B Baker,
scanModem reports the following information:
The dialer utility package WVDIAL does not appear to be installed on
your System.
Please read Modem/DOCs/wvdial.txt
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:0d.0 14f1:2013 155d:8850 Communication controller: Conexant
Systems, Inc. HSF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 02:0d.0 ----
[ 0.822028] pci 0000:02:0d.0: reg 10 32bit mmio: [0xf2000000-0xf200ffff]
[ 0.822037] pci 0000:02:0d.0: reg 14 io port: [0x2400-0x2407]
[ 0.822076] pci 0000:02:0d.0: PME# supported from D0 D3hot D3cold
[ 0.822082] pci 0000:02:0d.0: PME# disabled
The PCI slot 02:0d.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate modem in: 02:0d.0
0780 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem
Primary device ID: 14f1:2013
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_11_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Follow the directions given therein and report back if you have questions.
Regards,
Antonio
On 8/7/09, pestkop@xxxxxxxxx <pestkop@xxxxxxxxx> wrote:
>
>
> Hello,
> Enclosed is my error for trying to install a modem on my ubuntu operating
> system.
>
> Can you let me know my error.
>
> thank you,
> B Baker
>
