33
[ 5.416100] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 5.416175] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 5.416189] sd 0:0:0:0: [sda] Write Protect is off
[ 5.416191] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.416212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.416266] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 5.416278] sd 0:0:0:0: [sda] Write Protect is off
[ 5.416279] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.416299] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.416302] sda: sda1 sda2
[ 5.745560] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.745601] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.748113] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ880AS 1.00 PQ: 0 ANSI: 5
[ 5.750268] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.750270] Uniform CD-ROM driver Revision: 3.20
[ 5.750340] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.750370] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.750848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.750867] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 5.750879] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.750882] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.750937] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.754857] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.754863] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 5.754875] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd6705c00
[ 5.768006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.768060] usb usb1: configuration #1 chosen from 1 choice
[ 5.768080] hub 1-0:1.0: USB hub found
[ 5.768086] hub 1-0:1.0: 4 ports detected
[ 5.768173] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.768182] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.768185] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.768221] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.772128] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.772133] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.772143] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6705800
[ 5.784006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.784052] usb usb2: configuration #1 chosen from 1 choice
[ 5.784072] hub 2-0:1.0: USB hub found
[ 5.784077] hub 2-0:1.0: 6 ports detected
[ 5.784150] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.784161] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.784179] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.784185] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.784188] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.784218] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.784251] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0
[ 5.784310] usb usb3: configuration #1 chosen from 1 choice
[ 5.784330] hub 3-0:1.0: USB hub found
[ 5.784335] hub 3-0:1.0: 2 ports detected
[ 5.784401] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.784406] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.784409] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.784439] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.784463] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
[ 5.784527] usb usb4: configuration #1 chosen from 1 choice
[ 5.784545] hub 4-0:1.0: USB hub found
[ 5.784550] hub 4-0:1.0: 2 ports detected
[ 5.784617] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.784622] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.784625] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.784660] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.784683] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 5.784739] usb usb5: configuration #1 chosen from 1 choice
[ 5.784758] hub 5-0:1.0: USB hub found
[ 5.784763] hub 5-0:1.0: 2 ports detected
[ 5.784829] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.784834] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.784837] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.784876] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.784905] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 5.784964] usb usb6: configuration #1 chosen from 1 choice
[ 5.784982] hub 6-0:1.0: USB hub found
[ 5.784987] hub 6-0:1.0: 2 ports detected
[ 5.785056] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 5.785062] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.785064] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.785095] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.785118] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005040
[ 5.785186] usb usb7: configuration #1 chosen from 1 choice
[ 5.785204] hub 7-0:1.0: USB hub found
[ 5.785209] hub 7-0:1.0: 2 ports detected
[ 5.785309] usbcore: registered new interface driver libusual
[ 5.785339] usbcore: registered new interface driver usbserial
[ 5.785346] USB Serial support registered for generic
[ 5.785357] usbcore: registered new interface driver usbserial_generic
[ 5.785359] usbserial: USB Serial Driver core
[ 5.785393] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 5.848214] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.848219] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.860031] mice: PS/2 mouse device common for all mice
[ 5.920051] rtc_cmos 00:03: RTC can wake from S4
[ 5.920081] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.920107] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.920156] device-mapper: uevent: version 1.0.3
[ 5.920240] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 5.920298] device-mapper: multipath: version 1.0.5 loaded
[ 5.920300] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.920415] cpuidle: using governor ladder
[ 5.920480] cpuidle: using governor menu
[ 5.920815] TCP cubic registered
[ 5.920868] NET: Registered protocol family 10
[ 5.921203] lo: Disabled Privacy Extensions
[ 5.921431] NET: Registered protocol family 17
[ 5.921449] Bluetooth: L2CAP ver 2.11
[ 5.921450] Bluetooth: L2CAP socket layer initialized
[ 5.921453] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.921454] Bluetooth: SCO socket layer initialized
[ 5.921480] Bluetooth: RFCOMM socket layer initialized
[ 5.921482] Marking TSC unstable due to TSC halts in idle
[ 5.921487] Bluetooth: RFCOMM TTY layer initialized
[ 5.921489] Bluetooth: RFCOMM ver 1.10
[ 5.922112] registered taskstats version 1
[ 5.922213] Magic number: 13:855:158
[ 5.922271] acpi device:25: hash matches
[ 5.922321] rtc_cmos 00:03: setting system clock to 2009-10-12 03:11:28 UTC (1255317088)
[ 5.922324] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.922325] EDD information not available.
