In light of Zsolt's recent packages, the 11c11040 HOWTO has essentially become deprecated for any kernel > 2.6.24. Sina, Please restore the original sound modules that shipped with your kernel. (ie. copy back the originals if you made a backup, or reinstall the relevant kernel packages via YAST if you did not.) You do not need to modify the sound drivers for recent versions of the modem package. I shall put together a source package for you (and others) that has worked successfully on my machine (openSuSE 11.1 as well, same modem). I will try to get it together tonight and have it to you by this time tomorrow. (sending is slow as I am on dial-up, and the source is ~500KB) Cheers, Bjorn. Antonio Olivares wrote: > Sina, > > Forwarding your message to Bjorn. He has had success with this modem, > and I hope he can advise you better with the problem regarding sound. > > Regards, > > Antonio > > ---------- Forwarded message ---------- > From: Sina Saeedi <saeedi.sina@xxxxxxxxx> > Date: Fri, 7 Aug 2009 14:55:59 +0430 > Subject: Re: Agere on openSUSE 11.1 > To: Antonio Olivares <olivares14031@xxxxxxxxx> > > On Jumee 16 Mordad 1388 04:49:41 you wrote: > > I read http://linmodems.technion.ac.il/packages/ltmodem/11c11040/HOWTO- > Agere-11c11040-HDA.html and do all the instructions. but when I restart my pc, > the sound is gone! I have no sound. And now when I try "make module" I get > this error (The Attached fikle). Please help. > > >> Sina, >> >> scanModem reports that you have 11c11040 chipset: >> >> Codec: LSI ID 1040 >> Address: 1 >> Vendor Id: 0x11c11040 >> Subsystem Id: 0x11c10001 >> Revision Id: 0x100200 >> Modem Function Group: 0x1 >> >> The audio card hosts a softmodem chip: 0x11c11040 >> If not a Conexant modem, the driver agrsm with its dependent drivers: >> >> ---------- >> provide audio + modem support with the modem chip residing on the >> subsystem. Any particular card can host any one of several soft modem >> chips. >> >> === Finished firmware and bootup diagnostics, next deducing cogent >> software. === Completed candidate modem analyses. >> >> The base of the UDEV device file system is: /dev/.udev >> >> Versions adequately match for the compiler installed: 4.3.2 >> and the compiler used in kernel assembly: 4.3 >> >> linux-headers-2.6.27.7-9-pae resources needed for compiling are not >> manifestly ready! >> >> If compiling is necessary packages must be installed, providing: >> kernel-source-2.6.27.7-9-pae >> >> You would need to install kernel headers/kernel development libraries >> to get it going: >> >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm-2.1.80 >> -2mdv2009.0.i586.rpm >> >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-tools-0.0.1 >> -2.noarch.rpm >> >> Download above files and hopefully you have dkms installed on your >> system. For Suse/OpenSUSE Bjorn is better suited to advice you since >> I am not familiar with procedures on how to get it going, there is a >> HOW TO, but the dkms package route would/should be easier. >> >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/HOWTO-Agere-11c11 >> 040-HDA.html >> >> I wish I could give you better more precise explanation, but I hope to >> at least give you something to help you get started. >> >> Regards, >> >> Antonio >> >> On 8/6/09, Sina Saeedi <saeedi.sina@xxxxxxxxx> wrote: >>> HI, I have an Agere System modem on an openSUSE. Please help me.
Attachment:
signature.asc
Description: OpenPGP digital signature
