Ryan, Maybe it is time to change method. If you refer to the very first mails you exchanged with Antonio that you consciously stored in your Web server, you will notice that one version of the Intel driver you grabbed did not cause a NO DIALTONE error but after successfully dialing, it caused an error on reading and transmitting to your ISP password through the phone connection. If this driver comes from me, the .tar.gz or more recent .tar.bz2 is usually dated and, last but not least, the entire but the Intel provided binaries source code is provided. I can grant you there has strictly been no single change on the Intel provided binaries. First, I do respect Intel's will to protect its trade secrets. Next I am not equipped to do reverse engineering on compiled Windows assembly written language files, although I know and have used some Linux means to partly get information from these binaries. So it is your turn to now work. Dig onto your disk and into your directories to find out the Intel driver you were using at the very beginning of your mail exchanges with Antonio. Give each of the Intel .tar.gz or .tar.bz2 files found on your disk a try until you no longer get a NO DIALTONE. To avoid you useless expenses, retry each driver you test with the efax command dialing your personal phone number. This is a command I sent you. The expected result you must get with efax is a BUSY response. Kind regards, Philippe - http://vouters.dyndns.org:8080/ Philippe Vouters (Fontainebleau/France) Le vendredi 14 août 2009 à 16:58 +0100, Ryan a écrit : > Philippe and List, > > Sorry I have been away for so long, I was having a camping holiday for a few days with my family, > now the weather has turned bad (as it so often does in Ireland) and I have returned. > > This is what I did and the output I got: > ryan@Ryan:~$ sudo nano wvdial.conf > [sudo] password for ryan: > ryan@Ryan:~$ sudo wvdial -C $HOME/wvdial.conf tiscali > --> WvDial: Internet dialer version 1.55 > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Modem initialized. > --> Sending: ATDT08440575000 > --> Waiting for carrier. > ATDT08440575000 > NO DIALTONE > --> No dial tone. > --> Disconnecting at Fri Aug 14 16:15:35 2009 > ryan@Ryan:~$ > > Again with the NO DIALTONE error. > > Thanks for trying Philippe. > > > <> <> <> <> <> <> <> > Regards. > Ryan Mckeown > Northern Ireland, UK > > "Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest > of his life." - Terry Pratchett. > "If at first you don't succeed... So much for skydiving." - Henry Youngman. > "If one synchronised swimmer drowns, do all the rest have to drown too?" - Steven Wright. > "Whoever said 'nothings impossible' never tried to nail jell-o to a tree" - Lisa Bryant > > Visit my website at: > www.21stcenturychristians.co.uk > <> <> <> <> <> <> <> > > > > ----- Original Message ----- > From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx> > To: "Ryan" <ryanmckeown@xxxxxxxxxxx> > Cc: "Linmodems Discussion Group" <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky" > <marvin.stodolsky@xxxxxxxxx>; "Antonio Olivares" <olivares14031@xxxxxxxxx> > Sent: Sunday, August 09, 2009 4:54 PM > Subject: Re: NO DIALTONE > > > Ryan, > > Put this wvdial.conf in your home directory. > > [philippe@victor ~]$ cat wvdial.conf > [Modem0] > Modem = /dev/modem > Dial Command = ATDT > Init1= ATZ > Baud = 9600 > [Dialer tiscali] > Username = <your ISP Username> > Password = <Your ISP password> > Phone = 08440575000 > Stupid Mode = 1 > Inherits = Modem0 > > Then: > > $ sudo wvdial -C $HOME/wvdial.conf tiscali > - > http://vouters.dyndns.org:8080/ > Philippe Vouters (Fontainebleau/France) > > > Le mardi 04 août 2009 à 11:25 +0100, Ryan a écrit : > > All of the emails I sent and received regarding the issue are available here: > > http://ryanjames.l4rge.com/linmode. ms/linmodems-email.html > > or for those who dislike html: > > http://ryanjames.l4rge.com/linmodems/NO%20DIALTONE.txt > > > > NB: They both contain exactly the same information. > > NB2: I compiled both these files so EVERYONE at the list could see ALL of the emails we exchanged > > regarding my issue and therefore anyone at the list who read through the emails has a complete > > understanding of my issue and therefore, if they have an idea, they have the knowledge to know if > > it > > has already been tried or not. No need to search archives, just go to one of the above addresses > > and > > it is all there. > > > > > > <> <> <> <> <> <> <> > > Regards. > > Ryan Mckeown > > Northern Ireland, UK > > > > "Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the > > rest > > of his life." - Terry Pratchett. > > "If at first you don't succeed... So much for skydiving." - Henry Youngman. > > "If one synchronised swimmer drowns, do all the rest have to drown too?" - Steven Wright. > > "Whoever said 'nothings impossible' never tried to nail jell-o to a tree" - Lisa Bryant > > > > Visit my website at: > > www.21stcenturychristians.co.uk > > <> <> <> <> <> <> <> > > > > > > > > ----- Original Message ----- > > From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx> > > To: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>; "Antonio Olivares" <olivares14031@xxxxxxxxx> > > Cc: "Linmodems Discussion Group" <discuss@xxxxxxxxxxxxx> > > Sent: Monday, August 03, 2009 3:18 PM > > Subject: Re: NO DIALTONE > > > > > > > Marvin, Antonio, > > > > > > Attempt to retrieve from the discuss@xxxxxxxxxxxxx archive, Ryan's first > > > mails when he had troubles with wvdial and his ISP password not being > > > correctly entered because of the serial and 537EP drivers conflict. This > > > way you ought to retrieve which exact Init string Ryan was using. > > > > > > Hoping this can help. > > > - > > > http://vouters.dyndns.org:8080/ > > > Philippe Vouters (Fontainebleau/France) > > > > > > > > > Le lundi 03 août 2009 à 14:24 +0100, Ryan a écrit : > > >> Hey. > > >> > > >> Sorry I haven't replied to provide the output from the new driver for ages, but yea it > > >> responses > > >> in > > >> exactly the same way, I get the error: NO DIALTONE and I hear no sounds from the modem. > > >> > > >> > > >> <> <> <> <> <> <> <> > > >> Regards. > > >> Ryan Mckeown > > >> Northern Ireland, UK > > >> > > >> "Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the > > >> rest > > >> of his life." - Terry Pratchett. > > >> "If at first you don't succeed... So much for skydiving." - Henry Youngman. > > >> "If one synchronised swimmer drowns, do all the rest have to drown too?" - Steven Wright. > > >> "Whoever said 'nothings impossible' never tried to nail jell-o to a tree" - Lisa Bryant > > >> > > >> Visit my website at: > > >> www.21stcenturychristians.co.uk > > >> <> <> <> <> <> <> <> > > >> > > >> > > >> > > >> > > > > > > > > > > > >