[ 5.922375] Freeing unused kernel memory: 536k freed
[ 5.922583] Write protecting the kernel read-only data: 6708k
[ 5.960955] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 6.304114] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 6.821557] usb 2-2: configuration #1 chosen from 1 choice
[ 6.825487] Initializing USB Mass Storage driver...
[ 6.826889] scsi4 : SCSI emulation for USB Mass Storage devices
[ 6.827235] usbcore: registered new interface driver usb-storage
[ 6.827238] USB Mass Storage support registered.
[ 6.827334] usb-storage: device found at 3
[ 6.827336] usb-storage: waiting for device to settle before scanning
[ 6.932540] usb 2-4: new high speed USB device using ehci_hcd and address 4
[ 7.102000] usb 2-4: configuration #1 chosen from 1 choice
[ 7.344130] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 7.500101] Clocksource tsc unstable (delta = -370045795 ns)
[ 7.505656] usb 4-2: configuration #1 chosen from 1 choice
[ 7.744098] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 7.903907] usb 5-1: configuration #1 chosen from 1 choice
[ 7.919788] scsi5 : SCSI emulation for USB Mass Storage devices
[ 7.920988] usb-storage: device found at 2
[ 7.920990] usb-storage: waiting for device to settle before scanning
[ 11.024025] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 11.082975] ISO 9660 Extensions: RRIP_1991A
[ 11.405069] aufs 20080922
[ 11.667904] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 11.824331] usb-storage: device scan complete
[ 11.824366] isa bounce pool size: 16 pages
[ 11.824833] scsi 4:0:0:0: Direct-Access ChipsBnk Multi-Reader 4082 PQ: 0 ANSI: 2
[ 11.826524] sd 4:0:0:0: [sdb] 248320 512-byte hardware sectors: (127 MB/121 MiB)
[ 11.827062] sd 4:0:0:0: [sdb] Write Protect is off
[ 11.827065] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 11.827068] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 11.828410] sd 4:0:0:0: [sdb] 248320 512-byte hardware sectors: (127 MB/121 MiB)
[ 11.828898] sd 4:0:0:0: [sdb] Write Protect is off
[ 11.828900] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 11.828901] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 11.828905] sdb:
[ 11.830117] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 11.830202] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 12.922049] usb-storage: device scan complete
[ 12.925010] scsi 5:0:0:0: Direct-Access ZTE USB Storage FFF1 2.31 PQ: 0 ANSI: 2
[ 12.931670] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 12.931737] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 75.408009] udev: starting version 141
[ 75.790494] acpi device:0b: registered as cooling_device2
[ 75.790841] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/input/input6
[ 75.816658] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 76.335496] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 76.419722] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 76.420492] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 76.423726] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 76.660808] iTCO_vendor_support: vendor-support=0
[ 76.936654] cfg80211: Calling CRDA to update world regulatory domain
[ 77.475538] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 77.760015] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 77.760795] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 77.760887] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 77.902098] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 77.935044] acer-wmi: Unable to detect available WMID devices
[ 78.425104] Linux video capture interface: v2.00
[ 78.886829] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 79.031598] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 80.341751] cfg80211: World regulatory domain updated:
[ 80.341755] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 80.341757] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 80.341758] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 80.341760] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 80.341762] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 80.341763] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 80.354387] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 80.354390] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 80.354513] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 80.354543] iwlagn 0000:04:00.0: setting latency timer to 64
[ 80.354615] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 80.376815] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 80.376886] iwlagn 0000:04:00.0: irq 2299 for MSI/MSI-X
[ 80.379973] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[ 80.385686] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 80.421471] input: CNF7017 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9
[ 80.432672] usbcore: registered new interface driver uvcvideo
[ 80.432710] USB Video Class driver (v0.1.0)
[ 80.902329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 80.902399] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 93.743071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 93.743074] Bluetooth: BNEP filters: protocol multicast
[ 93.832319] Bridge firewalling registered
[ 102.746181] lp: driver loaded but no devices found
[ 102.816875] [drm] Initialized drm 1.1.0 20060810
[ 102.900036] ppdev: user-space parallel port driver
[ 102.974339] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 102.974344] pci 0000:00:02.0: setting latency timer to 64
[ 102.974564] pci 0000:00:02.0: irq 2298 for MSI/MSI-X
[ 102.974651] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 102.976972] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 105.424332] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 106.442819] Registered led device: iwl-phy0:radio
[ 106.442848] Registered led device: iwl-phy0:assoc
[ 106.442877] Registered led device: iwl-phy0:RX
[ 106.442900] Registered led device: iwl-phy0:TX
[ 106.940044] iwlagn: Error sending REPLY_ADD_STA: time out after 500ms.
[ 106.954054] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 109.845224] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 109.848666] mtrr: no MTRR for c0000000,10000000 found
[ 114.551173] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 165.828867] CPU0 attaching NULL sched-domain.
[ 165.828871] CPU1 attaching NULL sched-domain.
[ 165.840597] CPU0 attaching sched-domain:
[ 165.840601] domain 0: span 0-1 level MC
[ 165.840605] groups: 0 1
[ 165.840611] CPU1 attaching sched-domain:
[ 165.840614] domain 0: span 0-1 level MC
[ 165.840617] groups: 1 0
[ 244.565114] iwlagn: Radio Frequency Kill Switch is On:
[ 244.565118] Kill switch must be turned off for wireless networking to work.
[ 1760.704169] usb 5-1: USB disconnect, address 2
[ 1774.320141] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1774.535797] usb 3-1: configuration #1 chosen from 1 choice
[ 1774.548618] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1774.551036] usb-storage: device found at 2
[ 1774.551039] usb-storage: waiting for device to settle before scanning
[ 1779.549522] usb-storage: device scan complete
[ 1779.552496] scsi 6:0:0:0: CD-ROM ZTE USB Storage FFF1 2.31 PQ: 0 ANSI: 2
[ 1779.590495] sr1: scsi-1 drive
[ 1779.590668] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 1779.590773] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 1782.554575] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[ 1782.554593] sr: Sense Key : No Sense [current]
[ 1782.554598] sr: Add. Sense: No additional sense information
[ 1783.073588] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[ 1783.073607] sr: Sense Key : No Sense [current]
[ 1783.073612] sr: Add. Sense: No additional sense information
[ 1783.080598] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00
[ 1783.080615] sr: Sense Key : No Sense [current]
[ 1783.080620] sr: Add. Sense: No additional sense information
[ 1783.087590] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00
[ 1783.087606] sr: Sense Key : No Sense [current]
[ 1783.087611] sr: Add. Sense: No additional sense information
[ 1783.108604] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[ 1783.108622] sr: Sense Key : No Sense [current]
[ 1783.108627] sr: Add. Sense: No additional sense information
[ 1783.118605] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1783.123600] ISOFS: changing to secondary root
[ 2413.696197] usb 2-2: USB disconnect, address 3
Module Size Used by
nls_iso8859_1 13440 0
vfat 21120 0
fat 65592 1 vfat
binfmt_misc 18572 1
i915 75272 2
ppdev 16904 0
drm 123232 3 i915
lp 19588 0
parport 49584 2 ppdev,lp
bridge 63904 0
stp 11140 1 bridge
bnep 22912 2
input_polldev 12688 0
snd_hda_intel 557364 3
snd_pcm_oss 52352 0
snd_mixer_oss 24960 1 snd_pcm_oss
snd_pcm 99336 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 11524 0
arc4 10240 2
snd_seq_oss 41984 0
ecb 11392 2
snd_seq_midi 15744 0
snd_rawmidi 33920 1 snd_seq_midi
snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi
uvcvideo 69512 0
iwlagn 114820 0
snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
joydev 20864 0
snd_timer 34064 2 snd_pcm,snd_seq
compat_ioctl32 18304 1 uvcvideo
iwlcore 106496 1 iwlagn
videodev 45184 2 uvcvideo,compat_ioctl32
snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
v4l1_compat 23940 2 uvcvideo,videodev
iTCO_wdt 21712 0
snd 78792 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211 251144 2 iwlagn,iwlcore
psmouse 64028 0
soundcore 16800 1 snd
led_class 13064 1 iwlcore
cfg80211 43168 3 iwlagn,iwlcore,mac80211
serio_raw 14468 0
snd_page_alloc 18704 2 snd_hda_intel,snd_pcm
iTCO_vendor_support 12420 1 iTCO_wdt
intel_agp 39408 1
pcspkr 11136 0
video 29204 0
output 11648 1 video
squashfs 48656 1
aufs 193384 1
exportfs 13440 1 aufs
nls_cp437 15104 1
isofs 43688 2
usb_storage 94912 1
fbcon 49792 0
tileblit 11264 1 fbcon
font 17024 1 fbcon
bitblit 14464 1 fbcon
softcursor 10368 1 bitblit
Name of the Modem:
ZTE USB Modem FFF1 #3
